There is no way I'm going to spend hundreds of dollars for a thumbnail creation program. Mine is a family web site and all out of my pocket.

Is there any free products that work with Gallery that will create the thumbnails? If not can I create them on my own and link them to the pics? There are tons of Perl based freebies out there.

Steve

If you are using version 6 CDOSYS is not supported. That is one reason why version 7 came out. If you want to rewrite the code to work with CDOSYS in version 6 that is something you need to sort out on your own as I do not support custimization to the code.

you have to check the session variables for groups a little differently.. info on that is here

http://support.cjwsoft.com/code/moreinfo198-1.htm

it is not uncommon for folder permissions to be lost or changed on a server.. a lot of things can cause it

if it was working and now you can not edit or write new data to the database it is most likely permissions

I would triple check permissions... see my articles if there is any doubt on how permissions are set

http://support.cjwsoft.com/code/moreinfo136-1.htm

http://support.cjwsoft.com/code/moreinfo56-1.htm

My hosting company uses ASPEMAIL - and I am trying to setup the mailing settings on ASPPROTECT - but cant seem to get it to work.   I've tried many different options - here are two that are the closest - but have issues:

1. If I use the settings:

email component: aspemail

Mail remote server: my internal server name

*no smtp authentication

email mail notification - my email address on my internal server

***I get the following results:

       I can get get notified when a new user logs in, email a user from aspprotect user screen if they are in my company and have a valid email -- but I can not send to the outside world - I get an relay prohibited error.

2. If i try to change the setting to use the Hosting Website email server - I get the following results:  I dont get notified when a new user registers, I cant send to internal company people - but I can send to the outside world.

**any suggestions on what to do? I'm trying to work with the people who manage the mail servers - but since I dont know anything about them - its a bit difficult.

here ya go

http://support.cjwsoft.com/code/moreinfo169-1.htm

Still not ready... I have no time to finsih it at the moment..

release date is unknown...

Access Database Password

By default all of the Access Databases we give out have a default password of "temp"

The Default username that and Access database uses is "Admin" but you should not be concerned with that except in your connection strings.

The default password for the Access Database can only be changed using Microsoft Access to do so. If you have security concerns it would make sense to change the password. The help system built into Microsoft Access best explains how to do that.

Chris,

I understand.  I set it to a lower number that will hopefully be a good balance for the user.  I am simply AMAZED at what your software does and I thank you for all you have done.

Jess

Just to let you know that i figured out my problem. I had to modify the connection in the email code and get the correct path from my provider.

I hope you enjoyed your vacation.

Thank you
Adam

Please Note : ASPProtect v7.x has a new feature called groups that is much more powerful than access levels. Access Levels were left in the product primarily for existing customers that upgrade to the new version so they do not need to make a lot of changes to their site if they were using Access Levels.


More On Access Levels

Again, Examples of managing Access Levels are provided in the "multiple_access_levels" folder included in the root of the Password System. Look at the source code of the ASP pages in that folder with a text editor to see the working code.

Access Levels and how they work can be re-coded to work in many different ways. However, you have to be a good ASP developer to make changes to it. Here is some information on how they work by default.

In the "check_user_inc.asp" that comes in the root of this system Access Levels work as follows.

Level 1 has Access to - Level 1
Level 2 has Access to - Level 1,2
Level 3 has Access to - Level 1,2,3
Level 4 has Access to - Level 1,2,3,4
Level 5 has Access to - Level 1,2,3,4,5
Level 6 has Access to - Level 1,2,3,4,5,6
Level 7 has Access to - Level 1,2,3,4,5,6,7
Level 8 has Access to - Level 1,2,3,4,5,6,7,8
ADMIN has Access to - Level 1,2,3,4,5,6,7,8,ADMIN

Here is some additional info..

If the access levels are too restrictive you can ignore them all together and create your own totally custom solutions.
Here is a quick rundown of some of the things you can do.

Ok... so if you want to be really specific about what each user can see and
can't .. here's an example of what you can do

Don't use the access levels before the include file..
Don't worry about what you set a user to in the admin area since the access levels won't be used.

Do something like this..

Every time a user logs in session variables are set that you can access at
any time.. thus allowing you to know who they are.

So you could do something like this...


<%@ LANGUAGE="VBSCRIPT" %>

<!--#INCLUDE FILE="check_user_inc.asp"-->

<%
If Session("USERNAME") = "bob1267" or Session("USERNAME") = "carl45" or Session("ADMIN") = "True" Then
Session("PASSWORDACCESS") = "Yes"
Else
Session("PASSWORDACCESS") = "No"
Response.Redirect(Request.ServerVariables("script_name"))
End If
%>

The following URL explains what Redirects are.
http://www.powerasp.com/content/code-snippets/redirects.asp

That would in effect create totally custom access levels.. but you would
have to do it manually for each user.

You can also do things like this after a person logs in

Show custom html to any specific user based on either their username or
access level ... like so

say there was a menu and a certain link should only show up to username
"paully67"

you could do something like this


<HTML>
<HEAD>
<TITLE></TITLE>
</HEAD>
<BODY>


<br>
<a href="main.asp">Home Page</a>
<%
If Session("USERNAME") = "paully67" Then
%>
<br>
<a href="paullys_page.asp">Pauls Stats Page</a>
<%
End If
%>
<br>
<a href="links.asp">Links Page</a>

</BODY>
</HTML>

Or you can show custom HTML or links based on Access Levels or any other info.

You can do just about anything with if-then statements and
using the built in vbscript functions..

Hopefully this info will help to give you some ideas...

Bottom line is you have to do some work within your site to make the Access Level system really come alive.

I am trying to find out where I can enter the ttle for the application.

There is a variableor field called App_Name into which it would be good to insert a generic name. Can this be edited?

I have searched high and low but cannot find anything to do with it.

Hi,

How do you know permissions are ok in that folder ?
Please tell me more on how they were set.

Please read through my article on how they are set correctly.
http://support.cjwsoft.com/code/moreinfo136-1.htm

Often times they are not set correctly or people thingk they set them somehow but in fact did not do it the correct way.

I would also suggest using the "test_physical_path.asp" page in the "extras" folder to verify if the path you are using to the database mdb file is in fact correct. That page should work whether permissions are set or not. At least then you will know if the path is correct or not and you can go from there.

FYI:

The articles you references were read over by me like 3 hours ago... way passed that and prob. in deeper sh*t than i was since im trying everything possible without knowing the true reason this is not working.

Upgrade from V6 to v7.x with an MSSQL SERVER DATABASE

1st of all, backup your existing ASPProtect files and database before performing this upgrade. Please be really careful while performing this upgrade. Version 7.x  is a highly advanced application compared to any previous versions. CJWSoft under no circumstances is responsible if you lose information or have website downtime.

BOTTOM LINE: (PERFORM THIS UPGRADE AT YOUR OWN RISK)

To do this upgrade you're going to need to have SQL Enterprise Manager and SQL Query Analyzer

That being said, on with the upgrade..

Open your SQL database in SQL Enterprise Manager

Regarding the following Tables

Rename "Users" to "ASPP_Users"
Rename "Groups" to "ASPP_Groups"

If you do not have a "Groups" table do not worry about it right now.

Now right click and DELETE the Config Table.
Yes, delete it..

Now, go into Design View for the "ASPP_Users" Table.

Rename the "Password" field to "Old_Password"
Be sure to spell it perfectly using the Underscore

If you have a "Groups" Field... leave it alone
If you do not have a "Groups" Field add one and make it a "nvarchar" field with a lengh of 255.

Now, we are going to add a few more new fields.

Add a field called "Redirection_URL" make it a "nvarchar" field with a lengh of 150.
Add a field called "PayPal_Subscriber_ID" make it a "nvarchar" field with a lengh of 100.
Add a field called "Newsletter" and make it a "bit" field
Add a field called "Password" and make it a "nvarchar" field with a lengh of 100.

Now close that window and save the changes..

Download these scripts.
2005-02-23_171110_aspprotect_v7_sql_upgrade_scripts.zip

Now open up SQL Query Analyzer
Connect to your SQL server.

Then load the script  "aspprotect_v7_config_table.sql" into the Query Analyzer.  Click the green play button at the top. If everything goes well the response should read something like this.

******************************************************
(1 row(s) affected)
******************************************************

Now, if you had a Groups Table your done with the database changes.

If you didnt have a groups table.

Then load the script  "aspprotect_v7_groups_table.sql" into the Query Analyzer.  Click the green play button at the top.

Now, go back to your database in Enterprise Manager and make sure all 3 tables are there and look ok. You might need to do a refresh or two to see them.

Now make sure an existing or new SQL user has (public / datareader / datawriter) permissions for all three tables. You reference this user in the asp code connection string so this user must be set up correctly. You may need your SQL server admins or hosting company to help you on this step as you may not have access to do this. You may not need to create a user and set permissions as the sql user you were logged in as to use query analyzer may by default get the correct permissions on anything you create.

Regardless, as you can see from this screenshot I have a SQL user called "aspprotectuser" and proceeded to set the permissions for that user. Under database access giving him (public,datareader, and datewriter permissions).


Now, you are done upgrading your SQL Server Database.

The existing passwords still have to be encrytped and moved from the "Old_Password" to the "Password" field

To that we have a special page we run in the application that will take care of that.

So, for now... go install the application, but using the database we just created.
Follow these instructions for the most part...
http://support.cjwsoft.com/forum/forum_posts.asp?TID=181& ; ;PN=1

When you get to the part where you finally get into the admin area and need to make an admin account you will notice that your existing user database is there but none of the users have passwords if you look at them in the edit screen.

That is normal. Simply do what the instructions say and create and admin account using a username that does not exist..

Then log off... then back in as that new admin account. If that works you are ready to convert the passwords.

This part is very easy.

You want to run a special page via the browser.

http://www.mysite.com/password_admin/convert_to_encrypted.asp

Replacing the part in blue with your website info.

Once you get the page running you will see a login prompt and one form field just like before with the "get_me_in.asp" page

You will need to paste the "PasswordEncryptionKey" value that you used in the "config_inc.asp" file in the form field and hit enter.

If all goes well you will see a page telling you to click here to encrypt the passwords and copy them over.

So do what it says... dont click more than once and wait.

Eventually it should say it is finished. So go log in to the admin area of the system using the new admin account.

Now edit some users but dont save... you want to see if the passwords are showing up. If they are the conversion worked. If you see nothing or a garbled mess it did not work and you made a mistake during this whole process.

If things went well backup and delete the conversion file below.

http://www.mysite.com/password_admin/convert_to_encrypted.asp

You do not need it anymore.

Once you are positive every thing is running smoothly and everyone's passwords are ok you can go in and delete the "Old_Password" field as well.



If things didnt go well.. try again from scratch and go slowly.
If they still dont go well get ahold of us for help.

We are here to help, but if you really want us to we can be hired to do the conversion.

[QUOTE=cwilliams]actually, passwords can be up to 75 characters long in ASPProtect.
the only requirement when entered from a non admin user is that they are at least 4 characters long.

what does MSAccess have to do with this ? Are you trying to convert and old system or something? I noticed you created and "old password" field in there ? Is there something I do not know about as far as what you are trying to do?

Passwords in version 7 are encrypted so I hope you understand all of that and realize you can not enter or change passwords right from SQL server. Also if you import info you must handle that accordingly and convert the passwords to encrypted format. [/QUOTE]

First off, I haven't imported anything from MS Access.. The only reason I mentioned it is cuz I thought initially it worked with Access and not SQL server.

I am not converting nor entering any data manually into the db, nor have I changed anything in the way the registration is made (don't know where the "Old password" has come from? thought it was a function you made?)

Things have now changed I found out godaddy has persitis aspUPload and aspjpeg as value added products, I have the aspjpeg working but have been unable to upload when using aspUPload, everything works fine with the vbscript method so I think my permissions are correct. Whenever you get a chance, any help would be appreciated.

Thanks

Mark

Good Morning, any suggestions on how to best "fake out the system" -- I would like to try to keep this clean so I can see the real errors?

My thought was to try to just move those .gif files to the directory that it thinks it should be in -- do you have any better suggestions? Or reasons why I really wouldnt want to do that?

It really means just what it says. Your connection string is just not valid and the sql server speicifed can not be reached. The username and password could also be invalid. Since you already had a database set up you should use the same username and password you have always been using. You also need to use the same database name you have always been using. Without actually knowing more and seeing what you are doing it is pretty hard to tell you anymore than that.

The directions and sql scripts given are for setting up a new sql database. Applying them to an existing sql database requires a slightly different approach. Modificiations to the SQL scripts elimintating references to the usernames/password/database we suggest in the scripts is also a good idea.

A data connection is a low level as it gets. Until you get that working you are really not even touching any of the code in the ASPListings application.

If you want I have no problem going into your sql server and web and setting up for you correctly.

My hosting company uses ASPEMAIL - and I am trying to setup the mailing settings on ASPPROTECT - but cant seem to get it to work.   I've tried many different options - here are two that are the closest - but have issues:

1. If I use the settings:

email component: aspemail

Mail remote server: my internal server name

*no smtp authentication

email mail notification - my email address on my internal server

***I get the following results:

       I can get get notified when a new user logs in, email a user from aspprotect user screen if they are in my company and have a valid email -- but I can not send to the outside world - I get an relay prohibited error.

2. If i try to change the setting to use the Hosting Website email server - I get the following results:  I dont get notified when a new user registers, I cant send to internal company people - but I can send to the outside world.

**any suggestions on what to do? I'm trying to work with the people who manage the mail servers - but since I dont know anything about them - its a bit difficult.

[/QUOTE]

The relay error is because when you send emails outside your email domain smtp authentication is required.

I suggest trying to use CDOSYS with the smtp authentication option. CDOSYS is on all servers by default and is really the way to go. Use a real email account and password to send the emails through the server.  Be sure to check smtp authentication for cdosys and to specify all that info for your email account and password in the settings screen.

If you want to know about CDOSYS read my article.
http://www.powerasp.com/content/new/sending_email_cdosys.asp

If you still cant see the upload buttons after checking the settings send me a PM with the info and I will take a look at your installation. It will have to be up on a live server of course.

Hope the wedding went well.  I have one this weekend.

I was successful at performing an upload.  The free upload software was either not configure properly (probably) or not working.  I downloaded the trial version of softartisan's upload (which is like over $300) and it started working. 

Can more than one photo be uploaded at one time (like a whole folder full of photos) or does each have to be done individually?

Session.LCID = 2057

More Info in Case Anyone is Interested:

This bug was mentioned by a couple people. The cause of it was never really understood until I recently re-wrote some of the banner code for an upcoming version.

The fix for this bug was very simple. It was just one of those weird situations where code should have worked but did not. I added some code to do it a bit differently and it worked as it should have..

It really still makes no sense to me why it didnt work the way it was, but at least there is a fix.

Is there an easy way to make this work with reoccurring a monthly or yearly subscription?

I am using VS 2005, when i go to new project in visual basic folder asp.net web application is not there..

Can i add it somehow?

New Version 8.1 Released

Whats new..
http://www.aspbanner.com/v8_notes.asp

Upgrade Instructions...

Upgrade at your own risk. Though we try new versions are not always perfect due to minor bugs we may miss.

Back up your old setup so you can revert back if necessary..!!!
Save your data connection string info in a text file so you have it.
You can get that by viewing the system info page in the admin area.

Carefully copy all the ".asp" files from the new version to the old.
Your going to want all the .asp files in the aspbanner folder.
Your going to want all the .asp files in the aspbanner/scripts folder

Copy the aspbanner/images folder because there are some new images

Be sure to also copy the "data/config" folder files.folders as well as a lot of that is new including the actual config file. If you dont get the new config file copied in there you will have problems later on with some of the new features.

Be sure to create a new folder in the "data" folder called "tempstats"
Make sure it has proper permissions if you plan on using the delayed stats feature as the stats gets temporarily stored there. 

Go back to the area where you originally setup the data connection and do that again...

From the web browser run the following URL

http://yoursite/data/config/aspbanner_unlimited.asp

Replace "yoursite" with the proper url info relevant to your web site location.

When run via the web server that page will ask for a password. By default it is "temp". You should change it later on for security reasons. That page tells you how.

Now... moving on..

There were no changes to the database except for SQL Server users so you can use your existing database.

SQL Server users that want to use the new stored procedures feature (it's optional) will need to update their SQL database with the stored procedures.

Scripts to do that are provided.


ALSO: I have been running this new version using SQL Server Stored Procedure mode for a 1 week on a special banner server that serves banners to many of my own sites. I have also been using the new Delayed Stats feature.

All I can say is it is running like a champ and the SQL server is using less memory than it ever did before.