I have a user who is trying to login. However, I am getting a error that I can't seem to find.
Username: executive.barcheski
Password: executive@amcpc.com

Encrypted Password: Ū?=¨`Ł…Ü

Error on check_user_inc.asp line 114

If (Request.Cookies("PASSWORDSYSTEMCOOKIE")("KEEPMESIGNEDIN") = "True") And (Request.Cookies("PASSWORDSYSTEMCOOKIE")("COOKIE_USERNAME") <> "") And KeepSignedInOption And Status <> "Checkem" Then
CheckUserSQL = "SELECT " & tbl_label_users & ".* FROM " & tbl_label_users & " WHERE (Username = '" & RC4(Request.Cookies("PASSWORDSYSTEMCOOKIE")("COOKIE_USERNAME "), CookieEncryptionKey) & "') And (Password = '" & Replace(RC4(RC4(Request.Cookies("PASSWORDSYSTEMCOOKIE")("COO KIE_PASSWORD"), CookieEncryptionKey), PasswordEncryptionKey),"'","''") & "')"
Else
CheckUserSQL = "SELECT " & tbl_label_users & ".* FROM " & tbl_label_users & " WHERE (Username = '" & Username & "') AND (Password = '" & Replace(RC4(Password, PasswordEncryptionKey),"'","''") & "')"
End If

CmdCheckUser.Open CheckUserSQL, ConnPasswords

error received: unclosed quote after 'Ū?=¨

Any ideas

Jason Johnson

While attempting the database connection test, I receive the following error:

Server Error in '/' Application.

---

Security Exception

Description: The application attempted to perform an operation not allowed by the security policy. To grant this application the required permission please contact your system administrator or change the application's trust level in the configuration file.

Exception Details: System.Security.SecurityException: Security error.

Source Error:

An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.

Stack Trace:

[SecurityException: Security error.] aspprotectnet.DBConnectTest.Page_Load(Object sender, EventArgs e) +0 System.Web.UI.Control.OnLoad(EventArgs e) +67 System.Web.UI.Control.LoadRecursive() +35 System.Web.UI.Page.ProcessRequestMain() +2112 System.Web.UI.Page.ProcessRequest() +218 System.Web.UI.Page.ProcessRequest(HttpContext context) +18 System.Web.CallHandlerExecutionStep.System.Web.HttpApplicati on+IExecutionStep.Execute() +179 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +87

No problem. I get it now.

I added a Session Variable for "Counter". Then wrote an If statement around that. When the user logs on for the first time they see a window pop, after that the normal start page.

Thanks

It appears there is an auto logout after inactivity for a period of time.  How does one change the default time allowed for inactivity?

thx

You can also try setting asphttp's user agent property to some browser version like in this example. It might stop that info from showing up when it fetches a page from the server.

<%
Dim BanObj1Http
Set BanObj1Http = Server.CreateObject("AspHTTP.Conn")
BanObj1Http.UserAgent = "Mozilla Compatible (MS IE 3.01 WinNT)"
BanObj1Http.Url = " http://banserver.powerasp.com/aspbanner/aspbanner_inc.asp?Ba nnerZone=1"
Response.Write BanObj1Http.GetURL
set BanObj1Http = nothing
%>

Also... I dont know if these values below will work but I got them from looking at my nt logs.

Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1)

Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0)

And here is more info on the asphttp component and it's settings.
http://www.serverobjects.com/comp/asphttp3.htm

I would also double check that you changed the field size correctly and on the correct database that is being used in the connection string

If you still cant see the upload buttons after checking the settings send me a PM with the info and I will take a look at your installation. It will have to be up on a live server of course.

Different Versions of the Access Database

Below is a zip file with many alternate versions of the Access Database provided to help with installation and general usage.

2005-02-20_155310_ASPProtect_Database_Versions.zip

ASPProtect.mdb is saved as an Access97 database (password "temp")
ASPProtect_access2000.mdb is saved as and Access 2000 database (password "temp")
ASPProtect_access2000.mdb is saved as and Access 2002-2003 database (password "temp")
ASPProtect_access2002_no_password.mdb is saved as and Access 2002-2003 database with no password set on it

Try to use the newest version as server odbc drivers sometimes have to use the newest version for everything to work correctly. No password version is provided because sometimes there are issues connecting to a database with a password set on it.

Default username for access databases is of course "admin" but you really dont use that except in the data connection information.

I'll give it a shot loading it on the laptop and publishing it, if it doesn't work I'll let you know and you can take a look at it tomorrow afternoon.  Thanks for all the help tonight...

Good luck pouring that concrete!

Both the NET and Classic ASP versions of this application are designed for fine granularity protection of individual apsx extension files. ASPProtect.NET is not designed or intended to protect sub directories, or non aspx content such as Adobe Acrobat .pdf files etc etc.

I completely disagree with your statement that “most sites” have a login box on the left hand side of the page. I suspect you thinking of the ever popular php based forums and “Nuke” type CMS systems which are set up that way but if you look at any site written entirely using .NET that’s rarely if ever the case. (Granted I cant say for sure because I personally haven’t looked at >50% of the estimated 18 billion +  web pages on the internet) Just off the top of my head www.CafePress.com come to mind as a pure .NET site. If you take a look the login button it takes you to its own login page there is not global login form used throughout the site. Reason being that .NET introduced this thing called a “view state” which is used to store things like your session ID (and way more) and must be posted back to the server in order to keep track of visitors. This technology comes in especially handy when you have a web farm in place and your content is being spit out out by more than one server at the same time

I can think of loads of scenarios where the web servers need to know who you are even though you are never directly contacting them via http. This approach is a very smooth and actually very clever solution for enterprise level websites that simply can’t be handled with a single web server.

 On a practical level I know what you are saying but that application sets up all sorts of things when a protected page is accessed and the user is not yet authenticated. That’s the entire reason you need to put that snippet of code at the top of a page you want to protect. That code snippet calls the ASPProtect.NET class and runs through all the logic to see if you are able to access the page. If you are the subroutine exits and the server continues to process the remaining logic on the page. AKA you are able to access its content. If you are NOT authenticated ASPProtect will setup all the proper session and viewstate info and redirect you to the login page for authentication. You may have also noticed a parameter on the login page called ReturnURL. The application looks for that info and if you do have a user ID and password the application automatically redirects you to the page you were trying to access in the first place.

Really I have no idea what you are trying to do, but there is a world of difference in how something looks verses how it works. Lets just say there was a simple way to do what your thinking, what are you going to do with that login form after the person logs in? Just keep displaying it on the entire site so people get confused and don’t know if they are logged in or not? Just that little part of the equation will require making some changes to either ASPProtect.NET or your application will have to have some logic built into it to stop displaying the login forum.

It sounds to me like your basically looking for a super simple 101 type deal that allows people to sign up for an event and you the admin can see that information? I’m guessing they can also log in again and check out their details and see what event they signed up for?

If that’s the case you’re trying to take a very sophisticated protection application and downgrade it into something that would be one heck of a lot easier to write all from scratch in about an hour.

Your not going to be able to “plug and play” a simple form into a page and turn that application as a magic universal login solution for a website, while its 100% possible to use the application that way if you choose, you need to check out the source code and plan your custom integration accordingly.

Chris, if there is no way to change this, I understand. I just though maybe it might be possible and I can't find out if i don't ask.

Thanks Chris.

Let me know.

-john

I did not make a mistake.. what I typed is what I meant to say. I think maybe you are taking it the opposite way as I explained it.

Regardless,

What you want to do... logging them in under https and then having them continue though the site under http is not possible.

It doesn't work that. way. As far as the webserver is concerned https is a totally different site than http and each have their own unique set of application and session variables.

In a sense no different than www.somesite.com is different then somesite.com (each has their own unique set of application and session variables as well).

Now, because of the nature of Forms Based Authentication session varibles created under one will not carry over to the over and thus no password access if you switch over from a secure url to a non secure url.

If you want them logging in under SSL you need to keep them under SSL.

That is not to say there is some ultra complex scenario to mimic the session variables on the non secure side of things (possible with a complex http post to a non secure page from the scure page telling it what variables to create and set), but doing so means a ton of work and also has security concerns of its own.

rrabago

I have been looking over the code and also doing some tests.

So far everything in the code looks correct and everything I have tried has worked correctly. If I select an access level and active users it is not sending emails to inactive users as you stated.

Are you using the option pack ?

it is by design actually and something that can be improved
(I just never thought of it when I 1st designed the system and it is actually planned to be added in Version 8)

The trick would be to reset those session variables anytime someone edits and saves their information... not very hard at all

you would do it on the save code page for when a user edits themself.
you want to grab the info posted from the form and  reset each session variable at the same time everything is re-saved to the database

example

Session("Company_Name") = Request("Company_Name")

Weird things happening, when I upload using the vb method the image fails and error is that the image was empty.

Utilizing ASPUpload and after clicking upload file I get a blank screen, no preview, no nothing (it loads with the proper header/footer) but a completely blank body.

Any hints?

I dont know about the unspecified errors. I really need more detailed information. (Since it has been working fine for quite a long time you might want to consider installaing the application from scracth again and see if you still get errors)

As for the log in not persiting. Did you by chance turn off cookies in your browser ? They are required for forms based authentication to function. Otherwise, yes you would need to log in to each and every page as you moved around.

This user is talking about preparing more than 100 pics at a time for an album that already exists and doing it using linux.

I asked the user to post the code here because I think it is interesting and it may help someone who is working with the app.

This article is not for everyone for a few reasons.

1.) The application can already mass import pics on it's own. It does 100 pics pretty quickly on a decent server. The built in method also resizes pictures and make low res thumbnails should your server support a supported ASP image resizing component. The method above simply rename pictures in a folder so the application will see them as part of an album.

2.) We don't support or recommend that anyone sets the application to use more than 100 pics per album. It is just not tuned for that and there will be issues. Please dont ask me what they are as it is complicated and I am not sure/dont remember what they all are.

3.) Your going to have to be familiar with linux to use the code shown above.

Just having the database with members does not protect the page.  You need to add the appropriate code to every page you want to restrict access to.

You need to click on the Groups tab in Admin. 
Click on Generate PW protection code. 
Click on the basic button if you don't want to include levels or groups or choose a level or group(s) and click the appropriate button. 
Paste the code that's generated  into the top of an ASP page in code view.

Is that what you're looking for? 

Michelle

Well. fontpage publishing is evil. That you have found out.

Do not use it. It usually wont work right when running asp code locally and also at the server because of differences with the paths and virtual directory structure. etc etc etc

You can definetly use frontpage to connect to the web site live and drag and drop files into it/edit them... but the sooner you stop using the publishing feature the better off you will be.

I made the changes like you suggested, but now the page just times out before even loading. 

<%
ConnectionString = "DBQ=D:\clients\rklarman\DrWeisbergUsers.mdb;Driver={Microso ft Access Driver (*.mdb)}"
DatabaseType = "MSACCESS"
%>

You not getting a blank page.. you getting an error. You just can't see it because it appears you edited the page background to black.

error '80040211'

/aspprotect/scripts/emailing_subs_inc.asp, line 174

Triple check the upgrade instructions because I think you missed something important.

line 227 on "/password_admin/save.asp" refers to the "Password" field

the error your getting most likely means it is not there..

Pay close attention to the areas in the upgrade instructions regarding renaming your existing "Password" field to "Old_Password"

Then making a new "Password" field and carefully following the instructions needed to convert your old passwords for use with the new system.

If you don't everything carefully and perfectly this is the sort of error you will get.

no, you cannot unless you plan to write a lot of custom code.

That is why the option pack has groups which eliminate the need to use access levels because groups can do everything access levels can and more.

There is an article here regarding that.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=32& PN=1

That bit about zones makes perfect sense and seems surpassingly simple for me to integrate due to our categories and page contents being based on the same if/then functionality.

Regarding the user, I guess you mean that I could simply recreate a limited admin interface for users based on the interface you have included for me, is that correct? I realize how subjective the question is, but do you think that this would be a bad idea?

I'm leaning toward your software here. I have a budget that could easily cover a variety of programs, but the UI for advertisers at banmanpro, for example, seems far too complicated for my users. Also, banmanpro doesn't have supporting compatible softare I am interested in, such as your classifieds software.

I guess I am trying to buy a good shell from which I can do my own customization and coding, and into which I can integrate future additions such as your classified ads. Does this seem like the right place to be?

Thanks much for your time!

btw: who is this hosting company anyway ?

and did they give you access to a control panel that lets you manage your site ? sometimes that is where you manage those permissions if their interface supports it

lastly, are frontpage extensions installed in your web so it can be connected to via frontpage ?

Hi, its just not something i can suppport as I do not support custmizations to the code epecially when dealing with an image component that is not supported by the application.

Sorry, its something you have to figure out. Bascially I would suggest looking at the existing asp image resizing code and using that as a guide.

Have you considered just buying a license of ASPImage and asking the host if they will install it after you purchase it. It sounds like it may save you a lot of time.

If you are ever looking for a good host for ASP. www.alentus.com is one of the best. There 9.95 plan gives you access to 3000.00 of commercial quaility asp components also which is nice.

One is for paypal subscriptions (recurring billing) and the other is for single payments

http://support.cjwsoft.com/forum/forum_posts.asp?TID=185& ; ; ;PN=1

http://support.cjwsoft.com/forum/forum_posts.asp?TID=186& ; ; ;PN=1

You can delete any of the 3rd party payment directories you are not using including the the 2checkout one... (all those folders really are is a copy of the users folder specially modified to handle a certain payment processor)

Just Don't delete the "users" folder though as there are things you do there that you can not do anywhere else..  quite a few things..  editing existing account info, looking up passwords... etc etc

actually  I just went to it again and it was somewhat slow coming up this time..

perhaps you have some issues with the sql database.

it should be instant.. like this one I run on my server
http://banserver.powerasp.com/aspbanner/

I suppose it could also have something to do with sql server resources but its hard to say..

Hi there,

Just bought ASPProtect 7.0 last week and just got around to installing it. I've gotten through the installation and am now trying to test the (Forgot Password) functionality.

I get the following error when I type in the e-mail (or in some cases the username) and Post the form. 

Error was [11004] Valid name, no data record of requested type

I know that the add user functionality is pointing to the correct database (I see the additional rows via SQL Enterprise Manager) and that the e-mail address I am looking for is in the SQL database. 

Any ideas? Any other information you need?

Thanks,
Toni