Blog Entry: 3/25/2006 1:45:59 PM
sounds like the data/export folde does not have permissions, Verison 8 is superior in every way and the code is much more optimized so yes I think it would handle it better. It is still a lot of banners on one page though which means a lot of hits to the database if you call them all individually with zone calling code. SQL server would make sense more than MSACCESS.
Now, the only reason I said make one zone for all those banners on the home page is because a banner has to be associated with a zone. It would make sense to put them all in one because if you just tracked the clicks like I mentioned you really wouldnt be using the zone except for maybe when you go to view stats. ,
It's real easy actually if ya sniff around the source code.
ASP is so easy to (work with/edit) even if you dont know any code.
edit "save.asp" with a text editor
change
If Request("First_Name") = "" Then
ErrorMessage = ErrorMessage & Server.URLEncode("You must enter a First Name.\n\n")
End If
to
If Request("Company_Name") = "" Then
ErrorMessage = ErrorMessage & Server.URLEncode("You must enter a Company Name.\n\n")
End If
From looking at that save code I dont see where Last_Name was required. The only name I saw required was a 1st name.
Also.. making the First_Name not required may break something somwhere else. I dont think it will but it might. You are warned.
cwilliams38326.5102662037, If a picture does not show after uploading it is one of the following things.
The upload method chosen is not supported on the server
or
The physical path specified to the pictures folder is not correct.
or
The URL to the Pictures folder is not correct.
or
Permissions to the pictures folder have not been set properly
Here is more information on how permissions are set.
http://support.cjwsoft.com/code/moreinfo136-1.htm
http://support.cjwsoft.com/code/moreinfo56-1.htm
Without more information and the settings you have entered and chosen that is all I can offer for now.
, Yes, I created it using the scripts.
, sometimes those emails take a bit... all depend on wht you are using to send them and whether a pickup directory is involved
as for the other I do not know.. PM me the site details I can look
if it is a 2003 server parent paths must of course be enabled.. its a requirement of aspclassifieds
, For all you advanced users..
Here are two examples of ASP.NET code you can use on your ".aspx" pages to call banners from the ASP 3.0 version of ASPBaner Unlimited V8
This code is not supported... and you of course must change things accordingly like the variable names and zone numbers to match the zone you want to call banners from as well as the url.
2004-08-27_153832_asp.net_examples.zip
cwilliams38226.6523263889, I did not set that variable in the IPN code that aspprotect uses. It is optional.
You will want to download PayPal's IPN documentation and see what the variable is called and then add it to the IPN form code if you want to use it.
it will be a hidden form variable (one line of code added to) paypal2.asp, I was actually able to do similar thing by allowing our dedicated search engine to access the site unchallanged.
<%
If Trim(Left(Request.ServerVariables("HTTP_USER_AGENT"),11)) = "MYPASSWORD" Then
SearchFlag = True
End If
If SearchFlag <> True Then
If Session("Access_Level") > CHECKFOR or Session("Access_Level") = "" Then
%>
<!--#include virtual="/Auth/check_user_Code.asp" -->
<head>
<title>My Title</title>
</head>
<body>
My Protected stuff here
</body>
</html>
For this to work, the search engine must pass the PW to the web site. I just was not sure how to do the same thing with IPs. I will play with the code and see what happens. If it works, I will post it here to help others, if this is OK with forum rules.
Thanks,
Mo
, Because employees and sales reps might leave or go to work at competitors without our knowledge and we can't have them get an perm account so we need to implement some sort of expiry and then review their account with them., I have ASP Photogallery running and it seems to be great, but I would like to allow uploads using DUNDAS the problem is I can't seem to find it on the linked website. I did find an EXE install in another place but I am running on a Shared Host (Godaddy) and can't run an executable on it. Where can I find Dundas and is there a way to install it without running an EXE??, After turning off the friendly errors, here is the detail.
Active Server Pages error 'ASP 0131'
Disallowed Parent Path
/users/register.asp, line 16
The Include file '../dataconn_inc.asp' cannot contain '..' to indicate the parent directory.
ANSWER:
http://support.cjwsoft.com/forum/forum_posts.asp?TID=5&K W=Disallowed+Parent+Path+
lancem38310.6408101852, rrabago
I have been looking over the code and also doing some tests.
So far everything in the code looks correct and everything I have tried has worked correctly. If I select an access level and active users it is not sending emails to inactive users as you stated.
Are you using the option pack ?
cwilliams38103.9618402778, How and where does one add countries/cities to the list so that they appear in the Drop-Down list that advertisers see when they are placing a new ad?, Really, only you or your hosting company would know that information...
It is usally installed in the "_database" folder but the physical path including the drive letter to that can only be known by asking your hosting company or by using server mappath to learn the path on you own.
http://www.powerasp.com/content/hintstips/physical-path.asp
That folder also needs special permissions. The permissions it needs are covered in the documentation for the software and generally only your hosting compnay can set those permissions.
The online support forums here are full of information and resources on correctly setting up data connections. It is ASP 101 and something you really need to have an understanding of.
I am happy to answer questions and try to help, but if you dont want to deal with it or can't we do offer installation services.
http://www.cjwsoft.com/installation_service.asp
, And I'm the one who finds those rarities! I'm not surprised. 
Oh well...this should be interesting trying to get an 80 year old man to change his password.
Thanks for your quick responses Chris. This is still an awesome membership system!
Mick
, The problem was in config_inc.asp. we had renamed the field in the DB but didn't change it in this file.
But we changed it, it is back to normal.
Thanks
, Yea.. that error is totally because the asp pages are looking for fields in the database that are not there.. and causing a nasty loop.
if using the option pack you must go over the directions very carefully...
Make sure everything works step by step..
After upgrading to option pack code you either need to upgrade the database from the base system or use the newer database provided with the option pack.
Then.. you want to test every function of the groups.. if pages act slow and seem odd... especially the groups page and edit users page..
Then your not using a valid database. Either you didnt upgrade the old one, are not using the new one, or your connecting to an older verison by accident and not realizing it.
That's pretty much it...
cwilliams38300.5555671296, Chris -
Sorry, I am looking at your code on view_item.asp and I have noticed that you are calling 3 variable; start_date, end_date, and image_url that do not exist in the databases that you provided. Do I have the updated package for ASPVendor?
, one thing to note... the time period we are talking about is going to to be whatever you have the session timeout set at in the settings.
perhaps making that value lower like 10 minutes is an option for you.. and might help to deal with situation
, Rather than bill customers through my PayPal account in $$$ can I get ASPProtect to send through the amount to PayPal in £ (pounds sterling)?
I am using PayPal (non-subscription) [paypal_signup]
Many thanks
Ian
, If you need to know how to enable them on your test server.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=5&P N=1
, Greetings:
I am doing the initial set-up and have run into a problem. Everything has gone smoothly up to and including pulling up the get_me_in.asp page. When I enter the "PasswordEncryptionKey", nothing happens. The page just sits there without doing anything and the browser says it's opening the page, but never does. I have tried entering the value with and without the double-quotes. The value is the correct one from the config_inc.asp file. I did a copy paste from the file twice to insure I transferred it correctly.
I am running Windows 2000 server.
What now?
Warren
, When a user 1st signs up a proper case function is run on certain fields.
This is only once on user signup and never done in the admin area.
It's goal is to keep things entered in Proper Case,
so if someone enters "chris williams" it becomes "Chris Williams"
It's not perfect but it helps a lot to keep the data clean and more consistent. Since it only happens during registration those values can be changed later by the admin or the user if someone wants to.
The function is only applied to the fields that it makes sense to apply it to....
In your case adding a drop down menu means you want exactly what is in your drop down to appear so you wouldn't want it happening.
That being said, it is really easy to remove this situation from any field it is happening to during registration.
So edit "users/add_new_account.asp" with a text editor
find
CmdAddUser.Fields("Company_Name") = PCase(Company_Name)
and change it to
CmdAddUser.Fields("Company_Name") = Company_Name
That is all that is needed to made the change
cwilliams38421.5069328704, Thank you.... yes it does
Is there a limit in the number of Zones you can have in the database.
thanking you
, ok, how about some more in fo on the setup ?
What version of MSSQl ?
Exactly how did you create the sql database ?
Is it possible banners.asp got edited ?
Did you create all your banners via the admin interface and do all all banners have a zone assigned as that is important ? Sometimes customers will add banner info directly to the database and leave out vital field info that the application requires. Based on that error it is starting to look like that page is coming across a banner with no zone ID and thus the error. , After understanding how the count works i checked the IP in the db. They are all set to the same IP (my web server) no matter what ip is doing the viewing. This is probably due to my ISA2004 firewall that is posting the ip address of the web server with each log on. So, can you help me with where the code would be to modify so the db does not get updated? I risk the refresh problem, don't think it is an issue with me.
Thanks,
, That is by design, removing and deleting are two different things as far as the classifieds system goes.
A regular user can only remove an ad from the category index. (which makes the ad inactive)
An admin however can truly delete an ad from the system.
, No rush, I have it out on the internet, but have not gone live with the site yet.
Thanks for responding,
Enjoy your well deserved break
, Oh snap. Tried the blank database and got the same errors. Fixed THE
FILE PATHS to conform to the AspProtect 7 setup, and it worked like a
champ. I still need to copy and paste the info, but it's working just
fine with the ones I add manually.
Moral of the story: FOLLOW INSTRUCTIONS TO THE LETTER. 
, Hope the wedding went well. I have one this weekend.
I was successful at performing an upload. The free upload software was either not configure properly (probably) or not working. I downloaded the trial version of softartisan's upload (which is like over $300) and it started working.
Can more than one photo be uploaded at one time (like a whole folder full of photos) or does each have to be done individually?
, the reason being is because when I do installs I do not touch any of your existing content. I only install the base application and make sure everything in it working correctly and also that the example protected pages are working. I do not integrate it with your existing site or edit any of your existing web content. That is up to you
sorry about that, but it would be way too time consuming and editing people's existing pages is a good way to cause a lot of headaches for me and the customer if something goes wrong. Not only that but everyone uses the system differently and it wouldnt make sense for me to be the one doing that based on access levels, groups.. etc etc which will all be custom to how you want things set up.
more on installation policies here.
http://www.cjwsoft.com/installation_service.asp
, it is not uncommon for folder permissions to be lost or changed on a server.. a lot of things can cause it
if it was working and now you can not edit or write new data to the database it is most likely permissions
I would triple check permissions... see my articles if there is any doubt on how permissions are set
http://support.cjwsoft.com/code/moreinfo136-1.htm
http://support.cjwsoft.com/code/moreinfo56-1.htm
, Hello:
When using the Mass Mail feature and selecting the Users to ‘Active’ and the Access Level I want to send to the system will still send e-mails to the ‘Inactive’ users from the same Access Level.
In other words it sends to everyone in the Access Level regardless if you choose “Active” only.
Any ideas to correct?
Thanks,
-Ricardo
,
IMPORTANT UPDATE - READ THIS
http://support.cjwsoft.com/forum/forum_posts.asp?TID=205& ;PN=1
The IPN Subscription Pack which is built in to ASPProtect 7 contains all the pre-built scripts you need to implement PayPal IPN Subscriptions with ASPProtect. IPN stands for (Instant Payment Notification). It allows you to set up scripts on your server so whenever a PayPal payment is processed the PayPal server sends info to your server regarding the transaction and vice versa. This is a fully automated process and allows you to charge users for access by the month or however long you like.
The Subscription feature of PayPal handles recurring billing automatically. The PayPal server will communicate with the ASPProtect system and keep everything up to date with users and their subscriptions.
This Support Pack basically gives you an additional signup and registration directory "paypal_sub_signup" and it should not interfere with any changes or customizations you have made to your ASPProtect setup. New users can register in this directory and sign up for a subscription at the same time. Existing users whether active or expired can be sent to this directory where they can lookup their account and start a subscription. You can also assign various Access and Group Levels during signup and you can set up various prices for various amounts of time as well. This is a real-time setup for the most part. As soon as a user pays via PayPal your system is updated and they will have access.
To use this all you need to do in ASPProtect 7 is enter your PayPal account name into the settings screen. It will be an email address. You'll need a business or premier account with PayPal and you will need log into your PayPal account and turn on IPN in you profile. They make you enter a default IPN URL. We do not use that so if you already have something there leave it there. If you dont have something there you can type in any the full url to any page on your server. It's probably best to send it to an empty ".asp" page or something.
Changing Payment Options
In the "paypal1.asp" file there are some sample payment options set up.
They look like this and you can have as many as you like.
<!-- Begin Payment Option Code -->
<form action="https://www.paypal.com/cgi-bin/webscr" method="post" target="_blank">
<% Label = "Membership (1 Month) $9.99 Recurring" %>
<!-- Begin Form Fields You Can Edit.. See PayPal Subscription Manual For Details -->
<input type="hidden" name="no_shipping" value="1">
<input type="hidden" name="no_note" value="1">
<input type="hidden" name="a3" value="9.99">
<input type="hidden" name="p3" value="1">
<input type="hidden" name="t3" value="M">
<input type="hidden" name="src" value="1">
<input type="hidden" name="sra" value="1">
<!-- Field Below must have 2 commas First two values are optional (access level,groups,user ID)-->
<input type="hidden" name="custom" value=",,<% =User_ID %>">
<!-- End Form Fields You Can Edit.. See PayPal Subscription Manual For Details -->
<!--#INCLUDE FILE="form_data_inc.asp"-->
<input type="image" src="https://www.paypal.com/images/x-click-but20.gif" border="0" name="submit" alt="Make payments with PayPal - it's fast, free and secure!">
</form>
<hr>
<!-- End Payment Option Code -->
To really understand what these form values mean it is best to look through the PayPal Subscriptions Manual which is a PDF file you can get from the PayPal Site.
This link was valid the last I checked...
Subscriptions and Recurring Payments Manual
It also may be helpful to use their wizard to create some subscription buttons with different settings and then look at the code generated.
Bascially these are the important ones..
|
a3 - amount to billed each recurrence
t3 - time period (D=days, W=weeks, M=months, Y=years)
p3 - number of time periods between each recurrence |
The custom field is something we are using to send info from ASPProtect to PayPal.
it allows you to set the access_level or groups access (groups support require the ASPProtect Option Pack)
<input type="hidden" name="custom" value=",,<% =User_ID %>">
or this example where we are setting the access_level to (2) and also giving the user access to groups (3 and 4)
<input type="hidden" name="custom" value="2,*3*4*,<% =User_ID %>">
Here is how it works.
The value setting (red) is essentially and array that can be made up 3 elements separated by comma's
access_level,groups,User_ID
If you do not want to set the access_level or groups access.. then you don't even need to edit the setting.
Values must be separated by a comma even if there is no value and there can be no spaces. If you didn't want to set an access level or groups there would still be 2 commas at the beginning. etc etc
Basically there must always be 2 commas but you only have to set last values which is the User_ID from the ASPProtect system.
The 1st value is the access level you want to user assigned to.
The 2nd option is the groups you want the user assigned to. (requires option pack)
The 3rd option is the User_ID which the system takes care of. Do not edit this option. Leave it as <% =User_ID %>
cwilliams38421.7141782407, Good Morning - I am receiving an Http 500 internal server error when I go to add a new user via the register.asp page. the url when the error appears is: .../users/add_new_account.asp
I think the error has to do with my email component setting - becuase it works fine otherwise.
I have the email component setting set to CDOSYS (using remote server) with the mail.remote.server set to email.cidra.com - email address set to webmaster@cidra.com
Note: I receive the email notification and the user does get added.
Can you help please? Shirley
UPDATE...I just figured out that it only errors when the email address I use for the user is NOT from cidra.com -- Any idea why?
, One problem that is appearing is that in the admin section, in the users.aspx page, only one user is showing up when there are in fact 9 users. Also, when I click the edit user or email icon, the page does not go to the edit screen, it remains on the same page.
Also, I’ve been trying to modify the code to adapt it for our application -- by removing fields that we do not need such as address, city, state, phone, but I am having trouble getting visual studio to compile. It could be due to the fact that the rest of the project is in C#. Or it could be due to some other factor in ASP Protect.
, Hi, lets start with about when did you purchase and download the application so I know what version of the code you have., Christopher,
When viewing a list of albums with the navigation option 1, is there a way to get the Time Created sort to list Newest to Oldest, instead of Oldest to Newest.
Looking at the code in albums_navigation1_inc.asp, I can not determine how this works.
Thanks for your help!
- Jason
p.s. I always forget how addicting this stuff can be...lol.
, Hi-
Thanks for the quick response to my previous posts.
This is my issue:
I have read over all the docs and installation instructions and can't find a way to do this:
my default page in my root dir will be a log in page which will take the user once his level is validated to a "home page". Is there a page in your examples that will perform the function of this log in page? or should I rename check_user_inc.asp as the default and change it's html output to make it look like my log in page?
I also looked within the code for check_user_inc.asp and did not see where to specify where the user will go once he signs in.
Your help is appreciated
,
Timecard Entry: 3/25/2006 1:45:59 PM
Party at Brownell abstract, post office run, trying to figure out this %^&$ phone system now with Jim, Fed ex stuff for Paul with business plans,TAF spread sheet again., tech support supervisor duties , radlog, callbacks, dial up issues, help techs. ,q light, emails, follow ups, emonitor, was steady but not busy, i caught up on the open incidents that where left, went on radlog and some expired users needed to be called from earlier that had been missed i did some and passed some to techs they where slow , training with case had his do radlog per ron and then go on reg calls did well , 3 Miles - 135 Park Pl. - NYAB (Watertown), got caught up on voicemail email form yesterday, sat down with jason to go over cph, wstar mls, century 21, Helped Chris W. on softmls development of advanced record cycling, Searched some ASP sites and looked for some new ASP books, watertown office- drop of check to bronwall/drop off info to watertown office/pick up info, batching and answering phone, , Traveled to Watertown for meeting with Carthage savings and loan 24 miles, NEC re: ISDN problems w. 802 routers, On way to VBITS convention in NYC., Working on nnymls conversion... till 6 in the morning... with Steve Woodfin and Crispin, lunch, Mediation research & phone calls, NORTHERNGLASS.COM MEET WITH CLIENT ABOUT ADDITIONS TO WEBSITE...., callbacks, tanned, Daily routine, Message on home page about 4th of July holiday., MET W/ 401 K & LIFE INSURANCE GUYS, content filtering flyer and channel breakfast invites, callbacks, lunch, Folded some more and finished up modem tests., emails, timecard, enter bills, Jim showed me how to install the Konica printer onto Darryl's computer, and then I practiced on the Test Machine., Meet with St. Lawrence Chamber, train with cathy, meet with Jim, Went to the bank to make the deposit and to get supplies and Paul's cake,
