IT worked just as cwilliams said. I did see the IP address being stored in the table but it didn't dawn on me that it was tied in to the view count, I tried it from a different IP address and it worked great .

Good coding Christopher

Thanks

John

This has not been officially released yet, but it is ready.
Here is the overview...
http://www.aspprotect.com/demo3/paypal_signup2/overview.asp

And the Code for the IPN Subscription Pack is 30.00.
http://www.aspprotect.com/ipn_subscription_support_pack.asp

A few people are using it and say it works very well.

Like the IPN Single Purchase System it is a separate directory you copy into the web site. One change must be made to your database so it’s pretty easy to get working. 

Though I am not guaranteeing this you should be able to accept Single IPN payments and IPN Subscriptions at the same time without the two bothering each other. I haven’t tested it but one customer is doing it and said it is working fine. It just involves manually specifying the IPN URL for one of the systems so it overrides the default IPN URL on your paypal settings. (As each system needs its own IPN URL) Its easy to do… just a form field you would add to the subscription form. I already looked it up. See below. 

Specifying Your Notification URL

If you only need to receive your IPNs at a single URL, you can enter that URL in the Preferences section of your Profile. If you would like to receive payment notifications for different payments at different URLs (i.e. if you need to separate payments made to different websites you run), you can manually pass the IPN URL with each payment by including it in that payment’s HTML code. Use the notify_url field to pass this information. The notify_url for a specific payment will be saved, and any subsequent updates to that payment (e.g. cleared eCheck) will be sent to that notify_url. When you pass a notify_url in your HTML code, it will override any preferences you set in your Profile. 

Anyway.. the Code for the IPN Subscription Pack is 30.00.
http://www.aspprotect.com/ipn_subscription_support_pack.asp

You are not supposed to use "../" with a virtual include

Thats goes against what a virtual include is and makes no sense.
When using a virtual include you give the path as if accessing from the root of the main web / virtual directory

I find it very hard to believe it ever worked like that and if it ever did it was wrong.

The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.

banner_redirect.asp, line 36

Database - MS SQL Server.

I have a need for more than the current number of custom fields currently available in the registration form.  Is there a documented method of adding additional fields or am I not able to do so?

Thanks,

Dave

all that docmunetation is online as well right here so you dont really need the chm file
http://support.cjwsoft.com/code/info24.htm

the chm format is a windows format that can only be viewed on windows pcs. I do not know why you can not see it. I would do reseach on viewing CHM files on whatever operating system and version you are running because perhaps you are using a mac or linux operating system which can not natively view chm files ?

Well I have the web hosting tech looking into the memory issues at this point.  Unfortunately I don't have another machine to be able to run the asp on that would run it correctly so that I can just publish it over.

Hi,

We use ASP Protect 6.0 and the database is SQL Server. Our hosting company is charging a lot for daily and weekly backups for everything. Which directories/folders do we need to backup daily and weekly incase something happenes to the site and we need to restore and get the password-protected are that works with ASP Protect to get working.

MySQL Database Setup

Use of MySQL is 100% unsupported as you can see from the site.
http://www.aspbanner.com/mysql.htm

Even still I recently had an encouter with an extremely Jerky person (read the thread above for more on that) and because of him I am adding this tutorial showing one way to set things up on a windows server using the official MySQL tools available.

Let me just say as well that there are 100's of 3rd party tools to work with MySQL databases and many ways to create the database and apply the database creation script. In the past it had to be done via the command line, but now there are a lot of visual tools you can do it with. Furthermore all hosting companies set MySQL up differently and give you access to varius interfaces to manage it which are all different, and that is primarily why I do not support it. How the hell could I support all those different interfaces many of which are totally custom?

The fact is 99% of the people that purchased ASPBanner to use with MySQL have done so without issue and love how it runs. Regardless here is how I set up a working MySQL database on a windows server proving it does indeed run with a MySQL database.

1st of all if you are setting up the server you need to download some things from http://www.mysql.com/ 
(btw: you local developers can install this on XP Pro as well if you like.)

For this article we are going to download the current non beta windows version of MySQL which is 5.0. ALso known as the Windows Essentials (x86) download. It's about 17 meg.

Because ASPBanner uses the MyODBC drivers (now called Connector/ODBC) to connect to the MySQL database you need to download those as well. (Our site flat out says this is required for MySQL use)

So I download those from here. http://dev.mysql.com/downloads/connector/odbc/3.51.html
Version 3.51 has been the current version for a couple years now.
You want the windows driver install which is about 2 meg.

The two downloads should look like this.



Now, on the webserver you run the version 5 setup (mysql-essential-5.0.19-win32.msi) I will guide you through it step by setp.



Hit Next



I am going to choose typical for the sake of this article.

Hit Next



Hit Next



Wait for a bit



I skipped this part.



Choose to configure the MySQL Now

Hit Finish

Hit Next

I am going to choose Detailed Configuration



Since I am on a development machine for this install I am going to choose Developer Machine. For a Real Server choose one of the server options.



For this article I am going to choose Multifunctional Database: You may want to pick one of the other options. That is up to you. ASPBanner will work under any of the scenarios.



I am going to leave the location at its default

Hit Next



Since this is a development machine these options are fine.

Hit Next



These options are fine as well.

Hit Next



Standard is fine for my development machine.

Hit Next



I am going to choose both of these options. The 1st one is Important and should be enabled on a real server so MySQL always runs. The 2nd is not so important.

Hit Next



Set the "root" password and do not forget it. You will need it to manage your MySQL server. I do not advise creating an anonymous account unless it is a development server and you just do not care. Whether you enable root access from remote machines or not is up to you so do some research on that. For this articles needs I am not choosing it.

Hit Next



Hit Execute and wait



If all goes well you will see this. (I actually got an error message about not being able to connect... I went to to Administrative tools/services and restarted the MySQL service and hit retry which cured that... it probably only did this to me since I have installed this before.. new installs probably will not have any trouble)

Hit Finish

Your done.. You just installed the MySQL Server (TIP: its usally a good idea to reboot and make sure the MySQL servce is running by default)

Now, moving on..

Lets install the MyODBC drivers.. (now called Connector/ODBC)

This one is a bit of a no-brainer so I am not going to go into detail.
Just run (mysql-connector-odbc-3.51.12-win32.msi) and run through all the defaults until it is done.. Choose typical when that comes up.

Your done setting up MyODBC on the server. If its not your server I guess you don't need to worry about installing all of this as its your hosts job to do that.

I believe what happened is we received the older copy of ASP Banner iwht our purchase of ASP Protect and were notified of a free update to download aspbanner_unlimited_v8.2_feb_26_2005.zip which we did, and that's the one i recently put on our site.

  Sounds from your reply that something technical is going on to the point where I will have to hire one of our Web consutants to dissect for us.  We'll try again and track our issues and send another request for information when we can show you a specific example of what is happening.  I'll be in touch.

Hallo,

What do I have to do for inserting around 6,000 new users?

I have all my user in an access file. I don't know the password of access database files. The same problem with the "aspprotect upgrade pack".

Sorry for my English

The Read-only attribute i was referring to is at the windows explorer level when looking at the folder properties under the general tab. 

ASPNET and IUSR have full access to the _database folder as you suggested - Yet still I get the permission error noted above.

I have connected to countless DB's using my own applications written in dreamweaver and have tested them on my own server and also my web facing one.  BUT this seems to be different.  no matter what I try I still get this error.

[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x440 Thread 0x6b0 DBC 0x1f995bc Jet'.

On both a windows 2000 server and also a windows 2003 server. Also using both DSN and DSN less connection and oledb.

Any help would be greatly apprectiated.

Thanks

this could go on forever...

if you want PM "private message" me info to log into your site.. show me the pages we are dealing with...

and I will take a look at it all...

CJW

How to bring up Banner Calling Code Generators

Simply go to the zones screen.
Select a Zone from the list.
Check the "Show Banner Code" option.

Click on "Display Banners in Selected Zone"

ahhh ok.. I was going to wait till morning to answer this one..

glad ya figured it out

that's they way it should be done..

the only other thing would have been to test everything with sql before trying to import any data.. and make sure all was fine at that stage




more info on the errors would be helpful.

Id' also carefully visually compare the SQL tables and fields with the SQL scripts and make sure all field types and settings got set correctly.

Also, make sure the user accessign the database has datareader and datawriter permissions of course.

Hello -

Believe it or not I finally can access the photogallery. You were right Chris regarding the unzipping of the files.

Now onto the next challenge! I have set up three categories and proceeded to create a test album. I uploaded a couple of pictures (yeah that worked!!!) but the album does not show up on the default.asp page under the category.

Please advise -
Rhona (rookie)

Does ASPprotect support Paypal's Website Payments Pro option, where a user can use a credit card directly on a web site, without passing to paypal.com?

Nick

Not a problem.  Have a good time at your wedding.

thanks!

Hallo,

Can I change the number of the access levels?

I want to have about 20 levels...

I used Dreamweaver4 to make my site is there anything I can do to make it work?

Anyone have any experience configuring PhotoGallery to use a backend mySQL database?

The application connects successfully for Read operations, but no amount of troubleshooting can get it to Write records to the tables.

http://www.marc-lisa.com/photos/default.asp

I pull that crap on myself once and a while... or my favorite is leaving a bootable CD in the drive and then wondering why the heck the OS doesn’t come back up. I pretty much promised myself back in 2002 that I would never mess with anything minor after 10PM. For whatever reason I always start messing around trying to "fix" something and end up sorry... Granted if it’s an emergency I am all for it, but I get dresses in advance anticipating the practically inevitable drive down to the datacenter.

Good luck with that, I am sure you will be much better off in the long run.

Greetings:

I am doing the initial set-up and have run into a problem. Everything has gone smoothly up to and including pulling up the get_me_in.asp page. When I enter the "PasswordEncryptionKey", nothing happens. The page just sits there without doing anything and the browser says it's opening the page, but never does. I have tried entering the value with and without the double-quotes. The value is the correct one from the config_inc.asp file. I did a copy paste from the file twice to insure I transferred it correctly.

I am running Windows 2000 server.

What now?

Warren

thanks... a review at aspin is always appretiated ...no one ever seems to do a review and they help me out a lot.. the aspprotect admin area header has a link

thanks...

you have to check the session variables for groups a little differently.. info on that is here

http://support.cjwsoft.com/code/moreinfo198-1.htm