Hello,

I really need more infomation..

for starters

what is the server ? iis4,5, or 6 ?

what is the version of aspbanner.. aspbanner standard or aspbanner unlimited ?

what was the error message before you removed the "on error resume next"

was the sql database created using the sql creation scripts we provide as that is VERY important.

and lastly what are the the regional settings of the server ?
what is the date format ?

Javascript Popup/Pop Under Generator

Until I have time to make one I suggest using the one on the banmanpro support site as it is pretty nice.

Just dont use option 2 on that page as that is specific to banmanpro

http://www.banmanpro.com/support/popupgenerator.asp

A correctly configured Microsoft SQL Database is critical to the correct operation of the ASPBanner system.

Table & Field settings must be exactly the way we set them in the database creation scripts provided with the ASPBanner system.

Below are screenshots of the design view settings for all the tables used in the ASPBanner system in case you want to double check them

In addition to the settings above each table has one field that is a primary key with an auto increment of one

In the screenshots above each of those fields has a yellow key next to it.
If the field does not have yellow primary key icon on you just right click and the option to make it one appears.

The SQL column settings for each one of the primary key fields must be set as follows




In addition to these settings the SQL scripts provided with the system auto populate the Banner_Users table with two users. This is very important because without the Admin user the scripts add you wont be able to log in to the ASPBanner system as an admin.

Hello,

VBScript is the most popular ASP scripting language, and has the most support available. I estimate that less than 5% of the ASP coders out there use anything other than vbscript

That being said it specifically says on the aspprotect site ASPProtect is only for use in protecting asp using "vbscript" as the language.

http://www.aspprotect.com/more_info_full_v7.asp

http://www.aspprotect.com/comparison.asp

it is something I specified very clearly for this very reason.

Sorry, but you can not use ASPProtect to protect pages using Language="Javascript". The code is too complex to be mixed with server side Javascript.

To password protect asp pages written using "Javascript" you really need a an application specifically written in and designed to work with ASP pages written using "Javascript". And then of course that application would not be able to protect ".asp" pages written using "vbscript." (I mean never say never, but it would be a ton of work to get both working and I doubt you will ever see a commercial application that does both)

as for switching back and forth between vbscript and javascript you really can't except with very simple code. Doing so with anything complex can be extremely problematic because the order of execution sometimes gets all mixed up because of the complexity of the code being used.

That doesn't mean it can not work....

You would really want to do something like this.


do not specify a default language at the top

surround the aspprotect include file with this

<SCRIPT Language="vbscript">

</script>

surround your javascript code with this

<SCRIPT Language="JavaScript">

</script>

then make sure none the code including the aspprotect include file has any <% or %> tags in it

that means you have to remove that sort of thing everywhere... that means a lot of work if you used a lot of that sort of thing instead of response.writes to write out html type stuff

and again... I don't know if you would ever get it all working

it is an email server/setting issue most likely

your email server probably requires outgoing authentication or something like that and that is why internal emails can be sent to but nothing else

its something along those lines

this will help you see the real error instead of the generic 500
http://support.cjwsoft.com/code/moreinfo11-1.htm

Your probably talking about "Session.Timeout" which is a feature of the IIS webserver. Please do a google search on it for more information.

In the meatime if you look at the top of the "check_user_inc.asp" file you should see a section like this where you can try to change the value.

' Minutes you want before the session times out.
' This is set on the server to be default to 15 or 20 minutes depending on the server version
' You can change it there or override it here.
Session.Timeout = 30

Specifying it like that is supposed to overwrite the value for your web in the IIS console which is usualy 20 minutes.

- I am using the original files that came with the software.
- The software ads items to the database flawlessly.
- ASPImage works great.

- When I try to remove an ad or an image it says it's been removed.
- The ad does not show up on the site anymore.
- BUT, when looking at the sql database the ad is still listed there.

Why is the software not deleting the columns from the database and the images from folder?

Note: My other tables for other projects, in the database, allow me to delete them.

Hi,

That is not enough to go on. I need details in order to help.

Thanks for that.

I have tried InStr("*2*",>"0") in the query design window but it does not return any members.  

I have orded a Access Bible to help me in furture

It's MS Access, Version 7 (the Full one).

Anyway, I had inadvertently changed the user_id field type to "number".  When I changed it back to "autonumber", everything went back to normal.

Thanks you very much for your quick reply and sorry to have bothered you.

as far as sql goes if you follow the instructions with give for setting up a new database you shouldnt have any issues and permissions should be already set. because we handle that in the sql script we give you.. "its a good thing to look at and it is pretty easy to understand what is going on""

however using another account could cause permissions issues.."yes, even sa"     basically the username your using needs datareader and datawriter permissions to all tables used by the photo gallery system and you probably have to go specifically set them usin ght e security tab for your database in enterprise manager. This is more of SQL server 101 than anything to do with the Photo Gallery Code so I am not going to get into it too deeply, but that is definetly the issue.  Permissions...

well, you should probably be backing up the SQL database on a regular basis. That is between you and hosting company. If they let you connect via SQL Enterprise Manager you can do backups on your own.

As far as the aspprotect files and folders go back them up somewhere, and then only worry about backing them up again if you change some of the files.

That's really all there is to it. None of the ASPProtect files change on their own except the generated log files that you may or may not care about backing up.

I mean the important thing is the Database, and then of course any your own .asp pages that you protected as well as any custimizations you made to the users area or your site...

I just did a quick google search... found a ton of info on how to find the setting. Here is one...

These are directions for IIS6 but the process is similar for IIS4-5

1. Click Start, click Administrative Tools, and then click Internet Information Services (IIS) Manager.
2. Double-click your computer name in the left pane, and then double-click Web Sites.
3. Locate the Web site and directory that houses the ASP application.
4. Right-click the application site or directory, and then click Properties.
5. Select Home Directory, and then click Configuration.
6. Click Options, and then click to select the Enable Parent Paths check box.
7. Click OK two times.

Hi,

1. Two months ago, we have set up to use the Subscription services exclusively for all new members and renews. and removed the regular payment service, a carry-over from v6.
2. Many from the "pre-subscription" service have yet to expire, thus have a populated expiry field.
3. With a 10 month bridge before we get all the members onto the Subscription service the "Send email to users that are soon to expire."
is used to remind these.
3. When members RENEW using the subscription service, the Expiry Field is not Nulled and they become targets for future reminders although they have renewed as Subscribers.

XYZ signed up on Nov. 05 2004, we send him a reminder in Oct 2005 and he renews as a SUBSCRIBER. His expiry date field is not nulled and he will keep getting notices although he has paid for another year.

Hope this is clearer... Thanks

The ASP error on the home page has been solved -There was aproblem with the path that was including the home page file and we fixed it.

However the error on the member page remains - any ideas/suggestions would be appreciated. This is the error:

Microsoft OLE DB Provider for ODBC Drivers error '80004005'

[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for

process 0x748 Thread 0xad8 DBC 0x214734c Jet'.

/aspboard/forum/global.asp, line 15

ahh, I see..

that is not really something you should change.. it is pretty much always going to say read for any folder

It's hard to say, but adjusting settings like that could inadvertently change folder permissions in a way that could cause problems and be hard to correct. I really don't know that for sure but it is very easy to totally mess up permissions when trying different things. In the past I had to reinstall iis just to get things back to normal. I eventually over time learned what to do and what not to do and have never had a problem since. I am not saying you are one of those people but a lot of people have problems because they play around with things they shouldn't or they go nuts trying to give every account permission starting from root folders... overwriting important default permissions instead of just making changes to a few specific folders.. not understanding the importance of what they are doing..... etc etc

Sometimes you practically have to be a NT expert just to fully understand permissions. I know a lot and I can handle my own server but it's hard to explain the low level basic of NT permissions to others as there is a lot to it under the scenes. A lot of hard core NT/2000 users do all the permissions from the command prompt because there is a lot more control at that level.

Like I said earlier, what you showed me looks right but this isn't a complex issue and the error means what it means. Something isn't right with the permissions.

I would start from scratch if I were you. Perhaps consider doing an install in a new web instead of in your root like you showed me. Or try installing it on another machine for troubeshooting sake.

I am sorry I can't think of some amazing answer on this one, but I think this is just one of those weird situations that requires starting from scratch or trying it on another machine.

Just as an FYI, I found the problem.  FP2003 has an "Optimize" feature that removes so called not needed spaces and comments from the pages.  It also completely screws up .ASP code.

I turned off the optimization feature and all the pages I was having problems with worked.  However, I would still recommend not using it too!

We have been using ASP Protect for a while now and are big fans of the program.  We received ASP Banner 8.2 with our puchase which we now have a need for.  I went to put the files on our webpage, and doing nothing else other than locating the directory there, I noticed differences with how ASP Protect operates.  We have customized it a bit and want to keep the 2 programs separate.  the login screen for one showed up on the other, and some ASP Protect pages appeared altered so i immediately deleted ASP Banner.  did I do something wrong, and how can i ensure the 2 programs work completely independant of each other?  We can't risk braking what we're now using but would really like to add banner functionality to some of our pages.  maybe an update to the program before we install?  puchase new software?  Thanks for your help-

You should not have single quotes around the "-1" because Album_Active is not a string field in the database. It's true/false or bit field in the database depending on the database you are using (MSSQL or ACCESS)

I'd do it a little more like this I think.

SELECT COUNT(Album_ID) AS Alb_Count FROM " & tbl_label_albums & " WHERE User_ID = " & CmdListUsers("User_ID") & " AND Album_Active = 1"

I took out the parentheses as well since I dont believe they are needed in a simple case like this

but is hard to say unless your the one testing it... my version might have a mistake as I am a little rusty with my SQL at the moment

also: in case your wondering...
depending on the situation and the odbc drivers the 1 and -1 should work either way but sometimes it's picky and you have to do it one way or the other

its just an example connection string in the datacon_inc.asp file
you have the edit it to make sense for you..

the readme.txt file with the sql directions tells you this if you use that script

------------------------------------------------------
Examples of using DSN-LESS connections.

The "SERVER" and "Data Source" settings are either the Network Name for the SQL Server or the IP Address.
For local servers you can also use an IP of "127.0.0.1"

GalleryConnectionString = "Driver={SQL Server};UID=aspphotogalleryuser;password=temp;DATABASE=aspph otogallery;SERVER=127.0.0.1"

or

GalleryConnectionString = "Provider=sqloledb;Data Source=127.0.0.1;Initial Catalog=aspphotogallery;User Id=aspphotogalleryuser;Password=temp;"
------------------------------------------------------ 

How to set a new users expiration date.

You'll need to edit the "users/add_new_account.asp" with a text editor.

Find this section..

<%
CmdAddUser.Fields("ValidateEmailCode") = ValidateEmailCode
CmdAddUser.Fields("Access_Level") = ""
' PUT YOUR CODE HERE
CmdAdduser.Update
ID = CmdAdduser("ID")
CmdAdduser.Close
Set CmdAdduser = Nothing
ConnPasswords.Close
Set ConnPasswords = Nothing
%>

You'll want to add code like this right between the Acccess_Level  and Updates section

CmdAddUser.Fields("Expiration_Date") = Date + 60

That will give take todays date and add 60 days to it.
You can of course do whatever you want here.

Actually, any database value for the user can be set during registration.

You can also change the default Access_Level to whatever you like.

Hello cwilliams, and thank you for the fast reply.

Well, i have tryed with the ASPImage enabled and disabled, with the same results. I have used gifs and jpgs in the tests.
I have made some different test. Some with uploading the picture over an excisting picture and some as the first picture. Same results.
Everytime, itīs the 2nd thumbnail that wonīt show itself, but the large picture will show, if you press the thumbnail.

I have tryed to look in the code (view_ad.asp), but as far as i can see, everything seems just fine ?!

I know, it wasnīt much help i could give you, but i think i have tryed all the possibilities.

Best regards, Erling

I really do not know.. maybe it is a conflict with something else..

I run many instances of aspbanner on my servers and I have every item to log enabled for my iis log files... my stats server software which reads those log files (livestats and smarterstats) have never reported any 404 errors related to (aspbanner/those images)...

I do not know what is happening in your situation..

sorry.

maybe this is the issue...

do you realize that the descriptive name you give a group is not always going to be the same ID in the database ? The two are not related.

Perhaps what you named Group 1 is really group ID 3

You can tell for sure by generating protection code for group 1 and see what ID it tells you to use..



You also need to remember that you are testing this with different users and it is really easy to get confused so you need specifically log off using the log off page to ensure session info from the previous login doesn't show up and cause confusion when you log in with a different user... etc etc

in addition to logging off that way you may also want clear the session and application info via the code at the bottom of my article
http://www.powerasp.com/content/new/displaying-session-and-a pplication-variables.asp

and do that in between any user you log in as

The only major usability issue I've found to date is multi-zone banners. Cloning is helpful to a point, but then if you have a change to that banner, you have to make the change 6 times or what have you. I think, even at the expense of speed, multi-zone capability for a single banner would be excellent addition. Of course, that supposes I haven't just missed it and it's already there.

Is it possible to change the currency for accepting payments?  I will like to change from US to Canadian.

Thanks in advance
Roy

Is there any way to extend the limit multiple login feature to a certain number instead all or none?  In other words, i need to have a user be able to use the same login for x number of people.  My customers are institutions and want to be able to have a single login for however many users they purchase for.

That did the trick. Once again a quick very helpfull reply.

Thanks.

Okay, here's the problem.  The out of the box sql script creates a catalog called aspphotogallery and a user id aspphotogalleryuser.

The out of the box GalleryConnectionString tries to access a catalog called aspgallery and a user id aspgallery

'*** GalleryConnectionString = "Provider=sqloledb;Data Source=p600laptop;Initial Catalog=aspgallery;User Id=aspgallery;Password=temp;"

I see the readme.txt has been corrected but the line in dataconn_inc.asp still needs to be changed.