How do I recover or reset admin password used for the aspprotected pages. I have installed it months and months ago, but now can not recall the password. Any help appreciated, as I do not feel like installing it again.

It really means just what it says. Your connection string is just not valid and the sql server speicifed can not be reached. The username and password could also be invalid. Since you already had a database set up you should use the same username and password you have always been using. You also need to use the same database name you have always been using. Without actually knowing more and seeing what you are doing it is pretty hard to tell you anymore than that.

The directions and sql scripts given are for setting up a new sql database. Applying them to an existing sql database requires a slightly different approach. Modificiations to the SQL scripts elimintating references to the usernames/password/database we suggest in the scripts is also a good idea.

A data connection is a low level as it gets. Until you get that working you are really not even touching any of the code in the ASPListings application.

If you want I have no problem going into your sql server and web and setting up for you correctly.

Hello,

You are correct regarding what you noticed.. ASPBanner only allows one person to administrate. If if did what you are asking about it would probably cost more.
(you get the ASP source so if you really wanted that you could always add it on your own fairly easily, but it all depends on your skills)

AS for keyword advertising and different ads based on certain pages ASPBanner does not get into that. The main reason being performance as I built ASPBanner primarily as a performance banner rotation solution.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=144& ; ; ; ; ;PN=1

Like that thread says, you could make different zones for different conditions.. then surround the banner calling code with if else logic so a different banner zone was called under certain conditions.

Regardless, if you really need something that has every bell and whistle. BanManPro is where it is at.

Hi,

Sorry, but the way the system works you can not call an individual banner like that. It just not something the system was meant to do.

If you wanted a specific banner to show up at all times you would have to make an individual banner and a zone just for that.

After looking at your site since you have so many banners there I dont know if that is the greatest option for you. It would also put a lot of stress of the Version 7 software because it is not really meant to call so many banners zones at one time on one page.

If you could live with tracking clicks on the home page but not displays I would suggest making banners for the home page in one zone. Then hard coding the banner images into your homepage like you already do but linking to the tracking part of aspbanner instead of where they would usually link to. That way you could at least track clicks and there owuld be no performance issues.

for example.. one of the images might link to
http://www.poconocommuter.com/aspbanner/banner_redirect.asp? Banner_ID=4

which would track clicks for you.. and then send then wherever they are supposed to go

Hi,

I am just wondering if anyone else has had this problem. Even though the guestbook is empty, it takes just about 20 to 30 seconds for the guestbook/default.asp lto oad. Is this normal has anyone else has had this problem.

Thanks

You can't do that. ASPProtect 7 does not work with ASP.NET.

It is a classic ASP application. As the web site states it can only be used to protect ".asp" pages written using vbscript.

ASP and ASP.net are completely different animals.

Thats why we have a .NET version.
http://www.aspprotect.com/more_info_net.asp

If you have found out that parent paths are disabled on the web server you can still use the application.

Before you continue.

If it is your server consider enabling parent paths to solve the problem.

If it is not your server consider asking them to enable parent paths for your web site to solve the problem.

If that is not possible please download this zip file.
2005-02-20_150703_aspprotect_v7.x_alternate_include_file_pat hs.zip

This zip file contains 3 sets of alternate files depending on your situation. You simply replace your existing aspprotect v7.x files with these new ones.

The zip file contains the following folders and files.

Below is the contents of the readme.txt file which explains everything.

The following folders each have a version of all the files in the ASPProtect system that might need to be edited in case you need to change the paths for the server side include files. There are 3 different scenarios.

(parent paths enabled) - This is the way the application comes.
The files in this folder have FILE server side includes containing "../" information. While these includes will work when the applicaion in is any location of a website they will not work if parent paths are disabled on the web server. Generally you will want to use these on your xp development machine. You can of course use them on your real server if parent paths are enabled. Parent Paths are now disabled on II6 by default and some hosting company will not enable them.

(domain root)
The files in this folder have VIRTUAL server side includes in them.
These includes only work when the applicaion is installed in the root of your web domain. For example if your domain was called "www.somedomain.com" the following aspprotect files and folders would end up like this
"http://www.somedomain.com/check_user_inc.asp"
"http://www.somedomain.com/password_admin"
"http://www.somedomain.com/users"

(domain directory)
The files in this folder have VIRTUAL server side includes in them.
These includes only work when the applicaion is installed in a directory called "aspprotect" in the root of your web domain. For example if your domain was called "www.somedomain.com" the
following aspprotect files and folders would end up like this
"http://www.somedomain.com/aspprotect/check_user_inc.asp"
"http://www.somedomain.com/aspprotect/password_admin"
"http://www.somedomain.com/aspprotect/users"
You can change the name of the "aspprotect" directory but you will will have to edit the includes in the files.

Lastly, if you are on a local machine and insist on using the VIRTUAL INCLUDES you would also use the (domain directory files) even though you dont have a domain on your local machine most likely
For example if your site was installed like so.
"http://localhost/aspprotect/check_user_inc.asp"
"http://localhost/aspprotect/password_admin"
"http://localhost/aspprotect/users"

The file check_user_inc.asp as the lines: (which include Session("groups")

 Here we set some valus about the user into session variables
   Session("PasswordAccess") = "Yes"
   Session("Access_Level") = CmdCheckUser("Access_Level")
   Session("Admin") = CmdCheckUser("Admin")
   Session("Active") = CmdCheckUser("Active")
   Session("Expiration_Date") = Expiration_Date
   Session("User_ID") = CmdCheckUser("User_ID")
   Session("Groups") = CmdCheckUser("Groups")
   Session("Redirection_URL") = CmdCheckUser("Redirection_URL")
   Session("Password") = RC4(CmdCheckUser("Password"), PasswordEncryptionKey)
   Session("Username") = CmdCheckUser("Username")

New Power Supply and a new (CPU Fan/Heat Sink) seemed to do the the trick. She's running like a champ now...

Hopefully it keeps doing so. Only time will tell.

It she's stable I can get back to designing some new software.

where is your site ? I'll taka a look

I run F-secure on my laptop which has the anti-virus and firewall modules, and the servers aren't running anything like that.

Regarding hosting companies..

Now.. obviously if you are hosting on someone elses server you may not be able to set permissions like this.

Ultimately, if you are hosting somewhere and ASP and Database connectivity is part of your hosting plan. It is the hosting company's responsibility to set these permissions for you when asked or to give you a special interface to do so on your own. If they are not helping you do this then maybe it is time to get a hosting company that is serious about your ASP Hosting Needs.

Also... JUST TO BE PERFECTLY CLEAR

The permissions we are talking about cannot be set via FTP or Frontpage access to your web site. They must be set like shown above or via a special interface meant to set the permissions correctly. For all you people out there messing with the permissions you see in FTP and Frontpage.. you are wasting your time and possibly creating problems in your web.

All ASP scripts that communicate with an Access Database, Upload Pictures, Modify Text files.... are going to need these permissions set in some way or another. We have no control over that fact.

Glad it is working.. for anyone reading this the customer bascially did this
http://support.cjwsoft.com/forum/forum_posts.asp?TID=36& PN=1

That being said asp photo gallery actually has a few more places that send email that you going to need to modify as well. Off hand the reply to album, admin massemail, admin send email,and postcard features come to mind possibly as 3 of them.

using a multiple file search and replace utility like ReplaceEm would be the easy way to do all of this in one step and find all the instances

http://www.orbit.org/replace/

If you are using version 6 CDOSYS is not supported. That is one reason why version 7 came out. If you want to rewrite the code to work with CDOSYS in version 6 that is something you need to sort out on your own as I do not support custimization to the code.

I apologize if I've missed this, but I would love to see the ability to auto-e-mail the advertiser at some randomly set interval before the banner expires. Ideally, I would also be cc'd on this e-mail so I can stay in touch. If the advertiser wants to renew, I can receive payment and change the expiration date without their banner ever falling out of service.

Since e-mail is already built into the program, would it be difficult to add a routine that checks for expiring banners at some daily interval, and contacts the advertiser?

To get really fancy, the e-mail could include the ability for me to add a button for paypal, allowing the advertiser to easily click and send off another payment.

Best,

Wayne

Triple check the upgrade instructions because I think you missed something important.

line 227 on "/password_admin/save.asp" refers to the "Password" field

the error your getting most likely means it is not there..

Pay close attention to the areas in the upgrade instructions regarding renaming your existing "Password" field to "Old_Password"

Then making a new "Password" field and carefully following the instructions needed to convert your old passwords for use with the new system.

If you don't everything carefully and perfectly this is the sort of error you will get.

Thanks very much for the tip. I'm a beginner with all this stuff so forgive me for the inate stupidity!

By the way, I think the system is great and I am very pleased my purchase.

grrrrrr

As far as the users thing... my fault that was setup wrong in the settings of the admin login page.

but still dont have a solution for what im trying to do

Here are three known bugs and their fixes...

If you have any of these symptoms these fixes will most likely take care of them.
If you don't have a symptom do not make any changes as you most likely have an updated copy of the application.

Technically if you bought that app on or after April 27th 2004 these bugs should all have been corrected.

Description Fix

(no descriptions showing in pop up window)

Edit pic_window.asp with a text editor

Change

Set f=fs.OpenTextFile(Server.MapPath("pictures/Album_ID_" & Album_ID & ".txt"), 1)

To

Set f=fs.OpenTextFile(Server.MapPath("../pictures/Album_ID_" & Album_ID & ".txt"), 1)

Slideshow Fix…

(last image in slideshow it not showing)

In slideshow.asp

Change

<% For PicArrayIndex = 0 To Ubound(PicArray) - 1 %>

To

<% For PicArrayIndex = 0 To Ubound(PicArray) %>

Add To Favorites fix

(add to favorites feature doesn’t work at all)

Edit "album_uppermenu_inc.asp" in the scripts folder

Change

<a href="users/favorite_albums.asp?Album_ID=<% =Album_ID %>"><img border="0" src="<% =application("skinpath") %>add_to_favorites.gif"></a>

To

<a href="users/favorite_albums.asp?Album_ID=<% =Album_ID %>&Action=Add_To_Favorites"><img border="0" src="<% =application("skinpath") %>add_to_favorites.gif"></a>

Now, we can connect to the MySQL database with ASPBanner using the following connection string if we like.

"driver={MySQL ODBC 3.51 Driver};server=localhost;port=3306;uid=root;pwd=temp;databas e=aspbanner;option=16386"

But we really do not want to connect to the aspbanner MySQL database using the "root" account

So, lets make an account to use..

In MySQL Administrator select "User Administration"

Down below you will see the user "root"

Right click on "root" and select "Add new user"



Type in a New MySQL Username and Password

I am going to call my new user "aspbanneruser"

Hit the Schema Privileges" tab



In this case since I am using the root account to manage my MySQL system I am just going to give this new user account what it needs to use the aspbanner database.. you may want to apply more permissions to the new account, that is up to you.. I am giving the new user (select, insert, update, delete, execute) So I right click on the aspbanner and then bring over the permissions I need for it.. and hit apply changes down in the bottom right.

We can now connect to the aspbanner MySQL database using this new account like so.

"driver={MySQL ODBC 3.51 Driver};server=localhost;port=3306;uid=aspbanneruser;pwd=tem p;databas e=aspbanner;option=16386"

------------------------------------------------------------ -----
article still in the process of being written (3/14/06)

Please Note : ASPProtect v7.x has a new feature called groups that is much more powerful than access levels. Access Levels were left in the product primarily for existing customers that upgrade to the new version so they do not need to make a lot of changes to their site if they were using Access Levels.


More On Access Levels

Again, Examples of managing Access Levels are provided in the "multiple_access_levels" folder included in the root of the Password System. Look at the source code of the ASP pages in that folder with a text editor to see the working code.

Access Levels and how they work can be re-coded to work in many different ways. However, you have to be a good ASP developer to make changes to it. Here is some information on how they work by default.

In the "check_user_inc.asp" that comes in the root of this system Access Levels work as follows.

Level 1 has Access to - Level 1
Level 2 has Access to - Level 1,2
Level 3 has Access to - Level 1,2,3
Level 4 has Access to - Level 1,2,3,4
Level 5 has Access to - Level 1,2,3,4,5
Level 6 has Access to - Level 1,2,3,4,5,6
Level 7 has Access to - Level 1,2,3,4,5,6,7
Level 8 has Access to - Level 1,2,3,4,5,6,7,8
ADMIN has Access to - Level 1,2,3,4,5,6,7,8,ADMIN

Here is some additional info..

If the access levels are too restrictive you can ignore them all together and create your own totally custom solutions.
Here is a quick rundown of some of the things you can do.

Ok... so if you want to be really specific about what each user can see and
can't .. here's an example of what you can do

Don't use the access levels before the include file..
Don't worry about what you set a user to in the admin area since the access levels won't be used.

Do something like this..

Every time a user logs in session variables are set that you can access at
any time.. thus allowing you to know who they are.

So you could do something like this...


<%@ LANGUAGE="VBSCRIPT" %>

<!--#INCLUDE FILE="check_user_inc.asp"-->

<%
If Session("USERNAME") = "bob1267" or Session("USERNAME") = "carl45" or Session("ADMIN") = "True" Then
Session("PASSWORDACCESS") = "Yes"
Else
Session("PASSWORDACCESS") = "No"
Response.Redirect(Request.ServerVariables("script_name"))
End If
%>

The following URL explains what Redirects are.
http://www.powerasp.com/content/code-snippets/redirects.asp

That would in effect create totally custom access levels.. but you would
have to do it manually for each user.

You can also do things like this after a person logs in

Show custom html to any specific user based on either their username or
access level ... like so

say there was a menu and a certain link should only show up to username
"paully67"

you could do something like this


<HTML>
<HEAD>
<TITLE></TITLE>
</HEAD>
<BODY>


<br>
<a href="main.asp">Home Page</a>
<%
If Session("USERNAME") = "paully67" Then
%>
<br>
<a href="paullys_page.asp">Pauls Stats Page</a>
<%
End If
%>
<br>
<a href="links.asp">Links Page</a>

</BODY>
</HTML>

Or you can show custom HTML or links based on Access Levels or any other info.

You can do just about anything with if-then statements and
using the built in vbscript functions..

Hopefully this info will help to give you some ideas...

Bottom line is you have to do some work within your site to make the Access Level system really come alive.

I'm having an issue importing. It moves the images from the /import folder and creates the thumbnails with no problem, but the full-size photos all have a size of 0 bytes.

http://www.larrysampas.com/gallery2/default.asp?CatLevel=2&a mp;Cat1_ID=1

that is because passwords in the import/export files are encrypted.. if you make one of your own you need to use the rc4 function in the "config_inc.asp" to encrpyt your passwords just like the aspprotect system does (requires knowledge of vbscript and integration into your export system)

now, there is a way around this

if you want to import a file you made with clear text passwords edit "import.asp" beforehand and change

 If UserArray2(5) <> "" Then CmdAddUsers.Fields("Password") = UserArray2(5)

to

 If UserArray2(5) <> "" Then CmdAddUsers.Fields("Password") = RC4(UserArray2(5), PasswordEncryptionKey)

that way it should convert your clear text passwords to encrypted while it does the import

this post also addresses this but in the reverse scenario
http://support.cjwsoft.com/code/code_info.asp?TID=261&PN =1&TPN=1

I hope this helps you because I really do have to leave the office like right now. Very late for a dinner meeting.

I should be back on the computer later tonight or tommoro morning

You might just learn something and actually get your project finished before 2010

your over there hacking away on your virus infested WaReZ machine

LOL thanks for the good laugh-- i guess its time to do some reading and making my own mods to the program..

btw i never insulted cafrepress.. not sure where you got that from- just advised that what they have is exactly what i want to have done. How much for your service?

Microsoft VBScript compilation error '800a03f9'

Expected 'Then'

/aspprotect/password_admin/upload_post.asp, line 6

If Session("Admin") <> "True"



If I upload the text file by FTP and then try to import it it only tends to import the first two existing rows.

All collumns match but not sure if I need to add "User_ID". I have added it and created consequecutive numbers.

Any assistance would be appreciated.

Thanks

I did not make a mistake.. what I typed is what I meant to say. I think maybe you are taking it the opposite way as I explained it.

Regardless,

What you want to do... logging them in under https and then having them continue though the site under http is not possible.

It doesn't work that. way. As far as the webserver is concerned https is a totally different site than http and each have their own unique set of application and session variables.

In a sense no different than www.somesite.com is different then somesite.com (each has their own unique set of application and session variables as well).

Now, because of the nature of Forms Based Authentication session varibles created under one will not carry over to the over and thus no password access if you switch over from a secure url to a non secure url.

If you want them logging in under SSL you need to keep them under SSL.

That is not to say there is some ultra complex scenario to mimic the session variables on the non secure side of things (possible with a complex http post to a non secure page from the scure page telling it what variables to create and set), but doing so means a ton of work and also has security concerns of its own.

I am using VS 2005, when i go to new project in visual basic folder asp.net web application is not there..

Can i add it somehow?

Chris,

2Checkout.com has added to their required cart parameters:

https://www.2checkout.com/documentation/newparameters.html

Do you have a version of 2checkout2.asp that will support these?

Thanks,

Nick

Everything is running fine.. I can read ads... reply to them. but when I click sign in or register.. I get a server error.

Any suggestions

Thank You