I dont know about the unspecified errors. I really need more detailed information. (Since it has been working fine for quite a long time you might want to consider installaing the application from scracth again and see if you still get errors)

As for the log in not persiting. Did you by chance turn off cookies in your browser ? They are required for forms based authentication to function. Otherwise, yes you would need to log in to each and every page as you moved around.

rrabago

I have been looking over the code and also doing some tests.

So far everything in the code looks correct and everything I have tried has worked correctly. If I select an access level and active users it is not sending emails to inactive users as you stated.

Are you using the option pack ?

There is no way I'm going to spend hundreds of dollars for a thumbnail creation program. Mine is a family web site and all out of my pocket.

Is there any free products that work with Gallery that will create the thumbnails? If not can I create them on my own and link them to the pics? There are tons of Perl based freebies out there.

Steve

ASPProtect v7.x has a new feature called groups.

Groups are meant as a replacement for using the access levels as they are much more powerful. Support for pages protected using access levels is left in tact for backward compatiability for a customer that was using them.

A customer recently told me groups could not be used like access levels and that 8 access levels was not enough. This is how I explained that groups can do everything access levels can do.



Groups can honestly do everything access levels can do if you really think about it.
Using groups and protecting pages accordingly you could actually create a system that basically worked identically to the way the access levels works.

For example..

You make 8 groups and assign users to them accordingly

Protection code on page allows access to groups 1-8
The aspprotect system generates this code for you…

<% GROUPACCESS = "1,2,3,4,5,6,7,8" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

In this case a user assigned to any one of those groups would have access..

Protection code on page allows access to groups 2-8
The aspprotect system generates this code for you…

<% GROUPACCESS = "2,3,4,5,6,7,8" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

In this case a user assigned to any group between  2-8 would have access..

Protection code on page allows access to groups 3-8
The aspprotect system generates this code for you…

<% GROUPACCESS = "3,4,5,6,7,8" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

In this case a user assigned to any group between  3-8 would have access..

and so on... I think you should get the picture by now

I made the changes like you suggested, but now the page just times out before even loading. 

<%
ConnectionString = "DBQ=D:\clients\rklarman\DrWeisbergUsers.mdb;Driver={Microso ft Access Driver (*.mdb)}"
DatabaseType = "MSACCESS"
%>

No can do.  In both cases there is an icon that says "Not uploaded".  I click in it and nothing happens.  There is no link to upload.  Am I missing something?

By the way, I appreciate and am impressed with your rapid response. Thanks.

ahh, I see..

that is not really something you should change.. it is pretty much always going to say read for any folder

It's hard to say, but adjusting settings like that could inadvertently change folder permissions in a way that could cause problems and be hard to correct. I really don't know that for sure but it is very easy to totally mess up permissions when trying different things. In the past I had to reinstall iis just to get things back to normal. I eventually over time learned what to do and what not to do and have never had a problem since. I am not saying you are one of those people but a lot of people have problems because they play around with things they shouldn't or they go nuts trying to give every account permission starting from root folders... overwriting important default permissions instead of just making changes to a few specific folders.. not understanding the importance of what they are doing..... etc etc

Sometimes you practically have to be a NT expert just to fully understand permissions. I know a lot and I can handle my own server but it's hard to explain the low level basic of NT permissions to others as there is a lot to it under the scenes. A lot of hard core NT/2000 users do all the permissions from the command prompt because there is a lot more control at that level.

Like I said earlier, what you showed me looks right but this isn't a complex issue and the error means what it means. Something isn't right with the permissions.

I would start from scratch if I were you. Perhaps consider doing an install in a new web instead of in your root like you showed me. Or try installing it on another machine for troubeshooting sake.

I am sorry I can't think of some amazing answer on this one, but I think this is just one of those weird situations that requires starting from scratch or trying it on another machine.

you password protect an asp page in your site "where that is is up to you"

http://support.cjwsoft.com/code/moreinfo171-1.htm

then you link them there from your own pages

thats all there is to it

is that what you are asking?

Additionally...any page you password protect automatically becomes a login page... where you want to start and where you send them after or before login is something you have to handle on your own

Any pages you pasword protect will prompt the user for login info if they are not yet logged in that is.

Then once logged in it returns them to the same page they are showing the page content as it would normally appear.

"save_pic_desc.asp"

in both the admin and users area needs to be edited

You'll see something like this...

If Len(Image_Description) > 250  Then

just change 250 to something higher.. I wouldn't go much over 500 though as it may cause problems.. I am really not sure.. Changing it higher is done at your own risk.

Hi,

Sorry, but the way the system works you can not call an individual banner like that. It just not something the system was meant to do.

If you wanted a specific banner to show up at all times you would have to make an individual banner and a zone just for that.

After looking at your site since you have so many banners there I dont know if that is the greatest option for you. It would also put a lot of stress of the Version 7 software because it is not really meant to call so many banners zones at one time on one page.

If you could live with tracking clicks on the home page but not displays I would suggest making banners for the home page in one zone. Then hard coding the banner images into your homepage like you already do but linking to the tracking part of aspbanner instead of where they would usually link to. That way you could at least track clicks and there owuld be no performance issues.

for example.. one of the images might link to
http://www.poconocommuter.com/aspbanner/banner_redirect.asp? Banner_ID=4

which would track clicks for you.. and then send then wherever they are supposed to go

you have to check the session variables for groups a little differently.. info on that is here

http://support.cjwsoft.com/code/moreinfo198-1.htm

Please forgive any ignorance on my part.

Using the live demo, it seems that with the banner software my advertisers would only have access to reports, but no ability to upload banners, specify keyword triggers or zones, what have you. Is this correct?

The other thing I couldn't quite figure out, assuming I had a categorized directory on my site, is this system configurable to display different banners based on category? Perhaps through keyword triggers?

Thank you in advance for any assistance.

I am having problems with a password a user wants to use.  He wants HANNAH.  When he (or I) try to log in with his username and password, I get a syntax error  -

Syntax error in string in query expression '(Username = 'changedforsecurity') AND (Password = ' éG'.
pathOnComputer../1protect/check_user_inc.asp, line 114

I've obviously changed the username and the server path in the info above for security. 

I have not messed with the encryption.   

What is it that the system doesn't like in the word HANNAH as a password?  I would just change his password for him but this guy has enough trouble just turning the computer on!  Confusing him with a new password would take weeks to set him straight. 

Thanks,
Mick

Hello,

Sorry, I do not have any good ideas on this one...
Domain Name Masking can cause issues with quite a few things.

I am trying to import a file, and I get this error:

Microsoft VBScript compilation error '800a03f9'

Expected 'Then'

/aspprotect/password_admin/upload_post.asp, line 6

If Session("Admin") <> "True"
-----------------------------^

Any suggestions on how to fix it?

Thank you.

This article from my old powerasp.com site explains what Server.MapPath is and also why you can't use it to specify the data connection in any of the CJWSoft applications.

Use ASP to determine the Physical Path Of Your Virtual Website

As this article mentions you can still use it to determine the path, but you can't use it in our data connection strings because the data connection page is an include file and server.mappath will report back different paths for the different directories....... meaning it will work in one directory level but not another as the path will be different.

The problem was that I did not have

ConnectionString = "Driver={Microsoft Access Driver (*.mdb)}.... in the connection string.

Thank You.

From: Mo Afifi
Sent: Sunday, October 23, 2005 4:47 PM
To: CJWSoft Support Info
Subject: Re: CJWSoft Support Info : SSL - Verisign Certifcates

Got it working.    Had purchased a long time ago and forgot about needing to run the userreg.exe.  All is well and thanks for the follow up.

Lance

You would set the groups during users signup the same way you would do the expiration in the following example.

http://support.cjwsoft.com/code/moreinfo170-1.htm

The groups field need to be set the exact same way it would look like in the database of course

So, if a user was part of groups 1, and 2

You would look in the database and see this in the groups fields for that user

*1*,*2*

so in the signup code you set that like so

CmdAddUser.Fields("Groups") = "*1*,*2*"

This info only applies to resgitrations and signups using the "users" folder.
if you wanted to make different sceanrios you would need to carefully make a copy of the users folder and adjust it accordingly

i will probably end up doing this myself, but dropping all the log data in a sql table would be nice as it offers much more flexibility on how an admin can keep track and use the data. Browsing through each log file is very inconvenient. I can search for text in the files (server-side, others with a shared server would probably have to separately download all log files first), but with the current method I don't have the following important options:

• cannot sort by any criteria
• quickly see a list of all login attempts by a specific user (i need to search each log file individually for this info)

if you had an option during setup perhaps (or elsewhere) in a future version that allowed an admin to specify the preferred logging method (separate files or a table in sql) i'm sure many admins would find it very useful to have a database alternative of keeping track of users becuase it would offer the two benefits listed above, plus more.

You would carefully use the built in features of access to import/export data.

The password for our databases is noted in the documentation. It's pretty hard to miss really. You can also see the database password by looking at the connection string info.

different versions may be different but it is usually "temp" minus the quotes

OK, I figured out the problem.  Not running ASP becasue the pages are not saved as ASP but rather HTM... OK so I am smart like a tractor but strong like an ox.

I believe what happened is we received the older copy of ASP Banner iwht our purchase of ASP Protect and were notified of a free update to download aspbanner_unlimited_v8.2_feb_26_2005.zip which we did, and that's the one i recently put on our site.

  Sounds from your reply that something technical is going on to the point where I will have to hire one of our Web consutants to dissect for us.  We'll try again and track our issues and send another request for information when we can show you a specific example of what is happening.  I'll be in touch.