Its still not there as labeled 'internet guest'.  There's a 'guest' and a host of others.  Is there a way to identify it as the proper guest account to use with ASPProtect?

Also, looking through support documentation, I see other possibilities it could be (http://www.powerasp.com/content/hintstips/permissions.asp).  Is there a way of telling which the problem is and whether we use a dsn connection or not?

The error we are getting is

 Microsoft OLE DB Provider for ODBC Drivers error '80004005'

[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x1340 Thread 0x17a4 DBC 0x162becc Jet'.

/aspprotect/scripts/populate_config_variables_inc.asp, line 11

I'll give it a shot loading it on the laptop and publishing it, if it doesn't work I'll let you know and you can take a look at it tomorrow afternoon.  Thanks for all the help tonight...

Good luck pouring that concrete!

that wont work the way you did it because groups are not stored like like.

groups are stored "*1*"
or "*1*,*9,*"

so if you test for them you must do so using the InStr function of vbscript

example:

If InStr(Session("Groups"),"*1*") Then
    ' do whatever
End If

also.. as for the session variable
it should be    Session("Groups")

And in Version 6.... (its all ready to go in version 7) that session variable must be saved in the check_user_inc.asp file near where all the others are saved. If it is not there by default "I dont remember if it is or not" you have to add it like so near where all the others are saved

Session("Groups") = CmdCheckUser("Groups")

If you are wondering if it is being saved correctly you can always response.write out the Session("Groups") to see if it holds a value

Sounds to me like you got some bad databases or something. Or your trying to open a database with too old of a version of msaccess.. not sure

Everything is stored in one database. And yes there is more than just the users table.

Also,  removing the "temp" password should be a piece of cake.

Email me for a new copy of the download file ? Use the contact from on the cjwsoft site. Please tell me your order details as well so I know who you are.

sorry.. you just said above you were using XP SP2 so that is the article I referred you to as I just assumed you were talking about your local web server

here is my article on permissions regarding server 2003
http://www.powerasp.com/content/new/windows_2003_server_and_ permissions.asp

I can look at your installation monday if you like. In about an hour I leave for a wedding thingie and I wont be around again untill monday around noon

Try the uploading using VBSCRIPT method just for the heck of it. Perhaps there is an issue with the installation of the dundas component.

CJW

Hello,

1.)

I dont really have any ideas about the japanese characters. I also don't have any ideas about changing settings in the database. Your going to have to do some research on all of that.

Perhaps try pasting the text into a text document 1st.. then copy/paste them into the application. Perhaps that will eliminate any unseen weird characters. I do it sometimes when pasting things from word to my html editors and it works great.


2.)

I dont/cant support custimization to the code but here are some tips to get you started.

edit "items_inc.asp" carefully with a text editor
(back it up before you begin so you can revert back)

change this anywhere you see it

?SORTBY=Name

to

?SORTBY=Name+Asc

or

?SORTBY=Name+Desc

Expiriment to see which gives you the desired sorting.
Do the same process for the price.
The + Sign just passes a "space" back to the page in the proper format if you are wondering.

3.)

The items for page setting is easy. Just go to the settings page when logged in as the admin. Edit this field.   "ResultPageSize"

Regarding hosting companies..

Now.. obviously if you are hosting on someone elses server you may not be able to set permissions like this.

Ultimately, if you are hosting somewhere and ASP and Database connectivity is part of your hosting plan. It is the hosting company's responsibility to set these permissions for you when asked or to give you a special interface to do so on your own. If they are not helping you do this then maybe it is time to get a hosting company that is serious about your ASP Hosting Needs.

Also... JUST TO BE PERFECTLY CLEAR

The permissions we are talking about cannot be set via FTP or Frontpage access to your web site. They must be set like shown above or via a special interface meant to set the permissions correctly. For all you people out there messing with the permissions you see in FTP and Frontpage.. you are wasting your time and possibly creating problems in your web.

All ASP scripts that communicate with an Access Database, Upload Pictures, Modify Text files.... are going to need these permissions set in some way or another. We have no control over that fact.

Hi,

The source code comes with it.
They are the.vb files.

I don't give out any project files for reasons stated in the article below.

Please read this in full if you want to edit the application in Visual Studio.NET

http://support.cjwsoft.com/code/moreinfo85-1.htm

If you want to have a login form on a non protected page that posts
to a protected ".asp" page use code like this.

Change the action of the form to the page you want them to log into.
Make sure to page you send them to is protected by the "check_user_inc.asp" file.

<center>
  <table border="0" width="400" height="200" bgcolor="#000000">
    <tr>
      <td bgcolor="#F4F4F4">
        <form method="POST" action="memberarea.asp">
          <input type="hidden" name="Status" value="Checkem">
          <p align="center"><font face="Arial">ASPProtect Login</font></p>
          <div align="center">
             <center>
             <table border="0" bgcolor="#C0C0C0">
               <tr>
                 <td bgcolor="#EBEBEB"><strong><small><font face="Arial">Username</font></small></stro ng></td>
                 <td><input type="text" name="Username" size="10"></td>
               </tr>
               <tr>
                 <td bgcolor="#EBEBEB"><strong><small><font face="Arial">Password</font></small></stro ng></td>
                 <td><input type="Password" name="Password" size="10"></td>
               </tr>
               <tr>
                 <td bgcolor="#EBEBEB" colspan="2"><font face="Verdana, Arial, Helvetica" size="-1"><input type="checkbox" name="KEEPMESIGNEDIN" value="True">Keep
                   me signed in on this computer unless I log off.</font></td>
               </tr>
             </table>
             </center>
          </div>
          <div align="center">
             <center>
             <p>&nbsp;<input type="submit" value="Login"></p>
             </center>
          </div>
       
        </form>
      </td>
    </tr>
  </table>
  </center>

is that lindsey lohan and her fake boobs as ur avatar?

I am installing IIS and all of its glory on the other computer now... gotta love remote desktop (the pc is at work  )

as far as sql goes if you follow the instructions with give for setting up a new database you shouldnt have any issues and permissions should be already set. because we handle that in the sql script we give you.. "its a good thing to look at and it is pretty easy to understand what is going on""

however using another account could cause permissions issues.."yes, even sa"     basically the username your using needs datareader and datawriter permissions to all tables used by the photo gallery system and you probably have to go specifically set them usin ght e security tab for your database in enterprise manager. This is more of SQL server 101 than anything to do with the Photo Gallery Code so I am not going to get into it too deeply, but that is definetly the issue.  Permissions...

Some users have reported an error during the registration process.
Here is what I believe is happening.

When you register you get sent a validation email that has a link in it that looks something like this.

http://support.cjwsoft.com/forum//activate.asp?ID=testAD3AD2 97BC

That link can only be clicked on once which will activate your account.

If you somehow run that link more than once you will get a message telling you there was an error.


I think some people are double clicking on the link they get sent and running it more than once.... or clicking on it again after registration is complete. It probably happens very fast so they never see the success screen.

Either way, if you can login to the forum nothing is wrong and you are already activated.

AUGUST 12th 2004

NEW VERSION OF ASPBANNER IS BEING RELEASED THIS WEEK

ASPBanner Unlimited Version 8.0

It is completely finished.

http://www.aspbanner.com/

This new version has more features and is selling for $99.95

Unlimited Version 7.3 is now named "ASPBanner Standard"

Owner's of Unlimited Version 7.3 can get an upgrade to Unlimited Version 8 for the difference in price (based on current pricing)

It is available now for purchase at the following link .

http://www.aspbanner.com/purchase_unlimited_v8.1_classic_upg rade.asp


The new version can use your existing database so it is a fairly easy upgrade.

If you are not an existing ASPBanner Customer you can use the following link to purchase the application normally.

http://www.aspbanner.com/purchase_unlimited_v8.1_classic.asp


Notes on the new version:

ASPBanner Unlimited Version 8

Improved graphics and some new icons

New reports screen... 4 reports total   3 of which are new

New Iframe Banner Calling method with built in auto refresh feature so banners can rotate at a specified interval on their own

New Zone Order Informaion Page
Visually shows you what the current rotation looks like for a zone

Banners can now be stopped at a certain date and at an impression limit
Whichever is hit 1st.. before it was just one or the other

New "data" folder... this new directory is the only directory that needs permissions
this should make setting up the system and permissions a breeze.. all cjwsoft applications will
eventually use this same folder

New configuration text file... eliminates config table in the database and allows us to easily
add more config options in the future without changing the database.. means easier upgrades down the road
and faster loading of the configuration data

New application data connection wizard
makes setting up the data connection a no brainer

more overall emailing methods supported

CDONTS
CDOSYS
ASPEMAIL
ASPMAIL
ASPSMARTMAIL
DUNDASMAILER
JMAIL
SASMTPMAIL
Bamboo Mail
Simple Mail
ASPQMail
QuickSoft EasyMail Objects
OCXMail

Persists ASPEMail now supports outgoing SMTP authentication.
Simple Mail now supports outgoing SMTP authentication.
It is becoming popular for ISP to use this.

Emailing code now uses functions so we can easily add more email component support down the road

Flash files (.swf) can now be previewed and used in new banner right from the upload page
before this could only be done with image files

Users page now has a notes popup feature
when you hold the mouse over the icon you see all info on a user without needing to edit that user

Edit banner page now shows the color of the banner status in the dropdown menu

New clone banner feature.. allows you to easily create similar banners

Banner application page has been optimized to be even more efficient

Javascript popup calendar date selectors

Ton of misc little things & Improvements...


Some Screenshots

Testing for XML Parser Support

the microsoft xml parser is generally installed by default on all new server setups..

It allows ASP code to make calls to other pages anywhere on the new as well as a lot of other handy things..

download and run this ".asp" page to verfiy that it is installed and be sure it is available for you to use

2004-12-10_132620_test_xmlparser.zip

Make sure you run it from your web server through the web browser

Thanks, I'll take a look.

Nick

Editing using Visual Studio.NET

Here are directions for editing the application using Visual Studio.NET
2002 or 2003 version.. either should work

Some of you are wondering why I didnt just give you the project files.
It is best you go through this process and really understand what is going on.
Also, I dont use VS 2002 so I wouldnt be able to give you project files that would work with that. Not to mention there is 100% chance my prject files wouldn't work for you anyway because of path differences and other things.


Anyway.. on with the instructions...

1st.. make sure IIS, ASP.NET, .NET Framework, and Visual Studio.NET are all installed correctly and up to date.

Open Visual Studio.NET

File -  New Project

Select a New Visual Basic ASP.NET web application.

give the new web to be created a name.. I called mine "aspprotectdotnet"

Hit Ok..

Now. once the project opens up we need to delete a few things in the solution explorer window.

So delete "webform1.aspx" , "deletestyles.css", "Global.asax", "AssemblyInfo.vb", and "web.config"

Basically all the files under the project...

Now... you should have the aspprotect.net files unzipped somewhere on you hard drive...

open that folder and select all the files and folders like so




Now drag those selected files and folders to the solution explorer window of Visual Studio.NET right on to the name of the web. In my case "aspprotectdotnet"

It might say this folder already contains a folder names Bins.. just tell it to copy over and continue on any prompts like that.

You'll notice your project is now populated.

Open up the references tab in the solution explorer window as we need to add some references to the dlls in the bin folder of this project. This is needed so the compile process and function correctly.

Right click on references.. click add reference
Then browse....browse on your hard drive to the location of the new web and the bin folder within it. 

In my case... "C:\Inetpub\wwwroot\aspprotectnet\bin"

Choose "aspprotectlicense.dll"

Hit open...

Now do the same thing again until you have added all the dlls in that bin folder to the references.. 

Now.. click add-references again and this time choose
"system.management" from the choices in the .NET tab

Once all of that is done your references should look like this




Now in the Visual Studio.NET menu system up top..

Choose Build - Build Solution

If you did everything right you will see something like this in the build window

------ Build started: Project: aspprotectdotnet, Configuration: Debug .NET ------

The application automatically generates all the code for you for each method of calling banners. It does this on the zones screen.

If you are using flash it also possible that the actualy flash file is what is causing things to slow up.

It really all depends... it could also be server resource related

using sql server or access.. ? etc etc

all important details

Just as an FYI, I found the problem.  FP2003 has an "Optimize" feature that removes so called not needed spaces and comments from the pages.  It also completely screws up .ASP code.

I turned off the optimization feature and all the pages I was having problems with worked.  However, I would still recommend not using it too!

import/export feature WARNING !!

I just want to warn everyone that the built in import/export feature can be a little dangerous.
The reason being is when you import users they get new "Users_ID"s in the database.

The "User_ID" field is an autonumber field and that is why and there is nothing you can do about it.

So, if you are using a user's current "User_ID" to keep track up something important NEVER export the users and re-import them. Because their "User_ID" will change and you will be in trouble.

The PayPal signup features of ASPProtect actually use the "User_ID" like this and that is the main reason this warning is here.

now, that being said

If you are importing new users into ASPProtect

or

simply exporting existing users to another system

then this is nothing to worry about.


Basically, the moral of this story is dont think of the built in Import/Export feature as backup system because it is not. It is not a substistute for backing up your database.

It is a just a tool that can come in handy for various things.

I'm all set - after thinking about your replies - i checked a bit more and changed the email component type -- thanks again for all your help.

so use the connection string the readme.txt in the sql installation folder file tells you to... it has the correct username.. I just posted that info above

or change the username in the connection string so its rigfht

or go into sql and give any user you want access to the database and use them

Any connection strings that come in the datacon_inc.asp file the way it ships are examples. We fully expect people to edit them.

Also.. the SQL scripts primarly goal is give you a properly set up database with correct files and table settings. Users and permissions often need a little extra attention from the installer as that part doesn't always get set right by the scripts It really all depends on what sql user you are when you execute the scripts. Many times the user someone logs in with doesn't have permission to make users and set permissions.

when you get back to work.. your   "redirect.asp" needs the password include file at the top of it.. or that wont work either..

and of course those pages you send people to all need to be repaired

check the action for the button in the code... its probably not posting back the the right page which should the same page it is...

I bet ya it is posting to guestbook2 which is the wrong directory... an old mistake I forgot to correct...

You would set the groups during users signup the same way you would do the expiration in the following example.

http://support.cjwsoft.com/code/moreinfo170-1.htm

The groups field need to be set the exact same way it would look like in the database of course

So, if a user was part of groups 1, and 2

You would look in the database and see this in the groups fields for that user

*1*,*2*

so in the signup code you set that like so

CmdAddUser.Fields("Groups") = "*1*,*2*"

This info only applies to resgitrations and signups using the "users" folder.
if you wanted to make different sceanrios you would need to carefully make a copy of the users folder and adjust it accordingly

You not getting a blank page.. you getting an error. You just can't see it because it appears you edited the page background to black.

error '80040211'

/aspprotect/scripts/emailing_subs_inc.asp, line 174

Dear Support Team

I have read and Installed your v8 banner software

exactly as explained on XP pro which contains other asp working app.

I have problems with the " Application " and " Session" in your scripts

things that make the iis fall dead.

also in the file asp _unlimited_config.asp

you have exlained that every thing must be kept without the "" marks.

well i get http 500 error cause of it.

Please advise

Thanks

Ran

yeah.. thats an old graphic probably only seen in a few places.

it is not on the main site
http://www.cjwsoft.com/
or here
http://www.aspprotect.com/
or here
http://www.aspbanner.com/
or here
http://www.aspclassifieds.com/
or here
http://www.aspphotogallery.com/

but I am sure there are a couple of pages left over still using it like the aspvendor and asplistings pages.. etc    I am aware of it, just been too busy to go change them and I didn't consider it a big deal

2003 servers are NT based anyway

Just installed software,  when I attempt to log on I get the following error (actually this is after I moved some of the include files to user).

Active Server Pages error 'ASP 0131'

Disallowed Parent Path

/gallery_admin/default.asp, line 25

The Include file '../dataconn_inc.asp' cannot contain '..' to indicate the parent directory.

What do I need to do to fix?

thanks.

We want to insert a hyperlink i the mesage area when we e-mail users from the Password Admin area.  Is ther an easy way to insert the hyperlink so when the user gets the e-mail, they can just click on it and go the the page we want them to?

Thanks,

Andy

False alarm. Dumb user alert (both the classifieds customer and me).

When I test fixes, I need to be looking at the right Ad_ID to get correct results

That being said, ASPIN has a lot of problems with anonymous reviews so if you can please sign up with them and post an Authentic review as they carry a lot more weight. Authentic reviews involve responding to their validation email so when doing so use a real email address that you regularly check.

And sorry I made you use the forums, but as you can see this is exactly the sort of thread that will help someone else later on.. and that is why I require people to use the forums now instead of just email support. That way the conversations are out in the open where they can help everyone instead of buried in my outlook where no one will ever see them. And of course if information is sensitive you can always do a Private Message as you did earlier.

It is all about creating a knowlegebase of valuable information.