ahh, I see..

that is not really something you should change.. it is pretty much always going to say read for any folder

It's hard to say, but adjusting settings like that could inadvertently change folder permissions in a way that could cause problems and be hard to correct. I really don't know that for sure but it is very easy to totally mess up permissions when trying different things. In the past I had to reinstall iis just to get things back to normal. I eventually over time learned what to do and what not to do and have never had a problem since. I am not saying you are one of those people but a lot of people have problems because they play around with things they shouldn't or they go nuts trying to give every account permission starting from root folders... overwriting important default permissions instead of just making changes to a few specific folders.. not understanding the importance of what they are doing..... etc etc

Sometimes you practically have to be a NT expert just to fully understand permissions. I know a lot and I can handle my own server but it's hard to explain the low level basic of NT permissions to others as there is a lot to it under the scenes. A lot of hard core NT/2000 users do all the permissions from the command prompt because there is a lot more control at that level.

Like I said earlier, what you showed me looks right but this isn't a complex issue and the error means what it means. Something isn't right with the permissions.

I would start from scratch if I were you. Perhaps consider doing an install in a new web instead of in your root like you showed me. Or try installing it on another machine for troubeshooting sake.

I am sorry I can't think of some amazing answer on this one, but I think this is just one of those weird situations that requires starting from scratch or trying it on another machine.

You might just learn something and actually get your project finished before 2010

your over there hacking away on your virus infested WaReZ machine

LOL thanks for the good laugh-- i guess its time to do some reading and making my own mods to the program..

btw i never insulted cafrepress.. not sure where you got that from- just advised that what they have is exactly what i want to have done. How much for your service?

Hi,

I have just one quick question, I know this works with Paypal but does this work with Merchant Account?

How difficult it is to make it workable with Merchant account? I appreciate your answer.

Thanks.

Chris,

Another question on V7.  I set up all the paths as required for the extras like user pics and exports on my site.  They were working fine.  I created an export, then as you recommend, deleted the file on the site to ensure it doesn't get in the wrong hands.  I did this a few times to test it after a number of people logged in.

About 2 days later, I went to do it again and the system came back with an error saying the directory didn't exist.  I know it did because I created it and it worked fine.  I then created the directory again thinking I was losing it.

Then today, I went to do another export and the directory is gone again!  Can you help me understand why this might be happening?  I am the only one with FTP access to the site so there is no way that it could be someone else doing it.  The error I get is:

Microsoft VBScript runtime error '800a004c'

Path not found

/password_admin/export.asp, line 78

Thanks,
Dave

Hello,

If you are using ASPProtect Version 7 it is possible because version 7 supports html emailing. In any other version it would require some custom coding to add html email support. You would have to sort it out by experimenting and editing the emailing code. All the email methods have documentation on the web in some form or another showing how to send html emails.

Also,
sometimes depending on the email component being used and the email client reading the email a link in a text based email will get hyperlinked automatically. For example outlook usually will do that, but it doesn't always in other situations.

Lastly, we have special upgrade pricing should anyone want to upgrade to ASPProtect Version 7. It really has a ton of great features.

Best Regards,

Chris Williams
www.CJWSoft.com

For some odd reason, the the export path has two backslashes (\\) at the end, thus generating an error each time I try to export. For example

C:\path\website\protect\data\export\\

This appears toward the bottom of the import_export_manager.asp page and is called by =ExportDirectory.

I checked under settings tab, no path ends with a "\". Any idea where else I need to look?

Nick

Hi-

Thanks for the quick response to my previous posts.

This is my issue:

I have read over all the docs and installation instructions and can't find a way to do this:

my default page in my root dir will be a log in page which will take the user once his level is validated to a "home page". Is there a page in your examples that will perform the function of this log in page? or should I rename check_user_inc.asp as the default and change it's html output to make it look like my log in page?

I also looked within the code for check_user_inc.asp and did not see where to specify where the user will go once he signs in.

Your help is appreciated

I just installed the software, but I can't find any place where I can see when users logged in, can someone please tell me where I can do this?

Thanks

in that file "upload_post.asp"

change

<%
If Session("Admin") <> "True"
 Response.End
End If
%>

to

<%
If Session("Admin") <> "True" Then
 Response.End
End If
%>

Just an update,,,

the permission were all correct.... i left it and tried from my pc at work and it works fine... so i dont know what hahhpened.... thansk for your quick response

regards

Domenic

Sydney, Australia

Christopher,

Thanks for the reply. I think I've found my problem, but can't test until later in the evening as it is on a live site.

Darrell

If you would like me to, I also have no problem going into your machine real quick via remote access and setting permissions / putting the right connecting string in there for you.

I need to go in as an administator though to set the permissions.

I had not rebooted after installing the Jet driver updates, so I tried that and the asptest page worked fine, and said that all the tests were successful and that the data connection was setup correctly. I then installed aspprotect again, but with the same results. I cannot log-in from the get_me_in.asp page. It still says that it is opening the page, but does not respons for an indefinite period. The asptest page is in the same directory.

I have looked for alternate databases for this product on your site, but I cannot seem to find them.

Perfect. Thanks buddy :)

I am confused.

Humm, how did ASPBanner 8 come with your purchase of ASPProtect ? That is not something I am aware of or something I do. Please provide more information on how you obtained ASPBanner 8. If I gave yu a copy for some reason please refresh my memory so I can go look up th emails about it. I need to know you have a valid license.

Now, as for the two not working together and the login screens messing with each other. I am even more confused. Tell me more as I just do not understand what you did ? ASPBanner has it's own user database and login system so there is no reason you should be mixing the two together as far as logins go. The two applications can certainly be in the same web together and not bother each other. ASPBanner can certainly serve banners to any pages you protect with ASPProtect or don't protect, but you certainly should not be protecting any ASPBanner code with ASPProtect code.  ASPBanner already has code in it to do that. If that is the case don't do that. ASPProtect is not meant to protect code that already has a login system. That should just be obvious as far as I am concerned and hopefully you dintn't try to do that.

(you said you just put the directory in there but there must be more too this than that)

But again, tell me more. I can't really know everything  ??

I just dont see how your ASPProtect pages could be effected by ASPBanner unless you really did something wacky like included the ASPBanner "check_user_inc.asp" instead of the one that comes with ASPProtect or overwrote it... etc ect

If in the same web aspprotect can be wherever and aspbanner needs to be in a folder called "aspbanner". There should be no conflicts under normal use and the two will essentially run seperate of one another.

Thanks for that. The upload size is just as effective and possibly a better solution to maintain server space.

What about individual gallery permissions. So only 1 member can post in only 1 gallery. I have a forum of 500 plus members so if they want to add a gallery than setting a permission would be idea for each gallery.

Permissions and Folder Locations

By default and to keep things clean we store everything in folder called "data"

That folder then has it in 4 sub folders

database (where the .mdb and temporary .ldb files are handled)
export (where the aspprotect export files are saved)
logfiles (where the aspprotect logfiles are saved)
user_pics (where the user pictures are saved)

Doing it this way makes it very easy for a system administrator to right click on one folder and set permissions for that folder and all of it's child folders.

Now, that being said.. you do not have to use these folders.

For example if you already have a folder in your web with modify permissions for the anonymous webserver account then you can use that one folder to store all of the 4 things above.

You'd simply edit your data connection string to point to that folder and then edit the other paths in the settings area of ASPProtect.

We did it that way so you would have options in case your hosting company was being difficult with your ASP hosting needs.

that wont work the way you did it because groups are not stored like like.

groups are stored "*1*"
or "*1*,*9,*"

so if you test for them you must do so using the InStr function of vbscript

example:

If InStr(Session("Groups"),"*1*") Then
    ' do whatever
End If

also.. as for the session variable
it should be    Session("Groups")

And in Version 6.... (its all ready to go in version 7) that session variable must be saved in the check_user_inc.asp file near where all the others are saved. If it is not there by default "I dont remember if it is or not" you have to add it like so near where all the others are saved

Session("Groups") = CmdCheckUser("Groups")

If you are wondering if it is being saved correctly you can always response.write out the Session("Groups") to see if it holds a value

Microsoft VBScript compilation error '800a0411'

Name redefined

/aspprotect/config_inc.asp, line 15

Dim  Address_Required,CDONTS_Installed,City_Required,Registration _Type,VerifyURL,Log_Off_Page
----^

To hopefully wrap this thread up...

This user showed me his site and things were working for me as they should.

We came to the conlusion that the weird behavior he was experiencing was because he was using AutoComplete in Internet Explorer....

It was automatically filling in the fields with his username/password that he had autocomplete save.

So it was a web browser usage issue.. not the code.

so, on control_pics.asp where you see

<% =TempDesc %>

you could try doing this instead

<% =Replace(TempDesc,"&nbsp","") %>

I believe I'm having trouble with Domain masking in that it appears to affect the ASP Photo Gallery login screen.

My address is forwarded and masked by my domain "company" (in this case: Godaddy.com). It is forwarded to a Win2000 Server running at my static home IP.

From outside of my network, the website appears to work fine...even the default.asp page works to the point of the login page. After entering a login and password - you hit the login button and the page simply reloads only with all of the header and footer information removed.

I found that by eliminating the domain masking feature at the domain company, the problem gets eliminated and the entrie site works fine.

Has anyone else run into this problem? I'm guessing it's the way the domain name is held in the browser cache but I'm not sure how to resolve it so that the ASPPhotoGallery scripts and pointers work correctly.

Eric

The ASP error on the home page has been solved -There was aproblem with the path that was including the home page file and we fixed it.

However the error on the member page remains - any ideas/suggestions would be appreciated. This is the error:

Microsoft OLE DB Provider for ODBC Drivers error '80004005'

[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for

process 0x748 Thread 0xad8 DBC 0x214734c Jet'.

/aspboard/forum/global.asp, line 15

that's they way it should be done..

the only other thing would have been to test everything with sql before trying to import any data.. and make sure all was fine at that stage




more info on the errors would be helpful.

Id' also carefully visually compare the SQL tables and fields with the SQL scripts and make sure all field types and settings got set correctly.

Also, make sure the user accessign the database has datareader and datawriter permissions of course.

Thanks for the info.  We'll do as you suggest.

NPA

I purchased the ASPGallery Pro last week and still cannot get it running. When I enter www.vickerylightning.com/aspgallery/dataconn_inc.asp on the screen it says "Not a valid bookmark"

Below is the connection string. My hosting company uses server map paths:

'Create database connection

'Create a connection odject
Set adoCon = Server.CreateObject("ADODB.Connection")

'Database connection info and driver
'strCon = "DRIVER={Microsoft Access Driver (*.mdb)}; DBQ=" & Server.MapPath("aspgallery_access2002.mdb")

'Alternative drivers faster than the generic access one above
'strCon = "Provider=Microsoft.Jet.OLEDB.3.51; Data Source=" & Server.MapPath("aspgallery_access97.mdb") 'This one is if you use Access 97
'strCon = "Provider=Microsoft.Jet.OLEDB.4.0; Data Source=" & Server.MapPath("aspgallery_access2000.mdb") 'This one is for Access 2000/2002
GalleryConnectionString = "Provider=Microsoft.Jet.OLEDB.4.0; Jet OLEDB:Database Password=temp; Data Source=\\NAWINFS04\home\users\web\b2623\rh.vickery2004\aspga llery\aspgallery_access2002.mdb; "
GalleryDatabaseType = "MSACCESS"

adoCon.ConnectionString = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source="&Server.MapPath ("\aspgallery\aspgallery_access2002.mdb") & ";"

Definitely need some assistance!

Rhona (rookie asp) -

I have been able to successfully edit some text colors, but there seems to be one page that wont change the text color. Inside the users/ folder, the login.asp page, i cant seem to change the text color from ffffff to 000000 so it can be read on my background color. Every page in the script is correct but this one.

Thanks.

I think I've found the problem..

The password "abcdefgh" works

The password "abcdefghi" does not

(username "ace45")

Passwords can obviously only contain up to and including 8 characters... By some coincidence I only used short passwords with MS Access.

I really do not know.. maybe it is a conflict with something else..

I run many instances of aspbanner on my servers and I have every item to log enabled for my iis log files... my stats server software which reads those log files (livestats and smarterstats) have never reported any 404 errors related to (aspbanner/those images)...

I do not know what is happening in your situation..

sorry.

Hello,

I do not really understand what you mean?
There are no country and city lists in ASPClassifieds.