I did all that you sugessted and all failed, you  said "I did a sign up.. your verify URL is not saved/set in the application variables. is this somthing I can change manually?  below are the steps I performed......

1 - made sure the web is it's own application in IIS

2 - Reset IIS in command promt

3 - Restarted the server, the only thing is I have not waited perhaps long enough for it to kick in. but it should have with the restart.

I am running windows 2003 on the front end with wondows 2003 and Exchange 2003 on the back end, is there anything else that may be causing this issure?

Thank you!

Matt...

ERROR [HY000] [Microsoft][ODBC Microsoft Access Driver] Operation must use an updateable query.

Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Exception Details: Microsoft.Data.Odbc.OdbcException: ERROR [HY000] [Microsoft][ODBC Microsoft Access Driver] Operation must use an updateable query.

Source Error:

An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.

Stack Trace:

[OdbcException: ERROR [HY000] [Microsoft][ODBC Microsoft Access Driver] Operation must use an updateable query.] Microsoft.Data.Odbc.OdbcConnection.HandleError(IntPtr hHandle, SQL_HANDLE hType, RETCODE retcode) +27 Microsoft.Data.Odbc.OdbcCommand.ExecuteReaderObject(CommandB ehavior behavior, String method) +838 Microsoft.Data.Odbc.OdbcCommand.ExecuteNonQuery() +80 aspprotectnet.aspprotectlogin.Login_Click(Object sender, EventArgs e) +2284 System.Web.UI.WebControls.Button.OnClick(EventArgs e) +108 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEven tHandler.RaisePostBackEvent(String eventArgument) +57 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +18 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33 System.Web.UI.Page.ProcessRequestMain() +1292

Version Information: Microsoft .NET Framework Version:1.1.4322.2300; ASP.NET Version:1.1.4322.2300

I am getting this error message when trying to log in as admin or registering a new user. I am using Windows Server 2003 and it is a DOMAIN CONTROLLER.

I have read that there is NO ASPNET account for a domain controller. In its place is the IIS_WPG account. I have given this account and the IUSR account FULL CONTROL.

STILL GETTING AN ERROR. ANY SUGGESTIONS???

you password protect an asp page in your site "where that is is up to you"

http://support.cjwsoft.com/code/moreinfo171-1.htm

then you link them there from your own pages

thats all there is to it

is that what you are asking?

Additionally...any page you password protect automatically becomes a login page... where you want to start and where you send them after or before login is something you have to handle on your own

Any pages you pasword protect will prompt the user for login info if they are not yet logged in that is.

Then once logged in it returns them to the same page they are showing the page content as it would normally appear.

IT worked just as cwilliams said. I did see the IP address being stored in the table but it didn't dawn on me that it was tied in to the view count, I tried it from a different IP address and it worked great .

Good coding Christopher

Thanks

John

You can't do that. ASPProtect 7 does not work with ASP.NET.

It is a classic ASP application. As the web site states it can only be used to protect ".asp" pages written using vbscript.

ASP and ASP.net are completely different animals.

Thats why we have a .NET version.
http://www.aspprotect.com/more_info_net.asp

I'll try to help when I get back tues night,, see the contact page for info on where I am .
http://www.cjwsoft.com/contact/default.asp?Subject=CJWSoft+G eneral+Inquiry

ok.. the count your talking about wont increment until someone other than you views the page.

After that you can increment it one time...

It keeps track of the last IP that hit it.. if it is the same it doesn't increment

This is all by design...  so the same person doesn't increment the count over and over..

It's simplitist and it can be tricked... but it does what it needs to do 

How do I recover or reset admin password used for the aspprotected pages. I have installed it months and months ago, but now can not recall the password. Any help appreciated, as I do not feel like installing it again.

Which page should a user see next after completing a Paypal transaction?  Where do I set that?

Nick

Help!.. I need to export the username and password fields to a mail merged letter so everyone knows their username and passwords. However whenever i access the database or do an export. The passwords showup as encrypted. Is there a way to access the list, un encrypted?

thanks

I had never noticed this before, but a customer sent me email to say that they had set up their aspclassifieds profile such  that they be contacted by email and not by phone.

However, in their ad, their phone number still appears. The lines in view_ad.asp that check for True values for the Contact_Via_Email and Contact_Via_Phone before displaying that information seem to always evaluate to True, regardless of their setting in the database.

I'm using an Access2000 DB for this. When I open the DB in access, I see the checkboxes correctly unchecked for phone and checked for email. However, if I do a quick test to display the retrieved values in the view_ad.asp (<%=contact_via_phone%> <%=contact_via_email%> they both display True.

What gives? I have had nightmares with Access and its weird handling of true/false 0/1 yes/no fields, but this is driving me nuts.

ok, well as far as what else to try I already told you..

you need to manually compare all those field settings with the sql script and make sure they all got set correctly...

you also need to tell me what email/name you ordered the application under... before I will continue this support with you.. at this point I don't know if you purchased the application or if you are using the unsupported lite version

I purchased 6.0 in Feb 05.  Is there an upgrade price to 7.0

I spent considerable time setting up 6.0 to work with my web site. From what I read in the forum, it sounds like I have to start over again to integrate the new version into our web site. I do not relish the thought of that, but I have to move to an email system with a valid MX record.

Will I be starting over from scratch with this upgrade?

Excellent

maybe this is the issue...

do you realize that the descriptive name you give a group is not always going to be the same ID in the database ? The two are not related.

Perhaps what you named Group 1 is really group ID 3

You can tell for sure by generating protection code for group 1 and see what ID it tells you to use..



You also need to remember that you are testing this with different users and it is really easy to get confused so you need specifically log off using the log off page to ensure session info from the previous login doesn't show up and cause confusion when you log in with a different user... etc etc

in addition to logging off that way you may also want clear the session and application info via the code at the bottom of my article
http://www.powerasp.com/content/new/displaying-session-and-a pplication-variables.asp

and do that in between any user you log in as

You might just learn something and actually get your project finished before 2010

your over there hacking away on your virus infested WaReZ machine

LOL thanks for the good laugh-- i guess its time to do some reading and making my own mods to the program..

btw i never insulted cafrepress.. not sure where you got that from- just advised that what they have is exactly what i want to have done. How much for your service?

It is refered to as the internet guest account but that isn't the actual username. The username is different for every machine. It usually starts off with "IUSR_" and then your machine name. "Internet Guest Account" is always the account's full name as labeled by IIS when it is installed.

Regardless,

If an account isn't listed you have to add it.

Click (add-advanced-find now) and it will list off all the user accounts on the machine

You can also click (add-advanced) and simply type in the account name or part of it.

Some more tips:

If on a local machine you always just give the "everyone" account full control which is pretty much going to make anything work.

You can also go to computer management in your server's administrative tools and view all of the accounts  and groups there under "Local Users and Groups".

Is there a way to set various members to upload a limit of photos. So, one member can only upload 5 photos in 1 album and another can upload 30 photos in 2 albums. Even if you just set a permission for the number of uploads for each member.

Thank you

I checked through the code and could not find anything as well. 

However, I do think it may be related somehow to the code as I get the messages popping up in the error log only after I have edited a banner.

If there is nothing obvious, I may just set my error log to filter and automatically delete this type of error.  Not something I prefer to do.

Thanks for the quick response.

Otherwise the program is working very well and I'm happy with it.

yeah.. I cant say for sure.. as I have never really tried to get it working in xp pro.

Last time I actually used cdonts locally was on a 2000 box

I would do a google search on xp pro, smtp service, and cdonts and let us know what you find out.

All of our apps can use free 3rd part emailing components as well so maybe try some of those. Course you need a valid email server to connect to.

Hi, I haven't heard anything from you.

Has this issue been resolved ?

Thanks

I am trying to import a file, and I get this error:

Microsoft VBScript compilation error '800a03f9'

Expected 'Then'

/aspprotect/password_admin/upload_post.asp, line 6

If Session("Admin") <> "True"
-----------------------------^

Any suggestions on how to fix it?

Thank you.

yeah.. thats an old graphic probably only seen in a few places.

it is not on the main site
http://www.cjwsoft.com/
or here
http://www.aspprotect.com/
or here
http://www.aspbanner.com/
or here
http://www.aspclassifieds.com/
or here
http://www.aspphotogallery.com/

but I am sure there are a couple of pages left over still using it like the aspvendor and asplistings pages.. etc    I am aware of it, just been too busy to go change them and I didn't consider it a big deal

2003 servers are NT based anyway

ok... lets forget about all this redirecting business for a minute

when I go to "GP01.asp" directly via your web site I get a big nasty error that says this

Microsoft VBScript compilation error '800a0411'

Name redefined

/protect/config_inc.asp, line 15

Dim  Address_Required,CDONTS_Installed,City_Required,Registration _Type,VerifyURL,Log_Off_Page
----^ 

then when I look at what you did in that file I see why

you have this code which is totally wrong because you cannot include the password protection file twice

<%@ LANGUAGE="VBSCRIPT" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->
<% GROUPACCESS = "*1*" %>

<!--#INCLUDE FILE="check_user_inc.asp"-->

it should be

<%@ LANGUAGE="VBSCRIPT" %>

<% GROUPACCESS = "*1*" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

and that is probably the root of this entire problem.. the redirection was working...
but you were sending them to invalid pages with errors

all those pages are wrong...

if you dont see the real error above see this

http://support.cjwsoft.com/code/moreinfo11-1.htm

if you look over the aspprotect 7 installation instructions that is the very 1st thing I tell people to do

hopefully this is the info you need to continue and get some work done

Is it possible to set the user account time limits when they register? I am using email verification and am trying to have their accout expire 32 days after their initial login.

Also I have an issue with the email notification not notifying me when a new user logs in. It does a beautiful job notifying the new user.  I do not understand why my server will send to one and not the other, I ahve searched the links but none seem to answer this.

Thank you for your help and insight

and the permissions, how exactly were they set ?
I find a lot of customers think they are setting permissions correctly when they really are not. That's why I wrote that long article on the subject.

As you probably know a data connection is a very low level thing. It is the foundation of any ASP application that communicates with a database. Unfortunatly it sometimes takes a while to get the hang of setting them up without issue.

Everything must be perfect.. the ODBC drivers must be up to date, folder permission are critical, sometimes you must use a new version of the access database.. etc etc etc  The errors and things that happen when all these things are not perfect and not helpful as you have found out.

I would suggest you download and get ASPTest from CJWSoft running before you go any further. It is designed to be as simple as possible and helps get a hang of the database setup process.

I am not sure totally understand your question.
I need you to explain it differently.

Any ".asp" page that is protected is going to automatically prompt them for a login box or log them in automatically depending on if they set that option.. In the end returning them to that same page.

So, it really all takes care of itself for the most part.. It doesn't even matter if the bookmark a protected page deep in your site. The system is smart enough to keep them at that page as well as handle their access.

Now of course if they are at an unprotected page of your site and navigate to a protected page they get a loin prompt or are allowed in if they already logged in...

Also.. when you say unprotected page ? do you mean ".htm" or ".asp"

Not sure because of the nature of the javascript method

for starters tighten up the html around the banner call

change

<tr>
<td width="460" height="60" align="center" valign="middle" class="imagead">
<!------- ASPBanner Ad code ------------->
<script language="JavaScript">
var code = '';
var now = new Date();
var nIndex = now.getTime();
document.write('<s' + 'cript src=" http://www.nababaseball.com/aspbannernet/aspbanner/injectban ner.aspx?BannerZone=1&nocache=' + nIndex + '">');
document.write('</' + 's' + 'cript>');
</script>
<script language="JavaScript">document.write(jscode);</script >

</td>

to

<tr>
<td width="460" height="60" align="center" valign="middle" class="imagead">
<script language="JavaScript">
var code = '';
var now = new Date();
var nIndex = now.getTime();
document.write('<s' + 'cript src=" http://www.nababaseball.com/aspbannernet/aspbanner/injectban ner.aspx?BannerZone=1&nocache=' + nIndex + '">');
document.write('</' + 's' + 'cript>');
</script>
<script language="JavaScript">document.write(jscode);</script >
</td>

If that doesn't help I would suggest using the ASP 3.0 version of ASPBanner. It can serve banners to a any type of page extension and it runs just as well as the .NET version. There is a new iframe method for calling banners that you can try instead of the javascript. The iframe method is explained in the ASPBanner Unlimited section of the forum.

Sorry, there is no option for that.

I'll take it into consideration, but the way the banner rotation logic works would make adding such an option very complicated.

Just give it  an expiration date way into the future if you do not want an ad to expire anytime soon.

I usually just make all my ads expire in like 2020 or something like that since I don't want them to stop running either on some of my sites.