OK.. I went with using ASPEMAIL.  The above did not seem to work.  No worries though, where there is a will (with options) there is a way.

It should be released sometime late May 2004 or early June 2004 but no gurantees as I am pretty busy right now with some projects.

There will be upgrade instructions and it should be a fairly easy upgrade.

no, that system only works with ASP.NET code.

Currently it can not possibly work with classic asp.
PayPal made it a nightmare to use and work with.

Special things regarding the signing of digital certificates also need to be installed on the web server so if it isn't your server your also out of luck.

Version 8.1 can work with MySQL
http://www.aspbanner.com/aspbanunlimited_v8.asp
It is just not supported at all.

The standard version can not work with MySQL.
There were a lot of changes to make the new version work with it and I really only did ift because I have a couple friends with busy sites that could only use MySQL.

It sounds like your site is way too busy for using an access database as you mentioned.

Okay thanks, I'll have to consider wether or not to go down the path of the upgrade or cut my losses as the Access cannot handle the pressure

It's just errored out again with the following message:

msxml3.dll error '80072ee2'

The operation timed out

/forum/banner.asp, line 15

Regards,

Dave

(FREE) Nov 23 2005 Update Files

If you purchased ASPProtect Version 7.x before Nov 23 2005 then you can download these Update Files.

(These are non-critical updates.. only update if you want the described changes below)

These updates do the following..

• Make the Tabs in the Admin area move up and down as you navigate around so they look more like tabs used in a file cabinet.
  
• Updates the import/export process so the tab delimited text files created now store the passwords in plain text instead of encrypted. I have been thinking about this one for a while now and I think it is better this way as it was confusing a lot of people. If can also kill the whole process if by chance the encrypted output of a password contains a line break of sorts. There is no way to deal with that scenario so this is way the import/export process is going to work from now on. This also means you should be VERY carfeful about leaving export files lying around as they will have the passwords in them.
  
• Updates the "expected_paths.asp" in the data folder because the paths it was generating had an extra "data/" in it.
  
• Updates the users page so it will not show the import/export link if you have not entered a path for the export files in the settings.
  
• Adds an Activity Tab if using the Activity Tracking features instead of the links it used to put on the users page that most people didn't see.

To install these just copy them in over the old files.

Now of course back up your existing files so can revert back if there is a problem or you do not like the changes. If you made any custom changes to any of your pages use your head and realize that copying these in over your existing files will overide any custom changes you made. (that is your business, I am just warning you)

2005-11-23_163025_ASPProtect_v7_11-23-2005_update.zip

If we wanted to user groups, is the "Access Level" in the User setup the same ID as what the group access would be?  Ex. If John had Access Level 4 and the page specified <% GROUPACCESS = "4" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

I'm asking because there is no Group Access Level in the user setup.  Thanks

As an update to this thread I fixed the "upload_post.asp" page quite some time ago but forgot to post the updated file here.

So here it is.

2005-09-16_165913_upload_post.zip

ASPProtect v7.x has a new feature called groups.

Groups are meant as a replacement for using the access levels as they are much more powerful. Support for pages protected using access levels is left in tact for backward compatiability for a customer that was using them.

A customer recently told me groups could not be used like access levels and that 8 access levels was not enough. This is how I explained that groups can do everything access levels can do.



Groups can honestly do everything access levels can do if you really think about it.
Using groups and protecting pages accordingly you could actually create a system that basically worked identically to the way the access levels works.

For example..

You make 8 groups and assign users to them accordingly

Protection code on page allows access to groups 1-8
The aspprotect system generates this code for you…

<% GROUPACCESS = "1,2,3,4,5,6,7,8" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

In this case a user assigned to any one of those groups would have access..

Protection code on page allows access to groups 2-8
The aspprotect system generates this code for you…

<% GROUPACCESS = "2,3,4,5,6,7,8" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

In this case a user assigned to any group between  2-8 would have access..

Protection code on page allows access to groups 3-8
The aspprotect system generates this code for you…

<% GROUPACCESS = "3,4,5,6,7,8" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

In this case a user assigned to any group between  3-8 would have access..

and so on... I think you should get the picture by now

This is great documentaion for windows script 5.6
in windows chm file format for jscript and vbscript.

We use server side vbscript in all our our ASP 3.0 applications so this info can be a lot of help.

2005-02-18_150921_vbscript_docs.zip

ok, PM me some additional info so I can go look around.

I dont quite understand everything going on.

Let me know what to do exactly to be successful logging in and also...

Let me know what to do exactly to reproduce the issue and I will tell you what I think.

Chris, I'm having problems getting this to work. When I plug in the redirect URL and then try to load the web page, the Flash ad never loads successfully - just its black background in the 468 x 60 space. Here's an example of what I'm seeing:

http://www.innovationtools.com/Articles/ArticleHeadlines.asp

Just keep refreshing the page until the black rectangle appears. And here is the code I've loaded for this flash ad:

<OBJECT classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
 codebase=" http://active.macromedia.com/flash2/cabs/swflash.cab#version =4,0,0,0" ID=banner WIDTH="468" HEIGHT="60">
 <PARAM NAME=movie VALUE=" http://www.innovationtools.com/aspbanner/aspbanner/banner_re direct.asp?Banner_ID=25">
 <PARAM NAME=quality VALUE=high>
 <PARAM NAME=bgcolor VALUE=#000000>
 <embed src=" http://www.innovationtools.com/aspbanner/aspbanner/images/ba nners/mindmatters_innovation3.swf "
quality="high" bgcolor="#3CBDCD" WIDTH="468" HEIGHT="60" TYPE="application/x-shockwave-flash" PLUGINSPAGE=" http://www.macromedia.com/shockwave/download/index.cgi?P1_Pr od_Version=ShockwaveFlash">
</OBJECT>

What am I doing wrong? By the way, I'm using the standard version of ASPBanner. Not sure of the version, but it dates from about 2002.

Sorry, there is no option for that.

I'll take it into consideration, but the way the banner rotation logic works would make adding such an option very complicated.

Just give it  an expiration date way into the future if you do not want an ad to expire anytime soon.

I usually just make all my ads expire in like 2020 or something like that since I don't want them to stop running either on some of my sites.

ASPProtect v7 comes with working example code of protecting an image from being downloaded and also protects the true file location of the image on your server..

This comes with the system as an example folder with some files in it.

Basically we protect the image in 2 ways.

All in all this is should be very effective protection. Yes, there are still ways to get the images like doing screen captures, but this will ensure that people viewing images are logged in to your site. This will in most cases keep them from right clicking and saving the images. This will ensure that people can not tell other people the image's url location and it will ensure other sites can not leach your images and bandwidth.

For the image protection examples to work you may need to edit some values
in the stream_pic.asp file that are valid for your setup.

Look at the source. The values you can edit are commented.

Now, you also need to call a valid "image file name" from the call_pic.asp file which is an example of how you protect a page with javascript and call a streamed image using an image tag.

Lasty, here is a great article I found on image protection and some of the things you can do about it and some of things you cannot.

http://pubs.logicalexpressions.com/Pub0009/LPMArticle.asp?ID =41

I'm having an issue importing. It moves the images from the /import folder and creates the thumbnails with no problem, but the full-size photos all have a size of 0 bytes.

http://www.larrysampas.com/gallery2/default.asp?CatLevel=2&a mp;Cat1_ID=1

so you are using the subscriptions signup directory right ?
"paypal_signup2" ?

1st.. I would check that the xml parser is working.

It is required for making the post back to paypal.
It is installed on windows 2000 and 2003 and XP by default.

http://support.cjwsoft.com/forum/forum_posts.asp?TID=134& ; ; ; ; ; ;PN=1


Then I would check the actual form page to paypal to make sure it is generating a valid IPN url as a hidden form value.  It's the payment page you actually click on that actually takes you to paypal. For the subscription signup system that page is called "paypal1.asp"


You'll want to go through the process starting with the default.asp of the signup folder untill you get to that page. Then you want to look at the html source of that page in Internet Explorer. Your looking for something like this in the source code and you want to make sure it is valid.

<input type="hidden" name="notify_url" value=http://www.mysite.com/aspprotect/paypal_sub_signup/ipn.asp>

It also has to a url on the internet that paypals server can see. It can not be a local url for your machine. Also: If it is not valid we can try hard coding it.


If all of these things are good I'll have to take a look. I have some text file logging I can do when paypal hits your IPN url that can tell us if it is actually hitting that page like it is supposed to. And I can test the system for you by making some 1 cent payments using my own paypal account until we find out what is going wrong.

I'm using version 6 upgrade and recently some of the users complained that their passwords are no longer working. I was able to replicate the problem as I also experienced the same thing with my account.

Once I reset the password thru e-mail (Forgotten your password?), I am able to login but it fails later. This is weird as I have an identical copy of the code running flawlessly  on my test server.

The only change which I made to the original downloadable code is by adding password encryption using Base 64 encryption.

Any ideas what might be the problem

Does emailing work under the simplest scenario ? (directly from the users screen)

Thats the way to test it..

All that error means is whatever reason the settings you have chosen are not working. It could be the server. It could be what you chosen. (and yes I realize your pop info from outlook should probably work with the settings you chose)

Whenever I do installs I often have to try 3-5 different emailing scenarios before I come across one that works.

Each time making some changes and sending out test emails from the users screen until I get somewhere. Often time getting a working example of how your Hosting Company wants you to send email from ASP is the info to get your hands on. (what method and settings)

In this case they may have blocked the usee of a remote server and want you to use some other settings for sending email from asp. A lot of times they put that info in their help system.

If I were you I would start by trying the other two CDOSYS options for starters, and then try the remote server option again but using "localhost" as the server, if none of those work consult your host for example code and settings to send email from asp. If you still have no luck I can help for sure.

Realize too when testing the emails may take a bit to arrive. A delay of sorts. Best to type in a quick note about which method you are trying in the email text. That way when you finally get one delivered you'll know which method worked.

Well I have the web hosting tech looking into the memory issues at this point.  Unfortunately I don't have another machine to be able to run the asp on that would run it correctly so that I can just publish it over.

Thanks for the quick reply!

I was thinking it was an ASP config/install issue.

I usually deal with Linux/PHP, so this is all new to me :)

My Admin user got corupted, and I need to reset the password and user, what is the defualt password for this database, as I do not think I have changes this (hopefully) as of yet.

Regards,

Paul

well, I was curious myself so I just tried it.

Good news is it worked just as I thought.

Only problem is your changing things to allow authentication info to be passed over the net in a url. If you can live with the security implications then it will work. I mean a sniffer could see that and end up knowing the username and password.. not likely but just putting that out there.

Of course now that I think about it unless you are running under SSL (https://) when you log in normally that info is in the post info anyway and possible to get at.. course not right out in the open like when you put it in the url and less likely to be noticed.

As long as your not doing it to access critical areas like the admin pages... and you monitor the log files once in a while it's probably nothing to worry about.

the following error message appears, but only when attempting to log off. all other parts of the program seem to be working.

[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0xa04 Thread 0xa38 DBC 0x21ff024 Jet'.

People who have the option pack have a new feature called groups.

Groups are meant as a replacement for using the access levels as they are much more powerful. Support for pages protected using access levels is left in tact for backward compatiability for a customers older protection code.

A customer recently told me groups could not be used like access levels and that 8 access levels was not enough. This is how I explained that groups can do everything access levels can do.



Groups can honestly do everything access levels can do if you really think about it.
Using groups and protecting pages accordingly you could actually create a system that basically worked identically to the way the access levels works.

For example..

You make 8 groups and assign users to them accordingly

Protection code on page allows access to groups 1-8
The aspprotect system generates this code for you…

<% GROUPACCESS = "1,2,3,4,5,6,7,8" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

In this case a user assigned to any one of those groups would have access..

Protection code on page allows access to groups 2-8
The aspprotect system generates this code for you…

<% GROUPACCESS = "2,3,4,5,6,7,8" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

In this case a user assigned to any group between  2-8 would have access..

Protection code on page allows access to groups 3-8
The aspprotect system generates this code for you…

<% GROUPACCESS = "3,4,5,6,7,8" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

In this case a user assigned to any group between  3-8 would have access..

Hello,

Unfortuantely I can not help you much regarding the javascript because I am a server side code kinda guy. Client side javascript just isn't my thing. That was free javascript code that I used for that function. I really do not know enough about editing client javascript. Sounds like you might though.

Style 1 is really a relic left over from the standard version. I just left it in in case someone wanted to use it. Like I said because it is javascript making it do more than it does is tricky (at least for me)

Now,, for actually getting description code. The thing to do is check out how that all works in the pic_window.asp file which is what style 2 two uses. Bascially descriptions for an particular album get stored in one text file. We read that test file. Put the lines into an array. Then display the info which gets run through a functions to convert some special characters used when saving back to normal.

I tried to look at your site but it woulnt load for some reason.

Your SQL statement to the database is the key.

You want to change the sortby hyperlink on that page so that it will in turn change the dynamic sql statement to sort the way you want

Find

?SORTBY=Date_Created

change it to

?SORTBY=Date_Created+ASC

or maybe

?SORTBY=Date_Created+DESC

One of them is the default anyway, but I cant remember which is which off hand so just try them both till you get the desired result

near the top you can also change the default sortby when thet page is loaded

SORTBY = Request("SORTBY")
If SORTBY = "" Then
 SORTBY = "Name"
End If

there you would use a space though.. not a "+" sign when adding the ASC or DESC

The + sign is only used in the hyperlinks because it means a space for browsers that can't deal with spaces in links