the reason being is because when I do installs I do not touch any of your existing content. I only install the base application and make sure everything in it working correctly and also that the example protected pages are working. I do not integrate it with your existing site or edit any of your existing web content. That is up to you

sorry about that, but it would be way too time consuming and editing people's existing pages is a good way to cause a lot of headaches for me and the customer if something goes wrong. Not only that but everyone uses the system differently and it wouldnt make sense for me to be the one doing that based on access levels, groups.. etc etc  which will all be custom to how you want things set up.

more on installation policies here.
http://www.cjwsoft.com/installation_service.asp

My hosting company uses ASPEMAIL - and I am trying to setup the mailing settings on ASPPROTECT - but cant seem to get it to work.   I've tried many different options - here are two that are the closest - but have issues:

1. If I use the settings:

email component: aspemail

Mail remote server: my internal server name

*no smtp authentication

email mail notification - my email address on my internal server

***I get the following results:

       I can get get notified when a new user logs in, email a user from aspprotect user screen if they are in my company and have a valid email -- but I can not send to the outside world - I get an relay prohibited error.

2. If i try to change the setting to use the Hosting Website email server - I get the following results:  I dont get notified when a new user registers, I cant send to internal company people - but I can send to the outside world.

**any suggestions on what to do? I'm trying to work with the people who manage the mail servers - but since I dont know anything about them - its a bit difficult.

[/QUOTE]

The relay error is because when you send emails outside your email domain smtp authentication is required.

I suggest trying to use CDOSYS with the smtp authentication option. CDOSYS is on all servers by default and is really the way to go. Use a real email account and password to send the emails through the server.  Be sure to check smtp authentication for cdosys and to specify all that info for your email account and password in the settings screen.

If you want to know about CDOSYS read my article.
http://www.powerasp.com/content/new/sending_email_cdosys.asp

Microsoft VBScript compilation error '800a0400'

Expected statement

D:\CLIENTS\RKLARMAN\DRSWEISBERG\PASSWORD_ADMIN\../dataconn_i nc.asp, line 18

<%
^

Hallo,

Can I change the number of the access levels?

I want to have about 20 levels...

Humm, Did you make any changes to the code ?
Solid Black is not the default so it must have changed at least once.

Otherwise it might be some sort of application variable problem.
I would make sure the web is and "application" in the IIS console.

Probably not... javascript calling complex javascript is not a good thing and is often a problem.

I would try one of the other methods such as the xml parser if possible.

you actually dont touch any of those
UploadDirectory = CmdGetConfiguration("UploadDirectory")
They get set from the config table in the database which gets edited in the admin area.

so...

I am talking about the settings area in the admin area of the applicaton.
Every setting there is descibed in detail. You get there and change serttings there via the web browser and by logging in as the admin.

Log in to the online demo as admin and check out the settings area if you are confused.
http://www.aspphotogallery.com/demo_pro.asp

Sorry about earlier post in wrong area-

I have followed instructions to set up access levels (adding the

<% CHECKFOR = "4" %>    for user level 4 for instance.) The database is connecting properly and the basic check for login is taking place, but it seems that all users have access to all levels no matter what is on the database; i.e I set up a test page with "checkfor=4" and all users have access to it, even those with lower leve access.

Any ideas?

Thanks

Hi,

First and foremost, a great product. I downloaded it last night and it took little effort to get it up and running

.....now a little question...

Has the software/code been tried out on a Mysql db and if so did it work?

The reason I ask is that my website is very busy (1.5million page views per month avg) and I'm considering converting the ASPBanner Access db to a Mysql one to help handle the traffic. For every page view one banner impression is being made which means that the Access db is under a bit of pressure

This afternoon there were 1012 simultanious users on the website and it froze with an error message displaying where the banner should have been (I didn't quite catch the message but something to do with the banner script timing out). I'm not sure if the Access db had something to do with it but it seemed too coincidental. Rebooting the server cured the problem but obviously kicked off the visistors as well
At present there's 668 online and no problems so I'll have to monitor it to see how it goes but if anyone can answer the Mysql question I'd be grateful

Thanks,

Dave

User Registration

The "users" folder allows users to sign themselves up and edit there accounts as well as retrieve lost passwords..

In the settings tab of the ASPProtect admin area there are options for which fields are used and which are mandatory when a user signs up. The only validation the system performs by default is checking for mandatory status. If you want to add more validation so reduce the chances of input errors that is up to you.

You can add additional server side validation by doing server side checks on the save pages... you can also make the field sizes larger in the database if you think you need to. You'll need to be good with ASP to do this.

Always backup your files before making changes to them so that you can revert back to a working copy if you mess something up.

Anyway,

How busy your site is actually won't be the only factor. Really the application should not restart unless something happens. If the IIS application is reseting alot it could very well be the ISP restarting the server or doing IISRESETS as well or other sites on the server causing the application pools to restart.. etc etc etc  Quality ASP hosting is important. Regardless your hosting company most likely will not admit to anything be out of the ordinary.

As far as that directory deleting itself on you.. I doubt they will have an answer for that one. All I can tell for sure is I didn't put any code to delete it in there.

Parent paths being enabled on the server is a requirement of the application. That error means just what it says.

you can change all the server side includes to virtual includes that will work or you can ask you host to enable parent paths.. those are the options

more here...
http://support.cjwsoft.com/code/moreinfo5-1.htm

I have been using this solution for over a year now and think its great, however I recently logged on to add a banner and when I clciked on the link that opens a window, displaying all the gifs in the directory../images/banners/, now images showed up, however they do exist in that directory.

I recently upgraded my computer and am now using windows XP...could that be the problem?

Thanks

grrrrrr

As far as the users thing... my fault that was setup wrong in the settings of the admin login page.

but still dont have a solution for what im trying to do

Permissions and Folder Locations

By default and to keep things clean we store everything in folder called "data"

That folder then has it in 4 sub folders

database (where the .mdb and temporary .ldb files are handled)
export (where the aspprotect export files are saved)
logfiles (where the aspprotect logfiles are saved)
user_pics (where the user pictures are saved)

Doing it this way makes it very easy for a system administrator to right click on one folder and set permissions for that folder and all of it's child folders.

Now, that being said.. you do not have to use these folders.

For example if you already have a folder in your web with modify permissions for the anonymous webserver account then you can use that one folder to store all of the 4 things above.

You'd simply edit your data connection string to point to that folder and then edit the other paths in the settings area of ASPProtect.

We did it that way so you would have options in case your hosting company was being difficult with your ASP hosting needs.

Parent Paths ?

http://support.cjwsoft.com/forum/forum_posts.asp?TID=5&P N=1

Well Chris:

I logged off too soon after your last response. Your last idea was the answer. I am running McAfee as my virus-scanner on the mail server I am running. There was a script inhibitor enabled as a worm detection function. When I disabled it, your software responded correctly. I guess I can do without that, although with everything thrown at the net these days, it makes me a little nervous.

Thanks

If you bought ASPBanner Unlimited Version 7.3 Before August/10/2004 this file needs to be updated.

It fixes a bug where the JavaScript method is not properlly closing an html Image tag. It can cause other hyperlinks on your web page to link to the same place the banner links to. This does not always happen but this fix is the way the code should be so it is best to update it.

Copy this file into your ASPBanner folder over the existing file of the same name.

2004-08-10_125304_injectbanner.zip

ok, 1st we need to rule out the #1 reason people sometimes think that is not working.

Is is set up never to allow the same IP to increment the count more than once in a row so when testing it is real easy to think the count isn't working because unless you can change your ip you can not increment the count more than once per album

It's a poor mans spam abuse type of deal..
For the most part it will keep some Joker from hitting refresh 100 times and inflating the count of an album.

Do you think that is possible what is happening ?

Also, here is an older thread about the same issue?
http://support.cjwsoft.com/code/moreinfo54-2.htm

how about translating the error to english..

Looks to me off hand that it would have something to do with the SQL server itself not being run in an english lcid/format and causing some sort of date issue.

I would also suggest you start off with a brand new blank SQL ASPBanner database and make sure that works before you attemp t to import any data into it.

OK, I just spent like an hour in your site.. I almost gave up

1st off... I don't know what FTP Program/Settings or what OS you are using but all the ASP Protect Files had been reformatted in a odd way which was causing some issues and the database also had problems. Your somehow introducing all sorts of UNIX line breaks to all the files and the database was actually missing some crucial parts of itself and was corrupted. So I had to update everything which means a new database. I have never seen anything like it but I fixed it all. Its something you are doing but I do not know what. Maybe your unzipping method again ?


So to get back into the admin area...

admin
test

Now, the reason  the albums were not showing is because you are using the ole connection string which causes problems like that. However because you host has like the worst setup ever with that network path crap for the site that was the only connection string that would work for some reason.

I highly suggest a new host with a proper setup for running ASP. www.alentus.com
Your hosting companies setup is horrid as far as I am concerned.
Access Databases are not meant to be connected to via a network path.
http://www.aspfaq.com/show.asp?id=2168

Anyway, I rewrote some of the code because of the ole connection and got the albums showing up for you.. who knows what other problems that OLE connection may bring up in the future.. for now things I tested seem ok.

As for your broken image in the your header/footer...  You cant link to images and links using virtual pathing in those includes because the files are called from different directories and will work in some and not others

so when your in the root you see the image, when in a different folder you see a broken image

In other words.

link to

http://www.vickerylightning.com/gallery/vickery_template5_r2 _c1.jpg

not just

vickery_template5_r2_c1.jpg

The same goes for hyperlinks.. use the full url paths


Whatever you do...Back up the gallery folder with my changes before you go doing anything.

That’s about all I can tell you. It's just not something I support.

How do I recover or reset admin password used for the aspprotected pages. I have installed it months and months ago, but now can not recall the password. Any help appreciated, as I do not feel like installing it again.

Hi Chris,

When I run the physical map test this is what I get:

The Physical path to this virtual website is: \\NAWINFS04\home\users\web\b2623\rh.vickery2004

Will that work correctly without a drive letter specified?

Thanks

Rhona

Chris, I'm having problems getting this to work. When I plug in the redirect URL and then try to load the web page, the Flash ad never loads successfully - just its black background in the 468 x 60 space. Here's an example of what I'm seeing:

http://www.innovationtools.com/Articles/ArticleHeadlines.asp

Just keep refreshing the page until the black rectangle appears. And here is the code I've loaded for this flash ad:

<OBJECT classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
 codebase=" http://active.macromedia.com/flash2/cabs/swflash.cab#version =4,0,0,0" ID=banner WIDTH="468" HEIGHT="60">
 <PARAM NAME=movie VALUE=" http://www.innovationtools.com/aspbanner/aspbanner/banner_re direct.asp?Banner_ID=25">
 <PARAM NAME=quality VALUE=high>
 <PARAM NAME=bgcolor VALUE=#000000>
 <embed src=" http://www.innovationtools.com/aspbanner/aspbanner/images/ba nners/mindmatters_innovation3.swf "
quality="high" bgcolor="#3CBDCD" WIDTH="468" HEIGHT="60" TYPE="application/x-shockwave-flash" PLUGINSPAGE=" http://www.macromedia.com/shockwave/download/index.cgi?P1_Pr od_Version=ShockwaveFlash">
</OBJECT>

What am I doing wrong? By the way, I'm using the standard version of ASPBanner. Not sure of the version, but it dates from about 2002.

I think I've found the problem..

The password "abcdefgh" works

The password "abcdefghi" does not

(username "ace45")

Passwords can obviously only contain up to and including 8 characters... By some coincidence I only used short passwords with MS Access.

well, I need more details..

you got SQL server or data connection issues is pretty much the bottom line

If I remember right we went down this road with a SQL setup quite a while back (auguest 2005) and that never really got resolved

here it is
http://support.cjwsoft.com/code/code_info.asp?TID=321&KW =yiak

Need to clarify something..

Your talking about the page where a new user registers right ?
Your not talking about adding a new user from the admin area ?

Either way under no circumstances do I see anything like you are saying happening nor has any other ASPProtect user ever mentioned this probem.

I am going to need to see your site and see this happening. It just makes no sense the way you are describing it.

Also. did you edit the registration page code in any way. If so please revert back to an original copy to ensure this is not some sort of problem introduced by editing the code.

Christopher

I have gone back to your original files and uploaded them to another server folder and instead of using a DSN I have tried this with a DSN less connection and changed the database to MS Access 2002.

This has corrected the problem.
I will check this out again using the DSN with access 2002 to see if this was the problem. It may be something to do with an older format of database on this particular server.

I will let you know what I find.

Thanks for your  quick reply.