can add photo album but after i upload a pic, nothing shows.

where do i look to research why pics aren't showing in the albums

Chris -

I am encountering a problem with items showing up.  When I click on a category and then select an item to view I get

THIS ITEM IS NO LONGER ACTIVE
DO NOT CONTACT THIS USER AS THIS ITEM HAS BEEN TURNED OFF
OR THE USER HAS SOLD THE ITEM.

I have verified the item has the item_active check.  For giggles, I even unchecked with the same results.

Thoughts?

The Pop-Up Javascript Date Pickers will only show up of your server's regional settings are set to one of two lCID values.

1033 which is English - United States
mm/dd/yyyy date format

or

2057 which is English - United Kingdom
dd/mm/yyyy date format

Many servers are set to run the default LCID which is 2048 so the banner system will not show the date pickers.

This setting can however be easily overwritten when using the ASPBanner system.

or

Session.LCID = 2057

depending on what date format you are looking to use

Save the file and go edit a banner. The date pickers should be there now.

I just upgraded from 6.0 to 7.0 primarily because we were limited in the choices of email systems we could use to send an email validation message.

Previously, with 6.0, we were using CDONTS to send an email validation message to new registrants. Unfortunately, AOL email addressee's were not receiving the vaildation email from us. I received a reply to another post I made on this forum that the problem was due to the fact that aCDONTS generated email has no MX record and AOL blocks non-MX record containing emails.

Well, I upgraded to 7.0, switched to CDOSYS (Using SMTP Virtual Server) with SMTP Authentication and it appears that AOL is still blocking the validation email.

Any suggestions, comments?

First pass through, I don't see anything changed in the groups section of the check_user asp file. the logoff asp wasn't touched.

I noticed the demo online (on this site) only has pages protected with access levels; you say it works fine with groups also?

Okay, I did that, now I get:

Microsoft VBScript runtime error '800a004c'

Path not found

/aspprotect/password_admin/upload_post.asp, line 292

no, you cannot unless you plan to write a lot of custom code.

That is why the option pack has groups which eliminate the need to use access levels because groups can do everything access levels can and more.

There is an article here regarding that.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=32& PN=1

If you re-start the web via IIS, reboot the server, or (possibly) just add and remove a category... that will clear up.

ASPClassifieds and ASPListings must be installed in seperate IIS applications if they are the same web. Otherwise the category caching system of each system will interfere with each other. They were never intended to be installed in the same web together since ASPListings is merely a stripped down version of ASPClassifieds and they share a lot of the same code. Like I said though if different IIS applications are set up in the web site you can do it because each IIS application will have it's own set of application and session variables.

ASPProtect Version 7
Expiry Notices go out to members who have recently renewed by subscription.

When an existing member from ASPProtect Version 6, with an expiry date, renews with SUBSCRIPTION in v7, the previous expiry date remains unchanged.
We assume the expiry date remains blank with NEW Subscriptions and that Paypal takes care of notifications.

 But our notifications to the "about to expire" dating from v6 catches the "Renewed by subscrtiption" as well, as the date has nor been changed or removed, and this REALLY confuses our members.

Can this be resolved?

Noted:
I actually did not think you did.

As far as debugging goes.. thats all built into visual studio.net.
There is a tag you edit in the web.config file to enable project debugging
http://support.cjwsoft.com/code/moreinfo251-1.htm

Like I said though for changes to ASPProtect.NET I'd start off from scratch and stick with vb.net... using the visual.studio.net interface is not really vary hard to remove and change things you dont' need even if you are a C# coder. Especially simple stuff like you mentioned.

Password Retrieval System

CDO.Message.1 error '80040213'

The transport failed to connect to the server.

/aspprotect/scripts/emailing_subs_inc.asp, line 174

This is running on Windows 2000 server.

Any ideas?

Warren

Yes, thats cool.. post it here for sure.

Also, the way you allowed for your search engine is clever and probably was the easiest way to go.

You could do the same thing with the IP. Much easieri than the way I was thinking of doing it.

For pay signups you set the groups during signup it like this thread tells you to

http://support.cjwsoft.com/code/moreinfo186-1.htm

only difference is you need to specify the groups info like so
(basically getting rid of the commas and just leaving behind the group numbers with a * around everything)

Also be sure to have no double asterisks

so, *1*,*2* would just be *1*2*

so, *1*,*2*,*5* would just be *1*2*5*

upgrade pricing is here
http://www.aspbanner.com/purchase_unlimited_v8.1_classic_upg rade.asp

what is different
http://www.aspbanner.com/v8_notes.asp

the changes to make it work with MySQL were vast to say the least
more on that from an old thread
http://support.cjwsoft.com/code/code_info.asp?TID=37&PN= 1&TPN=1

just please remember use of MySQL is just not supported
http://www.aspbanner.com/mysql.htm

I can assure you it works well as I have people using it

I used Dreamweaver4 to make my site is there anything I can do to make it work?

Help!.. I need to export the username and password fields to a mail merged letter so everyone knows their username and passwords. However whenever i access the database or do an export. The passwords showup as encrypted. Is there a way to access the list, un encrypted?

thanks

Hello,

Yes, that is how it works. Unless you make modifications to the code there is no way to easily do what you are talking about.

If you design the site to be intelligent that scenario should never happen.

For example.. you should only be offering links to pages that the current logged in user has access to. You do this by checking the session variables and with simple if-else logic around your html links.

It requires some work but if you dont give them links to pages they dont have access to what you are talking about will not happen.

Here are some simple examples.

Here is an example using access levels.

<%
If Session("Access_Level") = "1"  Then
' show links to pages that allow access level 1
End If
%>

And one for groups..

<%
If Instr(Session("Groups"),"*6*") or Instr(Session("Groups"),"*7*") Then
' show links to pages that allow groups 6 and 7
End If
%>

You need to make sure you created the SQL database using the SQL scripts we provide and that no errors occur whatsoever. That is extremely important. You must use our SQL creation scripts.

Then, when you create the user you need to go back to that user and make sure you check the admin account and save that user again. (many times when setting up a system for someone I find myself forgetting that step and then I have to go back in and check the admin box for the user I created.)

And of course create the user from the ASPProtect admin area web interface. Do not add the user to the database manually because you will have no way to enter the password correct as it is encrypted. And do not change the encryption key after making the user/.

It would also be wise to check the SQL server database at every step to make sure the user info gets created and that all the field info looks correct for the most part.

You also want to be sure to specify SQL as the database type side the connection string info as the SQL directions go over

a remote sql server should not an issue.

thats really all I can think of right now

import/export feature WARNING !!

I just want to warn everyone that the built in import/export feature can be a little dangerous.
The reason being is when you import users they get new "Users_ID"s in the database.

The "User_ID" field is an autonumber field and that is why and there is nothing you can do about it.

So, if you are using a user's current "User_ID" to keep track up something important NEVER export the users and re-import them. Because their "User_ID" will change and you will be in trouble.

The PayPal signup features of ASPProtect actually use the "User_ID" like this and that is the main reason this warning is here.

now, that being said

If you are importing new users into ASPProtect

or

simply exporting existing users to another system

then this is nothing to worry about.


Basically, the moral of this story is dont think of the built in Import/Export feature as backup system because it is not. It is not a substistute for backing up your database.

It is a just a tool that can come in handy for various things.

humm, I dont know then..

If you want PM me your site info and I will go in and troubleshoot.

Frontpage or frontpage access, either way

and also the site URL

Testing for XML Parser Support

the microsoft xml parser is generally installed by default on all new server setups..

It allows ASP code to make calls to other pages anywhere on the new as well as a lot of other handy things..

download and run this ".asp" page to verfiy that it is installed and be sure it is available for you to use

2004-12-10_132620_test_xmlparser.zip

Make sure you run it from your web server through the web browser

Where is the system getting the random user name and password, and why does it keep selecting the same user name and password every time?

here is the answer
http://www.iisanswers.com/IIS51.htm

CDONTS

CDONTS (Colloaborative Data Objects for NT Server) is a feature of NT and W2K that allows you to easily send mail from a web page using the SMTP server. The simplicity of the code and widespread availability of free scripts employing CDONTS has resulted in  CDONTS being widely adopted.

Quite a surprise to many administrators to discover that IIS 5.1 does not support CDONTS as do IIS 4.0 and IIS 5.0. This has been replaced by CDOSYS which appears to have more capability, but it is not quite as simple to use. See: http://support.microsoft.com/default.aspx?scid=kb;EN-US;q195 683 for more details.

You can enable CDONTS on XP by copying CDONTS.DLL from a Windows 2000 installation to your XP system’s Windows\System32 folder (default name). Then at command prompt Windows\System32 run REGSRV32 CDONTS.DLL. The extent of my testing on this was to deliver one piece of mail, so this should not be construed as a complete analysis of the effectiveness of this technique.

one last thing... if you did an upgrade from a previous version and didnt do the whole database field thing right during the upgrade process as stated here you could have trouble.
http://support.cjwsoft.com/code/moreinfo174-1.htm

Meaning you should check your new database with the field structure of an unmodified new database and make sure all field names match up perfectly.. especially paying attention to the username and password fields

One last thing..
If you did an import via text file and didn't import all the fields ASPProtect needs you could possibly have problems as well.. though I don't think this relates to the timeout so it probably is not the case

it might also be a good idea for you to try a simple text file writing example like this on your server and see if it hangs as well

http://www.devasp.com/samples/writetofile.asp

for troubleshooting sake

this is sounding more and more like the filesystem object is blocked or disabled on your server