I did try to redit the banner and the old link was there, not the new one.  In addition I tried to ad a new banner to an account but it too was not saved.

Since I can see the banners from the aspbanner solution, does that not tell me that the solution is properly connected to the database?  The only thing is the solution only appears to be able to read the data and not write or delete it.

The settings for the directory are read write execute and delete so I am not sure what I need to do to get it working again

really all depends on the sql connection string you are using and the names of your sql user you are using...

you really havent described very much..

I'd double check all of it.. something is wrong

how di I change the currency dollar sign to gdp pound sign ?

I need all my tranactions in gdp puund sterling to use on paypal

regards

simon

No problem. I get it now.

I added a Session Variable for "Counter". Then wrote an If statement around that. When the user logs on for the first time they see a window pop, after that the normal start page.

Thanks

How do I recover or reset admin password used for the aspprotected pages. I have installed it months and months ago, but now can not recall the password. Any help appreciated, as I do not feel like installing it again.

Umm, if your using MSACCESS your using MSACCESS

SQL server has nothing to do with it.

I'll give it a shot loading it on the laptop and publishing it, if it doesn't work I'll let you know and you can take a look at it tomorrow afternoon.  Thanks for all the help tonight...

Good luck pouring that concrete!

Tell tell me some info about your install?

How am I supposed to know what is going on when you are not showing me what you have in your web config file and also the directory structure of the install or what you are putting in a page you are trying to protect ? It almost sounds like you are not editing the paths correctly in the various places.  I mean yes you told me something about the "map" folder but what I saying is tell me more detail.

BTW: this is a very important setting in the web.config file and must be edited accordingly so the path is right.

<forms name=".aspprotect~net" loginUrl="/aspprotectlogin.aspx" protection="All" timeout="60" path="/" />

Basically your showing me random errors and posts left and right and I honestly have no idea what your doing ?

Ulitmately though I am trying to help you in this situation like the web site says.

We offer tech support for installation of the base application purchased in it's native form. In some cases in order to receive proper tech support your application will be need to be installed on a live server on the Internet. We simply cannot troubleshoot all issues when the application is only installed on your local machine.

Meaning I am not going to keep this up if you keep asking question after question after question regardign your local XP Pro installation. There is only so much I can assume or guess when you are running this on a local development server. I know you got all sorts of problems getting a decent live server to run this on but that just isn't my problem. Get this up and running on a professionaly and correctly setup live server and when these random configuration errors pop up atl least I can go run the pages and look at them. Right now I am just confused by nearly everything you have posted today. Half of looks like basic ASP.NET path issues that you need to sort of on your own based on where you installed the application on the machine and what you have in the web.config file.. etc etc etc

It is sounding more and more like ASP.NET is way over your head. If you want a copy of the classic ASP version of ASPProtect you are welcome to it. I think you will be a lotter better off sticking to classic ASP unless you really start reading up on ASP.NET and learning more about how forms based authentication and the web.config file work.

If you can would you do it for a price as a mod or will this be added to the new version.

People who have the option pack have a new feature called groups.

Groups are meant as a replacement for using the access levels as they are much more powerful. Support for pages protected using access levels is left in tact for backward compatiability for a customers older protection code.

A customer recently told me groups could not be used like access levels and that 8 access levels was not enough. This is how I explained that groups can do everything access levels can do.



Groups can honestly do everything access levels can do if you really think about it.
Using groups and protecting pages accordingly you could actually create a system that basically worked identically to the way the access levels works.

For example..

You make 8 groups and assign users to them accordingly

Protection code on page allows access to groups 1-8
The aspprotect system generates this code for you…

<% GROUPACCESS = "1,2,3,4,5,6,7,8" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

In this case a user assigned to any one of those groups would have access..

Protection code on page allows access to groups 2-8
The aspprotect system generates this code for you…

<% GROUPACCESS = "2,3,4,5,6,7,8" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

In this case a user assigned to any group between  2-8 would have access..

Protection code on page allows access to groups 3-8
The aspprotect system generates this code for you…

<% GROUPACCESS = "3,4,5,6,7,8" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

In this case a user assigned to any group between  3-8 would have access..

let's try this... edit that page with a text editor like notepad...

Carefully replace any instance of "Cint" with "CDbl".. I may have missed some of those when testing the last time I edited the code.

Hi,

I don't fully understand what you are explaining ... the part about showing a user but not working???? but if you PM me the details I will glady go into your live webserver and see if I can get it working.

OK.  If no return page is set, do they end up on a PayPal confirmation page and have to navigate back to my site by going Back or typing the web address?

Nick

Ya, you must have tried to upgrade from a really really old version like you said which wouldnt really work out because those instructions are specifically for upgrading a version 6 database to version 7.

That line error you had was looking for the User_ID field and I bet the version you had was so old that you didnt have a field named that as a few years ago the field "ID" got renamed to "User_ID"

As for all the cool stuff... yup there is a lot of cool stuff in this version... glad ya like it so far

Encountered another issue.  When entering a user name correct but the wrong password get the following error:

Microsoft OLE DB Provider for ODBC Drivers error '80040e14'

[Microsoft][ODBC Microsoft Access Driver] Syntax error in string in query expression '(Username = 'ROBERT') AND (Password = 'Z£$'.

/check_user_inc.asp, line 115

Did I do something else wrong?!

Thanks

Or at least I think so.  I have been trying to get this software to work so I can see if it meets our needs for an upgrade purchare. Here is my error.

Microsoft JET Database Engine error '80040e10'

No value given for one or more required parameters.

/aspprotect/scripts/populate_config_variables_inc.asp, line 15

My provider says that the problem is NOT on there end, that it is a problem with the code.  I think that it is a database connection problem.  Can you please help.  Below is my connection string based on what the setup page directed me to do:

ConnectionString = "data source=\\NAWINFS03\home\users\web\b1347\rh.957theride\asppro tect\data\database\ASPProtect_access2002.mdb; Provider=Microsoft.Jet.OLEDB.4.0;Jet OLEDB:Database Password=temp"

When I first set up the program I got this error:

Provider error '8000ffff'
Catastrophic failure
/aspprotect/scripts/populate_config_variables_inc.asp, line 11

Once again, the looked into it and said the permissions were fine and that the code was most likely bad.  But then the errror changed to the one that I first listed.  Which is the one I am currently getting. 

BTW here is the page address

http://www.957theride.com/aspprotect/password_admin/get_me_i n.asp

Thank you!

Thank you so so much! I went to the admin area and changed the email component from CDOSYS (using remote server) to CDOSYS (using port 25 forwarding) and all is working great now!

Again, thanks!

Hi there,

Well, that is why we added the PayPal subscription pack where all of that is taken care of and customers get put under a recurring billing cycle.
The more people you get to pay that way the less you have to do.

We also have routines for the two other supported payment methods so people can look up their account and add time to it whether it is active/expired or not.

Other than that, yes it is something you need to sort out on your own based on how you want to run your system. You have the source code and the sky is the limit on how you want handle all of that.  You send out an email to users about to expire. Whether they come back to the site/look up their account and add more time to it is up to them. I really just do not see any way ASPProtect could handle that whole process automatically.

As for batch changing to users in the database. We give you the source code and we also use an open database structure. You can run any query you want on the database whether with ASP code or directly in your database using the tools that come with it, You can write any code you like to do whatever you like to the database. You can even tie other systems and code into the database via OBDC and manipulate data. The sky is the limit like I said. I also don't really see how batch changes to the database relates to individual users paying again for access or not especially since we include payment  pages were a users can look up their accounts and pay for and add more time to it automatically ? At least not regarding the payment routine we provide support for.

ASPProtect can not handle everything every person would need to do. It is meant as a solid starting point for any project, but there are going to be times when more functionality will need to be added by the customer based on their specific needs.

This isn't going to help you much but here is the deal.

The 2checkout support in ASPProtect actually is not supposed to work with 2checkout subscriptions and therefore does not need to use an item number.

It is intended to be used for single payments only with 2checkout as explained in this thread.
http://support.cjwsoft.com/code/moreinfo212-1.htm

Single payments with 2checkout use their shopping cart which allows for dynamic payments without needing an item number.

I agree with you that 2checkout's interface is confusing. It's actually about the worst system I have ever seen. I could not make a 2Checkout subscription system because their system is just too limited and I couldn't make it work the way it really needed to.

Upgrade from V6 to v7.x with an MSACCESS DATABASE

1st of all, backup your existing ASPProtect files and database before performing this upgrade. Please be really careful while performing this upgrade. Version 7.x  is a highly advanced application compared to any previous versions. CJWSoft under no circumstances is responsible if you lose information or have website downtime.

BOTTOM LINE: (PERFORM THIS UPGRADE AT YOUR OWN RISK)

To do this upgrade you're going to need to have the Microsoft Access Application.
To work with an Access .mdb file it can not be newer than the version of Microsoft Access you are running.

That being said, on with the upgrade..

Open you're existing Acccess Database up in Microsoft Access..
You should see this something like this.



By right clicking on then choosing rename
Rename "Users" to "ASPP_Users"
Rename "Groups" to "ASPP_Groups"

If you do not have a "Groups" table do not worry about it right now.

Now right click and DELETE the Config Table.
Yes, delete it..

You should now see this. (with or without the "Groups" table)



Now, right click on "ASPP_Users" and go into design view.
It should look like this.


Rename the "Password" field to "Old_Password"
Be sure to spell it perfectly using the Underscore
It will look like this.


Now scroll down to the bottom a bit It should look like this.



Now..

If you have a "Groups" Field... leave it alone
If you do not have a "Groups" Field add one and make it a memo field.

Now, we are going to add a few more new fields.

Add a field called "Redirection_URL" make it a "text" field with 150 field size
Add a field called "PayPal_Subscriber_ID" make it a "text" field with 100 field size
Add a field called "Newsletter" and make it a yes/no field
Add a field called "Password" and make it a "text" field with 100 field size

It should now look like this.
(you do not need to worry about the field descriptions.. that part is optional and only seen when working on the database)



Now close that window and save the changes..

Your now going to open up another Access Database while still leaving the one you have on your screen open. You going to open up one of the new databases that came with v7.x. This database has some info we are simply going to copy and paste.

You'll want to open it and put it side by side on your desktop like so.
(the old database is on the left.. the new one is on the right)



Now, for the fun part.

On the new database to the right.. right click on the "ASPP_Config" table and pick "Copy"

Then move your mouse over to the old database on the left. Right click in the open white area and click "paste"

It will ask you for a database name. Type in "ASPP_Config"
Leave "Structure and Data" checked and hit OK

Your old database on the left should now have a nice new "ASPP_Config" table.

OK, now for the "ASPP_Groups" table

If you already have a "ASPP_Groups" table in your old database you are done.

If you do not have one your going to copy and paste the table from the New Database to your old database just like we just did with the "ASPP_config" table.

Your old database should now look like this.



Now, you are done upgrading your database from within Microsoft Access.

The existing passwords still have to be encrytped and moved from the "Old_Password" to the "Password" field

To that we have a special page we run in the application that will take care of that.

So, for now... go install the application, but using the database we just created.
Follow these instructions for the most part...
http://support.cjwsoft.com/forum/forum_posts.asp?TID=181& ; ;PN=1

When you get to the part where you finally get into the admin area and need to make an admin account you will notice that your existing user database is there but none of the users have passwords if you look at them in the edit screen.

That is normal. Simply do what the instructions say and create and admin account using a username that does not exist..

Then log off... then back in as that new admin account. If that works you are ready to convert the passwords.

This part is very easy.

You want to run a special page via the browser.

http://www.mysite.com/password_admin/convert_to_encrypted.asp

Replacing the part in blue with your website info.

Once you get the page running you will see a login prompt and one form field just like before with the "get_me_in.asp" page

You will need to paste the "PasswordEncryptionKey" value that you used in the "config_inc.asp" file in the form field and hit enter.

If all goes well you will see a page telling you to click here to encrypt the passwords and copy them over.

So do what it says... dont click more than once and wait.

Eventually it should say it is finished. So go log in to the admin area of the system using the new admin account.

Now edit some users but dont save... you want to see if the passwords are showing up. If they are the conversion worked. If you see nothing or a garbled mess it did not work and you made a mistake during this whole process.

If things went well backup and delete the conversion file below.

http://www.mysite.com/password_admin/convert_to_encrypted.asp

You do not need it anymore.

Once you are positive every thing is running smoothly and everyone's passwords are ok you can go in and delete the "Old_Password" field as well.



If things didnt go well.. try again from scratch and go slowly.
If they still dont go well get ahold of us for help.

We are here to help, but if you really want us to we can be hired to do the conversion.

thx for posting this..


Just a few notes... more than 100 pictures specified in the config file is not supported. You are of course on your own if you specify more than 100

Also, technically the post above should say more than 102 pictures... "I think" as you wont need more html cell code until then..

The loop in the code is probably how I should have done it in the 1st place but I was in a hurry to get this finished and I also never expected/wanted anyone to specify more than 100 pics per album.

Lastly.. depending on what style you are using in the config file the code above may not work as some of the styles do not use cells but line breaks instead..   At least from what I remember.

Hi,

You see, an include file is no different then a link to an image or graphic. The path to the include file must of course be valid. That file isn't in the same directory as that page so you get an error.

You simply need to make the call to the include file valid.

See my article on server side includes.
http://www.powerasp.com/content/code-snippets/includes.asp

You should also look at some of the provided example pages and see how the paths to the include files are done.

You can also use a virtual include if you figure out the page for that. See my article for the difference between a file include and a virtual include.

The code generator in the admin area shows examples of both but depending on your site structure the paths may need to be slightly edited.

Server Side Includes are a fundamental part of using ASP and they are used a lot. Once you understand how include files are used you will think it is the simplest thing.


More articles on server side includes

http://www.w3schools.com/asp/asp_incfiles.asp

http://www.4guysfromrolla.com/webtech/faq/Beginner/faq6.shtm l

http://www.minwar.com/24

Regarding (ASP Photo Gallery Pro)

If you are looking to import a very, very, large number of images, the upload feature might not be sufficient for you. I have done some work using a unix terminal to be able to upload as many images as I would like by simply placing the images in the directory and renaming the images. There are other ways to rename the images, but I am very familiar with Linux, so I chose to do it this way. If you are running Linux, MacOS, or another Linux-based OS, you can simply pull up a terminal and run the following command in the appropriate directory. If you run Windows, I'd suggest CygWin, which creates a Linuxenvironment (Linux shell). It can be found at www.cygwin.com In order to be recognized by the ASP software, the images must be in the format of pic_"Album Number"_"Picture Number".jpg . Therefore, the following code is run to accomplish the file name change (on one line without wordwrap):

ls -1 DSC* |
sed 's/DSCN//g'
sed 's/.JPG//g' |
awk '{print "mv DSCN"$1".JPG pic_9_"$1".jpg"}'
This command will change all files beginning in "DSCN" to "pic_9_*Picture Number*".

This does have a slight problem however. If there is a large number of pictures, 0's become a problem. For example, if there are 200 pictures, picture 1 will show up as pic_9_001.jpg. This can be fixed by the following command, which will eliminate unneccesary 0's (All on one line once more):

ls -1 --color='never' pic_9_0*
|sed 's/_0/_/g'
|sed 's/pic_9_//g'
|sed 's/.jpg//g'
|awk '{print "mv pic_9_0"$1".JPG pic_9_"$1".JPG"}'

This command eliminates 1 zero. It should be run as many times as needed to eliminate all zero's.

Please Note: These commands will only show the resultant set (The list of picture names). In order to execute them, they must be output to a shell script using the ">" character as follows:

ls -1 DSC* |
sed 's/DSCN//g'
sed 's/.JPG//g' |
awk '{print "mv DSCN"$1".JPG pic_9_"$1".jpg"}' > temp.sh

Then, the shell script must be run using the following command:

sh temp.sh

This might take a few moments, depending on the amount of picture names that are being changed.

IMPORTANT: BACK UP all files before changing file names. Also, view the resultant sets to make sure it's what you want before outputting to a shell script.

If you have any questions, please feel free to post or e-mail me @ JPortnoy@checkernet.com

(User Photo Upload Mod) for ASPProtect Version 7.x

This will allow an individual user to upload a user picture instead of just the admin.

Notes: This is a down and dirty mod. The user upload code was copied from the admin area and there are no safeguards. Meaning there is no limit on the file size a user uploads and there is no confirmation process in case something they upload is inappropriate. etc etc etc

If you want that you will have to work on that on your own.

Directions:
Back up your existing ASPProtect installation.

copy these files into your "users" folder

2006-01-24_111305_User_Upload_Mod.zip

I am still a little confused... one thing I would like to mention is that the passwords in the aspprotect database are encrypted... meaning you cant just add a password to the user database by hand because it wont be the encrypted value and wont work.

It is something the application takes care of when you add a user via the web based interface.

You can however still add users manaully or with careful import/exporting... but you will have to use the existing password conversion technique which is covered at the end of our upgrade instructions in these forums.
http://support.cjwsoft.com/code/moreinfo174-1.htm

Basically you want to add a field to the "ASPP_Users" table called "Old_Password" and that is where you enter the password in plain text. Then after you are finished adding users to the database manually you do this.

You want to run a special page via the browser.

http://www.mysite.com/password_admin/convert_to_encrypted.asp

Which will convert the passwords to the encrypted value for you.
See the bottom of this thread for all the info on that.
http://support.cjwsoft.com/code/moreinfo174-1.htm

Wondering what might be causing a long delay to display the login screen?  This does seem to be intermittent.  Could be server/ISP related? Have experienced enough times to justify posting this question.

I can count up to 20 seconds after clicking on the link.  After login all other selections zip right along without problem.

http://gibsoncity.us/aspbanner/

Thanks, Lance

Humm, I dont see how moving to a new server could have anything to do with that.

What method of displaying the banners are you using. Perhaps try some of the other ones.

Don't use the javascript method with a javascript based ad like google.. that's for sure.

It's just a generic error that means one of 1000 different things is wrong.. there is a lot of information on in in these forums as well as links to articles about it.

http://support.cjwsoft.com/forum/forum_posts.asp?TID=27& PN=1

usually it means permissions to the database folder are incorrect or the physical path you are specifying for your dsn-less connection is invalid..

everything has to be perfect