That is by design, removing and deleting are two different things as far as the classifieds system goes.

A regular user can only remove an ad from the category index. (which makes the ad inactive)

An admin however can truly delete an ad from the system.

I am having an issue with the Thumbnailing process. My host does not support ASPImage so I have to use something called asp thumbnailer which is similar to ASPImage. I am trying to modify the Dundas upload to automatically reduce the images to create thumbnails. I ripped out the asp image code and replaced with the bottom. The main issue I believe is grabbing the image files. I am not sure how to name the actual image file that is already uploaded by the dundas upload. the code is below:

The peices in red are where the issue is I believe. What you see below is my attempt to identify the exact image and then rename it tthumbnail. My optimal solution would be to take the picture, resize it and rename it exactly what it was named before.

Any ideas

Thanks

<% Else %>

<%
 Dim thumbObj
  
 Set thumbObj = Server.CreateObject("ASPThumbnailer2.Thumbnail")
  
 If thumbObj.LoadFromWeb("../pictures/" & Filename) Then
     thumbObj.ThumbMaxDimension = 140
     If thumbObj.CreateThumbnailToWeb("../pictures/Thumbnail.jpg") Then
         Response.Write("Thumbnail successfully created.") 
     Else
         Response.Write("There was an error creating the thumbnail.")
     End If
 Else
     Response.Write("<p><hr><b>Unable to load the original image.</b><hr>")
 End If

 
Set ConnClassified = Server.CreateObject("ADODB.Connection")
ConnClassified.Open ConnectionString
Set cmdTemp = Server.CreateObject("ADODB.Command")
Set CmdSetImageInfo = Server.CreateObject("ADODB.Recordset")
cmdTemp.CommandText = "UPDATE Ads SET Image" & PicNumber & "_Uploaded = 1, Image" & PicNumber & "_FileExtension = '" & FileExtension & "' WHERE (Ad_ID = " & Ad_ID & ")"
cmdTemp.CommandType = 1
Set cmdTemp.ActiveConnection = ConnClassified
CmdSetImageInfo.Open cmdTemp, , 1, 3
%>

Christopher

I have gone back to your original files and uploaded them to another server folder and instead of using a DSN I have tried this with a DSN less connection and changed the database to MS Access 2002.

This has corrected the problem.
I will check this out again using the DSN with access 2002 to see if this was the problem. It may be something to do with an older format of database on this particular server.

I will let you know what I find.

Thanks for your  quick reply.

I am using cdont to send email. what do i have to do send email to other display my full name instead  of email address. In other word I want to see first name last name  in their email client instead of email address.

thanks for your help

Some users have reported an error during the registration process.
Here is what I believe is happening.

When you register you get sent a validation email that has a link in it that looks something like this.

http://support.cjwsoft.com/forum//activate.asp?ID=testAD3AD2 97BC

That link can only be clicked on once which will activate your account.

If you somehow run that link more than once you will get a message telling you there was an error.


I think some people are double clicking on the link they get sent and running it more than once.... or clicking on it again after registration is complete. It probably happens very fast so they never see the success screen.

Either way, if you can login to the forum nothing is wrong and you are already activated.

Perfect exactly what I was looking for.

Thanks

Not really.  The way I thought activity would work is that I would always see the last 50 users.  Not sure what controls that and why I wasn't seeing it, but it sounds like it is an IIS thing and since my site is not all that busy, it will not show the users if some process has reset the numbers.  Not a big deal.

As for the log files, I think it is related to my other question regarding the export directory.  I have the ISP looking into things at thier end to see if they are doing anything that could cause the directories to disappear.

Thanks,

Dave

Chris, if there is no way to change this, I understand. I just though maybe it might be possible and I can't find out if i don't ask.

Thanks Chris.

Let me know.

-john

ok, I just sent you a private message with download information.

replace you existing

"check_user_inc.asp"

"admin/check_admin_inc.asp"

"admin/email_user.asp"

with the new versions in the download

Do some testing to make sure that HANNAH password works ok for you.

Hopefully this cures the issue...
If it works ok for you for a while I will offer the fixes to everyone and start using this code from now on

BTW:
"admin/email_user.asp" had an unrelated bug in it that only happened if its error handling got triggered... it was posting back to the wrong page when that happened and causing an error

like I said... you would have to modify the code
(and really I dont think it is possible, how could it be when images uploaded are of all shapes and sizes)

How are pictures of various shapes and size going to resized to a fixed width and height without distortion on either a horizontal or vertical level ? Uness the image uploaded matches the fixed thumbnail ratio you have set there is going to be distortion.

There is no component that is going to make it any easier. You are already using an image resizing component.

I give you two options the way the code ships.

fixed width and height for thumbnails

or

fixed width / dynamic height for thumbnails

The only other possible option would be

fixed height / dynamic width for thumbnails

and that you would have to code on your own because that option is not there

The last thing I will say is this. Sorry, but I do not support custimizations to the code. It's just not easy to explain. Its a lot of code work. Its a lot of time.

again I will ask you what is the real error??

see the link above when I asked you the 1st time.
(I need the error details and line number.. etc etc)

and what kind of a server are you trying to run it on ?
you mention xp pro but in a confusing way ?

also.. every once in a while I get some nervous person concerned about security... and the pros and cons of having parent paths enabled.

etc etc etc

so let me add this bit of info..

I don’t know what your hosting company will say because it is an iffy topic and those that understand it have a hard time explaining it to someone who doesn't. Also usually the hosting company doesn't have a clue except they heard it was a security risk.

The code is ok..

Your getting an error because no banners are showing up in that zones rotation.

run this directly in the browser and you will see that there are no banners being generated for that zone ID
http://www.poconocommuter.com/aspbanner/aspbanner_inc.asp?Ba nnerZone=6

As a matter of fact I dont see any banners showing up for any zones previous to 6 which tells me either you dont have valid banners in there or the application variable info got corrupted do to a server crash / power off or something.

http://support.cjwsoft.com/code/moreinfo95-1.htm

ok... lets forget about all this redirecting business for a minute

when I go to "GP01.asp" directly via your web site I get a big nasty error that says this

Microsoft VBScript compilation error '800a0411'

Name redefined

/protect/config_inc.asp, line 15

Dim  Address_Required,CDONTS_Installed,City_Required,Registration _Type,VerifyURL,Log_Off_Page
----^ 

then when I look at what you did in that file I see why

you have this code which is totally wrong because you cannot include the password protection file twice

<%@ LANGUAGE="VBSCRIPT" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->
<% GROUPACCESS = "*1*" %>

<!--#INCLUDE FILE="check_user_inc.asp"-->

it should be

<%@ LANGUAGE="VBSCRIPT" %>

<% GROUPACCESS = "*1*" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

and that is probably the root of this entire problem.. the redirection was working...
but you were sending them to invalid pages with errors

all those pages are wrong...

if you dont see the real error above see this

http://support.cjwsoft.com/code/moreinfo11-1.htm

if you look over the aspprotect 7 installation instructions that is the very 1st thing I tell people to do

hopefully this is the info you need to continue and get some work done

I finally spoke with someone who knew what I was asking for and they set the rights and all is fine.

Thanks for your help. Wish all business' had customer support like here

If you bought ASPBanner Unlimited Version 7.3 Before August/01/2004 this file needs to be updated.

It fixes a bug where CODE type banners do not work correctly with a weight higher than 1.

Basically, blank banners will rotate and you will see nothing sometimes.

Copy this file into your ASPBanner folder over the existing file of the same name.

2004-08-03_045728_appinfo_inc.zip

Thanks for the quick reply!

I was thinking it was an ASP config/install issue.

I usually deal with Linux/PHP, so this is all new to me :)

Just an update,,,

the permission were all correct.... i left it and tried from my pc at work and it works fine... so i dont know what hahhpened.... thansk for your quick response

regards

Domenic

Sydney, Australia

yeah.. I cant say for sure.. as I have never really tried to get it working in xp pro.

Last time I actually used cdonts locally was on a 2000 box

I would do a google search on xp pro, smtp service, and cdonts and let us know what you find out.

All of our apps can use free 3rd part emailing components as well so maybe try some of those. Course you need a valid email server to connect to.

upgrade pricing is here
http://www.aspbanner.com/purchase_unlimited_v8.1_classic_upg rade.asp

what is different
http://www.aspbanner.com/v8_notes.asp

the changes to make it work with MySQL were vast to say the least
more on that from an old thread
http://support.cjwsoft.com/code/code_info.asp?TID=37&PN= 1&TPN=1

just please remember use of MySQL is just not supported
http://www.aspbanner.com/mysql.htm

I can assure you it works well as I have people using it

I have set up a user to be redirected to a different page when logging in for the first time.

I assumed this function would count the number of times a user has logged in. When the login count was greater than 1, the user would be taken to the default.asp 

This isn't happening. The user is always redirected.  The user login count in the database is now 9.

What am I missing?

yeah.. thats an old graphic probably only seen in a few places.

it is not on the main site
http://www.cjwsoft.com/
or here
http://www.aspprotect.com/
or here
http://www.aspbanner.com/
or here
http://www.aspclassifieds.com/
or here
http://www.aspphotogallery.com/

but I am sure there are a couple of pages left over still using it like the aspvendor and asplistings pages.. etc    I am aware of it, just been too busy to go change them and I didn't consider it a big deal

2003 servers are NT based anyway

Thanks.

Nick

Hello,

Again, enspecified error are not very helpful.
An error usually tells you at least a line number and page or something.

Please read this as it might help do tell me more.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=11& PN=1

As for only happening once in a while. It could be a lot of things.

Version being used (when did you purchase.. what name/email was it under and I can look) ?
What banner method being used?
Access or MSSQL ?
How busy the site is ?
Server Resources ?

ok, PM me some additional info so I can go look around.

I dont quite understand everything going on.

Let me know what to do exactly to be successful logging in and also...

Let me know what to do exactly to reproduce the issue and I will tell you what I think.

a. Sorry for the missunderstanding

b . Im running XP pro and done what was explained

c. The iis stops responding - Till I make iisrest

thanks

Ran

It's not normal at all. My guess you accidently edited the code in a bad way.

(thats the same code the every guestbook in every application I sell uses including ASPGuest which gets downloaded for free about 50 times a day)

No one has ever said it acted funny.

I would do a default installation with the original code somewhere and see if the problem occurs. If it does I can take a look.

In the meantime I wouldn't be running that as it is probably using up massive processor time because of whatever is wrong with it. 

Chris -

Long time no talk, which is a good thing.  I have purchased another product from you, ASPVendor.  I am running into an issues.

When I try and remove the image through the image manager, it does not remove it.  Screen shot attached.

2005-10-19_194248_image_upload.zip

Thanks

Yea.. that error is totally because the asp pages are looking for fields in the database that are not there.. and causing a nasty loop.

if using the option pack you must go over the directions very carefully...
Make sure everything works step by step..

After upgrading to option pack code you either need to upgrade the database from the base system or use the newer database provided with the option pack.

Then.. you want to test every function of the groups.. if pages act slow and seem odd... especially the groups page and edit users page..
Then your not using a valid database. Either you didnt upgrade the old one, are not using the new one, or your connecting to an older verison by accident and not realizing it.

That's pretty much it...