You edit the web.config file that came with ASPProtect.NET.

You find this tag

  <customErrors mode="RemoteOnly" />

you change it to this

  <customErrors mode="Off" />

If you have a different web.config file in your root I suggest you make sure the tag is set to off there as well for troubleshooting sake

If done correctly you will get a detailed error
It's basic low level ASP.NET stuff really and does not have anything specific to do with ASPProtect.NET.

You also need to make sure your web is set up correctly for ASP.NET and that the correct web.config's are firing..etc etc

Chris,

I have had a couple of users log out of the system as they are supposed to, move to another computer and not be allowed to login because of "they are currently logged in using another IP address" when in fact they logged off properly.  Is there anything that they should be doing differently?

Thanks,

Jess

For some odd reason, the the export path has two backslashes (\\) at the end, thus generating an error each time I try to export. For example

C:\path\website\protect\data\export\\

This appears toward the bottom of the import_export_manager.asp page and is called by =ExportDirectory.

I checked under settings tab, no path ends with a "\". Any idea where else I need to look?

Nick

All can say right now is take a break and get away from it for a bit. All your going to do is stress yourself out more if you keep working on it.

There is probably a way to make it work but it may require days of fiddling around and reading articles and trying things and even then you may not get it working AND THEN ITS JUST A BAD IDEA ANYWAY. Like John says you are better off running it on a server that is not a domain controller.

one last thing... if you did an upgrade from a previous version and didnt do the whole database field thing right during the upgrade process as stated here you could have trouble.
http://support.cjwsoft.com/code/moreinfo174-1.htm

Meaning you should check your new database with the field structure of an unmodified new database and make sure all field names match up perfectly.. especially paying attention to the username and password fields

One last thing..
If you did an import via text file and didn't import all the fields ASPProtect needs you could possibly have problems as well.. though I don't think this relates to the timeout so it probably is not the case

Every application we sell that has a password on the database uses "temp"

Also, the password is in the connection string in the dataconn_inc.asp file.

After all, the ASP code needs to know the password just like anyone that wants to open the database would.

[/QUOTE]

That i have, my question revolves around the all the users and passwords that I in that database. I need to be able to export that list to word for a mail merge list, but when I do the passwords show up encrypted. I need to be able to get an unencypted list.

thanks

This may be an old question ??? If it is please point me to the post or documentation where I can find the answer please.

When creating protected pages I am using the following to protect them:

<%@ LANGUAGE="VBSCRIPT" %>

<!--#INCLUDE FILE="/aspprotect/check_user_inc.asp"-->

But that is not working. I get the following error when I try to access the members logon page in the directory that I wish to add the pages to:

Active Server Pages error 'ASP 0130'

Invalid File attribute

/filelocation/filename.asp, line 3

File attribute '/aspprotect/check_user_inc.asp' cannot start with forward slash or back slash.

However if I create the pages in the root of the AspProtect directory and use a link to the same page that exists in the AspProtect directory and the following include:

<%@ LANGUAGE="VBSCRIPT" %>

<!--#INCLUDE FILE="check_user_inc.asp"-->

The pages work fine.

I really do not want to put all of my protected pages in the root of the AspProtect directory.

 I would like to mix protected and unprotected pages throughout the site in order to #1 make it easier to administer. #2 keep the AspProtect directory solely for authentication. And, #3 keep any user authentication pages out of the AspProtect directory.

TIA

Hi,

I wanted to see if you had any suggestions for converting from Access to SQL sever database. I attempted this earlier today performing the following steps.

1) Create SQL Tables using Enterprise Manager / SQL Scripts
2) Use DTS to move all of the existing table data to the sql tables.
3) Update dataconn_inc.asp to use SQL and the required connection string.

When these steps were complete I was able to login to ASPProtect as an admin and search / find both groups and users. However, any attempt to edit or create users resulted in a "the page ... had a problem ... " type problem. It seems that I can read from the db fine but and getting errors writing to the tables. The user id that is being used to connect to the db is the [dbo].

Any additional hints for this procedure?

Thanks

Darrell

i took another look at the file, and realized that when i was looking at the data structure i had confused "banner_image_URL" with "banner_link_URL". i lengthened the latter, and now all is good.

sorry for the false alarm, and thanks for a very-to-work-with product.

See, and that's what I thought.  What's interesting is that if I call either an aspx page or an asp page in the iframe tag, it asks me if I want to open the page, it doesn't display it.  I'm using IE6 so there's not problem with the support for the tag.

I'll keep looking to find out what's going on. I think the iframe method might work best.

JDooley

Hello

I have a strange problem with the thumbnails in the ASPClassifieds.
If i upload some pictures in an ad, the 2nd picture always shows with an x, as the picture doesn´t exists. But if i click on the 2nd thumbnail, the picture shows okay. I haven´t changed enything from the original code.
Does anyone have any idea, where it goes wrong ?

With best regards, Erling Larsen

Everything is running fine.. I can read ads... reply to them. but when I click sign in or register.. I get a server error.

Any suggestions

Thank You

When that link is clicked on it will then track the click and redirect the user to the “link url” specified for that banner. 

The system actually generates the necessary ASPBanner URL for you. That link is shown on the banner edit screen.(you must save the banner at least once and come back to that screen to see the link though) 

Really the best way to show it is with an example as seen below.

Basically the flash banner file "powerasp.swf" highlighted in green needs to be edited to link to the banner redirect url which is highlighted in red.... the banner redirect url will then track the click and ultimately send the user to the Link_URL highligthed in blue.

All banners systems work this way when it comes to flash files.
It’s the nature of flash and the web browser, 

The flash source code must be edited to link to the redirect url in the ASPBanner system. There is no possible way any banner system can track a flash click unless the flash file links to the banner system 1st.... because that click is handled by Flash and the web browser. 

In some cases if you do have the original source file for the flash banner then you are out of luck as far as tracking clicks goes.



On a side note... if you create flash banners the way this article says you can actually feed a .swf flash file a link for it to click to. Instead of it being hardcoded.

http://www.macromedia.com/resources/richmedia/tracking/desig ners_guide/index.html

This is really the way everyone should design their flash banners from now on because the url it links to can be easily changed at any time without editing the flash file source code. 

I think its great to share a mod.

I will have  few with the new album.

I believe what happened is we received the older copy of ASP Banner iwht our purchase of ASP Protect and were notified of a free update to download aspbanner_unlimited_v8.2_feb_26_2005.zip which we did, and that's the one i recently put on our site.

  Sounds from your reply that something technical is going on to the point where I will have to hire one of our Web consutants to dissect for us.  We'll try again and track our issues and send another request for information when we can show you a specific example of what is happening.  I'll be in touch.

The "forgot your password" feature is not sending passwords to users when they put in their emails.

Any suggestions?

Thanks

can add photo album but after i upload a pic, nothing shows.

where do i look to research why pics aren't showing in the albums

I did everything mentioned here but it do not work ;(

sure (XP PRO), see my article on that

http://www.powerasp.com/content/new/windows_xp_pro_and_permi ssions.asp

• What kind of encryption do you use with version 7?
• If I purchase version 7 and use it on my site with a new SQL database then migrate the old records from version 6 so I can by-pass the issue with my home-grown Base 64 encryption, do you forsee other issues with the upgrade?

http://support.cjwsoft.com/code/moreinfo286-2.htm

http://support.cjwsoft.com/code/moreinfo391-1.htm

http://support.cjwsoft.com/code/moreinfo385-1.htm

Christopher

I have gone back to your original files and uploaded them to another server folder and instead of using a DSN I have tried this with a DSN less connection and changed the database to MS Access 2002.

This has corrected the problem.
I will check this out again using the DSN with access 2002 to see if this was the problem. It may be something to do with an older format of database on this particular server.

I will let you know what I find.

Thanks for your  quick reply.

Is there an easy way to make this work with reoccurring a monthly or yearly subscription?

... in addition it is a virtual include not a file.  I just tried to use file instead of virtual and then the ../ includes worked on the asp pages.

This is strange because they used to work like that on the 2000 server I had these sites running on.

Hi,

Sorry, but if  ".asp" pages download instead of run on a server then that means ASP is not working on the server and is not configured correctly. That is about as low level as it gets and it is really the hosting companie's responsibilty to sort that one out.

It is totally a system admininister's job to make sure that sort of thing is working. If this place supports ASP they really need to fix that for you. There really is nothing  I can do for you until ".asp" pages at least run.

As for the Free install... that is no problem. Of course you need to get the hosting company to fix the web before I can be of any help. There is more to that problem then permissions.

For starters I would make a simple ".asp" page with hardly anything it (even some simple html text is fine) and ask them why it is downloading instead of executing and to please fix things.

I just took a look and that is definetly what happened.
It has nothing to do with the registration process as far as I can see.

Just running this page triggers it and I know it does not do that the way it comes.
http://www.myvirtualtutor.com/aspprotect/users/user_area.asp

Please back up what you changed and put the user area back the way it came..

If error still happens then I can help you.. It it works fine with the default files from the zip archive then you messed something up in the code.

You have to be really careful when working with ASP code.

Also: just in case you did this. " you should not be password protecting any files in the users area that are already there " the users area does it's own thing and there is no reason to be doing anything like that to the files that are already there. You can do whatever you like to files you add on your own.

I did try to redit the banner and the old link was there, not the new one.  In addition I tried to ad a new banner to an account but it too was not saved.

Since I can see the banners from the aspbanner solution, does that not tell me that the solution is properly connected to the database?  The only thing is the solution only appears to be able to read the data and not write or delete it.

The settings for the directory are read write execute and delete so I am not sure what I need to do to get it working again

ok