I did try to redit the banner and the old link was there, not the new one.  In addition I tried to ad a new banner to an account but it too was not saved.

Since I can see the banners from the aspbanner solution, does that not tell me that the solution is properly connected to the database?  The only thing is the solution only appears to be able to read the data and not write or delete it.

The settings for the directory are read write execute and delete so I am not sure what I need to do to get it working again

ok, that probably means the physical path you have set for the logfile directory (in the admin settings area) is not correc t

the error pretty much means just what it says

Hi Chris,

I tried changing using Notepad in the config_inc.asp

from:

If  Application("SERVER_SOFTWARE") = "" Then
 Application("SERVER_SOFTWARE") = Request.ServerVariables("SERVER_SOFTWARE")
End If

To

Application("SERVER_SOFTWARE") = "iis/6"

and the albums still do not show up under the categories

Rhona (rookie)

You are not supposed to use "../" with a virtual include

Thats goes against what a virtual include is and makes no sense.
When using a virtual include you give the path as if accessing from the root of the main web / virtual directory

I find it very hard to believe it ever worked like that and if it ever did it was wrong.

The version of aspbanner you have should not matter.

What you are doing here is wrong.

<PARAM NAME=movie VALUE=" http://www.innovationtools.com/aspbanner/aspbanner/banner_re direct.asp?Banner_ID=25">

PARAM NAME=movie is supposed to link to your ".swf" file.
And thats why all you see is black.

I don't think you quite understood all of that information fully.

Your ".swf" files needs to be coded in FLASH to link to the aspbanner redirect url. You don't change that flash calling code like that.

The ".swf" file links to the aspbanner redirect url which tracks the click and then redirects the user to the Link URL

You basically need to code your ".swf" flash file to go to that aspbanner URL or code your flash file so it can take a parameter for the url it clicks to (like the macromedia article talks about. This has to be done when editing the flash file in the flash editor before the file is saved.

If you dont have access to the original ".swf" to edit it and re-save it.. your out of luck as far as tracking clicks goes

See, and that's what I thought.  What's interesting is that if I call either an aspx page or an asp page in the iframe tag, it asks me if I want to open the page, it doesn't display it.  I'm using IE6 so there's not problem with the support for the tag.

I'll keep looking to find out what's going on. I think the iframe method might work best.

JDooley

I checked the option pack code as well and it looks correct.
I tested it and it acted as it should.

You can see it in active at the live demo
http://www.aspprotect.com/demo3/demo.asp

admin
test

go the the admin area.. you will notice 3 users with level 4 access
1 of them is inactive

then go to the mass email area and pick   active and level 4
it will say it is sending email to 2 users which is correct

then go to mass email again and pick level 4 and inactive
it will say it is sending email to 1 user which is correct

choose any status and access level 4 and it will send email to 3 users which is correct

When you do this please realize you can not choose a group as well.
That will cause a problem because you can not choose a group and an access level at the same time.


Anyway... perhaps you can private message or use the contact us form and and let me take a look at your system. Since I can't reproduce the behavior that is the only way we might figure this out.

Hi,

That is not enough to go on. I need details in order to help.

I was actually able to do similar thing by allowing our dedicated search engine to access the site unchallanged.

<%
If Trim(Left(Request.ServerVariables("HTTP_USER_AGENT"),11)) = "MYPASSWORD" Then  
 SearchFlag = True
End If
 
If SearchFlag <> True Then
If Session("Access_Level") > CHECKFOR or Session("Access_Level") = "" Then 
%>
<!--#include virtual="/Auth/check_user_Code.asp" -->
<head>
<title>My Title</title>

</head>

<body>

My Protected stuff here

</body>

</html>

For this to work, the search engine must pass the PW to the web site. I just was not sure how to do the same thing with IPs. I will play with the code and see what happens. If it works, I will post it here to help others, if this is OK with forum rules.

Thanks,

Mo

You edit the web.config file that came with ASPProtect.NET.

You find this tag

  <customErrors mode="RemoteOnly" />

you change it to this

  <customErrors mode="Off" />

If you have a different web.config file in your root I suggest you make sure the tag is set to off there as well for troubleshooting sake

If done correctly you will get a detailed error
It's basic low level ASP.NET stuff really and does not have anything specific to do with ASPProtect.NET.

You also need to make sure your web is set up correctly for ASP.NET and that the correct web.config's are firing..etc etc

I've encountered another problem.  When i edit the link for existing banners and save it, the banner reverts to the old link instead of the new one.

The directory where the the database is located to rwed so the permissions is not a problem.

Any advice?

Thanks

I have just purchased ASP v7 and loaded.  Followed instructions.  Obtained codes not prob.  Get to single field login screen, enter password and following page appears:

Method Not Allowed

The requested method POST is not allowed for the URL /temp/aspprotect/password_admin/get_me_in.asp.

Added folder aspprotect under (temp web) folder - temp, but also tried under root folder of web site.

Still no luck.

not really, aside from looking in paypal and manually adding each one for each user...

how many users are we talking about anyway ?

and were any of the users new sign ups from scratch because if they were and that field didnt get populated that is weird?

ultimately aspprotect does not use that field. I was just storing it for the sake of storing it... so its not a big deal but I would still like to figure out what is going on

removing the expiration dates from paypal subscripbers will be enough to fix the issue your having about them getting the expiration notifications

no, there is not not.

If you wanted to to that you would have to add some code to check their album count in the database and not allow them to make a new album if they were at the limit.

I do not have any programming knowledge and have what might be a simple question.

I am having a hard time getting my hosting company to modify the rights on the data folder. They state they support ASP and access databases however this is the response I got when I requested the modify permissions set for the internet guest account:

Were the rights changed on the data folder?  No, we do not manage rights to folders.

My question to you is: Doesn't supporting asp require those permissions be set on the database folder or can asp (not just aspprotect) work without those rights modified?

Thanks

(Password_Email_Confirmation_Mod) for ASPProtect Version 7.x

This will change the basic registration pages so that the email address and password entered must be confirmed when signing up. This eliminates the auto generated password during signup.

Some may prefer it working this way.

Directions:
Back up your existing ASPProtect installation.

Copy the two new files into your "users" folder

"register.asp"
"add_new_account.asp"

2005-12-01_182201_Password_Email_Confirmation_Mod.zip

Hi Chris,

Thank you for your prompt response.

Our current project requires alot of customization.

Yes, the error is probably a data problem and not due to your code, because we needed to make modifications to the database.  But that's why debugging would be helpful.

Basically our intent to modify the asp protect code stems from the fact that our client doesn’t want certain fields to be recorded or to appear: address, city, state, zip etc…

We are happy to be able to modify the HTML, but we also want to modify some other default behavior, such as which page opens when the "cancel" button is hit in the editaccountinfo.aspx page.

More Upgrade Info

To upgrade an existing ASPBanner system please follow these steps.

Back up your old system completely before starting.

Install the new system per the installation instructions that came with it.

Once it is running simply use your old ASPBanner database with the new system.

You may also want to keep your banner images folder from before in the same location so your existing banners still link to valid image urls because the new system stores banner images in a new location.

Since the config table in the database is no longer used you will need to go to the settings screen of aspbanner again and configure things. The config table in your old database can be deleted or left alone. It won't be used anymore so it does not matter either way.

That is all there is to it. If you have any issues please ask in the forums and we will help you out.

trust me, they (serverobjects) do not check processors.. as a matter of fact they haven't answered support emails for about 3 years. All they do is sell those components like hotcakes and take in mad crazy cash. But I will say the stuff does work well and always has. (that guy probably took all the money he made/makes from those components and took off to Jamaica or something sitting on the beach drinking margaritas)

regardless,
ASP just cant resize pictures on it's own.
It' just not possible. You need a 3rd Party component.

There isn't much to say about the ASP.NET thing.

If your server has ASP.NET installed (meaning you can run aspx pages on your server and the ASP.NET framework is installed) and running you just pick that option in the config file and ASP Photo Gallery will use ASP.NET to make dynamic thumbnails for you.

To run ASP.NET it must be a 2000 or 2003 server.

Probably not... javascript calling complex javascript is not a good thing and is often a problem.

I would try one of the other methods such as the xml parser if possible.

ok...

you got problems if you cant import a file created by the system..

You using SQL or MSACCESS and do any of the users data have apostraphes in it ?

Well, I assumed I'd be able to tweak this thing but it is all so intertwined it doesn't pay to mess with any of the files. Hence, I'm going to have buy a different system only a week or two after buying the unlimited version here.

As I leave I want to give you some impressions here. While the system is low-cost, the 99 dollar version is missing a few pieces that I think would bring the value to 99. It is one thing to talk about the speed/performance, but to a degree that's hard to measure, and to anyone with web advertising on their site, performance will always run second to potential site income.

It definitely needs a user interface and registration for advertisers, and it definitely needs a single variables file for changing the hundreds of variables for which there is no control. I had to search on my own just to change the look and feel.

Lack of multi-zone support is a serious drawback. I would submit that anyone with a serious website needs it, and will gladly pay you 139 over 99 for just that one feature.

Take them or leave them, they are just suggestions.

Umm, if your using MSACCESS your using MSACCESS

SQL server has nothing to do with it.

and the permissions, how exactly were they set ?
I find a lot of customers think they are setting permissions correctly when they really are not. That's why I wrote that long article on the subject.

As you probably know a data connection is a very low level thing. It is the foundation of any ASP application that communicates with a database. Unfortunatly it sometimes takes a while to get the hang of setting them up without issue.

Everything must be perfect.. the ODBC drivers must be up to date, folder permission are critical, sometimes you must use a new version of the access database.. etc etc etc  The errors and things that happen when all these things are not perfect and not helpful as you have found out.

I would suggest you download and get ASPTest from CJWSoft running before you go any further. It is designed to be as simple as possible and helps get a hang of the database setup process.

Okay Chris, I wold like to get rid of the encryption then if it's not too much trouble.

I have no option of running the production server against an ms access db, since the db needs to be online and accessible from another system.

dsn-less is the way to go..
http://support.cjwsoft.com/code/moreinfo9-2.htm

you also need to use newer versions of the database as the odbc drivers on the server are sometimes very new and no longer work with access 97 databases

Why all the pages at the directory .../password_admin/ are very slow to open online?