Has any one used the aspmail function to send emails from within your site? If so what did you use as the AspMail_Host string in the connections database?

thank you

Its still not there as labeled 'internet guest'.  There's a 'guest' and a host of others.  Is there a way to identify it as the proper guest account to use with ASPProtect?

Also, looking through support documentation, I see other possibilities it could be (http://www.powerasp.com/content/hintstips/permissions.asp).  Is there a way of telling which the problem is and whether we use a dsn connection or not?

The error we are getting is

 Microsoft OLE DB Provider for ODBC Drivers error '80004005'

[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x1340 Thread 0x17a4 DBC 0x162becc Jet'.

/aspprotect/scripts/populate_config_variables_inc.asp, line 11

I think its great to share a mod.

I will have  few with the new album.

I have a solution for asp already but thanks anyway. Is there a good book or other learning tool I can purchase that you might know about? I would know where to start about how create a timed subscription in .NET.

no, that only applies to random pictures and stats..

The issues you are talking about usually relate to issues created by switching back and forth between a local install and a live server install and not being careful about changing the paths in the settings depending on where you are running it from.

For example.. it trying to use a url at the server level that is only valid when you are running it locally

sure (XP PRO), see my article on that

http://www.powerasp.com/content/new/windows_xp_pro_and_permi ssions.asp

Banners no longer show up on my site ?

If banners were working fine and now they are just not showing up.
1st check to see that you are calling a valid zone with live banners in it.
If you are then most likely this it what hapened.

The web server must have crashed or lost power and now the application variables are in limbo/not working.

I have seen this happen 3 times. Twice on my own server when the power went out for 2 hours and once on a customers server.

Basically the application variable system gets all messed up because it was not shut down properlly.

The ways to possibly cure it are as follows.

Edit and save a banner in the system. Hopefully that gets things going again.
If not... keep reading for the more drastic cures..


Go to the command prompt on the server and type "iisreset"
Sometimes that is enough.

Reboot the server.
Sometimes that is enough.

Stop the web in the IIS console.
Sometimes that is enough.

Stop the individual processes for each web in iis
"you must really know what you doing and be very careful about doing this"

Remove and recreate new applications in IIS for the web in question.


And sometimes it just takes a combination of the things listed above and a few reboots. I don't know the best way to cure it but I do know why it happens and the steps listed above can get things back on track.

Again, this is because the server lost power or crashed as far as I know.
It was not allowed to shut down properly which sometimes happens.

You'll know things are ok again when you see your banners show up on your site.

That bit about zones makes perfect sense and seems surpassingly simple for me to integrate due to our categories and page contents being based on the same if/then functionality.

Regarding the user, I guess you mean that I could simply recreate a limited admin interface for users based on the interface you have included for me, is that correct? I realize how subjective the question is, but do you think that this would be a bad idea?

I'm leaning toward your software here. I have a budget that could easily cover a variety of programs, but the UI for advertisers at banmanpro, for example, seems far too complicated for my users. Also, banmanpro doesn't have supporting compatible softare I am interested in, such as your classifieds software.

I guess I am trying to buy a good shell from which I can do my own customization and coding, and into which I can integrate future additions such as your classified ads. Does this seem like the right place to be?

Thanks much for your time!

It should be released sometime late May 2004 or early June 2004 but no gurantees as I am pretty busy right now with some projects.

There will be upgrade instructions and it should be a fairly easy upgrade.

[/QUOTE]

Like I said no guarantee... I have a lot of things going on... it might not even be finished till the end of July... customers will always be able to get it for the difference in price

You have the version listed on the site when you purchassed it.
Version 3.0

Your users with Internet Explorer may have received the "Page Expired" error.  For ASPProtect users, it happens when  the user is not logged on and tries to invoke the target page. check_user_inc.asp puts up the login form, and IE sees it as part of the target page.  Any later attempt to Back up and reload from cache gives the errror. 

OK, I figured out the problem.  Not running ASP becasue the pages are not saved as ASP but rather HTM... OK so I am smart like a tractor but strong like an ox.

Ok nevermind that... i got by that wasn't paying attention...

The problem is even before this which i didn't know until now.

I placed the protect tag in a page i called members.aspx

When i go to this page is says ACCESS DENIED etc etc etc.

When i go to login to view this page i get the error..which i DIDNT know because i assumed it was working. This is the error im getting:

Server Error in '/MAP' Application.

---

The resource cannot be found.

Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable.  Please review the following URL and make sure that it is spelled correctly.

Requested URL: /map/users/aspprotectlogin.aspx

btw it says /map because that is the subfolder within the root folder

Hi,

I am just wondering if anyone else has had this problem. Even though the guestbook is empty, it takes just about 20 to 30 seconds for the guestbook/default.asp lto oad. Is this normal has anyone else has had this problem.

Thanks

here is a thread that may help you if this is what you were getting at

http://support.cjwsoft.com/code/moreinfo389-1.htm

I would highly suggest setting up a DSN-LESS connection.

That system dsn is most likely the source of your trouble It is probably that or permissions are still not correct.

I can't tell you how many people have had trouble with system dsn's and finally set up a dsn-less connection and everything then worked as it should.

The location of your database is fine as long as permissions are truly set correctly like I mentioned.

Also, be sure you are setting the database type correctly in the dataconn_inc.asp file. That can cause problems as well as some people have been known to delete that line.

See my articles...

http://support.cjwsoft.com/code/moreinfo9-1.htm

http://support.cjwsoft.com/code/moreinfo136-1.htm

http://support.cjwsoft.com/code/code_info.asp?TID=40&KW= system+dsn

I'm getting this error when I try to login:

 Active Server Pages error 'ASP 0131'

Disallowed Parent Path

/gallery/users/login.asp, line 19

The Include file '..dataconn_inc.asp' cannot contain '..' to indicate the parent directory.

No can do.  In both cases there is an icon that says "Not uploaded".  I click in it and nothing happens.  There is no link to upload.  Am I missing something?

By the way, I appreciate and am impressed with your rapid response. Thanks.

I am trying to protect and ASP page written in Javascript.  The first part of the page goes:

<%@LANGUAGE="JAVASCRIPT"%>
<!--#include file="../Connections/connWINGAP.asp" -->

When I insert the aspprotect code it looks like this:

<%@LANGUAGE="JAVASCRIPT"%>
<!--#INCLUDE VIRTUAL="/GIS/WCGIS/GISProtect/check_user_inc.asp"-->
<!--#include file="../Connections/connWINGAP.asp" -->

and I get this error: 

Microsoft JScript compilation error '800a03f7'

Unterminated string constant

/GIS/WCGIS/GISProtect/check_user_inc.asp, line 2

I think I understand that your code is written in VBscript and that is why it is not working.  If this is the case, how can I switch to VB to execute your stuff then switch back?

Thanks,

Jess

Banners no longer show up on my site ?

If banners were working fine and now they are just not showing up.
1st check to see that you are calling a valid zone with live banners in it.
If you are then most likely this it what hapened.

The web server must have crashed or lost power and now the application variables are in limbo/not working.

I have seen this happen a few times.

Basically the application variable system gets messed up because it was not shut down properly.

The way to cure it is as follows.

Edit and save a banner in the system. Hopefully that gets things going again.

If this happens a lot it is a server issue, not ASPBanner's fault.

if it is your own XP machine there is no reason you should edit that config file manually.

simply set permissions on the data folder and all the folders in it and the application will write to the config files on its own... if you are having problems chances are you are not setting permissions correctly.. please read all of this
http://support.cjwsoft.com/code/moreinfo56-1.htm

if is not an XP machine (your post was confusing and I am not sure) then this is an article for 2003 server
http://support.cjwsoft.com/code/moreinfo136-1.htm

Most importantly whats the real error ? error 500 does not help figure out anything
http://support.cjwsoft.com/code/moreinfo11-1.htm

lastly make sure you go into iis and make that web its own application

Please Note : ASPProtect v7.x has a new feature called groups that is much more powerful than access levels. Access Levels were left in the product primarily for existing customers that upgrade to the new version so they do not need to make a lot of changes to their site if they were using Access Levels.


More On Access Levels

Again, Examples of managing Access Levels are provided in the "multiple_access_levels" folder included in the root of the Password System. Look at the source code of the ASP pages in that folder with a text editor to see the working code.

Access Levels and how they work can be re-coded to work in many different ways. However, you have to be a good ASP developer to make changes to it. Here is some information on how they work by default.

In the "check_user_inc.asp" that comes in the root of this system Access Levels work as follows.

Level 1 has Access to - Level 1
Level 2 has Access to - Level 1,2
Level 3 has Access to - Level 1,2,3
Level 4 has Access to - Level 1,2,3,4
Level 5 has Access to - Level 1,2,3,4,5
Level 6 has Access to - Level 1,2,3,4,5,6
Level 7 has Access to - Level 1,2,3,4,5,6,7
Level 8 has Access to - Level 1,2,3,4,5,6,7,8
ADMIN has Access to - Level 1,2,3,4,5,6,7,8,ADMIN

Here is some additional info..

If the access levels are too restrictive you can ignore them all together and create your own totally custom solutions.
Here is a quick rundown of some of the things you can do.

Ok... so if you want to be really specific about what each user can see and
can't .. here's an example of what you can do

Don't use the access levels before the include file..
Don't worry about what you set a user to in the admin area since the access levels won't be used.

Do something like this..

Every time a user logs in session variables are set that you can access at
any time.. thus allowing you to know who they are.

So you could do something like this...


<%@ LANGUAGE="VBSCRIPT" %>

<!--#INCLUDE FILE="check_user_inc.asp"-->

<%
If Session("USERNAME") = "bob1267" or Session("USERNAME") = "carl45" or Session("ADMIN") = "True" Then
Session("PASSWORDACCESS") = "Yes"
Else
Session("PASSWORDACCESS") = "No"
Response.Redirect(Request.ServerVariables("script_name"))
End If
%>

The following URL explains what Redirects are.
http://www.powerasp.com/content/code-snippets/redirects.asp

That would in effect create totally custom access levels.. but you would
have to do it manually for each user.

You can also do things like this after a person logs in

Show custom html to any specific user based on either their username or
access level ... like so

say there was a menu and a certain link should only show up to username
"paully67"

you could do something like this


<HTML>
<HEAD>
<TITLE></TITLE>
</HEAD>
<BODY>


<br>
<a href="main.asp">Home Page</a>
<%
If Session("USERNAME") = "paully67" Then
%>
<br>
<a href="paullys_page.asp">Pauls Stats Page</a>
<%
End If
%>
<br>
<a href="links.asp">Links Page</a>

</BODY>
</HTML>

Or you can show custom HTML or links based on Access Levels or any other info.

You can do just about anything with if-then statements and
using the built in vbscript functions..

Hopefully this info will help to give you some ideas...

Bottom line is you have to do some work within your site to make the Access Level system really come alive.

I wonder if this could this be a FrontPage problem. I deleted the skins folder and re-ftp'd the original one that only contains default and Solid Black. I logged in and tried to change it back to default but it won't. I'm going to try making this folder a Frontpage subweb to see if that makes a difference.

Al

Our webhost set the permissions, but the error is still there, so that is obviously not the problem.  We now have both our webhost and our asp support technician trying to figure out the problem and everyone is stumped.  Can you please provide us with the following information to help us out:

1) what is the name of the file that sets the connection string?

2) what is the name of the file, if it is different from above, that sets the password of the database?

thanks

Everything seems to work fine and I thank you very much for you quick response!!!

I have seen that happen before though it usually just happens once and then after that it doesn;t show up. It's the asphttp component doing it. The ASPBanner system is not doing it. I would try using banner calling method such as the xml parser method. It's usually installed by default on 200 and 2003 servers.

Chris,

Yesterday when I would access the get_me_in page with the password key, I was then taken to the default login page.  It did not give me the option to create a user. 

Today, when I entered the password key into the get_me_in page, I was taken right to the create user page.  So, yes the problem has been resolved.  I have no idea why though.