Christopher

Many Thanks

Seems like its working just got to test it bit to see, though it wasnt going to work as I had one too many End If's after the last part of the code you done for me. But even I eventually sussed it, nothing to do with your bit just another mistake on my part

Great to get support like this especially on a Saturday

regards

John

Ohhh...

I was thinking it worked like this; A user goes to that page and logs in.. and from there they can then browse the site and do what they want..

So in order for it to work i need to edit a page say... members.aspx (i assume it needs to be an asp.net page) and in the header put that protect code and when a user accesses it, it will prompt them for their un and pw and then if correct will allow them to view the page... and likewise if they are still logged in will be able to use the page?

If that is how to works as i mentioned above thats great...

I understand the redirect principle...but say i have a log in box on the main page... you know like most pages have a user log in on the left hand side... i wanted to do that. But i cant obviously protect the main home page or else normal users will not be able to view it without logging in or registering

you password protect an asp page in your site "where that is is up to you"

http://support.cjwsoft.com/code/moreinfo171-1.htm

then you link them there from your own pages

thats all there is to it

is that what you are asking?

Additionally...any page you password protect automatically becomes a login page... where you want to start and where you send them after or before login is something you have to handle on your own

Any pages you pasword protect will prompt the user for login info if they are not yet logged in that is.

Then once logged in it returns them to the same page they are showing the page content as it would normally appear.

I have been working on this all night long. I have been reading every possible article. I have created an ODBC connection on the server.. which i have never done before? Still nothing. I looked at the machine.config file... i read about impersonating whatever the hell that is... I am really stressed out. I have the 1.1 framework installed.

I read about dsn and dsn-less connections. Is there another way i can connect to the database? Without using a username and pw maybe?

it is not uncommon for folder permissions to be lost or changed on a server.. a lot of things can cause it

if it was working and now you can not edit or write new data to the database it is most likely permissions

I would triple check permissions... see my articles if there is any doubt on how permissions are set

http://support.cjwsoft.com/code/moreinfo136-1.htm

http://support.cjwsoft.com/code/moreinfo56-1.htm

How do I recover or reset admin password used for the aspprotected pages. I have installed it months and months ago, but now can not recall the password. Any help appreciated, as I do not feel like installing it again.

I got ya. Well hey, that's what's great about the iframe right?

Now, we can connect to the MySQL database with ASPBanner using the following connection string if we like.

"driver={MySQL ODBC 3.51 Driver};server=localhost;port=3306;uid=root;pwd=temp;databas e=aspbanner;option=16386"

But we really do not want to connect to the aspbanner MySQL database using the "root" account

So, lets make an account to use..

In MySQL Administrator select "User Administration"

Down below you will see the user "root"

Right click on "root" and select "Add new user"



Type in a New MySQL Username and Password

I am going to call my new user "aspbanneruser"

Hit the Schema Privileges" tab



In this case since I am using the root account to manage my MySQL system I am just going to give this new user account what it needs to use the aspbanner database.. you may want to apply more permissions to the new account, that is up to you.. I am giving the new user (select, insert, update, delete, execute) So I right click on the aspbanner and then bring over the permissions I need for it.. and hit apply changes down in the bottom right.

We can now connect to the aspbanner MySQL database using this new account like so.

"driver={MySQL ODBC 3.51 Driver};server=localhost;port=3306;uid=aspbanneruser;pwd=tem p;databas e=aspbanner;option=16386"

------------------------------------------------------------ -----
article still in the process of being written (3/14/06)

Line 409:
Line 410:
Line 411:		<authentication mode="Forms">
Line 412:			
Line 413:			<!-- DO NOT CHANGE UNLESS INSTRUCTED TO DO SO -->

Chris,

2Checkout.com has added to their required cart parameters:

https://www.2checkout.com/documentation/newparameters.html

Do you have a version of 2checkout2.asp that will support these?

Thanks,

Nick

OK.. I went with using ASPEMAIL.  The above did not seem to work.  No worries though, where there is a will (with options) there is a way.

ERROR [HY000] [Microsoft][ODBC Microsoft Access Driver] Operation must use an updateable query.

Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Exception Details: Microsoft.Data.Odbc.OdbcException: ERROR [HY000] [Microsoft][ODBC Microsoft Access Driver] Operation must use an updateable query.

Source Error:

An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.

Stack Trace:

[OdbcException: ERROR [HY000] [Microsoft][ODBC Microsoft Access Driver] Operation must use an updateable query.] Microsoft.Data.Odbc.OdbcConnection.HandleError(IntPtr hHandle, SQL_HANDLE hType, RETCODE retcode) +27 Microsoft.Data.Odbc.OdbcCommand.ExecuteReaderObject(CommandB ehavior behavior, String method) +838 Microsoft.Data.Odbc.OdbcCommand.ExecuteNonQuery() +80 aspprotectnet.aspprotectlogin.Login_Click(Object sender, EventArgs e) +2284 System.Web.UI.WebControls.Button.OnClick(EventArgs e) +108 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEven tHandler.RaisePostBackEvent(String eventArgument) +57 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +18 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33 System.Web.UI.Page.ProcessRequestMain() +1292

Version Information: Microsoft .NET Framework Version:1.1.4322.2300; ASP.NET Version:1.1.4322.2300

I am getting this error message when trying to log in as admin or registering a new user. I am using Windows Server 2003 and it is a DOMAIN CONTROLLER.

I have read that there is NO ASPNET account for a domain controller. In its place is the IIS_WPG account. I have given this account and the IUSR account FULL CONTROL.

STILL GETTING AN ERROR. ANY SUGGESTIONS???

1st: try it with a normal dsn-less connection like we show in the example.. dont use that OLEDB.4.0 connection string.. connecting like that can cause a lot of problems and is not as great as everyone thinks it is and it can sometimes be difficult to get it working when the database has a password set on it

For the sake of troubleshooting just connect like so: (fixing the path of course)

ConnectionString = "DBQ=C:\Inetpub\wwwroot\aspprotect\data\database\ASPProtect_ access2002.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp"

ASPProtect will generate the actual connection string you should use when you run this page

http://www.mysite.com/data/setup_info.asp

Replacing the part in blue with your website info.


2nd: any IIS server setup to have the access database over the network path like that has a poor setup... and that can cause all sorts of problems as well, access is not designed to run over the network like that.. for more on that read this thread -  Start 5 posts down
http://support.cjwsoft.com/code/code_info.asp?TID=479&KW =OLEDB%2E4%2E0

3rd: If the app does not run using the connection string like I say to use then the problem is 100% on their end and is either related to permissions or the fact they are keeping the access database on a network path which is BAD BAD BAD... no quality host that knew what they are doing would set it up that way.. ultimately you don't want to host asp with a place that has a setup like that

4th: If you want to try some other stuff out we have a free guestbook, asptest, and a free version of aspbanner you can try out as well... www.cjwsoft.com

5th: If you need a quality asp host that knows what they are doing and offers great asp support www.alentus.com is the place

6th: Your right, it is not the code, its the data connection

how you connecting... lets see the connection string...

could be permissions related too.. if they are not set correctly
(always give them to the folder, never just the mdb file)

Some of this might help...

http://support.cjwsoft.com/code/moreinfo11-1.htm

http://support.cjwsoft.com/code/moreinfo136-1.htm

http://support.cjwsoft.com/code/moreinfo56-1.htm

you may want to download some of the different versions of the access database from the support area and try connecting to them as you may have older odbc drivers on the server

You may also want to try to get ASPTest from our website working before you go any further

Same here.  Thinking it might be server load or the bandwidth to the server.

Thanks for checking!
Lance

Here is what I have in settings.

ServerSoftware	Microsoft-IIS/6.0
ServerName	www.107threnegades.com
ServerProtocol	HTTP/1.1
PathInfo	/gallery/gallery_admin
PathTranslated	d:\hosting\arisky1\gallery\gallery_admin
FILE SYSTEM OBJECT	Installed
ADODB (ActiveX Data Object)	Version: 1.2 Installed
CDONTS	Version: 2.80 Installed
SMTPMail	Not Installed
JMail	Not Installed
AspEmail	Not Installed
AspMail	Not Installed
SAFILEUP	Not Installed
Dundas Upload	Not Installed
ASPImage	Not Installed
AspJpeg	Version: 1.4.0.1 Installed
ImgWriter	Not Installed
Script Engine
Type	VBScript
Version	5.6
Build	8515

I do not even see ASPUpload listed but when I run the test_asp_components.asp from the extras/more_component_info folder, it shows that it is installed.

67	Upload	Installed	COM Details	Persits - ASPUpload
68	Image	Installed	COM Details	Persits - AspJpeg

Upgrade from V6 to v7.x with an MSACCESS DATABASE

1st of all, backup your existing ASPProtect files and database before performing this upgrade. Please be really careful while performing this upgrade. Version 7.x  is a highly advanced application compared to any previous versions. CJWSoft under no circumstances is responsible if you lose information or have website downtime.

BOTTOM LINE: (PERFORM THIS UPGRADE AT YOUR OWN RISK)

To do this upgrade you're going to need to have the Microsoft Access Application.
To work with an Access .mdb file it can not be newer than the version of Microsoft Access you are running.

That being said, on with the upgrade..

Open you're existing Acccess Database up in Microsoft Access..
You should see this something like this.



By right clicking on then choosing rename
Rename "Users" to "ASPP_Users"
Rename "Groups" to "ASPP_Groups"

If you do not have a "Groups" table do not worry about it right now.

Now right click and DELETE the Config Table.
Yes, delete it..

You should now see this. (with or without the "Groups" table)



Now, right click on "ASPP_Users" and go into design view.
It should look like this.


Rename the "Password" field to "Old_Password"
Be sure to spell it perfectly using the Underscore
It will look like this.


Now scroll down to the bottom a bit It should look like this.



Now..

If you have a "Groups" Field... leave it alone
If you do not have a "Groups" Field add one and make it a memo field.

Now, we are going to add a few more new fields.

Add a field called "Redirection_URL" make it a "text" field with 150 field size
Add a field called "PayPal_Subscriber_ID" make it a "text" field with 100 field size
Add a field called "Newsletter" and make it a yes/no field
Add a field called "Password" and make it a "text" field with 100 field size

It should now look like this.
(you do not need to worry about the field descriptions.. that part is optional and only seen when working on the database)



Now close that window and save the changes..

Your now going to open up another Access Database while still leaving the one you have on your screen open. You going to open up one of the new databases that came with v7.x. This database has some info we are simply going to copy and paste.

You'll want to open it and put it side by side on your desktop like so.
(the old database is on the left.. the new one is on the right)



Now, for the fun part.

On the new database to the right.. right click on the "ASPP_Config" table and pick "Copy"

Then move your mouse over to the old database on the left. Right click in the open white area and click "paste"

It will ask you for a database name. Type in "ASPP_Config"
Leave "Structure and Data" checked and hit OK

Your old database on the left should now have a nice new "ASPP_Config" table.

OK, now for the "ASPP_Groups" table

If you already have a "ASPP_Groups" table in your old database you are done.

If you do not have one your going to copy and paste the table from the New Database to your old database just like we just did with the "ASPP_config" table.

Your old database should now look like this.



Now, you are done upgrading your database from within Microsoft Access.

The existing passwords still have to be encrytped and moved from the "Old_Password" to the "Password" field

To that we have a special page we run in the application that will take care of that.

So, for now... go install the application, but using the database we just created.
Follow these instructions for the most part...
http://support.cjwsoft.com/forum/forum_posts.asp?TID=181& ; ;PN=1

When you get to the part where you finally get into the admin area and need to make an admin account you will notice that your existing user database is there but none of the users have passwords if you look at them in the edit screen.

That is normal. Simply do what the instructions say and create and admin account using a username that does not exist..

Then log off... then back in as that new admin account. If that works you are ready to convert the passwords.

This part is very easy.

You want to run a special page via the browser.

http://www.mysite.com/password_admin/convert_to_encrypted.asp

Replacing the part in blue with your website info.

Once you get the page running you will see a login prompt and one form field just like before with the "get_me_in.asp" page

You will need to paste the "PasswordEncryptionKey" value that you used in the "config_inc.asp" file in the form field and hit enter.

If all goes well you will see a page telling you to click here to encrypt the passwords and copy them over.

So do what it says... dont click more than once and wait.

Eventually it should say it is finished. So go log in to the admin area of the system using the new admin account.

Now edit some users but dont save... you want to see if the passwords are showing up. If they are the conversion worked. If you see nothing or a garbled mess it did not work and you made a mistake during this whole process.

If things went well backup and delete the conversion file below.

http://www.mysite.com/password_admin/convert_to_encrypted.asp

You do not need it anymore.

Once you are positive every thing is running smoothly and everyone's passwords are ok you can go in and delete the "Old_Password" field as well.



If things didnt go well.. try again from scratch and go slowly.
If they still dont go well get ahold of us for help.

We are here to help, but if you really want us to we can be hired to do the conversion.

Just wanted to let you know that after modifying the remote host string in the email pages and getting the correct connection from my server, everything is running fine.

I hope you enjoyed your vacation.

thank you
adam

OK, I just spent like an hour in your site.. I almost gave up

1st off... I don't know what FTP Program/Settings or what OS you are using but all the ASP Protect Files had been reformatted in a odd way which was causing some issues and the database also had problems. Your somehow introducing all sorts of UNIX line breaks to all the files and the database was actually missing some crucial parts of itself and was corrupted. So I had to update everything which means a new database. I have never seen anything like it but I fixed it all. Its something you are doing but I do not know what. Maybe your unzipping method again ?


So to get back into the admin area...

admin
test

Now, the reason  the albums were not showing is because you are using the ole connection string which causes problems like that. However because you host has like the worst setup ever with that network path crap for the site that was the only connection string that would work for some reason.

I highly suggest a new host with a proper setup for running ASP. www.alentus.com
Your hosting companies setup is horrid as far as I am concerned.
Access Databases are not meant to be connected to via a network path.
http://www.aspfaq.com/show.asp?id=2168

Anyway, I rewrote some of the code because of the ole connection and got the albums showing up for you.. who knows what other problems that OLE connection may bring up in the future.. for now things I tested seem ok.

As for your broken image in the your header/footer...  You cant link to images and links using virtual pathing in those includes because the files are called from different directories and will work in some and not others

so when your in the root you see the image, when in a different folder you see a broken image

In other words.

link to

http://www.vickerylightning.com/gallery/vickery_template5_r2 _c1.jpg

not just

vickery_template5_r2_c1.jpg

The same goes for hyperlinks.. use the full url paths


Whatever you do...Back up the gallery folder with my changes before you go doing anything.

Is there any way to extend the limit multiple login feature to a certain number instead all or none?  In other words, i need to have a user be able to use the same login for x number of people.  My customers are institutions and want to be able to have a single login for however many users they purchase for.

I post new ads ,  can view it in  admin area 

but  when  go to first page  no ads show  

all categories show   (0)  

How solve this problem ?

PS: I set default auto approved ads

Running in parallel for testing is actually a smart way to do it, but the truth is you don't use anything from version 6 except the upgraded database (we have a tutorial on how to upgrade the database)

Version 7 was a drastic change /rewrite to all of the asp files that come with the application. So you will be starting out with fresh version 7 ".asp" files and folders... You will also find that once you get version 7 running that editing certain things like the look of the users area and the login screens is much easier to do.

That being said any of your own ".asp" pages that you protect use the same protection code they always did, so there will be no drastic changes needed there when you do finalize the upgrade.



If using MSACCESS as the database I suggest installing the application somewhere in your web and using a fresh ASPProtect 7 database. Once you are familiar with the setup and everything is working fine. Attempt the database conversion and when your done stick your converted database in there and see if everything is ok.

Also, if you already purchased the application download the latest version before doing the install. It's the same download URL. If you don't have it email me and I can hook you up. I have added some new features and fixed a couple minor things since it's release.

So far the feedback on version 7 has been awesome..

What other information do you have ?

Details are very important.

Info on situations where it works... like OS, browser version.. etc etc

Info on situations where it does not work... same stuff

size of the PDF files ?

server info ?

Maybe protect a page and offer a PDF file so myself and some of the forum users can try it and report back what happens.

Also, Many people zip up PDF files when letting people download them as browsers can act pretty odd at times with them. Perhaps that is an option.

False alarm. Dumb user alert (both the classifieds customer and me).

When I test fixes, I need to be looking at the right Ad_ID to get correct results

upgrade pricing is here
http://www.aspbanner.com/purchase_unlimited_v8.1_classic_upg rade.asp

what is different
http://www.aspbanner.com/v8_notes.asp

the changes to make it work with MySQL were vast to say the least
more on that from an old thread
http://support.cjwsoft.com/code/code_info.asp?TID=37&PN= 1&TPN=1

just please remember use of MySQL is just not supported
http://www.aspbanner.com/mysql.htm

I can assure you it works well as I have people using it

Hello,

In that version is is not easy to change the values as they were not intended to be edited. You would have to dig through quite a lot of code as those values are hardcoded in quite a few pages. Probably at least 10 or more.

In the pro version there are variables you can change that very easily as that is intended to be easily changed in that version.

I downloaded v7 3/7/2005

I entered a password that was supposed to be all caps with only first letter caps. 

it is odd, if I go to other user and enter wrong password that does not come up.  it apprpriately goes to a screen that says Access Denied.

thx