I am using v7 with other software written in ASP.NET. When I include the the "checkfor" and include file, I'm receiving a compliation error.

Here is the include I have on the .aspx file:
<% CHECKFOR = "4" %>
<!--#INCLUDE FILE="../../ASPProtect/check_user_inc.asp"-->

Here is the error:

ok.. There are various spots that call the end_date variable.  That is why I am asking.  Then incorporating it into the forms that have been developed, made me wonder.

here is a thread that may help you if this is what you were getting at

http://support.cjwsoft.com/code/moreinfo389-1.htm

Hi,

The source code comes with it.
They are the.vb files.

I don't give out any project files for reasons stated in the article below.

Please read this in full if you want to edit the application in Visual Studio.NET

http://support.cjwsoft.com/code/moreinfo85-1.htm

Also, I found this page which specifically talks about hidden IPN form values to change currencies

https://www.paypal.com/us/cgi-bin/webscr?cmd=p/acc/ipn-info

mc_currency	For payment IPNs, this is the currency of the payment. For non-payment subscription IPNs, this is the currency of the subscription.
	"USD"	The currency of the payment is U.S. Dollars.
	"CAD"	The currency of the payment is Canadian Dollars.
	"GBP"	The currency of the payment is Pounds Sterling.
	"EUR"	The currency of the payment is Euros.
	"JPY"	The currency of the payment is Yen.

ok...

you got problems if you cant import a file created by the system..

You using SQL or MSACCESS and do any of the users data have apostraphes in it ?

My Admin user got corupted, and I need to reset the password and user, what is the defualt password for this database, as I do not think I have changes this (hopefully) as of yet.

Regards,

Paul

Hello cwilliams, and thank you for the fast reply.

Well, i have tryed with the ASPImage enabled and disabled, with the same results. I have used gifs and jpgs in the tests.
I have made some different test. Some with uploading the picture over an excisting picture and some as the first picture. Same results.
Everytime, it´s the 2nd thumbnail that won´t show itself, but the large picture will show, if you press the thumbnail.

I have tryed to look in the code (view_ad.asp), but as far as i can see, everything seems just fine ?!

I know, it wasn´t much help i could give you, but i think i have tryed all the possibilities.

Best regards, Erling

When that link is clicked on it will then track the click and redirect the user to the “link url” specified for that banner. 

The system actually generates the necessary ASPBanner URL for you. That link is shown on the banner edit screen.(you must save the banner at least once and come back to that screen to see the link though) 

Really the best way to show it is with an example as seen below.

Basically the flash banner file "powerasp.swf" highlighted in green needs to be edited to link to the banner redirect url which is highlighted in red.... the banner redirect url will then track the click and ultimately send the user to the Link_URL highligthed in blue.

All banners systems work this way when it comes to flash files.
It’s the nature of flash and the web browser, 

The flash source code must be edited to link to the redirect url in the ASPBanner system. There is no possible way any banner system can track a flash click unless the flash file links to the banner system 1st.... because that click is handled by Flash and the web browser. 

In some cases if you do have the original source file for the flash banner then you are out of luck as far as tracking clicks goes.



On a side note... if you create flash banners the way this article says you can actually feed a .swf flash file a link for it to click to. Instead of it being hardcoded.

http://www.macromedia.com/resources/richmedia/tracking/desig ners_guide/index.html

This is really the way everyone should design their flash banners from now on because the url it links to can be easily changed at any time without editing the flash file source code. 

Is there a simple way to upgrade from 7.x Lite to 7.x Full?  I was testing out the software and I just purchased it.  I have made some look and feel changes to the lite version (ie: login page), but no look and feel changes to the admin section.  Is there certian files that I can add to have the full version without shorting myself features or functionalbity? 

Thanks

I know what is happening.. its the old single quote thing messing up the query string..
but it shouldnt be happening with the newer code as I fixed it.

If you like I can go in and reproduce/fix the issue. I can not think of any other way I can help you as other users have not reported the issue.

Chances are if it is happening in one situation it will happen again in the future.. it really all depends on the passwords being used and your encyrption key... other passwords may produce the issue even if the password is correct

basically once the password gets encrypted it by chance has a single quote in it... then it messes up the query

I take care of the situation by replacing the single quote with a double quote but it looks like you found a situation where that didn't work out

When that link is clicked on it will then track the click and redirect the user to the “link url” specified for that banner. 

The system actually generates the necessary ASPBanner URL for you. That link is shown on the banner edit screen.(you must save the banner at least once and come back to that screen to see the link though) 

Really the best way to show it is with an example as seen below.

Basically the flash banner file "powerasp.swf" highlighted in green needs to be edited to link to the banner redirect url which is highlighted in red.... the banner redirect url will then track the click and ultimately send the user to the Link_URL highligthed in blue.

All banners systems work this way when it comes to flash files.
It’s the nature of flash and the web browser, 

The flash source code must be edited to link to the redirect url in the ASPBanner system. There is no possible way any banner system can track a flash click unless the flash file links to the banner system 1st.... because that click is handled by Flash and the web browser. 

In some cases if you do have the original source file for the flash banner then you are out of luck as far as tracking clicks goes.



On a side note... if you create flash banners the way this article says you can actually feed a .swf flash file a link for it to click to. Instead of it being hardcoded.

http://www.macromedia.com/resources/richmedia/tracking/desig ners_guide/index.html

This is really the way everyone should design their flash banners from now on because the url it links to can be easily changed at any time without editing the flash file source code. 

The count is in the album area where the small pictures and description of album.   Viewed 1 time(s)  This count never changes.

Thanks

 John

To be honest I just can't remember what happens. It has been a long time since I did a real live test of that. I know it seemed like a pretty smooth process to me. Right now I can not test it out as I am on a road trip with my motorcycle and I am sending this email from my PDA.

I would ask Dave at this website.
http://www.davephoenix.com/

Or via this username in the forums
PhoenixUK

He can tell you what happens as he has been using the IPN stuff for about a month now.

Perhaps another user could chime in here as well and let us know. I know there are a lot of people using the IPN stuff.

When I add a user, I can not activat it.

It sends me back to log on and will now allow me to log in as admin???

I can restart the APP and log in as Admin, but the user I added

is still not activated??

My system will also not allow me to set the Stay Loged in FLag.

It just ignores it....

It's real easy actually if ya sniff around the source code.
ASP is so easy to (work with/edit) even if you dont know any code.


edit   "save.asp" with a text editor

change

If Request("First_Name") = "" Then
  ErrorMessage = ErrorMessage & Server.URLEncode("You must enter a First Name.\n\n")
End If

to

If Request("Company_Name") = "" Then
  ErrorMessage = ErrorMessage & Server.URLEncode("You must enter a Company Name.\n\n")
End If


From looking at that save code I dont see where Last_Name was required. The only name I saw required was a 1st name.

Also.. making the First_Name not required may break something somwhere else. I dont think it will but it might. You are warned.

If you run asplistings auto in its own folder with its own application in IIS. Connected to its own database.

And you run your other version of ASPListiings in its own folder with its own application in IIS. Connected to its own database.

You will have zero major changes to make to anything... other than what you did above..

But remember theyare the same app and share a lot of thing including sessions and application variables.. that is why if they are installed in the same domain each one needs its own application set in the IIS console so they run seperately of one another.

IMPORTANT UPDATE - READ THIS
http://support.cjwsoft.com/forum/forum_posts.asp?TID=205& ;PN=1

The IPN Support Pack which is built in to ASPProtect 7 contains all the pre-built scripts you need to implement PayPal IPN with ASPProtect. IPN stands for (Instant Payment Notification). It allows you to set up scripts on your server so whenever a PayPal web accept order is processed the PayPal server sends info to your server regarding the transaction and vice versa. This is a fully automated process and allows you to charge users for access by the month or however long you like.

This Support Pack basically gives you an additional signup and registration directory "paypal_signup" and it should not interfere with any changes or customizations you have made to your ASPProtect setup in general. New users can register in this directory and pay for membership at the same time. Existing users whether active or expired can be sent to this directory where they can lookup their account and buy additional membership time online. You can also assign various Access and Group Levels during signup and you can set up various prices for various amounts of time as well. This is a real-time setup for the most part. As soon as a user pays via PayPal your system is updated and they will have access.

To use this all you need to do in ASPProtect 7 is enter your PayPal account name into the settings screen. It will be an email address. You'll need a business or premier account with PayPal and you will need log into your PayPal account and turn on IPN in you profile. They make you enter a default IPN URL. We do not use that so if you already have something there leave it there. If you dont have something there you can type in any the full url to any page on your server. It's probably best to send it to an empty ".asp" page or something.

The 1st value is the amount of days.
The 2nd value is the price for the amount of days.
The 3rd value is the access level you want to user assigned to.
The 4th option is the groups you want the user assigned to. (see PayPal subscription thread for examples of specifying group info)

Now, the label for the option in (blue) can say whatever you like.

Hello,

You'll need to find a validation function to test for it.
Either server side or right in the form via client side javascript.

I dont have any experience with validating zip codes here much less UK.

Google it would be my best advice.. or maybe find some free app written in UK format and see how they did it.

Good Luck..

And if ya find anything post it here if ya like

Hope the wedding went well.  I have one this weekend.

I was successful at performing an upload.  The free upload software was either not configure properly (probably) or not working.  I downloaded the trial version of softartisan's upload (which is like over $300) and it started working. 

Can more than one photo be uploaded at one time (like a whole folder full of photos) or does each have to be done individually?

I am not sure totally understand your question.
I need you to explain it differently.

Any ".asp" page that is protected is going to automatically prompt them for a login box or log them in automatically depending on if they set that option.. In the end returning them to that same page.

So, it really all takes care of itself for the most part.. It doesn't even matter if the bookmark a protected page deep in your site. The system is smart enough to keep them at that page as well as handle their access.

Now of course if they are at an unprotected page of your site and navigate to a protected page they get a loin prompt or are allowed in if they already logged in...

Also.. when you say unprotected page ? do you mean ".htm" or ".asp"

OK.  If no return page is set, do they end up on a PayPal confirmation page and have to navigate back to my site by going Back or typing the web address?

Nick

Hi,

I basically explained how I thought that might work here where I went over everything I could think of and suggested you download the free version and see if you could get it working
http://support.cjwsoft.com/code/moreinfo488-1.htm

The part about using the alternate scenario involving querystring info from a url.

I have never done anything like that and that is why I told you what I knew and suggested you try it with the free version...

thx, thats a known error I forgot about.

I just updated the zip archive so the error is gone but if you bought ASPBanner Unlimited Version 7.3 Before April/06/2004 you can optionally apply the fix.


To fix it (only if you want to use the option explicit method of calling banners and not even a really necessary fix as this is just an error in the generated code your supposed to use)

Just edit aspbanner/zones.asp with a text editor.

Where you see the double dim carefully remove one of the "dim" s and save the file.

Terribly sorry, but we are not software-technical.  So can you please tell us exactly which folder the database would be in.

Thanks in advance.

its a text file   you just edit it with notepad..  if ya mess it up ya put an original copy back in

no biggie either way

jump in there..

I just showed ya exactly what to change.. its a no brainer man
This is simple source code. It's meant to be edited and hacked.

The only reason I warn you is so you can't blame me later on if it effects something

I am just trying to help

If ya dont like that solution why not just use periods for the first name field.. or a dash or something... then nobody will really see it

or maybe store the company name in the first_name field

seems like clever things to try without changing the code..

good luck...

if it is your own XP machine there is no reason you should edit that config file manually.

simply set permissions on the data folder and all the folders in it and the application will write to the config files on its own... if you are having problems chances are you are not setting permissions correctly.. please read all of this
http://support.cjwsoft.com/code/moreinfo56-1.htm

if is not an XP machine (your post was confusing and I am not sure) then this is an article for 2003 server
http://support.cjwsoft.com/code/moreinfo136-1.htm

Most importantly whats the real error ? error 500 does not help figure out anything
http://support.cjwsoft.com/code/moreinfo11-1.htm

lastly make sure you go into iis and make that web its own application