Hello,

If you see that when doing a view source then that code is not running.

I will need to go into your site and look as something is very wrong on a low level and I have no more ideas.

PM or email me the info and I will figure out what is going on.

I'll need ftp or frontpage access to the site.
I'll also need to know the urls for the asprotect system as well as the page you are trying to protect.

CJW

               Also, I’ve been trying to modify the code to adapt it for our application -- by removing fields that we do not need such as address, city, state, phone, but I am having trouble getting visual studio to compile.  It could be due to the fact that the rest of the project is in C#.  Or it could be due to some other factor in ASP Protect.

Hello Chris:

Let me run some more test if it's working on your end it should be on mine?  I have made some custom updates to the code but no in that area.

Thanks,
-Ricardo

I'd say that the vendor is right so I've submitted a work order to
create the *****.com/aspnetprotect directory as an application.
If there are any other directories for which this needs to be done,
please let us know. This particular task always needs to be performed
by our staff.


If you need to follow up on this job with one of our on-line or phone
technicians, you can reference ticket id 11860.

With regards

Glad it worked

Editing using Visual Studio.NET

Here are directions for editing the application using Visual Studio.NET
2002 or 2003 version.. either should work

Some of you are wondering why I didnt just give you the project files.
It is best you go through this process and really understand what is going on.
Also, I dont use VS 2002 so I wouldnt be able to give you project files that would work with that. Not to mention there is 100% chance my prject files wouldn't work for you anyway because of path differences and other things.


Anyway.. on with the instructions...

1st.. make sure IIS, ASP.NET, .NET Framework, and Visual Studio.NET are all installed correctly and up to date.

Open Visual Studio.NET

File -  New Project

Select a New Visual Basic ASP.NET web application.

give the new web to be created a name.. I called mine "aspprotectdotnet"

Hit Ok..

Now. once the project opens up we need to delete a few things in the solution explorer window.

So delete "webform1.aspx" , "deletestyles.css", "Global.asax", "AssemblyInfo.vb", and "web.config"

Basically all the files under the project...

Now... you should have the aspprotect.net files unzipped somewhere on you hard drive...

open that folder and select all the files and folders like so




Now drag those selected files and folders to the solution explorer window of Visual Studio.NET right on to the name of the web. In my case "aspprotectdotnet"

It might say this folder already contains a folder names Bins.. just tell it to copy over and continue on any prompts like that.

You'll notice your project is now populated.

Open up the references tab in the solution explorer window as we need to add some references to the dlls in the bin folder of this project. This is needed so the compile process and function correctly.

Right click on references.. click add reference
Then browse....browse on your hard drive to the location of the new web and the bin folder within it. 

In my case... "C:\Inetpub\wwwroot\aspprotectnet\bin"

Choose "aspprotectlicense.dll"

Hit open...

Now do the same thing again until you have added all the dlls in that bin folder to the references.. 

Now.. click add-references again and this time choose
"system.management" from the choices in the .NET tab

Once all of that is done your references should look like this




Now in the Visual Studio.NET menu system up top..

Choose Build - Build Solution

If you did everything right you will see something like this in the build window

------ Build started: Project: aspprotectdotnet, Configuration: Debug .NET ------

If you have found out that parent paths are disabled on the web server you can still use the application.

Before you continue.

If it is your server consider enabling parent paths to solve the problem.

If it is not your server consider asking them to enable parent paths for your web site to solve the problem.

If that is not possible please download this zip file.
2005-02-20_150703_aspprotect_v7.x_alternate_include_file_pat hs.zip

This zip file contains 3 sets of alternate files depending on your situation. You simply replace your existing aspprotect v7.x files with these new ones.

The zip file contains the following folders and files.

Below is the contents of the readme.txt file which explains everything.

The following folders each have a version of all the files in the ASPProtect system that might need to be edited in case you need to change the paths for the server side include files. There are 3 different scenarios.

(parent paths enabled) - This is the way the application comes.
The files in this folder have FILE server side includes containing "../" information. While these includes will work when the applicaion in is any location of a website they will not work if parent paths are disabled on the web server. Generally you will want to use these on your xp development machine. You can of course use them on your real server if parent paths are enabled. Parent Paths are now disabled on II6 by default and some hosting company will not enable them.

(domain root)
The files in this folder have VIRTUAL server side includes in them.
These includes only work when the applicaion is installed in the root of your web domain. For example if your domain was called "www.somedomain.com" the following aspprotect files and folders would end up like this
"http://www.somedomain.com/check_user_inc.asp"
"http://www.somedomain.com/password_admin"
"http://www.somedomain.com/users"

(domain directory)
The files in this folder have VIRTUAL server side includes in them.
These includes only work when the applicaion is installed in a directory called "aspprotect" in the root of your web domain. For example if your domain was called "www.somedomain.com" the
following aspprotect files and folders would end up like this
"http://www.somedomain.com/aspprotect/check_user_inc.asp"
"http://www.somedomain.com/aspprotect/password_admin"
"http://www.somedomain.com/aspprotect/users"
You can change the name of the "aspprotect" directory but you will will have to edit the includes in the files.

Lastly, if you are on a local machine and insist on using the VIRTUAL INCLUDES you would also use the (domain directory files) even though you dont have a domain on your local machine most likely
For example if your site was installed like so.
"http://localhost/aspprotect/check_user_inc.asp"
"http://localhost/aspprotect/password_admin"
"http://localhost/aspprotect/users"

Umm, if your using MSACCESS your using MSACCESS

SQL server has nothing to do with it.

ok, 1st we need to rule out the #1 reason people sometimes think that is not working.

Is is set up never to allow the same IP to increment the count more than once in a row so when testing it is real easy to think the count isn't working because unless you can change your ip you can not increment the count more than once per album

It's a poor mans spam abuse type of deal..
For the most part it will keep some Joker from hitting refresh 100 times and inflating the count of an album.

Do you think that is possible what is happening ?

Also, here is an older thread about the same issue?
http://support.cjwsoft.com/code/moreinfo54-2.htm

I believe what happened is we received the older copy of ASP Banner iwht our purchase of ASP Protect and were notified of a free update to download aspbanner_unlimited_v8.2_feb_26_2005.zip which we did, and that's the one i recently put on our site.

  Sounds from your reply that something technical is going on to the point where I will have to hire one of our Web consutants to dissect for us.  We'll try again and track our issues and send another request for information when we can show you a specific example of what is happening.  I'll be in touch.

IT worked just as cwilliams said. I did see the IP address being stored in the table but it didn't dawn on me that it was tied in to the view count, I tried it from a different IP address and it worked great .

Good coding Christopher

Thanks

John

I'm getting errors when clicking the Update Config Button in the System Info page and when clicking the log files button.

I'm not sure if it's a permission thing or not.  ASPNET and IUSR both have modify access to the _database folder and childs, yet I'm still getting the error:

Access to the path "D:\Inetpub\wwwroot\aspprotectnet\_database\xsd\aspprotectne t_config.xml" is denied.

Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Exception Details: System.UnauthorizedAccessException: Access to the path "D:\Inetpub\wwwroot\_database\xsd\aspprotectnet_config.xml" is denied.

ASP.NET is not authorized to access the requested resource. Consider granting access rights to the resource to the ASP.NET request identity. ASP.NET has a base process identity (typically {MACHINE}\ASPNET on IIS 5 or Network Service on IIS 6) that is used if the application is not impersonating. If the application is impersonating via <identity impersonate="true"/>, the identity will be the anonymous user (typically IUSR_MACHINENAME) or the authenticated request user.

To grant ASP.NET write access to a file, right-click the file in Explorer, choose "Properties" and select the Security tab. Click "Add" to add the appropriate user or group. Highlight the ASP.NET account, and check the boxes for the desired access.

Any ideas?

Thanks

I was actually able to do similar thing by allowing our dedicated search engine to access the site unchallanged.

<%
If Trim(Left(Request.ServerVariables("HTTP_USER_AGENT"),11)) = "MYPASSWORD" Then  
 SearchFlag = True
End If
 
If SearchFlag <> True Then
If Session("Access_Level") > CHECKFOR or Session("Access_Level") = "" Then 
%>
<!--#include virtual="/Auth/check_user_Code.asp" -->
<head>
<title>My Title</title>

</head>

<body>

My Protected stuff here

</body>

</html>

For this to work, the search engine must pass the PW to the web site. I just was not sure how to do the same thing with IPs. I will play with the code and see what happens. If it works, I will post it here to help others, if this is OK with forum rules.

Thanks,

Mo

[/QUOTE]

I just added couple of lines and it works fine

If (Request.ServerVariables("REMOTE_ADDR")) = "xxx.xx.xxx.xxx" Then 
 ' Session("PasswordAccess") = "Yes"
 SearchFlag = true
End If

I have noticed that during the file import, that some of the pictures get messed up.  I can import aroun 150 pictures into different albums, say 3 albums with 50 each.

I have noticed however that some of the get messed up.  What is happening is...the thumbnail will be correct, but after you click it the picture that shows up is one form a different album.

Any cure for this?

I have been having some display issues with the .NET version of ASPBanner.  I set the size of the image, and I set the size of the banner and there is still white space above and below the image.  I am not using a text link below the banner, so I have it set to blank.

Here is a link to my page. 

http://www.nababaseball.com

Two of the three banners in the rotation on the main page have non-white backgrounds so it's easy to see the issue I'm talking about.

Is there a way to tighten up the formatting so that the image fits onto the page in the size specified?

JDooley

sure and thats probably what you should do... that pure asp upload thing must not be able to handle the size of your import file... another thing which can very .. also some versions of IIS require registry changes to upload bigger files via asp code alone

sorry your having so much trouble. A good host is a must.

Yes, that is most likely permissions related.
http://support.cjwsoft.com/code/moreinfo27-1.htm

You may want to read over my article on how permissions are set. It will give you a very good understanding of the process and may help yo when dealing with your hosting company.

http://www.powerasp.com/content/new/windows_2003_server_and_ permissions.asp

there is also an xp pro version of the article for people doing locl development and running iis on their xp box
http://www.powerasp.com/content/new/windows_xp_pro_and_permi ssions.asp

Right,  I've done that.  My concern is that it will time out again while I'm trying to import the file.

The import/export manager does not show up under the users tab when I log in normally.  I have to pull up the page in frontpage and then preview it a browser to get it to show.

Hello,

Sorry, I do not have any good ideas on this one...
Domain Name Masking can cause issues with quite a few things.

Okay,  I deleted out the aspprotect folder and started over.  I also took out the dsn connection to the ecommerce database and deleted out the subweb that had it, I decided to use another provided where the database is resident on thier servers not mine.

I broke my txt file into groups and it's loading sort of.  The first 1000 users uploaded fine...the second said it timed out, but when I looked at the access database it showed 2000 people.   The login still times out and every page seems to load incredibly slow still.

I dont know. Perhaps a fresh installation in a new folder would be a good idea as well if possible..

for troubleshooting sake..

I dont know about your error on line 6 when uploading..

as far as the manaully edited import file not working I would really need to see it. There has to be somethin wrong with it's format.

I really need more information and possibly acess to the system to do some troubleshooting...

This is anot a feature anyone has ever had an issue like this with.

Hi there,

Just bought ASPProtect 7.0 last week and just got around to installing it. I've gotten through the installation and am now trying to test the (Forgot Password) functionality.

I get the following error when I type in the e-mail (or in some cases the username) and Post the form. 

Error was [11004] Valid name, no data record of requested type

I know that the add user functionality is pointing to the correct database (I see the additional rows via SQL Enterprise Manager) and that the e-mail address I am looking for is in the SQL database. 

Any ideas? Any other information you need?

Thanks,
Toni

I would say that it isn't all that difficult using mySQL for the backend....the main thing is to make sure you set the primary keys for auto-incrementing in your database.  Alos need to make sure that any DELETE SQL statements are formatted like this

DELETE FROM tblName WHERE tblField=SomeValue

and not

DELETE * FROM tblName WHERE tblField=SomeValue

The same holds true for using MSSQL

Hi Chris,

The password is HANNAH.  If you're into trouble shooting mode and would like the key, I can send it to you.  If not, no big deal, I've email the guy a new password.  We'll see how many rounds it takes him to get it right. 

Thanks,
Mick

Every application we sell that has a password on the database uses "temp"

Also, the password is in the connection string in the dataconn_inc.asp file.

After all, the ASP code needs to know the password just like anyone that wants to open the database would.

[/QUOTE]

That i have, my question revolves around the all the users and passwords that I in that database. I need to be able to export that list to word for a mail merge list, but when I do the passwords show up encrypted. I need to be able to get an unencypted list.

thanks

humm.. their FAQ is interesting...it looks like some sort of .NET configuration issue regarding security policies like you mentioned

Thats one of the big problems with hosting .NET. Some hosting companies just do do some oddball things. ASPProtect.NET works under default conditions but when hosts go around locking things down to the max there is bound to be trouble. This is the 1st I have heard of this.

Now, ASPProtect.NET does use the "System.Data.OleDb" and "System.Data.Odbc" which your host says they block because they require full trust.

All I can really say at the moment is go with a hosting company like www.alentus.com or www.maximumasp.com that does not restrict your .NET abilities so much.

In the meantime I am going to ask John Evans what he thinks about this.

I checked the option pack code as well and it looks correct.
I tested it and it acted as it should.

You can see it in active at the live demo
http://www.aspprotect.com/demo3/demo.asp

admin
test

go the the admin area.. you will notice 3 users with level 4 access
1 of them is inactive

then go to the mass email area and pick   active and level 4
it will say it is sending email to 2 users which is correct

then go to mass email again and pick level 4 and inactive
it will say it is sending email to 1 user which is correct

choose any status and access level 4 and it will send email to 3 users which is correct

When you do this please realize you can not choose a group as well.
That will cause a problem because you can not choose a group and an access level at the same time.


Anyway... perhaps you can private message or use the contact us form and and let me take a look at your system. Since I can't reproduce the behavior that is the only way we might figure this out.