I got ya. Well hey, that's what's great about the iframe right?

Chris,

I understand.  I set it to a lower number that will hopefully be a good balance for the user.  I am simply AMAZED at what your software does and I thank you for all you have done.

Jess

Does emailing work under the simplest scenario ? (directly from the users screen)

Thats the way to test it..

All that error means is whatever reason the settings you have chosen are not working. It could be the server. It could be what you chosen. (and yes I realize your pop info from outlook should probably work with the settings you chose)

Whenever I do installs I often have to try 3-5 different emailing scenarios before I come across one that works.

Each time making some changes and sending out test emails from the users screen until I get somewhere. Often time getting a working example of how your Hosting Company wants you to send email from ASP is the info to get your hands on. (what method and settings)

In this case they may have blocked the usee of a remote server and want you to use some other settings for sending email from asp. A lot of times they put that info in their help system.

If I were you I would start by trying the other two CDOSYS options for starters, and then try the remote server option again but using "localhost" as the server, if none of those work consult your host for example code and settings to send email from asp. If you still have no luck I can help for sure.

Realize too when testing the emails may take a bit to arrive. A delay of sorts. Best to type in a quick note about which method you are trying in the email text. That way when you finally get one delivered you'll know which method worked.

It seems that if a user attempts to access a page that is not in their access level or they do not have the group permission they are redirected to the login page.  Re entering their ID generates an eror and they cannot go back to the pages they are alowed to access.  Is there a way for them to simply be blocked and return to the previous page or to a defined page so they can continue using the site?

thankyou 

Okay, this also shows at the bottom of the import/export page

I've got the IUSR account with modify permissions on this data folder as well.  Is the "this directory needs change permission" line just a general reminder?

Files are being stored in "D:\missourirealtor.org\members\aspprotect\data\export\\"

This directory needs change permissions for the anonymouse webserver account.
Those permissions can only be set by your hosting company.
These features will not work without those permissions being set.

If you have an album with more than 96 pictures, the spacing in the tables can become incorrect, with pictures touching each other. (This program is not designed to handle more than 96 pictures due to server speed, but it can handle more than 96 with minor changes to the code.) Also, after 96 pictures, the pictures will not have 6 on a line, but rather 6 on a line up to 96 pictures and then the rest of the pictures on one line next to each other extending to the right of the screen endlessly. To fix this, I simply edited the ASP code using the following loop. It can be a perminent fix, because I used the maxpicsperalbum variable to define the spacing.

<%
Dim SixInterval
For SixInterval = 2 to maxpicsperalbum
 SixInterval = SixInterval + 5
%>
 <% If PicIndex = SixInterval THEN %> 
  </tr>
  <tr>
 <% End If %>
<% Next %>

Then, the following code must be commented out:

<% If PicIndex = 6 or PicIndex = 12 or PicIndex = 18 or PicIndex = 24 or PicIndex = 30 or PicIndex = 36 or PicIndex = 42 or PicIndex = 48 or PicIndex = 54 or PicIndex = 60 or PicIndex = 66 or PicIndex = 72 or PicIndex = 78 or PicIndex = 84 or PicIndex = 90 or PicIndex = 96 Then %>
 </tr>
 <tr>
<% End If %>

This code can be found in scripts/view_album_style*STYLE NUMBER*_inc.asp . (STYLE NUMBER depending on which style you are using (found in config file))

This change in code will enter a new table row after each 6th picture. You can have more or less than 6 pictures per line depending on the width of your files and preference by changing  changing the number 5 in this line of code: SixInterval = SixInterval + 5

If you have any questions, JPortnoy@Checkernet.com

Hi all,

I have the photo gallery set up at www.kashabowieoutposts.com/gallery

It's great - love to work with it.

But I've never been able to get those with just User permissions to be able to upload... Only an administrator is successful in uploading.  This was no problem in the past, but now this client would like to give their guests a means to share their pictures on their site - so now I have to figure out the bug...

... this is the error I keep getting...

Your upload did not succeed, most likely because your browser does not support Upload via this mechanism.

Your browser must support a standard called RFC 1867. Please check with your browser vendor for support of this standard.

------- anyone else experienced this?

Many thanks all!!

Doug

I am an experienced ASP developer. Can you tell me whether this would be a very involved process, or whether it is pretty straightforward? I don't yet have a merchant account, so I am not yet familiar with any aspect of accepting credit cards online.

Thanks.

Chris, I'm having problems getting this to work. When I plug in the redirect URL and then try to load the web page, the Flash ad never loads successfully - just its black background in the 468 x 60 space. Here's an example of what I'm seeing:

http://www.innovationtools.com/Articles/ArticleHeadlines.asp

Just keep refreshing the page until the black rectangle appears. And here is the code I've loaded for this flash ad:

<OBJECT classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
 codebase=" http://active.macromedia.com/flash2/cabs/swflash.cab#version =4,0,0,0" ID=banner WIDTH="468" HEIGHT="60">
 <PARAM NAME=movie VALUE=" http://www.innovationtools.com/aspbanner/aspbanner/banner_re direct.asp?Banner_ID=25">
 <PARAM NAME=quality VALUE=high>
 <PARAM NAME=bgcolor VALUE=#000000>
 <embed src=" http://www.innovationtools.com/aspbanner/aspbanner/images/ba nners/mindmatters_innovation3.swf "
quality="high" bgcolor="#3CBDCD" WIDTH="468" HEIGHT="60" TYPE="application/x-shockwave-flash" PLUGINSPAGE=" http://www.macromedia.com/shockwave/download/index.cgi?P1_Pr od_Version=ShockwaveFlash">
</OBJECT>

What am I doing wrong? By the way, I'm using the standard version of ASPBanner. Not sure of the version, but it dates from about 2002.

If you are using version 6 CDOSYS is not supported. That is one reason why version 7 came out. If you want to rewrite the code to work with CDOSYS in version 6 that is something you need to sort out on your own as I do not support custimization to the code.

check the action for the button in the code... its probably not posting back the the right page which should the same page it is...

I bet ya it is posting to guestbook2 which is the wrong directory... an old mistake I forgot to correct...

There is no way I'm going to spend hundreds of dollars for a thumbnail creation program. Mine is a family web site and all out of my pocket.

Is there any free products that work with Gallery that will create the thumbnails? If not can I create them on my own and link them to the pics? There are tons of Perl based freebies out there.

Steve

I think I've found the problem..

The password "abcdefgh" works

The password "abcdefghi" does not

(username "ace45")

Passwords can obviously only contain up to and including 8 characters... By some coincidence I only used short passwords with MS Access.

I have an asp page that includes other asp pages via an include.  for example:

snippet code: file name: collaboration.asp

 <table bgcolor="#bed1e4" border="0" cellspacing="0" cellpadding="10" marginwidth="0" marginheight="0" leftmargin="0" topmargin="0"> 
    <tr>
    <td>     
     <!--#include file="../../../filetransfer/directory_listing2.asp" -->
    <BR><BR>
     <!--#include file="../../../filetransfer/upload.asp" -->
    </td></tr>
   </table>

I can add the code below to collaboration.asp and it seems to work,but I cant seem to figure out how to protect the other files such as upload.asp at the same time. -- can you help?  - Note: as soon as I add the code below (and adjust the path) - I cant bring up the page.

This is the protection code I am using.

<!--#INCLUDE FILE="../../../../aspprotect/check_user_inc.asp"-->

Shirely

Session.LCID = 2057

I just told you a lot of different things to try... and I doubt you have tried them in the time since I mentioned them

Look in the "check_user_inc.asp" file..

You'll see the name of the cookie there and also get an idea how to access it.

In most versions it looks like this.

Request.Cookies("PASWORDSYSTEMCOOKIE")("COOKIE_USERNAME")

You'll want the cookie for the username because the session variable will not exist unless they have actually gone to a protected page during that session at the site.

It would probably be best the check for both the session and the cookie. That will make sure people logged in that arent using the cookie option still see the message you want to display.

Sorta like this..

GetUsername = ""
If Request.Cookies("PASWORDSYSTEMCOOKIE")("COOKIE_USERNAME") <> "" Then
GetUsername = Request.Cookies("PASWORDSYSTEMCOOKIE")("COOKIE_USERNAME")
Else If Session("Username") <> "" Then
GetUsername = Session("Username")
End If

Response.Write GetUsername

The problem was in config_inc.asp. we had renamed the field in the DB but didn't change it in this file.

But we changed it, it is back to normal.

Thanks

My hosting company uses ASPEMAIL - and I am trying to setup the mailing settings on ASPPROTECT - but cant seem to get it to work.   I've tried many different options - here are two that are the closest - but have issues:

1. If I use the settings:

email component: aspemail

Mail remote server: my internal server name

*no smtp authentication

email mail notification - my email address on my internal server

***I get the following results:

       I can get get notified when a new user logs in, email a user from aspprotect user screen if they are in my company and have a valid email -- but I can not send to the outside world - I get an relay prohibited error.

2. If i try to change the setting to use the Hosting Website email server - I get the following results:  I dont get notified when a new user registers, I cant send to internal company people - but I can send to the outside world.

**any suggestions on what to do? I'm trying to work with the people who manage the mail servers - but since I dont know anything about them - its a bit difficult.

Thanks very much for the quick reply.

That sets my mind at ease

I was just worried if users would see warnings in their firewall software too.

I realize that the admin would have to have to go through some errors...

And since we are throwing things in here... Definately, if you have your own server you need a Hardware Firewall and a Managed one at that. The internet can be pretty dangerous for business if you don't.

Plus, I agree Black Ice although in it's heyday a few years ago was considered great. It is not suitable for todays standards alone even for the normal user (But, it is required by the company I work with for VPN. I think it's stupid too using old technology. I have 2 more firewalls setup besides that just so that I do have some security. And, that's just for my PC)...

Thanks 

Upgrade from V6 to v7.x with an MSACCESS DATABASE

1st of all, backup your existing ASPProtect files and database before performing this upgrade. Please be really careful while performing this upgrade. Version 7.x  is a highly advanced application compared to any previous versions. CJWSoft under no circumstances is responsible if you lose information or have website downtime.

BOTTOM LINE: (PERFORM THIS UPGRADE AT YOUR OWN RISK)

To do this upgrade you're going to need to have the Microsoft Access Application.
To work with an Access .mdb file it can not be newer than the version of Microsoft Access you are running.

That being said, on with the upgrade..

Open you're existing Acccess Database up in Microsoft Access..
You should see this something like this.



By right clicking on then choosing rename
Rename "Users" to "ASPP_Users"
Rename "Groups" to "ASPP_Groups"

If you do not have a "Groups" table do not worry about it right now.

Now right click and DELETE the Config Table.
Yes, delete it..

You should now see this. (with or without the "Groups" table)



Now, right click on "ASPP_Users" and go into design view.
It should look like this.


Rename the "Password" field to "Old_Password"
Be sure to spell it perfectly using the Underscore
It will look like this.


Now scroll down to the bottom a bit It should look like this.



Now..

If you have a "Groups" Field... leave it alone
If you do not have a "Groups" Field add one and make it a memo field.

Now, we are going to add a few more new fields.

Add a field called "Redirection_URL" make it a "text" field with 150 field size
Add a field called "PayPal_Subscriber_ID" make it a "text" field with 100 field size
Add a field called "Newsletter" and make it a yes/no field
Add a field called "Password" and make it a "text" field with 100 field size

It should now look like this.
(you do not need to worry about the field descriptions.. that part is optional and only seen when working on the database)



Now close that window and save the changes..

Your now going to open up another Access Database while still leaving the one you have on your screen open. You going to open up one of the new databases that came with v7.x. This database has some info we are simply going to copy and paste.

You'll want to open it and put it side by side on your desktop like so.
(the old database is on the left.. the new one is on the right)



Now, for the fun part.

On the new database to the right.. right click on the "ASPP_Config" table and pick "Copy"

Then move your mouse over to the old database on the left. Right click in the open white area and click "paste"

It will ask you for a database name. Type in "ASPP_Config"
Leave "Structure and Data" checked and hit OK

Your old database on the left should now have a nice new "ASPP_Config" table.

OK, now for the "ASPP_Groups" table

If you already have a "ASPP_Groups" table in your old database you are done.

If you do not have one your going to copy and paste the table from the New Database to your old database just like we just did with the "ASPP_config" table.

Your old database should now look like this.



Now, you are done upgrading your database from within Microsoft Access.

The existing passwords still have to be encrytped and moved from the "Old_Password" to the "Password" field

To that we have a special page we run in the application that will take care of that.

So, for now... go install the application, but using the database we just created.
Follow these instructions for the most part...
http://support.cjwsoft.com/forum/forum_posts.asp?TID=181& ; ;PN=1

When you get to the part where you finally get into the admin area and need to make an admin account you will notice that your existing user database is there but none of the users have passwords if you look at them in the edit screen.

That is normal. Simply do what the instructions say and create and admin account using a username that does not exist..

Then log off... then back in as that new admin account. If that works you are ready to convert the passwords.

This part is very easy.

You want to run a special page via the browser.

http://www.mysite.com/password_admin/convert_to_encrypted.asp

Replacing the part in blue with your website info.

Once you get the page running you will see a login prompt and one form field just like before with the "get_me_in.asp" page

You will need to paste the "PasswordEncryptionKey" value that you used in the "config_inc.asp" file in the form field and hit enter.

If all goes well you will see a page telling you to click here to encrypt the passwords and copy them over.

So do what it says... dont click more than once and wait.

Eventually it should say it is finished. So go log in to the admin area of the system using the new admin account.

Now edit some users but dont save... you want to see if the passwords are showing up. If they are the conversion worked. If you see nothing or a garbled mess it did not work and you made a mistake during this whole process.

If things went well backup and delete the conversion file below.

http://www.mysite.com/password_admin/convert_to_encrypted.asp

You do not need it anymore.

Once you are positive every thing is running smoothly and everyone's passwords are ok you can go in and delete the "Old_Password" field as well.



If things didnt go well.. try again from scratch and go slowly.
If they still dont go well get ahold of us for help.

We are here to help, but if you really want us to we can be hired to do the conversion.

Okay Chris, I wold like to get rid of the encryption then if it's not too much trouble.

I have no option of running the production server against an ms access db, since the db needs to be online and accessible from another system.

[QUOTE=cwilliams]I would like to delete the SQL tables and set them up from scratch using enterprise manager and sql query manager and see what happens

If that is ok with you let me know.

Something is wrong like I said...  almost seems like the database is caching old password info from the field.[/QUOTE]

Sure go ahead

is that lindsey lohan and her fake boobs as ur avatar?

I am installing IIS and all of its glory on the other computer now... gotta love remote desktop (the pc is at work  )

Christopher

Thanks for a speedy reply.  This is what I have used most recently...

ListingsConnectionString = "DSN=longreach;UID=lradmin;PWD=skipper;"
DatabaseType = "SQL"

but that throws an error of:

 [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

I have private messaged you my SQL server IP address.  I am a fast learner with ASP (I think!) but some things really catch me out!

Are you reffering to the number of the left of the users name in admin.

I thought it was a counter at first but that number only displays the number of albums they have set up.

While my host says the permissions are now correct....its still trying to download the setup ASP file instead of executing it.

I really need to get this application working asap too.  I noticed the purchasing page said that install came free.....so any help would reaallly be great.

re

<!-- Web.Config Configuration File -->

<configuration>
    <system.web>
        <customErrors mode="Off"/>
    </system.web>
</configuration>

<!-- Web.Config Configuration File -->

<configuration>
    <system.web>
        <customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
    </system.web>
</configuration>

Encountered another issue.  When entering a user name correct but the wrong password get the following error:

Microsoft OLE DB Provider for ODBC Drivers error '80040e14'

[Microsoft][ODBC Microsoft Access Driver] Syntax error in string in query expression '(Username = 'ROBERT') AND (Password = 'ZŁ$'.

/check_user_inc.asp, line 115

Did I do something else wrong?!

Thanks