Advertising ?? oh really.

It was named that because that way if you already have a login.aspx file for whatever reason it does not interfere which is a good thing. It has nothing to do with advertising.

Next off you never mentioned having an issue with it saying aspprotect in it. I am EXTREMELY clear about what I support and do not regarding ASPProtect.NET. If you are upset because I didn't tell you exactly what to edit and change in visual studio.net and hold your hand you are out of line. My god, I sent you to like the best and most detailed tutorial on how to setup and use the application with VS.NET that could ever exist. That took forever to put together. I even responded to your post on Christmas on a Sunday. I doubt too many companies would have responded on Christmas.

More importantly than that when you purchase code from CJWSoft you are purchasing digital source code and there are no refunds. Every single page in the CJWSoft family states that very cleary in the footer. I do not appretiate it when someone threatens a chargeback and as far as I am concerned anyone that does that is commiting a crime of theft. I also do not appretiate smart comments saying it's "obvious" etc etc

If you wanted to strike a nerve with me you did. If you want to commit a crime and be a thief that is your business as well. Obviously I can not stop that and the credit card company will take your side. I work very hard on the source code I sell and my policies on everything are VERY clear.

Advertising ??
Calling the credit card company ??
Obvious ??

nice, real nice

I am using v7 with other software written in ASP.NET. When I include the the "checkfor" and include file, I'm receiving a compliation error.

Here is the include I have on the .aspx file:
<% CHECKFOR = "4" %>
<!--#INCLUDE FILE="../../ASPProtect/check_user_inc.asp"-->

Here is the error:

i downloaded the latest version. i also downloaded the sql script provided and ran in sql query analyser to create the tables.

After that i ran a special page to intially get into the system,

then setup a new user, then make them an admin,

and after that i logged out and again when i try to login iam not able to login.  When i check the ASpp_User table I noticed that the values in the fields "Login_limit" and "Active" in the ASPP_Users table in the SQL changed to NULL and 0. But if the value are Nulls or 0 it means it's not active and it's not allowing me to login.

Pls advice

lmao ... ya that has never happend to me before....

See, and that's what I thought.  What's interesting is that if I call either an aspx page or an asp page in the iframe tag, it asks me if I want to open the page, it doesn't display it.  I'm using IE6 so there's not problem with the support for the tag.

I'll keep looking to find out what's going on. I think the iframe method might work best.

JDooley

I checked the option pack code as well and it looks correct.
I tested it and it acted as it should.

You can see it in active at the live demo
http://www.aspprotect.com/demo3/demo.asp

admin
test

go the the admin area.. you will notice 3 users with level 4 access
1 of them is inactive

then go to the mass email area and pick   active and level 4
it will say it is sending email to 2 users which is correct

then go to mass email again and pick level 4 and inactive
it will say it is sending email to 1 user which is correct

choose any status and access level 4 and it will send email to 3 users which is correct

When you do this please realize you can not choose a group as well.
That will cause a problem because you can not choose a group and an access level at the same time.


Anyway... perhaps you can private message or use the contact us form and and let me take a look at your system. Since I can't reproduce the behavior that is the only way we might figure this out.

[QUOTE=cwilliams]
Is that a real term or just something you named it cause they have like a zillion people using that SQL server?[/QUOTE]

yeah thats it, you buy into a part of the sql server so it's an sql server hotel...

Thanks Chris.

Your solution worked!

I checked through the code and could not find anything as well. 

However, I do think it may be related somehow to the code as I get the messages popping up in the error log only after I have edited a banner.

If there is nothing obvious, I may just set my error log to filter and automatically delete this type of error.  Not something I prefer to do.

Thanks for the quick response.

Otherwise the program is working very well and I'm happy with it.

After taking another look at this and trying your suggestions without success, it appears that in Windows 2003 server it is nearly impossible to remove the READ ONLY attribute from the _database folder.  I'm wonder if this could the cause?

Thanks 

Probably not... javascript calling complex javascript is not a good thing and is often a problem.

I would try one of the other methods such as the xml parser if possible.

I'm trying to use CDOSYS.

It seems to work fine on the web page, however the mail never gets
delivered.

I can see my messages sitting in c:\inetpub\mailroot\pickup but they never leave it.

I found another folder after doing a search for "pickup".... it is:
d:\program files\Exchsrvr\Mailroot\vsi 1\PickUp     If I paste the files
into there, they get delivered.

How can I get the email to be delivered without doing the cut and paste?

I've tried it both with and without authorization.

I am running a Windows 2000 server with Exchange 2000.

Thanks.

no, that system only works with ASP.NET code.

Currently it can not possibly work with classic asp.
PayPal made it a nightmare to use and work with.

Special things regarding the signing of digital certificates also need to be installed on the web server so if it isn't your server your also out of luck.

Or at least I think so.  I have been trying to get this software to work so I can see if it meets our needs for an upgrade purchare. Here is my error.

Microsoft JET Database Engine error '80040e10'

No value given for one or more required parameters.

/aspprotect/scripts/populate_config_variables_inc.asp, line 15

My provider says that the problem is NOT on there end, that it is a problem with the code.  I think that it is a database connection problem.  Can you please help.  Below is my connection string based on what the setup page directed me to do:

ConnectionString = "data source=\\NAWINFS03\home\users\web\b1347\rh.957theride\asppro tect\data\database\ASPProtect_access2002.mdb; Provider=Microsoft.Jet.OLEDB.4.0;Jet OLEDB:Database Password=temp"

When I first set up the program I got this error:

Provider error '8000ffff'
Catastrophic failure
/aspprotect/scripts/populate_config_variables_inc.asp, line 11

Once again, the looked into it and said the permissions were fine and that the code was most likely bad.  But then the errror changed to the one that I first listed.  Which is the one I am currently getting. 

BTW here is the page address

http://www.957theride.com/aspprotect/password_admin/get_me_i n.asp

Thank you!

ok, 1st we need to rule out the #1 reason people sometimes think that is not working.

Is is set up never to allow the same IP to increment the count more than once in a row so when testing it is real easy to think the count isn't working because unless you can change your ip you can not increment the count more than once per album

It's a poor mans spam abuse type of deal..
For the most part it will keep some Joker from hitting refresh 100 times and inflating the count of an album.

Do you think that is possible what is happening ?

Also, here is an older thread about the same issue?
http://support.cjwsoft.com/code/moreinfo54-2.htm

Chris:

The string is being saved and I get a .wav ring sound to confirm.  I have tried editing in "notepad" and then running the "data/show_path_info.asp" file after with the same results.

Ken

I appreciate the offer to beta test... but its really more a matter of me getting it ready..

I have a lot done.. but a lot of things are hard coded to only work on my machine and some things have not been sorted out. Giving it to someone else to test would be a waste of time at this point as I they probably couldn’t even run it.

Lately the reason this project has fallen behind has all to do with my main webserver where I collocate.

1st it got compromised (we think by certain competitors who are always up to no good)... then windows 2003 server which I decided to go with on the new server gave me random problems... then the Cisco hardware firewall was acting up and making the sites run slow....then SQL server attacks on port 1433 from Korea when I took the firewall down....and as of the last few days I think the server just needs a new power supply. I swear for the last 2 months I have spent more time administrating my servers than working on code. Yesterday it was locking up every 30 minutes. There have been a lot of days like that and it takes up all my time until I get it situated.  Especially since its over 100 miles to the collocation center. The APC unit I installed that allows me to remotely cut the power to hard reboot is a life saver.

Fun... I tell ya... and expensive.. (hardware, software, lost sales, and time) I am pretty much completely broke at the moment. It has been a very expensive few months.

But I like running my own servers... I run dns servers, email servers, sql servers, web servers.. I do it all. It's keeps me in touch with the latest software/hardware. Regardless , my servers ran well for years and they will again.


anyway.. hopefully I can actually get a new version of the photo gallery out before the month is over. It will probably be the last classic asp version. The version after that will most likely be ASP.net.

no, its part the concurrent login checking system.

currently when that is on logging off does not come into play..
(pretty much because it is such a complex system I wasnt able to make it quite that intelligent this time around)

when concurrent login checking is enabled the only way to log in again at another system with the same username and with a different IP is to wait till that time period is over

sorry

as you may recall it was rush feature at the last moment before I got version 7 finished. Hopefully I can improve on the feature in the next version but I dont really see it as being a big issue at the moment. Sometimes when you want maximum security you have to make some tradeoffs and that is why the feature is optional.

let's try this... edit that page with a text editor like notepad...

Carefully replace any instance of "Cint" with "CDbl".. I may have missed some of those when testing the last time I edited the code.

When adding a new user I am taken to a form.

There are several "required fields".

First and last names are 2 of them.

This is not needed by me and I need the company name as a required field instead. I work and deal with company names, not individuals.

So, i am unable to add any users due to this.

How can I either do away with the names as a required field or swap the individual names with the company name as a required field?

I have customers wanting to be able to view their own stats, but I need to do away with the required fields to work with my customer base.

-john

ok, I am home.. missed flight.. just got home an hour ago.

lets see.. I really need more info...

For starters are you using the delayed stats feature ? that is expirmental and could cause that problem

really all depends on the sql connection string you are using and the names of your sql user you are using...

you really havent described very much..

I'd double check all of it.. something is wrong

Hello,

Thank you for the feedback.

I would like to point out the requirements of the application however as this is something I am aware of and do address.

http://support.cjwsoft.com/code/moreinfo165-1.htm

These requirments are directly linked to from the ASPProtect v7 web page, so its not like I dont try to tell people the deal regarding SQL server.

Basically I only have the resources to provide scipts and instructions for using SQL Enterprise Manager and that is all I officially support. I also personally think anyone using a SQL Server should be using SQL Enterprise Manager because later on down the road there are things you may want to do such as backups/etc etc

Take Care,

Chris Williams
www.CJWSoft.com

I really need more info on what you have going on?

This can sometimes be cause by a slow server / bad data connection.

Sometimes caused when someone is using the option pack but did not make the proper changes to the database.

Sometimes caused when a user adds users the database on his own and does some "incorrect" things..

The more details you can provide the better. Think of anything and everything and describe it.

SQL or MSACCESS... version of either
Server OS
Using Option Pack or not
Did you have your host set permissions...

etc etc etc

Yes, that was it! I had not created the banner for that zone yet. Once I did it came up fine. Do I win the Bonehead of the Year award?

I am just implementing the product, and I deleted the included zones instead of renaming them. That is why it is up to 6. I am migrating banners from my current system before I implement the code onto my pages.

If I may, I'd like to ask another question. I use rotation on all pages of my site except for the home page, where the banners are all smaller and static - an advertiser can expect their banner to always be in the same spot on the page.

I am currently hard coding this via html, but then I do not have the ability to collect stats on home page banner clicks, so I want to use ASPBanner. My question is, can I do this without creating a seperate zone for each banner? In other words, is there a way to modify the html code (that works just fine) so that in addition to indicating the zone, it can indicate the specific banner I want to appear? I would then paste the code in each cell of the table, and alter the banner #. If I do this with just the zone, I expect that the page will randomize the position of each banner across the page. You can see what I'm talking about by clicking here: http://www.PoconoCommuter.com/

Thanks for your help!

Hey, I run a business and I will not have things like that mentioned in these forums.

Okay, this also shows at the bottom of the import/export page

I've got the IUSR account with modify permissions on this data folder as well.  Is the "this directory needs change permission" line just a general reminder?

Files are being stored in "D:\missourirealtor.org\members\aspprotect\data\export\\"

This directory needs change permissions for the anonymouse webserver account.
Those permissions can only be set by your hosting company.
These features will not work without those permissions being set.

yes. what you are talking about has to do with norton ad blocking software.. it blocks images or paths that have the word "ad" in them.. and you see red x's where images should be on web sites.. usually

it is different then what this thread initially mentions which has to do with a code/server issue with the application variables.

sorry your having so much trouble. A good host is a must.

Yes, that is most likely permissions related.
http://support.cjwsoft.com/code/moreinfo27-1.htm

You may want to read over my article on how permissions are set. It will give you a very good understanding of the process and may help yo when dealing with your hosting company.

http://www.powerasp.com/content/new/windows_2003_server_and_ permissions.asp

there is also an xp pro version of the article for people doing locl development and running iis on their xp box
http://www.powerasp.com/content/new/windows_xp_pro_and_permi ssions.asp

I think this addresses your question

http://support.cjwsoft.com/code/moreinfo144-1.htm