Session.LCID = 2057

I am in process of upgrading from v6 to v7.  I have made database changes, can connect to database and get in to Administration area just fine.  However when I go to create a new user I get the following error

ADODB.Recordset error '800a0cc1'

Item cannot be found in the collection corresponding to the requested name or ordinal.

/password_admin/save.asp, line 227

Thanks

Does emailing work under the simplest scenario ? (directly from the users screen)

Thats the way to test it..

All that error means is whatever reason the settings you have chosen are not working. It could be the server. It could be what you chosen. (and yes I realize your pop info from outlook should probably work with the settings you chose)

Whenever I do installs I often have to try 3-5 different emailing scenarios before I come across one that works.

Each time making some changes and sending out test emails from the users screen until I get somewhere. Often time getting a working example of how your Hosting Company wants you to send email from ASP is the info to get your hands on. (what method and settings)

In this case they may have blocked the usee of a remote server and want you to use some other settings for sending email from asp. A lot of times they put that info in their help system.

If I were you I would start by trying the other two CDOSYS options for starters, and then try the remote server option again but using "localhost" as the server, if none of those work consult your host for example code and settings to send email from asp. If you still have no luck I can help for sure.

Realize too when testing the emails may take a bit to arrive. A delay of sorts. Best to type in a quick note about which method you are trying in the email text. That way when you finally get one delivered you'll know which method worked.

Your actually confusing me with the whole "joe bloe" thing and user access. I just do not get what you are trying to tell me. Perhaps you can explain in a less confusing way. Your just not technically explaining it andand thats what I need to know to possibly help.

As for the subweb thing you just can not do that. Subwebs have their own sets of application and session variables. An ASPProtect installation and any pages you protect with it are required to be in the same "application" in IIS. Sicne subwebs have their own "applications" in IIS that won't work. It is the nature of "forms based authentication" A sub web is alo considered by our licensing to be a seperate web site and ASPProtect is licensed per web site.

As for breaking pages.. you really shouldnt be editing any pages in the admin area as you will break them unles you are very good with ASP. (does not sound like you are..no offense meant at all)

Pages in the "users" folder are less complex and it is usually ok to edit them carefully.
http://www.powerasp.com/content/hintstips/common_sense.asp

Pages of your own that you password protect can still be edited in your usualy way though without effecting anything.

Truth is if you back things up before you start editing how can you go wrong ? That's how you learn.

Adding Support For ServerObjects ASPMail

ASPProtect as you know does not support ServerObjects ASPMail component by default.

Here are directions to make it work.

In the ASPProtect admin settings area simply pretend as if you are using the softartisans sasmtp mailer component. ASPMail and that sasmtp component share the same properties… and the code used for them is nearly identical.

So search through the code for any place where email is sent and simply change

Set Mailer = Server.CreateObject("SoftArtisans.SMTPMail")

To

Set Mailer = Server.CreateObject("SMTPsvg.Mailer")

It is about 4 places. They are not too hard to find.

That’s the easy way to get all the emailing functions working with ASPMail

This first one may be an obvious one, but is it only .asp files that I can protect as in no HTML files.

Can the program be set to protect my whole https directory contents (though the answer to the last question may have bearing here - there are html files as well as .asp in there) as in http://secure.mydomain.com

Thanks in advance

Hi,

That is not enough to go on. I need details in order to help.

I'am in the process of modifing registration and tieing in paypal. When I get live I will send you a link. Thanks for help.

John

Chris,

I understand.  I set it to a lower number that will hopefully be a good balance for the user.  I am simply AMAZED at what your software does and I thank you for all you have done.

Jess

humm, yea thats a data connection error..
really not related to the asp code in the application for the most part.

that is low level

If using MSACCESS

I would make sure permissions are set correctly on the database folder (not just the database file itself)

I would make sure your using at least a 2000 version of the database. 2003-2003 format being better.. 

I would make sure the server has up to date mdac/odbc drivers.. (that is really the server admins responsibility)


As for permissions there are articles in our forums about exactly how they need to be set. Improper permissions can cause a ton of random errors like that.

I just installed the software, but I can't find any place where I can see when users logged in, can someone please tell me where I can do this?

Thanks

if that account isnt there thats normal because if it doesn't have any permissions for that folder so it wouldnt be listed

you simply dig into the menus a liitle deaper and find it then add it.

Hi

I've tried almost anything here... I'm using an online SQL SERVER database with ASPProtect 7, and I can't login after my initial creation of the admin account.

It works fine with Access... I believe I have checked all the fields created by the sql statement (which was run with no errors),

What could be the problem here? could it be a problem that I run my local IIS against the online sql server?

sincerely,

Morten

I would also double check that you changed the field size correctly and on the correct database that is being used in the connection string

Sorry, I forgot about that when I got hung up on the install problem.

 I'll tackle your explanation now to see if I can get it working. Since I already bought the software I'll keep my fingers crossed.

Thanks

OK, I updated the server with the SP 8 Jet updates and this had no effect.

Then I loaded the asptest file and put in the correct path. The results were:

Failed: Database could not be connected to....

Error reported from server:
Error source: Microsoft OLE DB Provider for ODBC Drivers
Error number: -2147467259
Error description: [Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x784 Thread 0x854 DBC 0x2101014 Jet'.

Sorry, you cannot, that is how it works and that is how it has to work for reasons I am not going to try to explain as it is pretty technical. (it works the same way even when not using paypal and using email authentication... nearly every registration system out there does it that way under an email authentication scenario or a PayPal IPN thing.)

Basically, if you are concerned about it you need to periodically manually check for accounts that were never activated and delete them. Maybe when I get some time some day I will make a little interface to help find those and clean them up at once.

Your users with Internet Explorer may have received the "Page Expired" error.  For ASPProtect users, it happens when  the user is not logged on and tries to invoke the target page. check_user_inc.asp puts up the login form, and IE sees it as part of the target page.  Any later attempt to Back up and reload from cache gives the errror. 

OK, well, that error is pretty self explanatory really. There isn't anything else it could mean.

What you showed me in that screen shot all looked correct, but still permissions to that file just can't be correct. The paths are correct. The path to the file looks correct. The ASPNET (ASP.NET) account looks correct.

I would try settings permissions directly on that XML file. Perhaps child permissions did not go through the way you intended. (the advanced tab must be used for that) If that doesn't work try giving ASPNET and Everyone full permissions on the file directly.

Possibly check the paths in the web.config file just for the heck of it.

Last case scenario, you can edit that XML file directly instead of using the screens in the application. Of course if that file does not have correct permission chances are other things like log files will give you issues as well.

That is all I can think of right now.

Parent paths being enabled on the server is a requirement of the application. That error means just what it says.

you can change all the server side includes to virtual includes that will work or you can ask you host to enable parent paths.. those are the options

more here...
http://support.cjwsoft.com/code/moreinfo5-1.htm

Got any info for me on this ?

Chris

in Control_pic.asp is there way to wrap the description field so that it doesn't go outside the table.

Thanks

it is an email server/setting issue most likely

your email server probably requires outgoing authentication or something like that and that is why internal emails can be sent to but nothing else

its something along those lines

this will help you see the real error instead of the generic 500
http://support.cjwsoft.com/code/moreinfo11-1.htm

ok, I just sent you a private message with download information.

replace you existing

"check_user_inc.asp"

"admin/check_admin_inc.asp"

"admin/email_user.asp"

with the new versions in the download

Do some testing to make sure that HANNAH password works ok for you.

Hopefully this cures the issue...
If it works ok for you for a while I will offer the fixes to everyone and start using this code from now on

BTW:
"admin/email_user.asp" had an unrelated bug in it that only happened if its error handling got triggered... it was posting back to the wrong page when that happened and causing an error

yes, How can I have fixed size height and width image without distortion. Is there a component that I can use or how can I change the existing code.

yes, unless its ratio matches

how could it not be ?

Please keep questions like this in the forums... thx.
there is no need for this to be a private message

-- Previous Private Message --
Sent by : eeye
Sent : April/29/2005 at 2:19pm


If I choose fixed width and height is the thumbnail image going to be distorted?

-- Previous Private Message --
Sent by : cwilliams
Sent : April/29/2005 at 1:17pm

that is not possible unless you rewrite the code.

You onlyahve the two options we give in the config file for thumbnails

fixed width and height all the time

or

fixed width / dynamic height



-- Previous Private Message --
Sent by : eeye
Sent : April/29/2005 at 1:07pm

Hi William

One more questions for you. is there a way to make sure that all the thumbnails are the same size without distorting the images (in the thumbnails). Or if a picture's height is bigger than its width is there to create the thumbnail such that the height of the orginal becomes the width of the thumbnails and vice versa.

Basically I just want the thumbnail pictures to be in a perfect row with all the picture heights the same and all the pic width the same.

Thanks

Sean

Well I have the web hosting tech looking into the memory issues at this point.  Unfortunately I don't have another machine to be able to run the asp on that would run it correctly so that I can just publish it over.

MySQL Database Setup

Use of MySQL is 100% unsupported as you can see from the site.
http://www.aspbanner.com/mysql.htm

Even still I recently had an encouter with an extremely Jerky person (read the thread above for more on that) and because of him I am adding this tutorial showing one way to set things up on a windows server using the official MySQL tools available.

Let me just say as well that there are 100's of 3rd party tools to work with MySQL databases and many ways to create the database and apply the database creation script. In the past it had to be done via the command line, but now there are a lot of visual tools you can do it with. Furthermore all hosting companies set MySQL up differently and give you access to varius interfaces to manage it which are all different, and that is primarily why I do not support it. How the hell could I support all those different interfaces many of which are totally custom?

The fact is 99% of the people that purchased ASPBanner to use with MySQL have done so without issue and love how it runs. Regardless here is how I set up a working MySQL database on a windows server proving it does indeed run with a MySQL database.

1st of all if you are setting up the server you need to download some things from http://www.mysql.com/ 
(btw: you local developers can install this on XP Pro as well if you like.)

For this article we are going to download the current non beta windows version of MySQL which is 5.0. ALso known as the Windows Essentials (x86) download. It's about 17 meg.

Because ASPBanner uses the MyODBC drivers (now called Connector/ODBC) to connect to the MySQL database you need to download those as well. (Our site flat out says this is required for MySQL use)

So I download those from here. http://dev.mysql.com/downloads/connector/odbc/3.51.html
Version 3.51 has been the current version for a couple years now.
You want the windows driver install which is about 2 meg.

The two downloads should look like this.



Now, on the webserver you run the version 5 setup (mysql-essential-5.0.19-win32.msi) I will guide you through it step by setp.



Hit Next



I am going to choose typical for the sake of this article.

Hit Next



Hit Next



Wait for a bit



I skipped this part.



Choose to configure the MySQL Now

Hit Finish

Hit Next

I am going to choose Detailed Configuration



Since I am on a development machine for this install I am going to choose Developer Machine. For a Real Server choose one of the server options.



For this article I am going to choose Multifunctional Database: You may want to pick one of the other options. That is up to you. ASPBanner will work under any of the scenarios.



I am going to leave the location at its default

Hit Next



Since this is a development machine these options are fine.

Hit Next



These options are fine as well.

Hit Next



Standard is fine for my development machine.

Hit Next



I am going to choose both of these options. The 1st one is Important and should be enabled on a real server so MySQL always runs. The 2nd is not so important.

Hit Next



Set the "root" password and do not forget it. You will need it to manage your MySQL server. I do not advise creating an anonymous account unless it is a development server and you just do not care. Whether you enable root access from remote machines or not is up to you so do some research on that. For this articles needs I am not choosing it.

Hit Next



Hit Execute and wait



If all goes well you will see this. (I actually got an error message about not being able to connect... I went to to Administrative tools/services and restarted the MySQL service and hit retry which cured that... it probably only did this to me since I have installed this before.. new installs probably will not have any trouble)

Hit Finish

Your done.. You just installed the MySQL Server (TIP: its usally a good idea to reboot and make sure the MySQL servce is running by default)

Now, moving on..

Lets install the MyODBC drivers.. (now called Connector/ODBC)

This one is a bit of a no-brainer so I am not going to go into detail.
Just run (mysql-connector-odbc-3.51.12-win32.msi) and run through all the defaults until it is done.. Choose typical when that comes up.

Your done setting up MyODBC on the server. If its not your server I guess you don't need to worry about installing all of this as its your hosts job to do that.

There are 8 Access Levels by default.. they work like this.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=166& ; ; ;PN=1

Access Levels exist in ASPProtect Version 7 for backward compatibilty for customers using previous versions.

Truth is Groups are the replacement for Access Levels and they are much more powerful and flexible. You can also make as many of them as you want in the admin area.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=167& ; ; ;PN=1

On a side note:
We also coded ASPProtect Version 7 so there could technically be as many access levels as you wanted. It's not supported but if you really wanted more Access Levels you would carefully add more Access Levels to the drop down choices when you edit a user. "edit.asp"

I don't know why anyone would want to use Access Levels however when they can use Groups.

did you fix it because I see all the pictures just fine ?

http://mcintoshcounty.org/real_estate/view_item.asp?Ad_ID=1

sometimes those emails take a bit... all depend on wht you are using to send them and whether a pickup directory is involved

as for the other I do not know.. PM me the site details I can look

if it is a 2003 server parent paths must of course be enabled.. its a requirement of aspclassifieds