Hello,

VBScript is the most popular ASP scripting language, and has the most support available. I estimate that less than 5% of the ASP coders out there use anything other than vbscript

That being said it specifically says on the aspprotect site ASPProtect is only for use in protecting asp using "vbscript" as the language.

http://www.aspprotect.com/more_info_full_v7.asp

http://www.aspprotect.com/comparison.asp

it is something I specified very clearly for this very reason.

Sorry, but you can not use ASPProtect to protect pages using Language="Javascript". The code is too complex to be mixed with server side Javascript.

To password protect asp pages written using "Javascript" you really need a an application specifically written in and designed to work with ASP pages written using "Javascript". And then of course that application would not be able to protect ".asp" pages written using "vbscript." (I mean never say never, but it would be a ton of work to get both working and I doubt you will ever see a commercial application that does both)

as for switching back and forth between vbscript and javascript you really can't except with very simple code. Doing so with anything complex can be extremely problematic because the order of execution sometimes gets all mixed up because of the complexity of the code being used.

That doesn't mean it can not work....

You would really want to do something like this.


do not specify a default language at the top

surround the aspprotect include file with this

<SCRIPT Language="vbscript">

</script>

surround your javascript code with this

<SCRIPT Language="JavaScript">

</script>

then make sure none the code including the aspprotect include file has any <% or %> tags in it

that means you have to remove that sort of thing everywhere... that means a lot of work if you used a lot of that sort of thing instead of response.writes to write out html type stuff

and again... I don't know if you would ever get it all working

If you have found out that parent paths are disabled on the web server you can still use the application.

Before you continue.

If it is your server consider enabling parent paths to solve the problem.

If it is not your server consider asking them to enable parent paths for your web site to solve the problem.

If that is not possible please download this zip file.
2005-02-20_150703_aspprotect_v7.x_alternate_include_file_pat hs.zip

This zip file contains 3 sets of alternate files depending on your situation. You simply replace your existing aspprotect v7.x files with these new ones.

The zip file contains the following folders and files.

Below is the contents of the readme.txt file which explains everything.

The following folders each have a version of all the files in the ASPProtect system that might need to be edited in case you need to change the paths for the server side include files. There are 3 different scenarios.

(parent paths enabled) - This is the way the application comes.
The files in this folder have FILE server side includes containing "../" information. While these includes will work when the applicaion in is any location of a website they will not work if parent paths are disabled on the web server. Generally you will want to use these on your xp development machine. You can of course use them on your real server if parent paths are enabled. Parent Paths are now disabled on II6 by default and some hosting company will not enable them.

(domain root)
The files in this folder have VIRTUAL server side includes in them.
These includes only work when the applicaion is installed in the root of your web domain. For example if your domain was called "www.somedomain.com" the following aspprotect files and folders would end up like this
"http://www.somedomain.com/check_user_inc.asp"
"http://www.somedomain.com/password_admin"
"http://www.somedomain.com/users"

(domain directory)
The files in this folder have VIRTUAL server side includes in them.
These includes only work when the applicaion is installed in a directory called "aspprotect" in the root of your web domain. For example if your domain was called "www.somedomain.com" the
following aspprotect files and folders would end up like this
"http://www.somedomain.com/aspprotect/check_user_inc.asp"
"http://www.somedomain.com/aspprotect/password_admin"
"http://www.somedomain.com/aspprotect/users"
You can change the name of the "aspprotect" directory but you will will have to edit the includes in the files.

Lastly, if you are on a local machine and insist on using the VIRTUAL INCLUDES you would also use the (domain directory files) even though you dont have a domain on your local machine most likely
For example if your site was installed like so.
"http://localhost/aspprotect/check_user_inc.asp"
"http://localhost/aspprotect/password_admin"
"http://localhost/aspprotect/users"

I am brought to a logon page in which I cannot access the page.  This must be due to the check_user_inc.asp include.  Without the include I get a blank page.

And I'm the one who finds those rarities!   I'm not surprised. 

Oh well...this should be interesting trying to get an 80 year old man to change his password.

Thanks for your quick responses Chris.  This is still an awesome membership system!

Mick

I dont know. Perhaps a fresh installation in a new folder would be a good idea as well if possible..

for troubleshooting sake..

Hi, its just not something i can suppport as I do not support custmizations to the code epecially when dealing with an image component that is not supported by the application.

Sorry, its something you have to figure out. Bascially I would suggest looking at the existing asp image resizing code and using that as a guide.

Have you considered just buying a license of ASPImage and asking the host if they will install it after you purchase it. It sounds like it may save you a lot of time.

If you are ever looking for a good host for ASP. www.alentus.com is one of the best. There 9.95 plan gives you access to 3000.00 of commercial quaility asp components also which is nice.

Hello,

I have ASPprotect 7 installed on my remote server.  I am able to go to the examples/default.asp page and login in without any difficulties.  If I copy the code from that page and paste it in a new page called the same thing but in a different folder, I get this error;  (Keep in mind that this is essentially the same exact page in a different location of the website)

Error Type:
Active Server Pages, ASP 0126 (0x80004005)
The include file '../../check_user_inc.asp' was not found.
/aspprotect/Pages/default.asp, line 3

I get the same error if I paste the "protection code" I have generated into the top of a current (.asp) page in my site.

Basically, the only pages that work are the ones that came with the program as examples.  Thats great, but now I need to make it work for my pages.  Any thoughts?

Chris:

The string is being saved and I get a .wav ring sound to confirm.  I have tried editing in "notepad" and then running the "data/show_path_info.asp" file after with the same results.

Ken

Hi Chris,

I tried changing using Notepad in the config_inc.asp

from:

If  Application("SERVER_SOFTWARE") = "" Then
 Application("SERVER_SOFTWARE") = Request.ServerVariables("SERVER_SOFTWARE")
End If

To

Application("SERVER_SOFTWARE") = "iis/6"

and the albums still do not show up under the categories

Rhona (rookie)

I apologize if I've missed this, but I would love to see the ability to auto-e-mail the advertiser at some randomly set interval before the banner expires. Ideally, I would also be cc'd on this e-mail so I can stay in touch. If the advertiser wants to renew, I can receive payment and change the expiration date without their banner ever falling out of service.

Since e-mail is already built into the program, would it be difficult to add a routine that checks for expiring banners at some daily interval, and contacts the advertiser?

To get really fancy, the e-mail could include the ability for me to add a button for paypal, allowing the advertiser to easily click and send off another payment.

Best,

Wayne

I have been using this solution for over a year now and think its great, however I recently logged on to add a banner and when I clciked on the link that opens a window, displaying all the gifs in the directory../images/banners/, now images showed up, however they do exist in that directory.

I recently upgraded my computer and am now using windows XP...could that be the problem?

Thanks

Its not on their end. Using ASP alone you really won't be able to send more than around 300-400 individuals emails at a time before things will time out. Its just that ASP is not an efficient way of sending email and it never will be.

You really should look into worldcast like I mentioned before.
http://www.fairlogic.com/worldcast/

Then just export the email list from the database into worldcast and send out the newsletters.

You will get much better results and perfect newsletters and it really only takes a little bit longer to do each time once you figure it out. That is how I send out my PowerASP and CJWSoft newsletters and it works perfectly every time.

This issue came up once before and when I investigated I could find no error in the html that aspprotect generates and those files do exist where they are supposed to. We concluded it was a parsing error from the log file system.

There just really isn't anything I can do about it. I spent a week trying to figure it out. It is just the log parser screwing up under certain circumstances where there is no reason anything is wrong. They have trouble dealing with some of the complex URL/querystrings that the ASPProtect admin area uses. They think there is a 404 eror when there isn't... etc etc

Your going to have a lot of problems and a lot of the code will have to be re-written.

There are a lot of things in the the code that the MYSQL database system does not support or has issues with . I know because I once made a version of ASPBanner work with MYSQL and it took weeks of work to get it stable.

Null field types can cause problems... but mostly ADO updates which I don't think MYSQL supports at all. All of the ADO stuff would have have to be rewritten.. etc etc

That's probably why you cant get much of the code to write to the database.


Here is a generic example.

An update to an existing record using ADO
http://www.powerasp.com/content/database/ado_update.asp

And update to an existing record using an update query.
http://www.powerasp.com/content/database/using_update.asp

All through the the code the ADO updates would have to converted to update queries which means a lot of work.

I used ADO a lot because I like it and it is little easier to validate data before it is written to the database.

It is also a little easier for customers to understand when they look at the code.

Anyway....

The app just was not designed to work with MYSQL.
It was specifically designed to work with MSSQL and MSACCESS only.

This holds true for all of our applications.

Your running off an IIS 5 Server so I would suggest just using MSACCESS as the database. The Photo Gallery app will run very well using MSACCESS. 

Most likely it is no longer supported on the web server. The web host probably moved you site to a windows 2003 server which does not support cdonts or they stopped running the IIS SMTP server.

You usualy wont get an error..

it is also possible that cdonts is boned up as it is pretty flaky and that tends to happen. For example sometimes the emails it is suppost to send get caught up in the smtp pickup directory and never get sent out until the server is rebooted.

You should really ask the hosting company why cdonts has stopped working. It definetly has nothing to do with the code if it has been working all that time.  If CDONTS still is supportd tell them you emails are in limbo. Ask them to look and see if a bunch of ".eml" files are stuck in the stmp pickup directly and if so to please reboot the server.

lastly:
cdonts has been deprecated and now everyone uses cdosys.
see my article
http://www.powerasp.com/content/new/sending_email_cdosys.asp

I know what is happening.. its the old single quote thing messing up the query string..
but it shouldnt be happening with the newer code as I fixed it.

If you like I can go in and reproduce/fix the issue. I can not think of any other way I can help you as other users have not reported the issue.

Chances are if it is happening in one situation it will happen again in the future.. it really all depends on the passwords being used and your encyrption key... other passwords may produce the issue even if the password is correct

basically once the password gets encrypted it by chance has a single quote in it... then it messes up the query

I take care of the situation by replacing the single quote with a double quote but it looks like you found a situation where that didn't work out

I have tried everything to get your CJWSoft code working..I purchased the auto listings software and I am stumped, and actually you stumped my hosting provider, my database is stored in the database directory on the root.

I have even tried your ASPtest and still cannot connect.  My have connected other databases without an issue on this same host, I have named a DNS Auto for my database and ponted to that in my code  but get the following error you see at http://www.burkesauto.com and even when i try you test script found here at http://www.burkesauto.com/asptest.asp .

Every application we sell that has a password on the database uses "temp"

Also, the password is in the connection string in the dataconn_inc.asp file.

After all, the ASP code needs to know the password just like anyone that wants to open the database would.

[/QUOTE]

That i have, my question revolves around the all the users and passwords that I in that database. I need to be able to export that list to word for a mail merge list, but when I do the passwords show up encrypted. I need to be able to get an unencypted list.

thanks

I checked the option pack code as well and it looks correct.
I tested it and it acted as it should.

You can see it in active at the live demo
http://www.aspprotect.com/demo3/demo.asp

admin
test

go the the admin area.. you will notice 3 users with level 4 access
1 of them is inactive

then go to the mass email area and pick   active and level 4
it will say it is sending email to 2 users which is correct

then go to mass email again and pick level 4 and inactive
it will say it is sending email to 1 user which is correct

choose any status and access level 4 and it will send email to 3 users which is correct

When you do this please realize you can not choose a group as well.
That will cause a problem because you can not choose a group and an access level at the same time.


Anyway... perhaps you can private message or use the contact us form and and let me take a look at your system. Since I can't reproduce the behavior that is the only way we might figure this out.

Thanks

It wasn't a complaint. I just bought it last night and installed it today. But, I must have missed the part about requiring Enterprise Manager for installing it on SQL.

If you want it the link to the Web Based SQL Manager is : http://www.aspenterprisemanager.com/ which is free and the Trialware that I tried is EMS SQL Manager.

Maybe that will help a little in not requiring that people have an MS SQL license to access their hosted MS SQL to install the software.

Thanks

Hi Chris,

Our company has a big dilemma on how to manage the database for accounts that are expiring/expired.

We saw the function to email a batch of users who are expiring soon but this doesn't help us to complete the renewal process.

Once the email is sent, what happens afterwards? how can we setup the system so that we can renew their expiry dates or accounts without too much hassle?

The system currently doesn't have any renewal functions or to allow batch changes on multiple accounts at the same time so we have to manually edit one account at a time. This is extremely tedious if we have over 1000 accounts to manage (and we will).

If you have anything to suggest on all this I would appreciate it :)

Thanks alot
Sylvain

edited due to inappropriate content

Hi. Chris.  I'm not a programmer of any sorts, so I am not comfortable plugging in the changes you suggested and not knowing for sure if it will "break something somewhere else".  If the programmer tells me "you have been warned", its a pretty good sign its a no win situation. If you don't know, theres no way i can know.

I saw in the code where you mentioned the changes. I don't see where it mentions the last name is required either, but the bottom line is it does require it it the actual new user form.

Thanks anyway Chris. I'll figure something out.

-john