I have ASPProtect up and running and I was able to log in with little to now problem after following all of the directions. 

I imported my data base of users (approx 5300) into the access db, and now it times out just letting me log in.

I've got full access to the web server to make any changes on that end that I need.

any ideas?

you password protect an asp page in your site "where that is is up to you"

http://support.cjwsoft.com/code/moreinfo171-1.htm

then you link them there from your own pages

thats all there is to it

is that what you are asking?

Additionally...any page you password protect automatically becomes a login page... where you want to start and where you send them after or before login is something you have to handle on your own

Any pages you pasword protect will prompt the user for login info if they are not yet logged in that is.

Then once logged in it returns them to the same page they are showing the page content as it would normally appear.

ok, here is what is going on

you are password protecting an ".asp" page that requires querystring info to run correctly   (example - "somepage.asp?ID=3"")

that is something I never intended anyone to do.. while it does handle and repass the querystring info along during successful login it does not re-pass that info during a failed login as you have found out

this is all by design.. the only reason the system re-passes the querystring info at all is because I wanted to make it smart for the sake of the remember me/cookie feature.. so if someone was using that and bookmarked a page deep in your site with querstring info...then when they went back to that bookmark they would get authenticated and still see the page as intended with the querystring info in tact

it was a nice feature never intended to handle any situations other than what I just described...

now...
notice the url in the browser after failing a login.. then logging in successfully.. it is missing the querystring info

that more than anything is what is going on..  browser caching can cause some confusion when dealing with this because the browser likes to return you to the page minus the querstring info... when that happens a simple browser refresh at that time may very well solve the problem and then you see the page you are supposed to see...

To avoid all of this...

One solution to this is to always start people logging in to an ".asp" page that has no querystring info. That way this won't happen. Once they are logged in you can then offer them links to the pages they need to go to. (you of course still want to password protect those pages)

Another solution is to log them into a page with no querystring info and then do a response.redirect to the page with quersytring info.. thus accomplishing the same thing but without the possibility of the issue because of a failed login.

Another solutions is to do checks in your asp page for missing querstring info.. and if it isn't there do something about it like send them somewhere else.. or display a message about there being an error... etc etc

So,basically you don't want to tell people to login into such and such page with querstring info... and providing a username and password..... You can do it but like you found out it can cause an error if they mess up logging in the 1st time. The system just was not designed to handle that. There are complex reasons for that involving security that would just take me too long to explain.

I hope this makes some sense to you.. it is very hard to try and explain

How can I make so it goes to certain webpages if user enters valid username and password??

I suppose user enters its information on check_user_inc.asp page, and username and password are stored on SQL database.

Thanks

yes, like macnap says.... you have to protect your ".asp" pages the way the directions tell you to...

and like in the "example" protected pages we provide

or they will not be protected and nothing will happen as far as ASPProtect goes

I guess I just didnt understand what you were talking about

The count is in the album area where the small pictures and description of album.   Viewed 1 time(s)  This count never changes.

Thanks

 John

5 Computers in an office, random hardware and operating systems.  Some wireless some wired - all the same ISP connection.

Some users do not see the PLACE A NEW AD hyperlink.  How can this be hidden?  There is no conditional statement yet some see it and others don't.

To make this problem even more confusing if I take an image and put the place_new_ad.asp hyperlink on that image the users don't even see that image any longer.

How can this be resolved?

if that account isnt there thats normal because if it doesn't have any permissions for that folder so it wouldnt be listed

you simply dig into the menus a liitle deaper and find it then add it.

you dont want to use the virtual smtp virtual server method... you want to use a real remote email server with valid MX records..

ultimately though after all that is going is it is out of the hands of the asp code and it becomes issues other then the code sending the email... regarding to whether or not emails get blocked by certain organizations

For example:
I have many aol users sign up for various systems I have running without issue. I use CDOSYS with my own server mail.cjwsoft.com which has proper MX records set up.

I would also try to determine the difference between blocking and spam/junk email filtering. It is impoirtant to truly know what is going on.
Sometimes adding more information to the body of the emails going out will eliminate the junk mail filters from gettings the emails.

Then you have the various open relay lists that places like AOL use. If your email server or IP sending the email is on those lists for spamming you do not stand a chance. That is all out of the hands of the ASP code.

Hello,

If you see that when doing a view source then that code is not running.

I will need to go into your site and look as something is very wrong on a low level and I have no more ideas.

PM or email me the info and I will figure out what is going on.

I'll need ftp or frontpage access to the site.
I'll also need to know the urls for the asprotect system as well as the page you are trying to protect.

CJW

If you still cant see the upload buttons after checking the settings send me a PM with the info and I will take a look at your installation. It will have to be up on a live server of course.

I am testing this now and there is something wrong.

PayPal is hitting the ipn.asp but the database is not being updated.

I will figure it out shortly though and post the anwer here.

Okay Chris, I wold like to get rid of the encryption then if it's not too much trouble.

I have no option of running the production server against an ms access db, since the db needs to be online and accessible from another system.

1st off.. you appear to have some strange things going on with that domain. Looks like you have a frameset and are loading another domain in it which is always confuding especially if you are running the site off your home computer or something... I am not sure

That aside..

If I go to

http://www.bones.myftpsite.net/rfamilystuff/default.asp

and click on the "familiy" category

then right click on a broken image.. look at properties

Your linking the image to your localhost

see

http://localhost/rfamilystuff/pictures/Pic_3_1_thumb.jpg

and that is wrong, just like I said above

Nobody running the site off any computer but your development machine is going to see those pictures because the url isnt valid for them

My guess is in the settings you have the "PictureURL" set to

http://localhost/rfamilystuff/pictures

when it should be

http://www.bones.myftpsite.net/rfamilystuff/pictures


Good luck with this.. I am going to the bar.
If you need more help I probably will not be available until Monday.

When did you download the ASPProtect Version 7 zip file ?

what did you enter as a wrong password to make that happen ?

does it it do it when other wrong passwords are entered ?

Most likely it is no longer supported on the web server. The web host probably moved you site to a windows 2003 server which does not support cdonts or they stopped running the IIS SMTP server.

You usualy wont get an error..

it is also possible that cdonts is boned up as it is pretty flaky and that tends to happen. For example sometimes the emails it is suppost to send get caught up in the smtp pickup directory and never get sent out until the server is rebooted.

You should really ask the hosting company why cdonts has stopped working. It definetly has nothing to do with the code if it has been working all that time.  If CDONTS still is supportd tell them you emails are in limbo. Ask them to look and see if a bunch of ".eml" files are stuck in the stmp pickup directly and if so to please reboot the server.

lastly:
cdonts has been deprecated and now everyone uses cdosys.
see my article
http://www.powerasp.com/content/new/sending_email_cdosys.asp

Our login works great, variables even help determine menu options.  When user logs on, however, it opens in a new page.  Is there a setting somewhere that sets whether you can open in a new or existing page?

Also, when you log off

If things are not perfect there will be no log files and no errors.. it can only be one of these things really
http://support.cjwsoft.com/code/moreinfo313-2.htm

You may also want to make your the filesystem on the server is working and not disabled by norton script blocking or anything random like that. Testing the filesystem object is best done by writing a simple text file to a folder. Plenty of examples of doing that can be found at www.aspin.com

Recent activity is temporary and admin activity in the admin area is not tracked. If your application in IIS has reset or there has been no activity in the users area or in pages you protected there will be nothing there. The busier your site the more chance something will be there. For example usually our online demo has something there except right after 4am when my server does an iisreset.

I dont know about your error on line 6 when uploading..

as far as the manaully edited import file not working I would really need to see it. There has to be somethin wrong with it's format.

I really need more information and possibly acess to the system to do some troubleshooting...

This is anot a feature anyone has ever had an issue like this with.

I think you may be using old code where that was an issue... I am going to PM you the latest version..

to be safe upgrade all the ASP files except the dataconn_inc.asp files and your config_inc.asp files

"be real careful not to lose your current encryption keys in the "config_inc.asp" file or you will be in real trouble

You can use your existing database

Glad it worked

Just wanted to say how much I like the program! I hunted for days and finally purchased a Perl based product. After several days of goofing with it I gave up. ASPPhoto worked right on first install!!!!

Way to go!

Weird

I was actually able to do similar thing by allowing our dedicated search engine to access the site unchallanged.

<%
If Trim(Left(Request.ServerVariables("HTTP_USER_AGENT"),11)) = "MYPASSWORD" Then  
 SearchFlag = True
End If
 
If SearchFlag <> True Then
If Session("Access_Level") > CHECKFOR or Session("Access_Level") = "" Then 
%>
<!--#include virtual="/Auth/check_user_Code.asp" -->
<head>
<title>My Title</title>

</head>

<body>

My Protected stuff here

</body>

</html>

For this to work, the search engine must pass the PW to the web site. I just was not sure how to do the same thing with IPs. I will play with the code and see what happens. If it works, I will post it here to help others, if this is OK with forum rules.

Thanks,

Mo

[/QUOTE]

I just added couple of lines and it works fine

If (Request.ServerVariables("REMOTE_ADDR")) = "xxx.xx.xxx.xxx" Then 
 ' Session("PasswordAccess") = "Yes"
 SearchFlag = true
End If

The way the application ships there are no password confirmation areas anywhere ? Please be more specific as to what you have done and if any mods are involved ?

If you are talking about one of the MODS please realize they are not supported. http://support.cjwsoft.com/code/moreinfo459-1.htm

Even though they are not supported I look them over pretty closely and I know of no issue like you mentioned so I would suggest re-downloading the MOD. Perhaps you got a corrupt download or file.

On second thought guys, it would must easier to change the code using modulus as follows:

<% If PicIndex mod 6 = 0 THEN %> 
      </tr>    
      <tr>
<% End If %>

This will end each row and create a new row after each 6th picture. It'll be must easier code to work with and change.  This code must be placed in the PicIndex For Loop.

If you have any questions, JPortnoy@Checkernet.com

ok.. so we got an NT server with a 486 with 256 meg of ram. 

hehe  sorry

anyway.. I have the system running without doing any importing and WOW is it chugging.. I mean it takes a while even to edit/save a user

good news is the filesystem object works as I wrote to a text file

this may end up being a simple case of lack of horsepower..

we may need to do the importing on a faster system and then take the database over cause everthing I see on your server looks correct

even so aspprotect is running so slow.. I have never seen it chug like this

I even tried connecting to a 2000 version of the database and no difference.

I am not totally sure what is going on but the server resources available are scaring me... however this could be something new in the code that I never got a chance to try on NT server.. I dont think so though

how does your other stuff run ?

static pages that do not access a database seem to serve up quickly.

are you running any other dynamic code ?

Hi

I've tried almost anything here... I'm using an online SQL SERVER database with ASPProtect 7, and I can't login after my initial creation of the admin account.

It works fine with Access... I believe I have checked all the fields created by the sql statement (which was run with no errors),

What could be the problem here? could it be a problem that I run my local IIS against the online sql server?

sincerely,

Morten

Our home page is not showing up gives this error:

Active Server Pages error 'ASP 0126'

Include file not found

/Default.asp, line 246

The include file 'elib/articles/home_feature1.asp' was not found.