can add photo album but after i upload a pic, nothing shows.

where do i look to research why pics aren't showing in the albums

Our webhost changed converted all sites from c: to d:, and without us doing anything else, our customers now get the following error message when trying to access our Classifieds site:

***********

Microsoft][ODBC Microsoft Access Driver] Not a valid password.

This means there is most likely a problem with the "ConnectionString" info that you specified.

If you are using a DSN-Less Connection with MSACCESS.

Check that the physical path to the database has been specified correctly.
It has to be perfect and correct. It cannot be specified using "http://" or by using "server.mappath".
It has to be specified like the following example.

ConnectionString = "DBQ=D:\Inetpub\wwwroot\advpass_pro\_database\passwords.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=admin;PASSWORD=Xpass"

If this is running on an NT server or Win2000 Server make sure that permissions have been set on the database.
Only the server admins can do this. If you are not the admin you will have to ask for this to be done.

If you are using a System DSN

It is not set up correctly. Again, make sure the permissions have been set for the database and that the system DSN has been set up correctly by the server admins.

************************************************************ *********************

We did everything the web host asked us to do, that is, changed all references to the C drive to new references to the D drive, but the error is still there.  We also never changed any passwords (as far as we can remember).  Can someone please tell us where to look (also which file might tell us what the correct password is in case it has in fact been changed.

Hello,

Yes, that is how it works. Unless you make modifications to the code there is no way to easily do what you are talking about.

If you design the site to be intelligent that scenario should never happen.

For example.. you should only be offering links to pages that the current logged in user has access to. You do this by checking the session variables and with simple if-else logic around your html links.

It requires some work but if you dont give them links to pages they dont have access to what you are talking about will not happen.

Here are some simple examples.

Here is an example using access levels.

<%
If Session("Access_Level") = "1"  Then
' show links to pages that allow access level 1
End If
%>

And one for groups..

<%
If Instr(Session("Groups"),"*6*") or Instr(Session("Groups"),"*7*") Then
' show links to pages that allow groups 6 and 7
End If
%>

You would carefully use the built in features of access to import/export data.

The password for our databases is noted in the documentation. It's pretty hard to miss really. You can also see the database password by looking at the connection string info.

different versions may be different but it is usually "temp" minus the quotes

Three questions here:

1. I am having a problem with characters being displayed properly when viewing listings. Some alphabet characters and punctuation characters do not display properly when viewing the pages.

Sample here:

http://www.hibari2.com/lanoitanretni/kokusai_profiles/view_i tem.asp?Ad_ID=102&CatLevel=2&Cat1_ID=3&Cat2_ID=& amp; amp; amp; amp;Cat3_ID=&Cat4_ID=&FromSearch=True&SearchPage =%2Flanoitanretni%2Fkokusai%5Fprofiles%2Fdefault%2Easp%3FCat Level%3D2%26Cat1%5FID%3D3

In the access database I was looking at the properties for the ‘Ad_Custom’ fields. Unicode Compression is 'Yes' but IME Mode is set to 'No Control'. I wonder by changing this to ‘Hiragana’ if will solve the issue.

Note: the essays are typed in English on computer with Japanese OS, and then pasted up. Even though they are typed in English, there are several setting that may affect the output.

2. I want to reverse sort order for listings instead of listing 4, 5, 6, 7, I’d like to sort 7, 6, 5, 4… Could you tell me which page has to be edited, and in simplest terms what has to be changed?

3. Also, I’d like to increase the default display of ‘items per page’ from 25 to 100. Could you tell me which page has to be edited, and in simplest terms what has to be changed?

Thanks

Sorry you feel that way, not my intention. I'm not threatening anything. I was very happy you responded when did so there no reason for any bad feelings. I like your product as I said before and have no problems with it. Sorry again, that was not my intention. Merry Christmas…

If they changed the paths they moved the site.

That means permissions for the database folder must be set again.

If permissions are not set and you are not using the correct new path info then you will still get errors.

Those errors the server reports back and quite generic and do no mean exactly what they say. They just mean everything is not perfect.

And everything just has to be perfect..

you actually dont touch any of those
UploadDirectory = CmdGetConfiguration("UploadDirectory")
They get set from the config table in the database which gets edited in the admin area.

so...

I am talking about the settings area in the admin area of the applicaton.
Every setting there is descibed in detail. You get there and change serttings there via the web browser and by logging in as the admin.

Log in to the online demo as admin and check out the settings area if you are confused.
http://www.aspphotogallery.com/demo_pro.asp

To hopefully wrap this thread up...

This user showed me his site and things were working for me as they should.

We came to the conlusion that the weird behavior he was experiencing was because he was using AutoComplete in Internet Explorer....

It was automatically filling in the fields with his username/password that he had autocomplete save.

So it was a web browser usage issue.. not the code.

I am having an issue with the Thumbnailing process. My host does not support ASPImage so I have to use something called asp thumbnailer which is similar to ASPImage. I am trying to modify the Dundas upload to automatically reduce the images to create thumbnails. I ripped out the asp image code and replaced with the bottom. The main issue I believe is grabbing the image files. I am not sure how to name the actual image file that is already uploaded by the dundas upload. the code is below:

The peices in red are where the issue is I believe. What you see below is my attempt to identify the exact image and then rename it tthumbnail. My optimal solution would be to take the picture, resize it and rename it exactly what it was named before.

Any ideas

Thanks

<% Else %>

<%
 Dim thumbObj
  
 Set thumbObj = Server.CreateObject("ASPThumbnailer2.Thumbnail")
  
 If thumbObj.LoadFromWeb("../pictures/" & Filename) Then
     thumbObj.ThumbMaxDimension = 140
     If thumbObj.CreateThumbnailToWeb("../pictures/Thumbnail.jpg") Then
         Response.Write("Thumbnail successfully created.") 
     Else
         Response.Write("There was an error creating the thumbnail.")
     End If
 Else
     Response.Write("<p><hr><b>Unable to load the original image.</b><hr>")
 End If

 
Set ConnClassified = Server.CreateObject("ADODB.Connection")
ConnClassified.Open ConnectionString
Set cmdTemp = Server.CreateObject("ADODB.Command")
Set CmdSetImageInfo = Server.CreateObject("ADODB.Recordset")
cmdTemp.CommandText = "UPDATE Ads SET Image" & PicNumber & "_Uploaded = 1, Image" & PicNumber & "_FileExtension = '" & FileExtension & "' WHERE (Ad_ID = " & Ad_ID & ")"
cmdTemp.CommandType = 1
Set cmdTemp.ActiveConnection = ConnClassified
CmdSetImageInfo.Open cmdTemp, , 1, 3
%>

When I attempt to upload, it appears that the image uploads. I get a "Original Image Size 0 X 0 pixels"

they don't appear in the web pages, any thoughts? I am using VBscript to upload, my host has safileup but I am unable to use it in this script, thanks for any help

http://mcintoshcounty.org/real_estate/extras/server_info.asp

here's the site link

Never mind, had the path to the image folder screwed up 

Okay thanks, I'll have to consider wether or not to go down the path of the upgrade or cut my losses as the Access cannot handle the pressure

It's just errored out again with the following message:

msxml3.dll error '80072ee2'

The operation timed out

/forum/banner.asp, line 15

Regards,

Dave

The only reason no one else asked this many questions is possibly because they didnt NEED the functions i am TRYING to do.

We offer tech support for installation of the base application purchased in it's native form.  In other words were not planning on spending weeks holding your hand and teaching you how to build your application or modify the one you bought. Not because anyone wants to make it hard on you but because there is a practically infinite number of things someone could be trying to do and the only way to give you the exact answer would pretty much involve either writing it for you or having a look at your code to see what the heck your doing. Sorry but my time isn’t cheap nor do I have a lot to spare. I already gave you my approach on what to do and what you should be looking at but obviously you’re not catching on. SO ONCE AGAIN, PLEASE LOOK AT THE SOURCE CODE AND DECIDE HOW YOU WANT TO HANDLE YOUR END OF THINGS BASED ON HOW THE APP DOES ITS THING. I really don’t know how I can be more clear that that. I don’t have a crystal ball that can tell me where you’re going with your own code, what the final requirements are... what field you want to add or remove for the database etc. There is a demo up that everyone can look at and play with so they can get a feel for how the things behave and look. It’s not my fault your naivety led you to believe you could do anything with it in ten seconds. I mean if I just add some wings to my car maybe it will fly, and if you just add a shopping cart and a few products maybe you can start your own Amazon.com with that software right? Sounds good to me…

It would take me longer to re-write YOUR code than it would to have LEARNED ASP.NET and made MY OWN.

Well thats one thing we both agree on, I bet it would take you a long time to rewrite the code when you dont know how to write it in the first place. By you own admission you dont know enough about what your doing to be messing with a .NET app at this point. Maybe you should take your own advice and LEARN SOMETHING ABOUT IT. What’s even worse is that application isnt even complicated, its 101 stuff honestly. One class, thats it! Your not looking at thousands and thousands of them that you will have to read and comprehend. If you can actually “read” the code we kept it lean and mean and to the point. Nothing strange or random, no references to a zillion things all sprinkled here and there. Its reads like a book if you know the language. That’s why developers buy these apps all the time. Not because they couldn’t write one themselves, but because they know their time is valuable as well and for $150 which is less than most get paid an hour they couldn’t be bothered. Furthermore we both spend a lot of time making sure these apps are "dumbed down" so that the average programmer without a lot of object oriented background can pick up the coding style tweak it if they need to. Some people do modify things to suite their needs and others are happy with our apps "as is".

Just to recap we already wasted two days yappin about your jacked up servers and after you went through THREE of them and finally got one working you said the code was working. Red lights started flashing in my office by the time you got to the second screwed up machine, but hey weird things happen so at that point I wasn’t 100% concerned. Technically we could have and possible should have cut you off there as the policy in place is pretty clear about us not being your tech support crew when it comes to getting your machine working properly (especially one we cant even look at). Go check those posts again both Chris and I were answering your questions and being as helpful as anyone could possibly expect.

Several more days have been spent answering questions about how to modify your application and again that’s not our responsibility and we don’t support modified versions of the software for all the reasons that should be obvious. No software company does and if I have to explain why that is well this conversation is beyond hope.

Bottom line is the responsibility to support that application ends the moment you get it running the way it was shipped. Were pretty damn decent about going above and beyond and a lot of the time we go into things we shouldn’t have to. If you have well thought out and specific questions by all means ask, this isn’t some sort of thanks for your money now get lost operation. CJWSoft has been around since the beginning of Microsoft’s entrance into the web application market. We have thousands and thousands of happy customers because we are developers and enjoy working with other developers along the way.

You’re not the first N0oB to show up, but you’re the first one I can think of that ever tried to tell us we didn’t write the apps we sell and essentially wanted to argue that we don’t know what were talking about. Meanwhile you should have been done with your thing days and days and days ago, not in here yapping off and showing your ignorance to the other developers that regularly browse these forums. You trying to tell me how CafePress works is a joke, I happened to have been part of the team that worked on the first few revisions of that site and again you really didn’t even understand what I was getting at in that last post. LINK TO LOGIN PAGE not link to every protected page on the site.

If you think I am pissed off at you, your wrong. I'm just irritated with the whining about this and that and rather than admit your over your head you come back with half baked remarks that only make sense to you. If you think you can google a few terms and come back here talking smack like you’re actually someone that knows what you’re talking about your just making a fool of yourself. You sound like a guy from China trying to tell me how to speak English... My advice is get a few books and start learning or try actually reading up and listening to the other bazillion knowledgeable developers out there that do a great job posting articles about the subject. You might just learn something and actually get your project finished before 2010 and when you do please come back and re-read your posts with "enlightened eyes" so you can see what a goofball you are for saying half of the things you have said. I am not in the mood to keep helping you get your project done step by step. I have huge projects of my own going on and if I thought you could actually provide a descent project specification I might offer to make the changes for you at a serious discount so you could go away and everyone would be happy. Problem is I dont get the feeling you could explain your way out of a paper bag let alone provide a group of programmer the techinal specs for your project.

Your best bet is to post a link to the start of this thread at www.AngryCoder.com I'm sure a  few of  people over there would be more than willing to give you a ton of usefull advice

Google 4GuysFromRolla… a great resource site with example, just dont come back here  telling me those guys/ladies posted things that dont work either.

Chris has written hundreds of articles on PowerASP, a great place to start looking as well… www.powerasp.com I've been spitting out code for longer than I can remeber and I still look thing up on this site because its LOADED with great info. That happens to be one of the very first ASP sites that went up on the net so lets just say he knows a bit or two about the subject.

I'm sure your frusturated but your pushing your luck seriously. 38 posts about this subject in a week and your over there hacking away on your virus infested WaReZ machine which isnt exactally the ideal development rig. I mean we provide the code and your supposed to provide at the least a very basic knowlege of what your doing and a production grade platform to test it out on. To me thats like buying a car and then asking how to drive it... then bugging the dealer to teach you and when you smash the thing complaining because no one told you that your not supposed to drive into a wall. I have the same policy as the dealer, show me something wrong with the car from the factory and we will fix it for you NO QUESTIONS at all with our appoligies, but really once you take it off the lot what you do with it is your deal and its not our responsability in the least.

Also, I found this page which specifically talks about hidden IPN form values to change currencies

https://www.paypal.com/us/cgi-bin/webscr?cmd=p/acc/ipn-info

mc_currency	For payment IPNs, this is the currency of the payment. For non-payment subscription IPNs, this is the currency of the subscription.
	"USD"	The currency of the payment is U.S. Dollars.
	"CAD"	The currency of the payment is Canadian Dollars.
	"GBP"	The currency of the payment is Pounds Sterling.
	"EUR"	The currency of the payment is Euros.
	"JPY"	The currency of the payment is Yen.

If things are not perfect there will be no log files and no errors.. it can only be one of these things really
http://support.cjwsoft.com/code/moreinfo313-2.htm

You may also want to make your the filesystem on the server is working and not disabled by norton script blocking or anything random like that. Testing the filesystem object is best done by writing a simple text file to a folder. Plenty of examples of doing that can be found at www.aspin.com

Recent activity is temporary and admin activity in the admin area is not tracked. If your application in IIS has reset or there has been no activity in the users area or in pages you protected there will be nothing there. The busier your site the more chance something will be there. For example usually our online demo has something there except right after 4am when my server does an iisreset.

in the version you have changing it is not something we covered

I believe you will find it the "config_inc.asp" file in the root though... be careful with naming it though because if you use any spaces or weird characters it might cause issues with various functions in the application like emailing.. I recommend just using letter, numbers, and maybe dashes

My Admin user got corupted, and I need to reset the password and user, what is the defualt password for this database, as I do not think I have changes this (hopefully) as of yet.

Regards,

Paul

Chris,

Yesterday when I would access the get_me_in page with the password key, I was then taken to the default login page.  It did not give me the option to create a user. 

Today, when I entered the password key into the get_me_in page, I was taken right to the create user page.  So, yes the problem has been resolved.  I have no idea why though.

Yeah, its working great witht he Access database. Now I just need to get it all set up. I like how the config file is set up with all the comments, it really helped allieviate the 40k thumbnails, .

I really need more info on what you have going on?

This can sometimes be cause by a slow server / bad data connection.

Sometimes caused when someone is using the option pack but did not make the proper changes to the database.

Sometimes caused when a user adds users the database on his own and does some "incorrect" things..

The more details you can provide the better. Think of anything and everything and describe it.

SQL or MSACCESS... version of either
Server OS
Using Option Pack or not
Did you have your host set permissions...

etc etc etc

ok, here's a test page:
http://www.galvinelectricity.org/download_link.asp

user: test
password: test

Our company just got new computers, so everyone here has the same set-up, all Dells, all about 3 weeks old, all Windows XP.

But I did realize after reading your post that I am using Firefox and everyone else was using IE. When I used IE, I was able to duplicate the error.

But, alas, I am unable to resolve it. Client will be using IE, no doubt.

if that account isnt there thats normal because if it doesn't have any permissions for that folder so it wouldnt be listed

you simply dig into the menus a liitle deaper and find it then add it.

No problem. I get it now.

I added a Session Variable for "Counter". Then wrote an If statement around that. When the user logs on for the first time they see a window pop, after that the normal start page.

Thanks

I would look on the pictures folder on the server and see what is there for pictures. Also, when you see a broken X on the site right click and see where it is trying to get the picture from and what the pictures name should be.

I would also be sure to clear out your temporary internet files in IE. clost and restart all browsers..

maybe show me the site ? so I can see this happening ?

if you use either of those options the mail server info you use must of course be valid (example: mail.somesite.com) your host can provide that info

you should also make sure your sending the emails using an account at your email server.. not some other email you have


other than that if it does not send emails it could be because your hosting company may require authentication for outgoing emails...

ask them ...

if that is the case the version of ASPBanner you have does not support sending email that way and you would need to add the necessary code to any places that send email... in order for emailing to work

yea.. it sounds like aspimage is not working right.

You wont get any errors..

I would suggest using some of aspimage's sample asp pages in your web and see if they do their thing. You need to be sure aspimage is working correctly under the ,ost simple of circumstances

Though ASPImage is the standard in ASP image resizing and has been around forever and it works very well. Their support is almost non-existant.. in 6 years they have never answered any email I have sent them. I have sent them 6 or so over the years and then just stopped trying. I bought a server bundle too way back then for like 300.00 or so when we had a company called gisco. You would think they could answer my emails. I think that guy just made a ton of asp components back in the day and then just took a seriously long vacation. Updated them a few times in between when he felt like it and making good money the whole time.. More power too him I guess. I'd love to be in his shoes when he sells an enterprise license for 3000.00. Maybe he isn't even around anymore and the someone he knows just kept the sales going. Who knows..

Anyway... it does a great job when ya get it working.

Personally this is how I install it and it works every time.
I like to put their dll in the system32 folder.
Register it.
Run their licensing prog to make it a full version if you paid for it yet.
Right click on the dll and give the "everyone" account modify permissions
Right click on the "windows/temp" folder and give it the same permissions

I have narrowed it down.  The ../ for includes will not work with .asp files but will work in .shtml files.

any ideas?

I dont know about your error on line 6 when uploading..

as far as the manaully edited import file not working I would really need to see it. There has to be somethin wrong with it's format.

I really need more information and possibly acess to the system to do some troubleshooting...

This is anot a feature anyone has ever had an issue like this with.

rrabago

I have been looking over the code and also doing some tests.

So far everything in the code looks correct and everything I have tried has worked correctly. If I select an access level and active users it is not sending emails to inactive users as you stated.

Are you using the option pack ?