Hi,

First and foremost, a great product. I downloaded it last night and it took little effort to get it up and running

.....now a little question...

Has the software/code been tried out on a Mysql db and if so did it work?

The reason I ask is that my website is very busy (1.5million page views per month avg) and I'm considering converting the ASPBanner Access db to a Mysql one to help handle the traffic. For every page view one banner impression is being made which means that the Access db is under a bit of pressure

This afternoon there were 1012 simultanious users on the website and it froze with an error message displaying where the banner should have been (I didn't quite catch the message but something to do with the banner script timing out). I'm not sure if the Access db had something to do with it but it seemed too coincidental. Rebooting the server cured the problem but obviously kicked off the visistors as well
At present there's 668 online and no problems so I'll have to monitor it to see how it goes but if anyone can answer the Mysql question I'd be grateful

Thanks,

Dave

I am up to speed on how it works. My goal was to not have just a link to a protected page- so that when a user clicks it they get the "access denied" screen and then have to log in. My goal was to avoid that if possible by having them log in and then redirected to the protected page.

So this isnt possible? The only way for it to work is for a user to click a link to the protected page, get the denied screen, then login and be redirected?

Or is there another way..?

I made my point by rebuttling your "cafepress" with agreeing "YES" that is what i want... now you are changing this around on me. I dont think i can be ANY clearer in what i intend to do. It is extremely clear and i am not sure why its becoming more than it should be. I just want the user to be able to log in from ANY PAGE ON THE WEBSITE AND THEN BE REDIRECTED TO THE PROTECTED PAGE IF THE HAVE THE PROPER CREDENTIALS. It would be nice if this software gave an error message when an incorrect username/password was entered instead of simply refreshing the screen.

(User Photo Upload Mod) for ASPProtect Version 7.x

This will allow an individual user to upload a user picture instead of just the admin.

Notes: This is a down and dirty mod. The user upload code was copied from the admin area and there are no safeguards. Meaning there is no limit on the file size a user uploads and there is no confirmation process in case something they upload is inappropriate. etc etc etc

If you want that you will have to work on that on your own.

Directions:
Back up your existing ASPProtect installation.

copy these files into your "users" folder

2006-01-24_111305_User_Upload_Mod.zip

BTW.. I dont know what is going on But I keep getting all these returned emails. My forum is sending you emails and they are coming back as undeliverable saying your storage space is exceeded on your server.

yes, like macnap says.... you have to protect your ".asp" pages the way the directions tell you to...

and like in the "example" protected pages we provide

or they will not be protected and nothing will happen as far as ASPProtect goes

I guess I just didnt understand what you were talking about

ok... lets forget about all this redirecting business for a minute

when I go to "GP01.asp" directly via your web site I get a big nasty error that says this

Microsoft VBScript compilation error '800a0411'

Name redefined

/protect/config_inc.asp, line 15

Dim  Address_Required,CDONTS_Installed,City_Required,Registration _Type,VerifyURL,Log_Off_Page
----^ 

then when I look at what you did in that file I see why

you have this code which is totally wrong because you cannot include the password protection file twice

<%@ LANGUAGE="VBSCRIPT" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->
<% GROUPACCESS = "*1*" %>

<!--#INCLUDE FILE="check_user_inc.asp"-->

it should be

<%@ LANGUAGE="VBSCRIPT" %>

<% GROUPACCESS = "*1*" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

and that is probably the root of this entire problem.. the redirection was working...
but you were sending them to invalid pages with errors

all those pages are wrong...

if you dont see the real error above see this

http://support.cjwsoft.com/code/moreinfo11-1.htm

if you look over the aspprotect 7 installation instructions that is the very 1st thing I tell people to do

hopefully this is the info you need to continue and get some work done

This first one may be an obvious one, but is it only .asp files that I can protect as in no HTML files.

Can the program be set to protect my whole https directory contents (though the answer to the last question may have bearing here - there are html files as well as .asp in there) as in http://secure.mydomain.com

Thanks in advance

Chris,

Another question on V7.  I set up all the paths as required for the extras like user pics and exports on my site.  They were working fine.  I created an export, then as you recommend, deleted the file on the site to ensure it doesn't get in the wrong hands.  I did this a few times to test it after a number of people logged in.

About 2 days later, I went to do it again and the system came back with an error saying the directory didn't exist.  I know it did because I created it and it worked fine.  I then created the directory again thinking I was losing it.

Then today, I went to do another export and the directory is gone again!  Can you help me understand why this might be happening?  I am the only one with FTP access to the site so there is no way that it could be someone else doing it.  The error I get is:

Microsoft VBScript runtime error '800a004c'

Path not found

/password_admin/export.asp, line 78

Thanks,
Dave

Not sure because of the nature of the javascript method

for starters tighten up the html around the banner call

change

<tr>
<td width="460" height="60" align="center" valign="middle" class="imagead">
<!------- ASPBanner Ad code ------------->
<script language="JavaScript">
var code = '';
var now = new Date();
var nIndex = now.getTime();
document.write('<s' + 'cript src=" http://www.nababaseball.com/aspbannernet/aspbanner/injectban ner.aspx?BannerZone=1&nocache=' + nIndex + '">');
document.write('</' + 's' + 'cript>');
</script>
<script language="JavaScript">document.write(jscode);</script >

</td>

to

<tr>
<td width="460" height="60" align="center" valign="middle" class="imagead">
<script language="JavaScript">
var code = '';
var now = new Date();
var nIndex = now.getTime();
document.write('<s' + 'cript src=" http://www.nababaseball.com/aspbannernet/aspbanner/injectban ner.aspx?BannerZone=1&nocache=' + nIndex + '">');
document.write('</' + 's' + 'cript>');
</script>
<script language="JavaScript">document.write(jscode);</script >
</td>

If that doesn't help I would suggest using the ASP 3.0 version of ASPBanner. It can serve banners to a any type of page extension and it runs just as well as the .NET version. There is a new iframe method for calling banners that you can try instead of the javascript. The iframe method is explained in the ASPBanner Unlimited section of the forum.

ok, PM me some additional info so I can go look around.

I dont quite understand everything going on.

Let me know what to do exactly to be successful logging in and also...

Let me know what to do exactly to reproduce the issue and I will tell you what I think.

--------------------------------------------
(( TRY THIS AT YOUR OWN RISK !!))
--------------------------------------------

2004-08-19_122127_ASPBanner_V7.3_code_banner_encode_decode_m od.zip

This is an Expirmental MOD for ASPBanner Version 7.3 Only
Do not use it on other versions....

It encodes CODE Banner information before saving it into the application variables that handle banner rotation. It then decodes that information before displaying them on your web pages.

The reason for this is SOME very complex javascript does not always save correctly into the application variables that rotate banners (even when not using the JavaScript Method to display the banners)

This way the javascript or whatever you entered comes out on your web page exactly as you entered it and runs correctly.. but there is little more processing going on to handle the encoding and decoding. But its probably nothing to worry about and won't effect performance at all.

Unless your having a problem don't use this mod. It is not officially supported in any way.

-- DIRECTIONS --

( COPY THESE FILES INTO YOUR ASPBANNER DIRECTORY AND BACK UP ALL THE FILES THAT YOU WILL BE REPLACING ))
(( SO YOU CAN REVERT BACK IF THERE IS TROUBLE ))

If you are wondering if the "appinfo_inc.asp" included has the weight banner bug fix applied to it already. That is a bug mentioned in our forums

ALSO:

(( YOU CAN NOT USE THE INCLUDE METHODS OF CALLING BANNERS WITH THIS CODE ))

(( YOU CAN NOT USE THE JAVASCRIPT METHOD OF CALLING BANNERS WITH THIS CODE ))

(( USE ONE OF THE OTHER METHODS ))

After taking another look at this and trying your suggestions without success, it appears that in Windows 2003 server it is nearly impossible to remove the READ ONLY attribute from the _database folder.  I'm wonder if this could the cause?

Thanks 

Cool.

Well I'm in the middle of uploading the txt file and it's about half way done and sitting there...so I'm keeping my fingers crossed.

If you need to know how to enable them on your test server.

http://support.cjwsoft.com/forum/forum_posts.asp?TID=5&P N=1

just leave the databse where it is, use the connection string generated for you and most importantly... put in a request with alentus for permissions to be set

tell them "D:\Websites\www.mysite.com\aspprotect\data" and all of its child folders need change permissions (r,w,x,d) set so aspprotect can do its thing

until the permissions are set that connection string can not work

this is all noted in the installation docs...

Christopher
We are actually having a lot of problems with this software.

Apart from the above problem of the email not being in the database as details above we also do not get any reply emails from any forms, the mass email button does not appear and the forgotten password does not send emails either.

We have CDONTS Version: 2.80 Installed as the email system, this is operational on the server. I have tested this with server_info.asp to check.

I can email you direct any other information you may need.

Regards

that really does not make any sense...

I dont know what else to tell you as this really shouldn't be anything too difficult to sort out...

redirection based on criteria is not something aspprotect does by default... I try to help a bit... I've shown everyone how to do it in this thread...I know plenty of people doing it... I've done it myself... I know it works

let me ask you this... are you using ASPProtect 6 with the Option Pack ?
I assume you must be or you would not have the Groups feature ?
And you asked this question in the ASPProtect 6 section.

but then maybe your using 7.. I do not know

this should all work the same either way

Hello,

If you see that when doing a view source then that code is not running.

I will need to go into your site and look as something is very wrong on a low level and I have no more ideas.

PM or email me the info and I will figure out what is going on.

I'll need ftp or frontpage access to the site.
I'll also need to know the urls for the asprotect system as well as the page you are trying to protect.

CJW

ACCESS DENIED

INVALID Username & Password

Username HAS EXPIRED

If we wanted to user groups, is the "Access Level" in the User setup the same ID as what the group access would be?  Ex. If John had Access Level 4 and the page specified <% GROUPACCESS = "4" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

I'm asking because there is no Group Access Level in the user setup.  Thanks

<!-- Web.Config Configuration File -->

<configuration>
    <system.web>
        <customErrors mode="Off"/>
    </system.web>
</configuration>

<!-- Web.Config Configuration File -->

<configuration>
    <system.web>
        <customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
    </system.web>
</configuration>

you summed it up perfectly... everything you said really

As for the banner software custimizations.. you could just make another folder with a modified admin area (little tweaks here and there so the person logged in only controls their own banners) You'd probably want to add an approval process so nothing they did went live unless you really really trust them. That wouldn't be that hard either.

I always planned to do it someday but I just never have time.

Hello,

I dont know exactly how you go about that and it would really depend on a lot of things like when the ad started and how yu wanted t handle that. it would involve custom coding though, not a change in the database.

I downloaded v7 3/7/2005

I entered a password that was supposed to be all caps with only first letter caps. 

it is odd, if I go to other user and enter wrong password that does not come up.  it apprpriately goes to a screen that says Access Denied.

thx

The main users screen... the 1st screen you see when you go to the admin area..  where you email an individual user..

The settings I am referring to being the various emailing settings on the settings screen, The settings you showed me.

As for emailing via a remote server over dsl. It may not be working because the ISP's block the port (25) to stop people from running email servers over their dsl.

Your POP3 works because POP3 uses port 110.

If you want to send emails from your local server on your dsl you should probably install the SMTP service of IIS if you have not and send emails using that with CDOSYS. Either that or get a commerical DSL account with a static IP that allows for running email servers.

sorry,

there is not.. it gets really complicated
its practically a miracle it does what it does due to the nature of the web

perhaps with some modications it could do mroe but the current version pretty much does what it does