On second thought guys, it would must easier to change the code using modulus as follows:

<% If PicIndex mod 6 = 0 THEN %> 
      </tr>    
      <tr>
<% End If %>

This will end each row and create a new row after each 6th picture. It'll be must easier code to work with and change.  This code must be placed in the PicIndex For Loop.

If you have any questions, JPortnoy@Checkernet.com

Hello,

What is the difference between the paypal_sub_signup and the paypal_signup directories?  Also, I know it depends, but what directories and files can I delete from my web server if I am not using them?  I copied the entire set of files that came with the program over to the webserver and I am concerned that there is too much out there.

Jess

I really do not know for sure, but I imagine there are customers using their windows hosting. Usually I do not know what hosting company a customer uses and I am usualy the only one that responds to forum questions.

Why not download the current Free lite version and try it out ?

CJW

Christopher

I have gone back to your original files and uploaded them to another server folder and instead of using a DSN I have tried this with a DSN less connection and changed the database to MS Access 2002.

This has corrected the problem.
I will check this out again using the DSN with access 2002 to see if this was the problem. It may be something to do with an older format of database on this particular server.

I will let you know what I find.

Thanks for your  quick reply.

it has been 3 days since I logged myself in under Admin, and all the user information on the User Activiy screen seemed to be gone.

is there any specific length of period it refreshes its user information??

and the permissions, how exactly were they set ?
I find a lot of customers think they are setting permissions correctly when they really are not. That's why I wrote that long article on the subject.

As you probably know a data connection is a very low level thing. It is the foundation of any ASP application that communicates with a database. Unfortunatly it sometimes takes a while to get the hang of setting them up without issue.

Everything must be perfect.. the ODBC drivers must be up to date, folder permission are critical, sometimes you must use a new version of the access database.. etc etc etc  The errors and things that happen when all these things are not perfect and not helpful as you have found out.

I would suggest you download and get ASPTest from CJWSoft running before you go any further. It is designed to be as simple as possible and helps get a hang of the database setup process.

I'll give it a shot loading it on the laptop and publishing it, if it doesn't work I'll let you know and you can take a look at it tomorrow afternoon.  Thanks for all the help tonight...

Good luck pouring that concrete!

Well, I assumed I'd be able to tweak this thing but it is all so intertwined it doesn't pay to mess with any of the files. Hence, I'm going to have buy a different system only a week or two after buying the unlimited version here.

As I leave I want to give you some impressions here. While the system is low-cost, the 99 dollar version is missing a few pieces that I think would bring the value to 99. It is one thing to talk about the speed/performance, but to a degree that's hard to measure, and to anyone with web advertising on their site, performance will always run second to potential site income.

It definitely needs a user interface and registration for advertisers, and it definitely needs a single variables file for changing the hundreds of variables for which there is no control. I had to search on my own just to change the look and feel.

Lack of multi-zone support is a serious drawback. I would submit that anyone with a serious website needs it, and will gladly pay you 139 over 99 for just that one feature.

Take them or leave them, they are just suggestions.

you basically have to edit the html in the links in the various pages and remove them... some are in includes files

use a text editor and be causious / back things up before you remove links so you can revert back

ok, I moved this thread..

The code in the ASP application handles all encryption and un-encrpytion of passwords in the database. I uses the vbscript RC4 function and the password encryption key specific to your installation to do this.

The whole idea is that if someone gets your database and opens it up that they will not get the passwords (utilitiies to crack access databases are common and work well so they can easily get by the main password)

That being said when you open the database manually your not supposed to see clear text passwords. Your also not supposed to have an easy way to make them clear text. It's a security thing. 

Though I am not officially supporting it I will tell you what I think would be the easisest way to make an export file with clear text passwords in it.

Use the export fire creator in the admin area of aspprotect.
Mosdify "export.asp"

change

Password = CmdDataExport("Password")

to

Password = RC4(CmdDataExport("Password"), PasswordEncryptionKey)

Then make an export file and see if that worked.
you can then import the export file into and access database or do whatever you like with it.

Hello,

If you are using ASPProtect Version 7 it is possible because version 7 supports html emailing. In any other version it would require some custom coding to add html email support. You would have to sort it out by experimenting and editing the emailing code. All the email methods have documentation on the web in some form or another showing how to send html emails.

Also,
sometimes depending on the email component being used and the email client reading the email a link in a text based email will get hyperlinked automatically. For example outlook usually will do that, but it doesn't always in other situations.

Lastly, we have special upgrade pricing should anyone want to upgrade to ASPProtect Version 7. It really has a ton of great features.

Best Regards,

Chris Williams
www.CJWSoft.com

sure and thats probably what you should do... that pure asp upload thing must not be able to handle the size of your import file... another thing which can very .. also some versions of IIS require registry changes to upload bigger files via asp code alone

ASPProtect v7.x runs on Microsoft IIS servers only.
That means Windows XP Pro, Windows 2000 server and Windows 2003 server. The web server must have ASP support enabled and support Data Connections. 99% of them do as it's a pretty normal thing, but you should ask and make sure your hosting plan supports it.


Before you even start please read this thread and do what it says.
If any errors show up it is important you see the real error instead of a useless HTTP 500 internal server error.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=11& PN=1

Once doing that make sure to use Internet Explorer as you follow along with these directions.

Now, unzip your installation zip file that you downloaded from CJWSoft.
Use a program like winzip and be sure you have it set up to unzip the directories as well. You can also use windows xp's built in folder compression tools to unzip the archive.

When you unzip the application you should have all of the following folders and files. (more or less, it depends on the version)

Now, you can copy all of these files into the root of your website or if you like you can make a folder called "aspprotect" and put all of these folders and files in that folder. Either way it really does not matter.

Now, contact your web hosting company and instruct them that you need permissions set on the data folder that you copied into your website. This folder and all of its child folders need modify permissions set on it for the anonymous webserver account. It is very important that they set the permissions correctly and on all the child folders as well.

Here are some threads on exactly how these permissions are set.
If you run your own server or are developing locally you can do this yourself. If not most likely you need to put in a request to your hosting company as you CAN NOT set these permissions via Frontpage or FTP.

Windows 2003 Server and permissions
http://support.cjwsoft.com/forum/forum_posts.asp?TID=136& ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ;PN=1

Windows XP Pro and permissions
http://support.cjwsoft.com/forum/forum_posts.asp?TID=56& PN=1

Once permissions are set.. run this page via your web browser

http://www.mysite.com/data/setup_info.asp

Replacing the part in blue with your website info.

When this page is run it will report back a screen like so:



Now, take the connection string info it shows you.
Edit the "dataconn_inc.asp" file in the root of the ASPProtect system and use that data connection information. It should be valid for the server.

If you are using MSSQL server instead of Access please see the SQL database creation directions as you will need to create the MSSQL database and use a special connection string for that.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=160& ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ;PN=1

Now, take the CookieEncryptionKey and PasswordEncryptionKey info that it gives you and enter it into the "config_inc.asp" file in the root of the ASPProtect system. These will be the unique keys that your encryption will be based off of.

Ok...

The files have been copied to your website, the permissions are set on the data folder, and the database connection is ready.

Now.. run this page

http://www.mysite.com/password_admin/get_me_in.asp

Replacing the part in blue with your website info.

This is a special page we use to get into the system for the 1st time.

If you get a nasty error when you run that page similar to this.

Error Type:
Active Server Pages, ASP 0131 (0x80004005)
The Include file '../dataconn_inc.asp' cannot contain '..' to indicate the parent directory.

Then parent paths are disabled on the webserver and you need to do an extra step to deal with that. Follow this link.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=162& ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ;PN=1&TPN=1

If you get any other variery of "80004005" error then there is a problem with your data connection.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=27& PN=1

Those errors are usualy related to database folder permissions or an imcorrect physical path to the database file specified though they can mean a lot of things.


Once you get the page running you will see a login prompt and one form field

You will need to paste the "PasswordEncryptionKey" value that you used in the "config_inc.asp" file in the form field and hit enter.

If all goes well you will see the admin area of ASPProtect.

Now that you are in the system you need to create an admin account.

Click on "ADD NEW USER".. fill out the info and add a user.
You really only need to fill out (first name,last name,email,username,and password)

Now save that user.

You should see a new user listed in the admin area. Click on Edit user to the left of the new account. On the edit screen check the "admin" checkbox and save the user.

You just created an Admin account.

Now click on the "log off" button on the top menu and click yes to log off.

Now close the browser. Then run this URL

http://www.mysite.com/password_admin/default.asp

Replacing the part in blue with your website info.

You should now be able to in to the admin area of the system using the new admin account you created.

You are now ready to go to the settings page so click on the settings tab in the menu. There are a lot of options and paths that need to be set on this page. Every setting is described in detail on this page. You need to go through the page and set things up properly. Anytime the page asks for a path to a url or file the page will auto generate what should be the path to use. (expected path) If your server has parent paths disabled a few of those auto generated paths will not show up. If that is the case run this url from your server and it should tell you the paths to use for those settings.

http://www.mysite.com/data/expected_paths.asp

Replacing the part in blue with your website info.

Once your all done and the system seems to be running fine you should go back and delete the following pages as they are no longer needed and pose a potential security risk.

http://www.mysite.com/data/setup_info.asp
http://www.mysite.com/data/expected_paths.asp
http://www.mysite.com/password_admin/get_me_in.asp

You should back up the original zip archive you got from CJWSoft in case you ever need those files again.

VERY IMPORTANT: The user passwords from now on will be encrypted using the "PasswordEncryptionKey" you specified in the "config_inc.asp" file.

If you ever change that key all of your passwords will be invalid and you can not get them back unless you know the key and put it back, so plan on never changing that key unless you really know what your doing and know how to decrypt/re-encrypt the passwords using a new key. (something we do not cover at the moment but probably will when we have time to make a tutorial) 

in that file "upload_post.asp"

change

<%
If Session("Admin") <> "True"
 Response.End
End If
%>

to

<%
If Session("Admin") <> "True" Then
 Response.End
End If
%>

Hi,

I have just one quick question, I know this works with Paypal but does this work with Merchant Account?

How difficult it is to make it workable with Merchant account? I appreciate your answer.

Thanks.

You edit the web.config file that came with ASPProtect.NET.

You find this tag

  <customErrors mode="RemoteOnly" />

you change it to this

  <customErrors mode="Off" />

If you have a different web.config file in your root I suggest you make sure the tag is set to off there as well for troubleshooting sake

If done correctly you will get a detailed error
It's basic low level ASP.NET stuff really and does not have anything specific to do with ASPProtect.NET.

You also need to make sure your web is set up correctly for ASP.NET and that the correct web.config's are firing..etc etc

thanks for posting this... Since "private" is the default setting from what I read and setting it to "public" cured the issue chances are leaving it at "public" is the way to go.

http://msdn.microsoft.com/library/default.asp?url=/library/e n-us/iissdk/html/33f2780a-eee8-4601-84b7-b489e4c756df.asp

http://www.w3schools.com/asp/prop_cachecontrol.asp

ALSO: since you are one the few people that has ever contributed anything helpful to the forums I am going to reward you with a free copy of the password expiration mod. I am sending you a PM with the download info.

The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.

banner_redirect.asp, line 36

Database - MS SQL Server.

you have to check the session variables for groups a little differently.. info on that is here

http://support.cjwsoft.com/code/moreinfo198-1.htm

Sorry, you cannot, that is how it works and that is how it has to work for reasons I am not going to try to explain as it is pretty technical. (it works the same way even when not using paypal and using email authentication... nearly every registration system out there does it that way under an email authentication scenario or a PayPal IPN thing.)

Basically, if you are concerned about it you need to periodically manually check for accounts that were never activated and delete them. Maybe when I get some time some day I will make a little interface to help find those and clean them up at once.

I am running .asp pages and using the longer code method to display flash banners on my site.

I have noticed a considerable decrease in the loading of my index page when I have a banner called.  When I remove the banner, all is fine.

Any suggestions?

Dave

Hallo,

Can I change the number of the access levels?

I want to have about 20 levels...