IMPORTANT UPDATE - READ THIS
http://support.cjwsoft.com/forum/forum_posts.asp?TID=205& ; ; ; ; ; ; ; ; ; ; ;PN=1

The 2Checkout Support Pack which is built in to ASPProtect 7 contains all the pre-built scripts you need to implement 2Checkout Payments with ASPProtect. You must be using version 2 of the 2checkout system. They are phasing out version 1 regardless so everyone will be using version 2 very soon if they are not already.

THIS IS NOT INTENDED OR DESIGNED TO USE 2CHECKOUT SUBSCRIPTIONS. (see bottom of this thread for more info on that)

This Support Pack basically gives you an additional signup and registration directory "2checkout_signup" and it should not interfere with any changes or customizations you have made to your ASPProtect setup in general. New users can register in this directory and pay for membership at the same time. Existing users whether active or expired can be sent to this directory where they can lookup their account and buy additional membership time online. You can also assign various Access and Group Levels during signup and you can set up various prices for various amounts of time as well. This is a real-time setup for the most part. As soon as a user pays via 2Checkout your system is updated and they will have access.

The 2checkout pack is NEW.. and was released on March 19, 2005. If you don't have it and would like it please just ask.

To start using this edit the "2checkout_signup/2checkout_config_inc.asp" file

You will be entering your 2Checkout Account number in that file as well as the URL you want a user to go to after payment. It is all commented in that file. (There is also a testing variable you can set to True if you want to do testing without real charges being applied)

After editing that file run this page.

http://www.mysite.com/2checkout_signup/show_postback_path.asp

Replacing the part in blue with your website info.

It will report back that postback url you need to use in the 2checkout system.

Log into your 2checkout version 2 account and under the "look & feel section" enter that postback url for both the "Approved URL" and the  "Pending URL"

Trust me: You want the URL there for a pending URL because the 2Checkout system is quite random and 95% of the payments that come in go to the pending URL and end up being legitimate sales. (at least for me they do)

Now make sure the Direct Return option on that page is on as well. 

If set to Yes buyers will be immediately directed to your URLs below once they click the Complete Order button. If set to No the buyers will have to click a button to return to your URLs below.

Save that page... and leave 2checkout.

Now, delete this page from your ASPProtect setup.
http://www.mysite.com/2checkout_signup/show_postback_path.asp

It's a minor security risk and is no longer needed needed.

The basic setup is finished. All you have to now is set up payments options the way you want them.


Changing Payment Options

In the "2checkout1.asp" file there are form options set up.

They look like this and you can have as many as you like.

<option selected value="30,9.95,3,">30 Days, 9.95</option>

In this option... A user has the option to purchase 30 days for $9.95 and he will be set to Access Level 3 when payment in completed.

Here is how it works.

The value setting (red) is essentially and array that can be made up 4 elements separated by comma's
They must be separated by a comma and there can be no spaces. In this example the 4th value was not used but the last comma must still be there. If you didn't want to set an access level and left out the "3" there would 2 commas at the end.  etc etc
Basically there must always be 3 commas but you only have to set the 1st 2 values which are days and price.

days,price,access level,groups

The 1st value is the amount of days.
The 2nd value is the price for the amount of days.
The 3rd value is the access level you want to user assigned to.
The 4th option is the groups you want the user assigned to. (see PayPal subscription thread for examples of specifying group info)

Now, the label for the option in (blue) can say whatever you like.

Okay, thanks, I'm going to change the method tonight and see if it makes a difference

I'll report back

Dave

I am running Windows 2000 server. I do believe asp.net IS installed as I have the .NET 1.1 framework installed.

Funny about the bounce backs. I am at about 10% of my limit, which I control as I am the network admin. I'll check into that.

yeah.. I cant say for sure.. as I have never really tried to get it working in xp pro.

Last time I actually used cdonts locally was on a 2000 box

I would do a google search on xp pro, smtp service, and cdonts and let us know what you find out.

All of our apps can use free 3rd part emailing components as well so maybe try some of those. Course you need a valid email server to connect to.

Sorry, there is no option for that.

I'll take it into consideration, but the way the banner rotation logic works would make adding such an option very complicated.

Just give it  an expiration date way into the future if you do not want an ad to expire anytime soon.

I usually just make all my ads expire in like 2020 or something like that since I don't want them to stop running either on some of my sites.

  Much thanks, the duplicate incl's I spaced on and should have caught.  The hidden form variable was a key issue.  Thanks for the syntax and the help.  Now I get this page together. j  As a note - I got faster results by dropping my timeout to 3 minutes temporarily while progging and cleared browser cache between tests.  Thanks again.

I would look on the pictures folder on the server and see what is there for pictures. Also, when you see a broken X on the site right click and see where it is trying to get the picture from and what the pictures name should be.

I would also be sure to clear out your temporary internet files in IE. clost and restart all browsers..

maybe show me the site ? so I can see this happening ?

thx, thats a known error I forgot about.

I just updated the zip archive so the error is gone but if you bought ASPBanner Unlimited Version 7.3 Before April/06/2004 you can optionally apply the fix.


To fix it (only if you want to use the option explicit method of calling banners and not even a really necessary fix as this is just an error in the generated code your supposed to use)

Just edit aspbanner/zones.asp with a text editor.

Where you see the double dim carefully remove one of the "dim" s and save the file.

Hi Chris,

When I run the physical map test this is what I get:

The Physical path to this virtual website is: \\NAWINFS04\home\users\web\b2623\rh.vickery2004

Will that work correctly without a drive letter specified?

Thanks

Rhona

Great suggestion, routing the banner click through an intermediate page before the destination.  We use Deepmetrix LiveSTATS.xsp V7 and I should be able to configure a filter to capture the stats of the intermediate page.

Thanks for the help!
Lance

I believe what happened is we received the older copy of ASP Banner iwht our purchase of ASP Protect and were notified of a free update to download aspbanner_unlimited_v8.2_feb_26_2005.zip which we did, and that's the one i recently put on our site.

  Sounds from your reply that something technical is going on to the point where I will have to hire one of our Web consutants to dissect for us.  We'll try again and track our issues and send another request for information when we can show you a specific example of what is happening.  I'll be in touch.

Understood.... can you point me to a place where there are other methods of calling banners?  Do you mean not use Flash?  I am new to this and will need some pushing over the cliff!

Thanks

Dave

Hi,

I basically explained how I thought that might work here where I went over everything I could think of and suggested you download the free version and see if you could get it working
http://support.cjwsoft.com/code/moreinfo488-1.htm

The part about using the alternate scenario involving querystring info from a url.

I have never done anything like that and that is why I told you what I knew and suggested you try it with the free version...

I am getting closer.

This error actually does not have anything to do with the forgotten password feature or your database.

It has to do with the settings you chose for emailing.

it relates to aspmail and it not liking the remotehost you used, or something like that.... etc etc

hello,

There is no built in option. You would have to add code to do that.
Its not difficult but custimization like that is not something I support.

I have narrowed it down.  The ../ for includes will not work with .asp files but will work in .shtml files.

any ideas?

I have been using this solution for over a year now and think its great, however I recently logged on to add a banner and when I clciked on the link that opens a window, displaying all the gifs in the directory../images/banners/, now images showed up, however they do exist in that directory.

I recently upgraded my computer and am now using windows XP...could that be the problem?

Thanks

I Dont know... it shouldnt do anything like that.

if it ever asks to download a aspx or asp page its generally a server configuration issue not related to the actual code

provided you arent trying to grab the injectbanner page through an iframe call which is only for use with the javascript method of calling banners

Ok, so I checked to see if ASP is running on the server and it is.  then I added code to the top of a page and this is what i can see when 'view Source' on the web browser:

<%@ LANGUAGE="VBSCRIPT" %>

<!-- Begin ASPProtect Code -->
<!-- Groups with access to this page. ( * Admins * ) -->
<% GROUPACCESS = "4" %>
<! #INCLUDE FILE="check_user_inc.asp">
<!-- End ASPProtect Code -->

<html>
<head>
<title>TeamManagers</title>

Yet I get no challenage for a password and no error message!

how you connecting... lets see the connection string...

could be permissions related too.. if they are not set correctly
(always give them to the folder, never just the mdb file)

Some of this might help...

http://support.cjwsoft.com/code/moreinfo11-1.htm

http://support.cjwsoft.com/code/moreinfo136-1.htm

http://support.cjwsoft.com/code/moreinfo56-1.htm

you may want to download some of the different versions of the access database from the support area and try connecting to them as you may have older odbc drivers on the server

You may also want to try to get ASPTest from our website working before you go any further

Chris,

Yesterday when I would access the get_me_in page with the password key, I was then taken to the default login page.  It did not give me the option to create a user. 

Today, when I entered the password key into the get_me_in page, I was taken right to the create user page.  So, yes the problem has been resolved.  I have no idea why though.

Now I am having trouble using the log function. 

I have checked the box in administration area for UseLogFiles.  I have put the expected path for the LogFileDirectory in the box.  I have modified the permissions for the anonymous web site user to modify this directory.  However the log file does not get updated and there is nothing when I go to view the logs. 

thx

When using this code:

<!------- ASPBanner Ad code ------------->
<script language="JavaScript"> var code = '';
var now = new Date();
var nIndex = now.getTime();
document.write('<s' + 'cript src=" http://www.poconocommuter.com/aspbanner/injectbanner.asp?Ban nerZone=6&nocache=' + nIndex + '">');
document.write('</' + 's' + 'cript>');
</script>
<script language="JavaScript">document.write(jscode);</script& gt;
<!--------- End ASPBanner Ad code --------------->

I receive an error that jscode is undefined. The banner will not display.

Any ideas how to fix this?

Its still not there as labeled 'internet guest'.  There's a 'guest' and a host of others.  Is there a way to identify it as the proper guest account to use with ASPProtect?

Also, looking through support documentation, I see other possibilities it could be (http://www.powerasp.com/content/hintstips/permissions.asp).  Is there a way of telling which the problem is and whether we use a dsn connection or not?

The error we are getting is

 Microsoft OLE DB Provider for ODBC Drivers error '80004005'

[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x1340 Thread 0x17a4 DBC 0x162becc Jet'.

/aspprotect/scripts/populate_config_variables_inc.asp, line 11

BTW.. I dont know what is going on But I keep getting all these returned emails. My forum is sending you emails and they are coming back as undeliverable saying your storage space is exceeded on your server.

User Information

After a user logs in there are variables that you can always access.
They can be used to check various things or to display information
dynamically based on who has logged into the system.

   Session("PasswordAccess")
   Session("Access_Level")
   Session("Admin")
   Session("Active")
   Session("Expiration_Date")
   Session("User_ID")
   Session("Groups")
   Session("Redirection_URL")
   Session("Password")
   Session("Username")
   Session("First_Name")
   Session("Last_Name")
   Session("Company_Name")
   Session("Email")
   Session("Address")
   Session("City")
   Session("State_Province")
   Session("Zipcode_Postal_Code")
   Session("Phone")
   Session("Custom1")
   Session("Custom2")
   Session("Custom3")
   Session("Custom4")
   Session("Custom5")
   Session("Custom6")

You can display them on a page at any time using Response.Write like so

<% Response.Write(Session("FIRST_NAME")) %>

or like this

<% = Session("LAST_NAME") %>

I've encountered another problem.  When i edit the link for existing banners and save it, the banner reverts to the old link instead of the new one.

The directory where the the database is located to rwed so the permissions is not a problem.

Any advice?

Thanks