It's custimization work. and just not something I can support.
Basically it is basic ASP/Database work.

Something you kind of need to figure out on your own. It's not difficult work for a good asp coder but there is no easy way and it is time comsuming.

I wouldn't use the custom fields though. I would make your own.
It's simpler that way.

I am trying to set up ASP protect 6 and have a problem that when a new user registers their email is not transferred to the database.

I can see the rest of their entries both in the database and in the admin/edit form but not the email.

Any ideas?

Just got back 10 minutes ago..
Missed plane yesterday because of traffic and the flight today was 3 hours plus 4 hours of driving

The fact that you are using Server 2003 is not relevant. I am very familiar with it and all my sites run on it.

The ASPNET account will be there by default once the .NET framework is installed. It won’t just show up in the list, you have to search for it like my article mentions.

http://www.powerasp.com/content/new/windows_2003_server_and_ permissions.asp

Installed latest verison  Doesn't seem to have corrected problem.  Still with same message.  I wonder if deleting this user and putting him back in might help.  I have not however tried any other user names and passwords.

Regarding installation in a subfolder

Though this should be common sense and ASP.NET 101 "so to speak" One thing not mentioned in the docs..


If you do not install ASPProtect.NET in the true root of a web there a key in the web config you must adjust.

it looks like this

<forms name=".aspprotect~net" loginUrl="/aspprotectlogin.aspx" protection="All" timeout="60" path="/" />

The way it comes it is valid for a root installation..

lets say you installed the application in folder called.
"aspprotectnet"

the key would change to this

<forms name=".aspprotect~net" loginUrl="/aspprotectnet/aspprotectlogin.aspx" protection="All" timeout="60" path="/" />

Hi,

Sorry, but if  ".asp" pages download instead of run on a server then that means ASP is not working on the server and is not configured correctly. That is about as low level as it gets and it is really the hosting companie's responsibilty to sort that one out.

It is totally a system admininister's job to make sure that sort of thing is working. If this place supports ASP they really need to fix that for you. There really is nothing  I can do for you until ".asp" pages at least run.

As for the Free install... that is no problem. Of course you need to get the hosting company to fix the web before I can be of any help. There is more to that problem then permissions.

For starters I would make a simple ".asp" page with hardly anything it (even some simple html text is fine) and ask them why it is downloading instead of executing and to please fix things.

I have been working on this all night long. I have been reading every possible article. I have created an ODBC connection on the server.. which i have never done before? Still nothing. I looked at the machine.config file... i read about impersonating whatever the hell that is... I am really stressed out. I have the 1.1 framework installed.

I read about dsn and dsn-less connections. Is there another way i can connect to the database? Without using a username and pw maybe?

Please Note : ASPProtect v7.x has a new feature called groups that is much more powerful than access levels. Access Levels were left in the product primarily for existing customers that upgrade to the new version so they do not need to make a lot of changes to their site if they were using Access Levels.


More On Access Levels

Again, Examples of managing Access Levels are provided in the "multiple_access_levels" folder included in the root of the Password System. Look at the source code of the ASP pages in that folder with a text editor to see the working code.

Access Levels and how they work can be re-coded to work in many different ways. However, you have to be a good ASP developer to make changes to it. Here is some information on how they work by default.

In the "check_user_inc.asp" that comes in the root of this system Access Levels work as follows.

Level 1 has Access to - Level 1
Level 2 has Access to - Level 1,2
Level 3 has Access to - Level 1,2,3
Level 4 has Access to - Level 1,2,3,4
Level 5 has Access to - Level 1,2,3,4,5
Level 6 has Access to - Level 1,2,3,4,5,6
Level 7 has Access to - Level 1,2,3,4,5,6,7
Level 8 has Access to - Level 1,2,3,4,5,6,7,8
ADMIN has Access to - Level 1,2,3,4,5,6,7,8,ADMIN

Here is some additional info..

If the access levels are too restrictive you can ignore them all together and create your own totally custom solutions.
Here is a quick rundown of some of the things you can do.

Ok... so if you want to be really specific about what each user can see and
can't .. here's an example of what you can do

Don't use the access levels before the include file..
Don't worry about what you set a user to in the admin area since the access levels won't be used.

Do something like this..

Every time a user logs in session variables are set that you can access at
any time.. thus allowing you to know who they are.

So you could do something like this...


<%@ LANGUAGE="VBSCRIPT" %>

<!--#INCLUDE FILE="check_user_inc.asp"-->

<%
If Session("USERNAME") = "bob1267" or Session("USERNAME") = "carl45" or Session("ADMIN") = "True" Then
Session("PASSWORDACCESS") = "Yes"
Else
Session("PASSWORDACCESS") = "No"
Response.Redirect(Request.ServerVariables("script_name"))
End If
%>

The following URL explains what Redirects are.
http://www.powerasp.com/content/code-snippets/redirects.asp

That would in effect create totally custom access levels.. but you would
have to do it manually for each user.

You can also do things like this after a person logs in

Show custom html to any specific user based on either their username or
access level ... like so

say there was a menu and a certain link should only show up to username
"paully67"

you could do something like this


<HTML>
<HEAD>
<TITLE></TITLE>
</HEAD>
<BODY>


<br>
<a href="main.asp">Home Page</a>
<%
If Session("USERNAME") = "paully67" Then
%>
<br>
<a href="paullys_page.asp">Pauls Stats Page</a>
<%
End If
%>
<br>
<a href="links.asp">Links Page</a>

</BODY>
</HTML>

Or you can show custom HTML or links based on Access Levels or any other info.

You can do just about anything with if-then statements and
using the built in vbscript functions..

Hopefully this info will help to give you some ideas...

Bottom line is you have to do some work within your site to make the Access Level system really come alive.

as far as permissions are concerned I wrote two large articles about permissions that cover everything in detail on how to properly set them

http://support.cjwsoft.com/code/info11.htm

see the windows 2003 and windows xp permission threads

From things you are saying I assume this is your server. My comments about the path looking funny are because very few commercial hosts would use the "c:\inetpub\wwwroot\" directory. If you are using that and that is correct info then that is fine.

as for knowing whether or not the filesystem object is working the best thing to do is to try to write  a text file somewhere in your web and see if it works. Testing something under the most basic scenario is the key to troubleshooting asp issues.

http://www.devasp.com/samples/writetofile.asp

I have a customer who is asking the following:

... could you make a link from it to our website and is there a way to see what traffic goes from us to them.  They are going to pay a commission on sales, however I need to be able to track who views their site...

Wishful thinking or could you add code to track their IP address and display in the report section?  Not sure that would be enough to satisfy this request.   Suggestions?

Thanks, Lance

All of the fields with the expected paths show the correct file structure, so now I've put them in them in the boxes

The problem with that is when a user deletes an album, the album record does not get deleted from the DB, so counting all the records would return the accurate result. :(

Any hints?

Good Morning, any suggestions on how to best "fake out the system" -- I would like to try to keep this clean so I can see the real errors?

My thought was to try to just move those .gif files to the directory that it thinks it should be in -- do you have any better suggestions? Or reasons why I really wouldnt want to do that?

Sorry, I guess you did say you finally found them.
Regardless, sorry then, I tried

I dont know what else to tell ya.. except to search www.aspin.com

Perhaps you will find something you can use there.

Okay, this also shows at the bottom of the import/export page

I've got the IUSR account with modify permissions on this data folder as well.  Is the "this directory needs change permission" line just a general reminder?

Files are being stored in "D:\missourirealtor.org\members\aspprotect\data\export\\"

This directory needs change permissions for the anonymouse webserver account.
Those permissions can only be set by your hosting company.
These features will not work without those permissions being set.

just leave the databse where it is, use the connection string generated for you and most importantly... put in a request with alentus for permissions to be set

tell them "D:\Websites\www.mysite.com\aspprotect\data" and all of its child folders need change permissions (r,w,x,d) set so aspprotect can do its thing

until the permissions are set that connection string can not work

this is all noted in the installation docs...

Different Versions of the Access Database

Below is a zip file with many alternate versions of the Access Database provided to help with installation and general usage.

2005-02-20_155310_ASPProtect_Database_Versions.zip

ASPProtect.mdb is saved as an Access97 database (password "temp")
ASPProtect_access2000.mdb is saved as and Access 2000 database (password "temp")
ASPProtect_access2000.mdb is saved as and Access 2002-2003 database (password "temp")
ASPProtect_access2002_no_password.mdb is saved as and Access 2002-2003 database with no password set on it

Try to use the newest version as server odbc drivers sometimes have to use the newest version for everything to work correctly. No password version is provided because sometimes there are issues connecting to a database with a password set on it.

Default username for access databases is of course "admin" but you really dont use that except in the data connection information.

Chris: You are right about a little extra coding to make it work. I am still learning .ASP coding, so I did a little web searching and used IF THEN statments to confirm a member logged in with a valid Access Code. If valid, the protected page executes, with the Member's Name and Access Level on a single line at the top of that page. Looks sharp! If not logged in, or a non member (who found the page via Google), I used a Redirect to send s/he to a login page with optional links as you suggested (http://www.vspa.com/aspprotect/vspa-password-failed.asp) . I couldn't get it to work when using Group Access, but I am sure that is just because I am a novice at .ASP (I will post that example when I figure it out). Meanwhile, here's the code I used that works:

<%@ LANGUAGE="VBSCRIPT" %>
<!--#INCLUDE FILE="dataconn_inc.asp"-->
<!--#INCLUDE FILE="check_user_inc.asp"-->
<!--#INCLUDE FILE="config_inc.asp"-->
<% =Session("First_Name") %>&nbsp;<% =Session("Last_Name") %>:
<%
If Session("Access_Level") = "6"  Then
    Response.Write "VSPA Active Member Access Level 6"
 End If
If Session("Access_Level") = "7" Then
    Response.Write "VSPA Life Member Access Level 7"
 End If
If Session("Access_Level") = "8" Then
    Response.Write "VSPA Officer/Staff Access Level 8"
 End If
If Session("Access_Level") < "6" Then
    Response.Write "Access Level 1-6 NOT AUTHORIZED RESTRICTED AREA ACCESS"
    Response.Redirect("vspa-password-failed.asp")
End If
%><!-- http://www.vspa.com/aspprotect/vspa-password-enter.asp -->
<!-- *** End ASPProtect Code *** -->
<html>
<head>

I checked through the code and could not find anything as well. 

However, I do think it may be related somehow to the code as I get the messages popping up in the error log only after I have edited a banner.

If there is nothing obvious, I may just set my error log to filter and automatically delete this type of error.  Not something I prefer to do.

Thanks for the quick response.

Otherwise the program is working very well and I'm happy with it.

Your actually confusing me with the whole "joe bloe" thing and user access. I just do not get what you are trying to tell me. Perhaps you can explain in a less confusing way. Your just not technically explaining it andand thats what I need to know to possibly help.

As for the subweb thing you just can not do that. Subwebs have their own sets of application and session variables. An ASPProtect installation and any pages you protect with it are required to be in the same "application" in IIS. Sicne subwebs have their own "applications" in IIS that won't work. It is the nature of "forms based authentication" A sub web is alo considered by our licensing to be a seperate web site and ASPProtect is licensed per web site.

As for breaking pages.. you really shouldnt be editing any pages in the admin area as you will break them unles you are very good with ASP. (does not sound like you are..no offense meant at all)

Pages in the "users" folder are less complex and it is usually ok to edit them carefully.
http://www.powerasp.com/content/hintstips/common_sense.asp

Pages of your own that you password protect can still be edited in your usualy way though without effecting anything.

Truth is if you back things up before you start editing how can you go wrong ? That's how you learn.

Hello,

no default setting for something like that... what your thinking about doing is on the right track I'd say

We want to insert a hyperlink i the mesage area when we e-mail users from the Password Admin area.  Is ther an easy way to insert the hyperlink so when the user gets the e-mail, they can just click on it and go the the page we want them to?

Thanks,

Andy

Christopher,

Thanks for the reply. I think I've found my problem, but can't test until later in the evening as it is on a live site.

Darrell

Testing for XML Parser Support

the microsoft xml parser is generally installed by default on all new server setups..

It allows ASP code to make calls to other pages anywhere on the new as well as a lot of other handy things..

download and run this ".asp" page to verfiy that it is installed and be sure it is available for you to use

2004-12-10_132620_test_xmlparser.zip

Make sure you run it from your web server through the web browser

An email I just received from eastcoastguy.. to keep this thread up to date

How to set a new users expiration date.

You'll need to edit the "users/add_new_account.asp" with a text editor.

Find this section..

<%
CmdAddUser.Fields("ValidateEmailCode") = ValidateEmailCode
CmdAddUser.Fields("Access_Level") = "4"
' PUT YOUR CODE HERE
CmdAdduser.Update
ID = CmdAdduser("ID")
CmdAdduser.Close
Set CmdAdduser = Nothing
ConnPasswords.Close
Set ConnPasswords = Nothing
%>

You'll want to add code like this right between the Acccess_Level  and Updates section

CmdAddUser.Fields("Expiration_Date") = Date + 60

That will give take todays date and add 60 days to it.
You can of course do whatever you want here.

Actually, any database value for the user can be set during registration.

You can also change the default Access_Level to whatever you like.

I have one file called asplistings.sql but I have license for ASPListings_auto and ASPListings_real_estate.  I really want to use the SQL server for both.  Please advise how?

Thank you.
Lance

Thanks very much for the tip. I'm a beginner with all this stuff so forgive me for the inate stupidity!

By the way, I think the system is great and I am very pleased my purchase.

I would also double check that you changed the field size correctly and on the correct database that is being used in the connection string

Hallo,

Can I change the number of the access levels?

I want to have about 20 levels...