ya, that firewall could mess that up.

just edit which ever style include you are using
(with a text editor)

it will be one of these depending on your settings.. and they are located in the "scripts" directory

view_album_style1_inc.asp
view_album_style2_inc.asp
view_album_style3_inc.asp

find this section of code and remove the part in red


If Last_Counter_IP <> Request.ServerVariables("REMOTE_ADDR") Then
 
 Set CmdUpdateCounter = Server.CreateObject("ADODB.Recordset")
 cmdTemp.CommandText = "SELECT " & tbl_label_albums & ".* FROM " & tbl_label_albums & " WHERE (Album_ID = " & Album_ID & ")"
 cmdTemp.CommandType = 1
 Set cmdTemp.ActiveConnection = ConnGallery
 CmdUpdateCounter.Open cmdTemp, , 1, 3
 
 CmdUpdateCounter.Fields("Album_Counter") = (Album_Counter + 1)
 CmdUpdateCounter.Fields("Last_Counter_IP") = Request.ServerVariables("REMOTE_ADDR")
 
 CmdUpdateCounter.Update
 CmdUpdateCounter.Close
 
 Album_Counter = Album_Counter + 1
 
End If

The company that hosts our business web site has been impossible to deal with in assisting me in getting asp protect to work. Getting the rights set correctly took 6 days and then getting parent paths enabled has been impossible. There last response was simply this:

The includes were changed so that if your server does not support "parent paths"
' and the "../" that you could easily change a few files like this and make the
' includes virtual includes instead of file includes. We didnt make them virtual
' includes by default because depending on where in your site you put the application
' the virtual include path would be different. They are also much different on a local
' development server than they would be on your real server
'
' Here are some examples of what you might change these includes to
'
' If you put the aspprotect folder in the root of your domain at your server
' example: www.mydomain.com/aspprotect
' then you would probably use
'
' #INCLUDE VIRTUAL="/aspprotect/dataconn_inc.asp"
' #INCLUDE VIRTUAL="/aspprotect/config_inc.asp"
' #INCLUDE VIRTUAL="/aspprotect/scripts/emailing_subs_inc.asp"
'
' Or if you didnt use the aspprotect folder and just put the contents of it in the root
' of your domain
' then you would probably use
'
' #INCLUDE VIRTUAL="/dataconn_inc.asp"
' #INCLUDE VIRTUAL="/config_inc.asp"
' #INCLUDE VIRTUAL="/scripts/emailing_subs_inc.asp"
'
' It really all depends on what works for your situation
' If you want more information on server side includes read this article at PowerASP
'
' http://www.powerasp.com/content/code-snippets/includes.asp

I am assuming that they will not enable parent paths and I need to modify some code. I do not know asp. WHere do I modify the code for a server that will not enable parent paths?

Thanks,

D

Hi-

Thanks for the quick response to my previous posts.

This is my issue:

I have read over all the docs and installation instructions and can't find a way to do this:

my default page in my root dir will be a log in page which will take the user once his level is validated to a "home page". Is there a page in your examples that will perform the function of this log in page? or should I rename check_user_inc.asp as the default and change it's html output to make it look like my log in page?

I also looked within the code for check_user_inc.asp and did not see where to specify where the user will go once he signs in.

Your help is appreciated

recent activity infomation is temporary and mantains itself per application start up.. when the web application restarts for whatever reason the info is reset

a reboot, an iisreset on the server, application pool restarts, etc etc
this is done because if that info was saved in the database your database would get huge real quick

logfiles however do not do that and are permanent

humm, I dont know then..

If you want PM me your site info and I will go in and troubleshoot.

Frontpage or frontpage access, either way

and also the site URL

Ok time for some more questions!!!

Is there a way to make the person's email address their default username... or force it in somehow instead of allowing them to create their own?

you not seeing the real error

http://support.cjwsoft.com/forum/forum_posts.asp?TID=11& PN=1

cool.. let see if that works.  This was the command line that I had to enter in order for it to register.  Chris, as you stated before, you can try one of the other emailers, but you need a email server to tie to. 

"regsvr32 cdonts.dll"

ok, here is what is going on

you are password protecting an ".asp" page that requires querystring info to run correctly   (example - "somepage.asp?ID=3"")

that is something I never intended anyone to do.. while it does handle and repass the querystring info along during successful login it does not re-pass that info during a failed login as you have found out

this is all by design.. the only reason the system re-passes the querystring info at all is because I wanted to make it smart for the sake of the remember me/cookie feature.. so if someone was using that and bookmarked a page deep in your site with querstring info...then when they went back to that bookmark they would get authenticated and still see the page as intended with the querystring info in tact

it was a nice feature never intended to handle any situations other than what I just described...

now...
notice the url in the browser after failing a login.. then logging in successfully.. it is missing the querystring info

that more than anything is what is going on..  browser caching can cause some confusion when dealing with this because the browser likes to return you to the page minus the querstring info... when that happens a simple browser refresh at that time may very well solve the problem and then you see the page you are supposed to see...

To avoid all of this...

One solution to this is to always start people logging in to an ".asp" page that has no querystring info. That way this won't happen. Once they are logged in you can then offer them links to the pages they need to go to. (you of course still want to password protect those pages)

Another solution is to log them into a page with no querystring info and then do a response.redirect to the page with quersytring info.. thus accomplishing the same thing but without the possibility of the issue because of a failed login.

Another solutions is to do checks in your asp page for missing querstring info.. and if it isn't there do something about it like send them somewhere else.. or display a message about there being an error... etc etc

So,basically you don't want to tell people to login into such and such page with querstring info... and providing a username and password..... You can do it but like you found out it can cause an error if they mess up logging in the 1st time. The system just was not designed to handle that. There are complex reasons for that involving security that would just take me too long to explain.

I hope this makes some sense to you.. it is very hard to try and explain

IMPORTANT UPDATE - READ THIS
http://support.cjwsoft.com/forum/forum_posts.asp?TID=205& ; ; ; ; ; ; ; ; ; ; ;PN=1

The 2Checkout Support Pack which is built in to ASPProtect 7 contains all the pre-built scripts you need to implement 2Checkout Payments with ASPProtect. You must be using version 2 of the 2checkout system. They are phasing out version 1 regardless so everyone will be using version 2 very soon if they are not already.

THIS IS NOT INTENDED OR DESIGNED TO USE 2CHECKOUT SUBSCRIPTIONS. (see bottom of this thread for more info on that)

This Support Pack basically gives you an additional signup and registration directory "2checkout_signup" and it should not interfere with any changes or customizations you have made to your ASPProtect setup in general. New users can register in this directory and pay for membership at the same time. Existing users whether active or expired can be sent to this directory where they can lookup their account and buy additional membership time online. You can also assign various Access and Group Levels during signup and you can set up various prices for various amounts of time as well. This is a real-time setup for the most part. As soon as a user pays via 2Checkout your system is updated and they will have access.

The 2checkout pack is NEW.. and was released on March 19, 2005. If you don't have it and would like it please just ask.

To start using this edit the "2checkout_signup/2checkout_config_inc.asp" file

You will be entering your 2Checkout Account number in that file as well as the URL you want a user to go to after payment. It is all commented in that file. (There is also a testing variable you can set to True if you want to do testing without real charges being applied)

After editing that file run this page.

http://www.mysite.com/2checkout_signup/show_postback_path.asp

Replacing the part in blue with your website info.

It will report back that postback url you need to use in the 2checkout system.

Log into your 2checkout version 2 account and under the "look & feel section" enter that postback url for both the "Approved URL" and the  "Pending URL"

Trust me: You want the URL there for a pending URL because the 2Checkout system is quite random and 95% of the payments that come in go to the pending URL and end up being legitimate sales. (at least for me they do)

Now make sure the Direct Return option on that page is on as well. 

If set to Yes buyers will be immediately directed to your URLs below once they click the Complete Order button. If set to No the buyers will have to click a button to return to your URLs below.

Save that page... and leave 2checkout.

Now, delete this page from your ASPProtect setup.
http://www.mysite.com/2checkout_signup/show_postback_path.asp

It's a minor security risk and is no longer needed needed.

The basic setup is finished. All you have to now is set up payments options the way you want them.


Changing Payment Options

In the "2checkout1.asp" file there are form options set up.

They look like this and you can have as many as you like.

<option selected value="30,9.95,3,">30 Days, 9.95</option>

In this option... A user has the option to purchase 30 days for $9.95 and he will be set to Access Level 3 when payment in completed.

Here is how it works.

The value setting (red) is essentially and array that can be made up 4 elements separated by comma's
They must be separated by a comma and there can be no spaces. In this example the 4th value was not used but the last comma must still be there. If you didn't want to set an access level and left out the "3" there would 2 commas at the end.  etc etc
Basically there must always be 3 commas but you only have to set the 1st 2 values which are days and price.

days,price,access level,groups

The 1st value is the amount of days.
The 2nd value is the price for the amount of days.
The 3rd value is the access level you want to user assigned to.
The 4th option is the groups you want the user assigned to. (see PayPal subscription thread for examples of specifying group info)

Now, the label for the option in (blue) can say whatever you like.

ok.. so we got an NT server with a 486 with 256 meg of ram. 

hehe  sorry

anyway.. I have the system running without doing any importing and WOW is it chugging.. I mean it takes a while even to edit/save a user

good news is the filesystem object works as I wrote to a text file

this may end up being a simple case of lack of horsepower..

we may need to do the importing on a faster system and then take the database over cause everthing I see on your server looks correct

even so aspprotect is running so slow.. I have never seen it chug like this

I even tried connecting to a 2000 version of the database and no difference.

I am not totally sure what is going on but the server resources available are scaring me... however this could be something new in the code that I never got a chance to try on NT server.. I dont think so though

how does your other stuff run ?

static pages that do not access a database seem to serve up quickly.

are you running any other dynamic code ?

Same here.  Thinking it might be server load or the bandwidth to the server.

Thanks for checking!
Lance

it is by design actually and something that can be improved
(I just never thought of it when I 1st designed the system and it is actually planned to be added in Version 8)

The trick would be to reset those session variables anytime someone edits and saves their information... not very hard at all

you would do it on the save code page for when a user edits themself.
you want to grab the info posted from the form and  reset each session variable at the same time everything is re-saved to the database

example

Session("Company_Name") = Request("Company_Name")

New question...

When someone edits their personal information, such as address, is there any way to set it so that someone in the office can receive an e-mail noting the changes?

Thanks.

Our knowledge base which is hosted at a remote location is protected by ASPProtect Full Version 6. I would like to allow our employee to access the knowledge base from within our internal network unchallenged. Is there a way which I can modify the code "check_user_inc.asp" to allow any one coming from say 10.1.X.X to access the site unchallenged?

Thanks,

Mo

Thanks for that.

I have tried InStr("*2*",>"0") in the query design window but it does not return any members.  

I have orded a Access Bible to help me in furture

I encountered a problem that I haven't been able to solve. I'm trying to get .pdf files to byte serve (page-by-page load in the browser) but unable to do so. I've narrowed it down to stream download file where it creates the header object. I haven't made any success with the changes I've tried. Any help would be very nice.

This maybe useful:
http://msdn.microsoft.com/library/default.asp?url=/library/e n-us/act/htm/actml_ref_href.asp

I appreciate the offer to beta test... but its really more a matter of me getting it ready..

I have a lot done.. but a lot of things are hard coded to only work on my machine and some things have not been sorted out. Giving it to someone else to test would be a waste of time at this point as I they probably couldn’t even run it.

Lately the reason this project has fallen behind has all to do with my main webserver where I collocate.

1st it got compromised (we think by certain competitors who are always up to no good)... then windows 2003 server which I decided to go with on the new server gave me random problems... then the Cisco hardware firewall was acting up and making the sites run slow....then SQL server attacks on port 1433 from Korea when I took the firewall down....and as of the last few days I think the server just needs a new power supply. I swear for the last 2 months I have spent more time administrating my servers than working on code. Yesterday it was locking up every 30 minutes. There have been a lot of days like that and it takes up all my time until I get it situated.  Especially since its over 100 miles to the collocation center. The APC unit I installed that allows me to remotely cut the power to hard reboot is a life saver.

Fun... I tell ya... and expensive.. (hardware, software, lost sales, and time) I am pretty much completely broke at the moment. It has been a very expensive few months.

But I like running my own servers... I run dns servers, email servers, sql servers, web servers.. I do it all. It's keeps me in touch with the latest software/hardware. Regardless , my servers ran well for years and they will again.


anyway.. hopefully I can actually get a new version of the photo gallery out before the month is over. It will probably be the last classic asp version. The version after that will most likely be ASP.net.

I am using cdont to send email. what do i have to do send email to other display my full name instead  of email address. In other word I want to see first name last name  in their email client instead of email address.

thanks for your help

humm.. can I possibly see this happening ?
any changes to that part of the code ?

The only reason no one else asked this many questions is possibly because they didnt NEED the functions i am TRYING to do.

We offer tech support for installation of the base application purchased in it's native form.  In other words were not planning on spending weeks holding your hand and teaching you how to build your application or modify the one you bought. Not because anyone wants to make it hard on you but because there is a practically infinite number of things someone could be trying to do and the only way to give you the exact answer would pretty much involve either writing it for you or having a look at your code to see what the heck your doing. Sorry but my time isn’t cheap nor do I have a lot to spare. I already gave you my approach on what to do and what you should be looking at but obviously you’re not catching on. SO ONCE AGAIN, PLEASE LOOK AT THE SOURCE CODE AND DECIDE HOW YOU WANT TO HANDLE YOUR END OF THINGS BASED ON HOW THE APP DOES ITS THING. I really don’t know how I can be more clear that that. I don’t have a crystal ball that can tell me where you’re going with your own code, what the final requirements are... what field you want to add or remove for the database etc. There is a demo up that everyone can look at and play with so they can get a feel for how the things behave and look. It’s not my fault your naivety led you to believe you could do anything with it in ten seconds. I mean if I just add some wings to my car maybe it will fly, and if you just add a shopping cart and a few products maybe you can start your own Amazon.com with that software right? Sounds good to me…

It would take me longer to re-write YOUR code than it would to have LEARNED ASP.NET and made MY OWN.

Well thats one thing we both agree on, I bet it would take you a long time to rewrite the code when you dont know how to write it in the first place. By you own admission you dont know enough about what your doing to be messing with a .NET app at this point. Maybe you should take your own advice and LEARN SOMETHING ABOUT IT. What’s even worse is that application isnt even complicated, its 101 stuff honestly. One class, thats it! Your not looking at thousands and thousands of them that you will have to read and comprehend. If you can actually “read” the code we kept it lean and mean and to the point. Nothing strange or random, no references to a zillion things all sprinkled here and there. Its reads like a book if you know the language. That’s why developers buy these apps all the time. Not because they couldn’t write one themselves, but because they know their time is valuable as well and for $150 which is less than most get paid an hour they couldn’t be bothered. Furthermore we both spend a lot of time making sure these apps are "dumbed down" so that the average programmer without a lot of object oriented background can pick up the coding style tweak it if they need to. Some people do modify things to suite their needs and others are happy with our apps "as is".

Just to recap we already wasted two days yappin about your jacked up servers and after you went through THREE of them and finally got one working you said the code was working. Red lights started flashing in my office by the time you got to the second screwed up machine, but hey weird things happen so at that point I wasn’t 100% concerned. Technically we could have and possible should have cut you off there as the policy in place is pretty clear about us not being your tech support crew when it comes to getting your machine working properly (especially one we cant even look at). Go check those posts again both Chris and I were answering your questions and being as helpful as anyone could possibly expect.

Several more days have been spent answering questions about how to modify your application and again that’s not our responsibility and we don’t support modified versions of the software for all the reasons that should be obvious. No software company does and if I have to explain why that is well this conversation is beyond hope.

Bottom line is the responsibility to support that application ends the moment you get it running the way it was shipped. Were pretty damn decent about going above and beyond and a lot of the time we go into things we shouldn’t have to. If you have well thought out and specific questions by all means ask, this isn’t some sort of thanks for your money now get lost operation. CJWSoft has been around since the beginning of Microsoft’s entrance into the web application market. We have thousands and thousands of happy customers because we are developers and enjoy working with other developers along the way.

You’re not the first N0oB to show up, but you’re the first one I can think of that ever tried to tell us we didn’t write the apps we sell and essentially wanted to argue that we don’t know what were talking about. Meanwhile you should have been done with your thing days and days and days ago, not in here yapping off and showing your ignorance to the other developers that regularly browse these forums. You trying to tell me how CafePress works is a joke, I happened to have been part of the team that worked on the first few revisions of that site and again you really didn’t even understand what I was getting at in that last post. LINK TO LOGIN PAGE not link to every protected page on the site.

If you think I am pissed off at you, your wrong. I'm just irritated with the whining about this and that and rather than admit your over your head you come back with half baked remarks that only make sense to you. If you think you can google a few terms and come back here talking smack like you’re actually someone that knows what you’re talking about your just making a fool of yourself. You sound like a guy from China trying to tell me how to speak English... My advice is get a few books and start learning or try actually reading up and listening to the other bazillion knowledgeable developers out there that do a great job posting articles about the subject. You might just learn something and actually get your project finished before 2010 and when you do please come back and re-read your posts with "enlightened eyes" so you can see what a goofball you are for saying half of the things you have said. I am not in the mood to keep helping you get your project done step by step. I have huge projects of my own going on and if I thought you could actually provide a descent project specification I might offer to make the changes for you at a serious discount so you could go away and everyone would be happy. Problem is I dont get the feeling you could explain your way out of a paper bag let alone provide a group of programmer the techinal specs for your project.

Your best bet is to post a link to the start of this thread at www.AngryCoder.com I'm sure a  few of  people over there would be more than willing to give you a ton of usefull advice

Google 4GuysFromRolla… a great resource site with example, just dont come back here  telling me those guys/ladies posted things that dont work either.

Chris has written hundreds of articles on PowerASP, a great place to start looking as well… www.powerasp.com I've been spitting out code for longer than I can remeber and I still look thing up on this site because its LOADED with great info. That happens to be one of the very first ASP sites that went up on the net so lets just say he knows a bit or two about the subject.

I'm sure your frusturated but your pushing your luck seriously. 38 posts about this subject in a week and your over there hacking away on your virus infested WaReZ machine which isnt exactally the ideal development rig. I mean we provide the code and your supposed to provide at the least a very basic knowlege of what your doing and a production grade platform to test it out on. To me thats like buying a car and then asking how to drive it... then bugging the dealer to teach you and when you smash the thing complaining because no one told you that your not supposed to drive into a wall. I have the same policy as the dealer, show me something wrong with the car from the factory and we will fix it for you NO QUESTIONS at all with our appoligies, but really once you take it off the lot what you do with it is your deal and its not our responsability in the least.

No I didn't...

The one I tried is the hosted one at my provider which I gave you the link for.

Thanks very much.  I will get that one and it may be much easier if I need to get into the Nitty Gritty of the database at some time.

Thanks

http://gibsoncity.info/guestbook/default.asp

Reports 65-messages, however after the first 10 are displayed and you click on the More Messages button, I get the Page cannot be found error.

Ok i was wanting to know what the "if then" statement would be if i wanted to show xxx if your group is xxx.

I tried

    <% If Session("Groups") = "1" then%>
    <font size="2">TEXT HERE</font>
    <%end if%>

But that did not seem to work.

Hi,

I have just one quick question, I know this works with Paypal but does this work with Merchant Account?

How difficult it is to make it workable with Merchant account? I appreciate your answer.

Thanks.

Weird

that wont work the way you did it because groups are not stored like like.

groups are stored "*1*"
or "*1*,*9,*"

so if you test for them you must do so using the InStr function of vbscript

example:

If InStr(Session("Groups"),"*1*") Then
    ' do whatever
End If

also.. as for the session variable
it should be    Session("Groups")

And in Version 6.... (its all ready to go in version 7) that session variable must be saved in the check_user_inc.asp file near where all the others are saved. If it is not there by default "I dont remember if it is or not" you have to add it like so near where all the others are saved

Session("Groups") = CmdCheckUser("Groups")

If you are wondering if it is being saved correctly you can always response.write out the Session("Groups") to see if it holds a value

MSACCESS 2000

server: windows

option pack: yes (after the install I have this problems with groups and edit users )

host permissions: yes

MESSAGGE:
Active Server Pages error 'ASP0113' Script time out/password_admin/groups.asp The maximum amount of the time for a script to execute was exceeded. ...

Chris,

Another question on V7.  I set up all the paths as required for the extras like user pics and exports on my site.  They were working fine.  I created an export, then as you recommend, deleted the file on the site to ensure it doesn't get in the wrong hands.  I did this a few times to test it after a number of people logged in.

About 2 days later, I went to do it again and the system came back with an error saying the directory didn't exist.  I know it did because I created it and it worked fine.  I then created the directory again thinking I was losing it.

Then today, I went to do another export and the directory is gone again!  Can you help me understand why this might be happening?  I am the only one with FTP access to the site so there is no way that it could be someone else doing it.  The error I get is:

Microsoft VBScript runtime error '800a004c'

Path not found

/password_admin/export.asp, line 78

Thanks,
Dave

The way the application ships there are no password confirmation areas anywhere ? Please be more specific as to what you have done and if any mods are involved ?

If you are talking about one of the MODS please realize they are not supported. http://support.cjwsoft.com/code/moreinfo459-1.htm

Even though they are not supported I look them over pretty closely and I know of no issue like you mentioned so I would suggest re-downloading the MOD. Perhaps you got a corrupt download or file.

All this being said installing the desktop version of SQL may be a little tricky as it may complain that your SA account needs a strict password.

The solution is to run the SQL Desktop setup.exe with some parameters specifying a password for the SA account.

So you go to the command prompt or make a shortcut to the setup file and run something like this

setup.exe SAPWD="YourPassword"

minus the quotes...

I got that info from this article and it worked fine
http://www.experts-exchange.com/Databases/Q_21036508.html

The other thing to remember is it might take a reboot to actually see the SQL server icon running in the taskbar. You may also need to go into the administrative services and enable the "SQLSERVERAGENT" as well as set its startup type to "automatic"

And a reboot here and there..

Whammo... your in business...

You really can not do something like that. You can not use client side code to change a server side session variable.

To make changes server side a form must be submitted or a link clicked on to another page. Then you can do whatever you like but you cant have an onlci event update a session variable like that.

Though I am not sure of exactly what you are trying to do I think you'll need to go about things a little differently.