I purchased 6.0 in Feb 05.  Is there an upgrade price to 7.0

I spent considerable time setting up 6.0 to work with my web site. From what I read in the forum, it sounds like I have to start over again to integrate the new version into our web site. I do not relish the thought of that, but I have to move to an email system with a valid MX record.

Will I be starting over from scratch with this upgrade?

edited due to inappropriate content

From: Mo Afifi
Sent: Sunday, October 23, 2005 4:47 PM
To: CJWSoft Support Info
Subject: Re: CJWSoft Support Info : SSL - Verisign Certifcates

Microsoft VBScript compilation error '800a03f9'

Expected 'Then'

/aspprotect/password_admin/upload_post.asp, line 6

If Session("Admin") <> "True"



If I upload the text file by FTP and then try to import it it only tends to import the first two existing rows.

All collumns match but not sure if I need to add "User_ID". I have added it and created consequecutive numbers.

Any assistance would be appreciated.

Thanks

Umm, if your using MSACCESS your using MSACCESS

SQL server has nothing to do with it.

This isn't going to help you much but here is the deal.

The 2checkout support in ASPProtect actually is not supposed to work with 2checkout subscriptions and therefore does not need to use an item number.

It is intended to be used for single payments only with 2checkout as explained in this thread.
http://support.cjwsoft.com/code/moreinfo212-1.htm

Single payments with 2checkout use their shopping cart which allows for dynamic payments without needing an item number.

I agree with you that 2checkout's interface is confusing. It's actually about the worst system I have ever seen. I could not make a 2Checkout subscription system because their system is just too limited and I couldn't make it work the way it really needed to.

Nov 2005

When I designed the system I never really intended people to type in long descriptions for pictures

and if they did I assumed they would use the enter key once in while..

but I guess people dont do that

This thread is along the same lines and shows what someone else did about this..

http://support.cjwsoft.com/code/moreinfo99-1.htm

though they are talking about a different page its the same issue

If a picture does not show after uploading it is one of the following things.

The upload method chosen is not supported on the server
or
The physical path specified to the pictures folder is not correct.
or
The URL to the Pictures folder is not correct.
or
Permissions to the pictures folder have not been set properly


Here is more information on how permissions are set.

http://support.cjwsoft.com/code/moreinfo136-1.htm
http://support.cjwsoft.com/code/moreinfo56-1.htm

Without more information and the settings you have entered and chosen that is all I can offer for now.

You would set the groups during users signup the same way you would do the expiration in the following example.

http://support.cjwsoft.com/code/moreinfo170-1.htm

The groups field need to be set the exact same way it would look like in the database of course

So, if a user was part of groups 1, and 2

You would look in the database and see this in the groups fields for that user

*1*,*2*

so in the signup code you set that like so

CmdAddUser.Fields("Groups") = "*1*,*2*"

This info only applies to resgitrations and signups using the "users" folder.
if you wanted to make different sceanrios you would need to carefully make a copy of the users folder and adjust it accordingly

I do not have any programming knowledge and have what might be a simple question.

I am having a hard time getting my hosting company to modify the rights on the data folder. They state they support ASP and access databases however this is the response I got when I requested the modify permissions set for the internet guest account:

Were the rights changed on the data folder?  No, we do not manage rights to folders.

My question to you is: Doesn't supporting asp require those permissions be set on the database folder or can asp (not just aspprotect) work without those rights modified?

Thanks

one last thing... if you did an upgrade from a previous version and didnt do the whole database field thing right during the upgrade process as stated here you could have trouble.
http://support.cjwsoft.com/code/moreinfo174-1.htm

Meaning you should check your new database with the field structure of an unmodified new database and make sure all field names match up perfectly.. especially paying attention to the username and password fields

One last thing..
If you did an import via text file and didn't import all the fields ASPProtect needs you could possibly have problems as well.. though I don't think this relates to the timeout so it probably is not the case

Hi Chris,

When I run the physical map test this is what I get:

The Physical path to this virtual website is: \\NAWINFS04\home\users\web\b2623\rh.vickery2004

Will that work correctly without a drive letter specified?

Thanks

Rhona

Chris: You are right about a little extra coding to make it work. I am still learning .ASP coding, so I did a little web searching and used IF THEN statments to confirm a member logged in with a valid Access Code. If valid, the protected page executes, with the Member's Name and Access Level on a single line at the top of that page. Looks sharp! If not logged in, or a non member (who found the page via Google), I used a Redirect to send s/he to a login page with optional links as you suggested (http://www.vspa.com/aspprotect/vspa-password-failed.asp) . I couldn't get it to work when using Group Access, but I am sure that is just because I am a novice at .ASP (I will post that example when I figure it out). Meanwhile, here's the code I used that works:

<%@ LANGUAGE="VBSCRIPT" %>
<!--#INCLUDE FILE="dataconn_inc.asp"-->
<!--#INCLUDE FILE="check_user_inc.asp"-->
<!--#INCLUDE FILE="config_inc.asp"-->
<% =Session("First_Name") %>&nbsp;<% =Session("Last_Name") %>:
<%
If Session("Access_Level") = "6"  Then
    Response.Write "VSPA Active Member Access Level 6"
 End If
If Session("Access_Level") = "7" Then
    Response.Write "VSPA Life Member Access Level 7"
 End If
If Session("Access_Level") = "8" Then
    Response.Write "VSPA Officer/Staff Access Level 8"
 End If
If Session("Access_Level") < "6" Then
    Response.Write "Access Level 1-6 NOT AUTHORIZED RESTRICTED AREA ACCESS"
    Response.Redirect("vspa-password-failed.asp")
End If
%><!-- http://www.vspa.com/aspprotect/vspa-password-enter.asp -->
<!-- *** End ASPProtect Code *** -->
<html>
<head>

Thanks for the quick reply!

I was thinking it was an ASP config/install issue.

I usually deal with Linux/PHP, so this is all new to me :)

The "forgot your password" feature is not sending passwords to users when they put in their emails.

Any suggestions?

Thanks

My Admin user got corupted, and I need to reset the password and user, what is the defualt password for this database, as I do not think I have changes this (hopefully) as of yet.

Regards,

Paul

If I also password protect the pricelist pages then someone will have to login twice.

nobody should have to log in twice... ?

session variables keep track of access... once your in - your in and you can browse to and from any password protected pages you like

If it is making you log in each time then cookies are most likely disabled.. session variables requires cookies being on to work.. cookies being on  is a requirement of aspprotect and is how Formed Based Authentication works..

let me know if that is the issue there...

you shouldnt have to be logging in more than once per session

Thats the whole point of the application...

Hi,

I am using the upload_post_VBSCRIPT.asp to upload the pictures. My concern is the security of this. For instance I've seen some sites get hacked by a user uploading a file (going through the same process) and ending up crashing the entire server.

I tried adding .jpeg to the end of a text file (filename.vbs.jpeg) and then uploading it, and the file was actually uploaded. Is this a potential problem?

Thanks

S

Okay Chris, I wold like to get rid of the encryption then if it's not too much trouble.

I have no option of running the production server against an ms access db, since the db needs to be online and accessible from another system.

Of course ASP.NET is and HAS been installed. I have been running asp.net scripts for years on it. I am not new to asp.net nor setting up the server or anything. ASP.NET is properly installed and works perfectly.

You are missing the fact i mentioned it is a DOMAIN CONTROLLER.

I have come across MANY articles ONLINE via GOOGLE that mention if it is a domain controller, for some reason the aspnet account is not there or gets deleted.

IN ITS PLACE GOES THE IIS_WPG ACCOUNT. IS YOUR SOFTWARE NOT COMPATIBLE WITH THIS ACCOUNT?

Is it possible to run ASP.NET scripts without ASP.NET not being installed? Because I have been running asp.net pages without any problem.

yea.. it sounds like aspimage is not working right.

You wont get any errors..

I would suggest using some of aspimage's sample asp pages in your web and see if they do their thing. You need to be sure aspimage is working correctly under the ,ost simple of circumstances

Though ASPImage is the standard in ASP image resizing and has been around forever and it works very well. Their support is almost non-existant.. in 6 years they have never answered any email I have sent them. I have sent them 6 or so over the years and then just stopped trying. I bought a server bundle too way back then for like 300.00 or so when we had a company called gisco. You would think they could answer my emails. I think that guy just made a ton of asp components back in the day and then just took a seriously long vacation. Updated them a few times in between when he felt like it and making good money the whole time.. More power too him I guess. I'd love to be in his shoes when he sells an enterprise license for 3000.00. Maybe he isn't even around anymore and the someone he knows just kept the sales going. Who knows..

Anyway... it does a great job when ya get it working.

Personally this is how I install it and it works every time.
I like to put their dll in the system32 folder.
Register it.
Run their licensing prog to make it a full version if you paid for it yet.
Right click on the dll and give the "everyone" account modify permissions
Right click on the "windows/temp" folder and give it the same permissions

nope ,sql server has nothing to do with this

I am talking about the folder pictures are stored in.. it needs modify permissions set for the internet guest account like those articles talk about

Alternate Method to call banners from non ".asp" pages.

<iframe src ="http://localhost/aspbanner/aspbanner/aspbanner_inc.asp?Ban nerZone=4" width="468" height="60" frameborder="0" marginwidth="0" marginheight="0" scrolling="no"></iframe>

Be sure to delete the space in the BannerZone variable above. I am not sure why it is doing that in this post.

You can try calling the banners in an simple iframe like so.
This method should work much better than the javascript method because users with javascript turned off will still see the banners. You also will not have any of the limitations the javascript method has. Iframe is now supported by most recent browsers so it is now a good solution. Here is a chart that shows which browser versions support iframe.

Be sure however to edit the height and width values accordingly as that is very important.

This is the 1st time anyone has ever told me they had any issues with the import process so I need more detailed information.

What upload component/method are you using ?
Are you using an image resizing component ?
Have permissions been set on the import folder ?

And lastly..
Can I see this happening ?

If not please put it on a live server where I can troubleshoot it for you.
Like we say on our site.

In some cases in order to receive proper tech support your application will be need to be installed on a live server on the Internet. We simply cannot troubleshoot all issues when the application is only installed on your local machine. We also may require access to your server in order to troubleshoot any issues.