I think you getting all confused about dsn's and what they really are.

A system dsn gets created via the ODBC control panel and gets listed there. A system dsn is nothing more than a registry entry telling information about where the database is an how to connect to it. Then every time code accesses the database it has to do a registry lookup. The whole process adds a lot of delays, causes very poor performance and is unnecessary.

A dsn-less connection simply connects directly to the database by specifying the driver being used, where the database is, and some other information like the password if there is one.

To get aspprotect or any other ASP application using a database all you have to do is make sure the database folder has correct permissions and then make a connection string like so. (with the correct info for your directory structure of course)

DBQ=c:\inetpub\wwwroot\aspprotect_6\data\database\ASPProtect _access2002.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp

If you are wondering Access databases always use the same username.

So, basically if permissions are set correctly and the directory is valid it will work.
It is really that simple. 99% of the time when people have problems it is one or the other.

That being said, don't worry about the odbc control panel and what is listed there for connections. All we really care about is that odbc drivers are installed and somewhat current.


One last thign for reference: even if you do make a system dsn the database folder still needs the correct permissions.

I run F-secure on my laptop which has the anti-virus and firewall modules, and the servers aren't running anything like that.

you can not limit image size using the pure code upload method. Its not possible using a pure asp method that I know of.

You would have to be using one the supported commercial upload components and edit the upload code accordinly to limit upload sizes (you would do this by looking through their documentation and samples) I didnt include any support for upload file size limitations with the supported 3rd party upload components because in my testing I found it problematic with all but aspupload from persits software. (I have example coe for that component I can provide that limits the upload size and seems to do it well) I am sure it could work with safileup and dundas as well but I gave up trying.

As for image resizing..
Image resizing requires the use of one of the supported 3rd party image resizing components. You didnt mention if you are using one or not. If you dont have one available image resizing is just not possible as asp can not do that on its own.

Hello,

1.)

I dont really have any ideas about the japanese characters. I also don't have any ideas about changing settings in the database. Your going to have to do some research on all of that.

Perhaps try pasting the text into a text document 1st.. then copy/paste them into the application. Perhaps that will eliminate any unseen weird characters. I do it sometimes when pasting things from word to my html editors and it works great.


2.)

I dont/cant support custimization to the code but here are some tips to get you started.

edit "items_inc.asp" carefully with a text editor
(back it up before you begin so you can revert back)

change this anywhere you see it

?SORTBY=Name

to

?SORTBY=Name+Asc

or

?SORTBY=Name+Desc

Expiriment to see which gives you the desired sorting.
Do the same process for the price.
The + Sign just passes a "space" back to the page in the proper format if you are wondering.

3.)

The items for page setting is easy. Just go to the settings page when logged in as the admin. Edit this field.   "ResultPageSize"

Is there a simple way to upgrade from 7.x Lite to 7.x Full?  I was testing out the software and I just purchased it.  I have made some look and feel changes to the lite version (ie: login page), but no look and feel changes to the admin section.  Is there certian files that I can add to have the full version without shorting myself features or functionalbity? 

Thanks

I am converting the email over from CDONTS to CDO so it will run on my host 2003 server.

What files should I be concerned with?  Under gallery_admin there is an email_user.asp and  under the main gallery folder thier is an email friend. Is there an other email routines I should be concerned with?

Thank You for your Assistance.

Jeromy

Is it actually possible, with your product, to password-protect the folder that has the actual database without having to require customers browsing the listings to enter a password, or will password-protecting the database folder prevent customers from browsing the classifeds listings?

lets get back to using the forum and not the pm's  please only use the PM's for sensative information. its too hard for me to keep track of all of this as well as help everything else when I got an inbox full of pm's

Ok, so you say no paypal subscription info is being put in the database at all.

I know we have a bunch of people using the paypal subscription code with no issues so I know it works but obviously you got something wrong.

It could be a few things.

Did you enable IPN in the paypal system and put in a postback url like my directions say ?

Are you sure you are not getting paypal single payments and paypal subscriptions mixed up ?

Are the paypal links you made for paypal subscriptions in the correct format like are directions state ? That is critical and another example of something important that you have not shown me.

Did you populate all settings correctly for our paypal subscription code ?
This includes a correct and valid postback url because if that is not right paypal cant communicate with the aspprotect system and no info will get posted back from them at all.

You say your upgrade went well but if you did all all field names perfectly there could be issues with that.

There is just way too much for me to figure out under free support with the info you keep providing me.

I dont think we are going to get anywhere unless I go into your system and spend a considerable amount of time checking everything out. That is not something I do under normal support so if you are interested it is going to involve a fee paid via paypal. It's probably going to take me a while to check everything out and I need you to be 100% sure IPM is enabled in your PayPal account. If you are not sure how to turn it on search their help system as they have plenty of documentation on the process.

ok.. There are various spots that call the end_date variable.  That is why I am asking.  Then incorporating it into the forms that have been developed, made me wonder.

the menu file.. "menu.asp" or something... just follow the logic of the code to find things like that. Look for server side include files and what not in the source code.

This is a good article on figuring out what pages to edit as well as other things.
http://www.powerasp.com/content/hintstips/common_sense.asp

If it was working and you changed code you could have possible messed up how all of that works... you may need to revert back and be really careful as you make changes testing every step of the way.

The Pop-Up Javascript Date Pickers will only show up of your server's regional settings are set to one of two lCID values.

1033 which is English - United States
mm/dd/yyyy date format

or

2057 which is English - United Kingdom
dd/mm/yyyy date format

Many servers are set to run the default LCID which is 2048 so the banner system will not show the date pickers.

This setting can however be easily overwritten when using the ASPBanner system.

or

Session.LCID = 2057

depending on what date format you are looking to use

Save the file and go edit a banner. The date pickers should be there now.

I was actually able to do similar thing by allowing our dedicated search engine to access the site unchallanged.

<%
If Trim(Left(Request.ServerVariables("HTTP_USER_AGENT"),11)) = "MYPASSWORD" Then  
 SearchFlag = True
End If
 
If SearchFlag <> True Then
If Session("Access_Level") > CHECKFOR or Session("Access_Level") = "" Then 
%>
<!--#include virtual="/Auth/check_user_Code.asp" -->
<head>
<title>My Title</title>

</head>

<body>

My Protected stuff here

</body>

</html>

For this to work, the search engine must pass the PW to the web site. I just was not sure how to do the same thing with IPs. I will play with the code and see what happens. If it works, I will post it here to help others, if this is OK with forum rules.

Thanks,

Mo

that wont work the way you did it because groups are not stored like like.

groups are stored "*1*"
or "*1*,*9,*"

so if you test for them you must do so using the InStr function of vbscript

example:

If InStr(Session("Groups"),"*1*") Then
    ' do whatever
End If

also.. as for the session variable
it should be    Session("Groups")

And in Version 6.... (its all ready to go in version 7) that session variable must be saved in the check_user_inc.asp file near where all the others are saved. If it is not there by default "I dont remember if it is or not" you have to add it like so near where all the others are saved

Session("Groups") = CmdCheckUser("Groups")

If you are wondering if it is being saved correctly you can always response.write out the Session("Groups") to see if it holds a value

Good Evening,

I have been trying to log into my site using the protected pages comments you have in support. I have copied the code in the ASPprotect 7 guide.

<%@ LANGUAGE="VBSCRIPT" %>

<!--#INCLUDE FILE="check_user_inc.asp"-->

and pasted it in my page, set the the IIS to open this page and the page will not open it and the page will not open and the error is

Error Type:
Active Server Pages, ASP 0126 (0x80004005)
The include file 'check_user_inc.asp' was not found.
/olem/reldt/introduction.asp, line 3

When I remove the two lines of code everything goes normally.

I have aspprotect in its own directory in the website. I have read the installation several times and I am afraid I am missing something blatently obvious so I really appreciate you thoughts.

I am presently using redirects. I like not haveing to use them as your comments have suggested. I have pulled all that code from the pages I desire to protect during this test.

I have three test users in my database - 1 administrator

Any suggestions?

Thanks and best regards

I have seen that happen before though it usually just happens once and then after that it doesn;t show up. It's the asphttp component doing it. The ASPBanner system is not doing it. I would try using banner calling method such as the xml parser method. It's usually installed by default on 200 and 2003 servers.

The Double DIM needs to be removed for this code to work properly.

<%
Dim BannerZone, BannerConnectionString, BannerDatabaseType, ConnBannerSystem
Dim CmdCheckUser, CmdGetConfiguration, App_Name, Config_SQL, BodyTag, BanDataConn
Dim CmdBannerTemp, CmdGetZones, ZoneString, ZoneArray, ZoneIndex, CmdUpdateWaiting
Dim CmdUpdateExpired, CmdRetrieveImpLimitedAds, CmdRetrieveImpressions
Dim CmdUpdateImpHit, CmdRetrieveAds, CycleBannerTotal, CycleList, NewCycleList
Dim Dim LoopBanner, CycleLoop, CycleListArray, CycleListArrayIndex, BannerCycleData
Dim Banner_Array, CurrentBanner, NewCycleListArray, Banner_Array2, LocationIndex
Dim Stop_Processing, Keep_Processing, CmdUpdateStats
%>

We have been using ASP Protect for a while now and are big fans of the program.  We received ASP Banner 8.2 with our puchase which we now have a need for.  I went to put the files on our webpage, and doing nothing else other than locating the directory there, I noticed differences with how ASP Protect operates.  We have customized it a bit and want to keep the 2 programs separate.  the login screen for one showed up on the other, and some ASP Protect pages appeared altered so i immediately deleted ASP Banner.  did I do something wrong, and how can i ensure the 2 programs work completely independant of each other?  We can't risk braking what we're now using but would really like to add banner functionality to some of our pages.  maybe an update to the program before we install?  puchase new software?  Thanks for your help-

Here are three known bugs and their fixes...

If you have any of these symptoms these fixes will most likely take care of them.
If you don't have a symptom do not make any changes as you most likely have an updated copy of the application.

Technically if you bought that app on or after April 27th 2004 these bugs should all have been corrected.

Description Fix

(no descriptions showing in pop up window)

Edit pic_window.asp with a text editor

Change

Set f=fs.OpenTextFile(Server.MapPath("pictures/Album_ID_" & Album_ID & ".txt"), 1)

To

Set f=fs.OpenTextFile(Server.MapPath("../pictures/Album_ID_" & Album_ID & ".txt"), 1)

Slideshow Fix…

(last image in slideshow it not showing)

In slideshow.asp

Change

<% For PicArrayIndex = 0 To Ubound(PicArray) - 1 %>

To

<% For PicArrayIndex = 0 To Ubound(PicArray) %>

Add To Favorites fix

(add to favorites feature doesn’t work at all)

Edit "album_uppermenu_inc.asp" in the scripts folder

Change

<a href="users/favorite_albums.asp?Album_ID=<% =Album_ID %>"><img border="0" src="<% =application("skinpath") %>add_to_favorites.gif"></a>

To

<a href="users/favorite_albums.asp?Album_ID=<% =Album_ID %>&Action=Add_To_Favorites"><img border="0" src="<% =application("skinpath") %>add_to_favorites.gif"></a>

Your probably talking about "Session.Timeout" which is a feature of the IIS webserver. Please do a google search on it for more information.

In the meatime if you look at the top of the "check_user_inc.asp" file you should see a section like this where you can try to change the value.

' Minutes you want before the session times out.
' This is set on the server to be default to 15 or 20 minutes depending on the server version
' You can change it there or override it here.
Session.Timeout = 30

Specifying it like that is supposed to overwrite the value for your web in the IIS console which is usualy 20 minutes.

  Hi, we purched ASP Protect a few months back and had it installed on our hosting company under a "temporary" domain name -- cidrasensors.com

We are now about ready to switch this development site over to production and I need to change the domain from cidrasensors.com to cidra.com

My hosting company wants us to create a new accounting and re-set everyting up.

So...based on this, I have a few questions for you:

1. Do I need to re-install the software? or can I copy from one account to the other?

2. Assuming I can copy the software to the new account - are there changes that will need to be made to point to the new domain?

3. If I decide I wanted to keep the first account alive for development purposes (never turn on the website domain to the public) - would I need to have a seperate ASP Protect license? 

4. If I decided to ask you to do the transfer for us - is that covered in the $20 Installation fee I saw on the web?  

Ok i am having an issue with my other comp. I have spent ANOTHER 3 hours researching this one.... it WONT START THE IIS SERVICE!!!

I get this error:

The service did not respond to the start or control request in a timely fashion

ANYWAY---

I decided to use one of my client's hosts; which happens to be Network Solutions.

ANYWAY again-

I uploaded the whole thing there and they advised me they cannot do the explicit permissions on that _database folder. This is what they said: I would also would like to point out that ASP.NET applications and permissions do not extend to any other folder, other than the root, (/htdocs/), and the bin, (/htdocs/bin/) folders.  Sub-directories and folder after bin and htdocs will not have ASP.NET permission (read or write).

If you could move or reconfigure your application to save all your code behind, include and dll files onto the root or bin folder, your application could work or possibly run as you would expect.  Please have this done and retest your application. If and when you get a different problem or another error after doing so, please let us know, and we shall be happy to help you troubleshoot any problems that you may have.

There is a 'create database option'  where i can create a database..create a dsnname, user name, password and have to specify the database file name. Once i do this i need to place the database file (aspprotectnet2002.mdb) in the /db folder within the root. I also tried this and made the appropriate change in the web.config but it STILL DOES NOT WORK. I AM PULLING MY HAIROUT WHY WONT ANYTHING WORK.

ALL THE FILES ON ON THE ROOT OF THE WEB HOST. I PULLED THE FILES OUT OF THE _DATABASE FOLDER AND DUMPED THEM ON THE ROOT. I CHANGED THAT ON THE WEB.CONFIG BUT ITS STILL LOOKING FOR SOME .XML FILE IN THAT _DATABASE FOLDER.

I'VE BEEN TRYING EVERYTHING AND IT SEEMS THAT I CANT USE THIS SOFTWARE FOR THE LIFE OF ME

I would look on the pictures folder on the server and see what is there for pictures. Also, when you see a broken X on the site right click and see where it is trying to get the picture from and what the pictures name should be.

I would also be sure to clear out your temporary internet files in IE. clost and restart all browsers..

maybe show me the site ? so I can see this happening ?

Editing using Visual Studio.NET

Here are directions for editing the application using Visual Studio.NET
2002 or 2003 version.. either should work

Some of you are wondering why I didnt just give you the project files.
It is best you go through this process and really understand what is going on.
Also, I dont use VS 2002 so I wouldnt be able to give you project files that would work with that. Not to mention there is 100% chance my prject files wouldn't work for you anyway because of path differences and other things.


Anyway.. on with the instructions...

1st.. make sure IIS, ASP.NET, .NET Framework, and Visual Studio.NET are all installed correctly and up to date.

Open Visual Studio.NET

File -  New Project

Select a New Visual Basic ASP.NET web application.

give the new web to be created a name.. I called mine "aspprotectdotnet"

Hit Ok..

Now. once the project opens up we need to delete a few things in the solution explorer window.

So delete "webform1.aspx" , "deletestyles.css", "Global.asax", "AssemblyInfo.vb", and "web.config"

Basically all the files under the project...

Now... you should have the aspprotect.net files unzipped somewhere on you hard drive...

open that folder and select all the files and folders like so




Now drag those selected files and folders to the solution explorer window of Visual Studio.NET right on to the name of the web. In my case "aspprotectdotnet"

It might say this folder already contains a folder names Bins.. just tell it to copy over and continue on any prompts like that.

You'll notice your project is now populated.

Open up the references tab in the solution explorer window as we need to add some references to the dlls in the bin folder of this project. This is needed so the compile process and function correctly.

Right click on references.. click add reference
Then browse....browse on your hard drive to the location of the new web and the bin folder within it. 

In my case... "C:\Inetpub\wwwroot\aspprotectnet\bin"

Choose "aspprotectlicense.dll"

Hit open...

Now do the same thing again until you have added all the dlls in that bin folder to the references.. 

Now.. click add-references again and this time choose
"system.management" from the choices in the .NET tab

Once all of that is done your references should look like this




Now in the Visual Studio.NET menu system up top..

Choose Build - Build Solution

If you did everything right you will see something like this in the build window

------ Build started: Project: aspprotectdotnet, Configuration: Debug .NET ------

Hi Chris,

The password is HANNAH.  If you're into trouble shooting mode and would like the key, I can send it to you.  If not, no big deal, I've email the guy a new password.  We'll see how many rounds it takes him to get it right. 

Thanks,
Mick

Christopher

Many Thanks

Seems like its working just got to test it bit to see, though it wasnt going to work as I had one too many End If's after the last part of the code you done for me. But even I eventually sussed it, nothing to do with your bit just another mistake on my part

Great to get support like this especially on a Saturday

regards

John

Hi Chris:

Is there a way I can include the username and password in the URL of a protected page to gain access to a that page without going through the log-in page?

I'm not quite sure what the syntax would be in the URL.

Warren

you basically have to edit the html in the links in the various pages and remove them... some are in includes files

use a text editor and be causious / back things up before you remove links so you can revert back

This may be an old question ??? If it is please point me to the post or documentation where I can find the answer please.

When creating protected pages I am using the following to protect them:

<%@ LANGUAGE="VBSCRIPT" %>

<!--#INCLUDE FILE="/aspprotect/check_user_inc.asp"-->

But that is not working. I get the following error when I try to access the members logon page in the directory that I wish to add the pages to:

Active Server Pages error 'ASP 0130'

Invalid File attribute

/filelocation/filename.asp, line 3

File attribute '/aspprotect/check_user_inc.asp' cannot start with forward slash or back slash.

However if I create the pages in the root of the AspProtect directory and use a link to the same page that exists in the AspProtect directory and the following include:

<%@ LANGUAGE="VBSCRIPT" %>

<!--#INCLUDE FILE="check_user_inc.asp"-->

The pages work fine.

I really do not want to put all of my protected pages in the root of the AspProtect directory.

 I would like to mix protected and unprotected pages throughout the site in order to #1 make it easier to administer. #2 keep the AspProtect directory solely for authentication. And, #3 keep any user authentication pages out of the AspProtect directory.

TIA