Additional Information.

A set of these variables get created for every user that logs in to your site.
For performance and memory conservation reasons some of them can be turned off and are optional.

If you look in the "check_user_inc.asp" file or the "check_admin_inc.asp" file you will see a section of code like this


   ' Start of optional session variables to be set
   ' Recommended that you remark out any of the session variables below that you don't really need to use
   ' This will save a lot of server resource because every user logged in has a set of these
   
   ' I added some code here to not create these if they are empty
   If CmdCheckUser("First_Name") <> "" Then Session("First_Name") = CmdCheckUser("First_Name")
   If CmdCheckUser("Last_Name") <> "" Then Session("Last_Name") = CmdCheckUser("Last_Name")
   If CmdCheckUser("Company_Name") <> "" Then Session("Company_Name") = CmdCheckUser("Company_Name")
   If CmdCheckUser("Email") <> "" Then Session("Email") = CmdCheckUser("Email")
   If CmdCheckUser("Address") <> "" Then Session("Address") = CmdCheckUser("Address")
   If CmdCheckUser("City") <> "" Then Session("City") = CmdCheckUser("City")
   If CmdCheckUser("State_Province") <> "" Then Session("State_Province") = CmdCheckUser("State_Province")
   If CmdCheckUser("Zipcode_Postal_Code") <> "" Then Session("Zipcode_Postal_Code") = CmdCheckUser("Zipcode_Postal_Code")
   If CmdCheckUser("Phone") <> "" Then Session("Phone") = CmdCheckUser("Phone")
   If CmdCheckUser("Custom1") <> "" Then Session("Custom1") = CmdCheckUser("Custom1")
   If CmdCheckUser("Custom2") <> "" Then Session("Custom2") = CmdCheckUser("Custom2")
   If CmdCheckUser("Custom3") <> "" Then Session("Custom3") = CmdCheckUser("Custom3")
   If CmdCheckUser("Custom4") <> "" Then Session("Custom4") = CmdCheckUser("Custom4")
   If CmdCheckUser("Custom5") <> "" Then Session("Custom5") = CmdCheckUser("Custom5")
   If CmdCheckUser("Custom6") <> "" Then Session("Custom6") = CmdCheckUser("Custom6")
   
   ' End of optional session variables to be set

If you do not need a particular variable to be set as a session variable simply comment that line out with single quote.

If you have an extremely busy site with a lot of users this is a good idea. If not, you probably don't need to bother doing this. I added some code in there so they will not be created if they are empty and that alone helps out a lot.

Nobody ever asked me, so i guess npegley sorted it.

The solution is indeed a single line added to your button form code ..

eg :

<input type='hidden' name='return' value='http://www.your-return-url/here.asp'>

This will overwrite any settings you have in your paypal preferences.

I posted this reply for anyone stumbling on here with the same problem. Hope it helps. :)

Dave.

Our webhost changed converted all sites from c: to d:, and without us doing anything else, our customers now get the following error message when trying to access our Classifieds site:

***********

Microsoft][ODBC Microsoft Access Driver] Not a valid password.

This means there is most likely a problem with the "ConnectionString" info that you specified.

If you are using a DSN-Less Connection with MSACCESS.

Check that the physical path to the database has been specified correctly.
It has to be perfect and correct. It cannot be specified using "http://" or by using "server.mappath".
It has to be specified like the following example.

ConnectionString = "DBQ=D:\Inetpub\wwwroot\advpass_pro\_database\passwords.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=admin;PASSWORD=Xpass"

If this is running on an NT server or Win2000 Server make sure that permissions have been set on the database.
Only the server admins can do this. If you are not the admin you will have to ask for this to be done.

If you are using a System DSN

It is not set up correctly. Again, make sure the permissions have been set for the database and that the system DSN has been set up correctly by the server admins.

************************************************************ *********************

We did everything the web host asked us to do, that is, changed all references to the C drive to new references to the D drive, but the error is still there.  We also never changed any passwords (as far as we can remember).  Can someone please tell us where to look (also which file might tell us what the correct password is in case it has in fact been changed.

Perfect. Thanks buddy :)

I have a very weird problem.  At the top of the page, where there used to be

[Place Ad] [Classifieds Home] [Register] [Sign In]

now there is only

[] [Classifieds Home] [Register] [Sign In]

so the words "Place Ad" have disappeared completely.  Can you please tell me which file in which folder would control this

[QUOTE=cwilliams]
Is that a real term or just something you named it cause they have like a zillion people using that SQL server?[/QUOTE]

yeah thats it, you buy into a part of the sql server so it's an sql server hotel...

No rush, I have it out on the internet, but have not gone live with the site yet.

Thanks for responding,

Enjoy your well deserved break

You really should just look at the documentation that came with the application. It tells you everything you need to know.

it is in the docs folder in html format.. it is also linked to from the aspclassifieds website

http://www.aspclassifieds.com/demo/docs/

well, you should probably be backing up the SQL database on a regular basis. That is between you and hosting company. If they let you connect via SQL Enterprise Manager you can do backups on your own.

As far as the aspprotect files and folders go back them up somewhere, and then only worry about backing them up again if you change some of the files.

That's really all there is to it. None of the ASPProtect files change on their own except the generated log files that you may or may not care about backing up.

I mean the important thing is the Database, and then of course any your own .asp pages that you protected as well as any custimizations you made to the users area or your site...

Turn off "Show Friendly HTTP error messages"
If you are getting errors with your ASP application go to Internet Explorer and make sure this setting is unchecked. Having this checked can cause a generic error to be displayed in you web browser when ASP code encounters an error. This generic error message doesn't really help you fix the problem. Having this setting unchecked will usually result in a more detailed error message and the line number the error is occurring at, thus giving you a good clue as to where the problem is within the ASP code. If detailed ASP error messages have been disabled at the server level this setting will make no difference.

thx, thats a known error I forgot about.

I just updated the zip archive so the error is gone but if you bought ASPBanner Unlimited Version 7.3 Before April/06/2004 you can optionally apply the fix.


To fix it (only if you want to use the option explicit method of calling banners and not even a really necessary fix as this is just an error in the generated code your supposed to use)

Just edit aspbanner/zones.asp with a text editor.

Where you see the double dim carefully remove one of the "dim" s and save the file.

I am getting closer.

This error actually does not have anything to do with the forgotten password feature or your database.

It has to do with the settings you chose for emailing.

it relates to aspmail and it not liking the remotehost you used, or something like that.... etc etc

An email I just received from eastcoastguy.. to keep this thread up to date

It almost seems like allow images is denied.  When I look at the ad it doesn't even show a place where the thumbnail or image would go:

Columns now are Ad Name/ Price / Expires / Hits

There used to be one before Ad Name.

Even unchecked (saved) and checked

Use_Picture_Upload

< = value=True name=Use_Picture_Upload> Check this if you will be using the picture uploading feature.

Installed latest verison  Doesn't seem to have corrected problem.  Still with same message.  I wonder if deleting this user and putting him back in might help.  I have not however tried any other user names and passwords.

Hi,

Actually that is not a feature at this time. Only the admin can add an image for user. If you look at the code for that you could adapt it for individual user use fairly easily provided you are decent with ASP.

That feature will probably be added some day, but there was no time to add it to into the current version and I can not give you a time on when it will be added. The complicated part is making some sort of approval process in case a user adds something undesirable and also limited file sizes which is hard to do without somesort of 3rd party uplaod component being involved.

If you re-start the web via IIS, reboot the server, or (possibly) just add and remove a category... that will clear up.

ASPClassifieds and ASPListings must be installed in seperate IIS applications if they are the same web. Otherwise the category caching system of each system will interfere with each other. They were never intended to be installed in the same web together since ASPListings is merely a stripped down version of ASPClassifieds and they share a lot of the same code. Like I said though if different IIS applications are set up in the web site you can do it because each IIS application will have it's own set of application and session variables.

But can you guess as to why the following might be happening:

1) The password is still "temp", and we verified that by checking dataconn_inc.asp ; 2) People are able to place new ads, etc. ; 3) We then download the DB.  Sometimes we are able to open up the DB just downloaded with the password "temp", but only see the USERS table.  At other times, we cannot open the same DB with any password, and get a "password not valid" message even when using the password "temp".

So what can the problem be?

Humm, I can see all those pages loading just fine at both domains so you got me pretty confused at this point as you just said they didnt load.

regardless, the data connection tests are failing with both of them.

so let me ask you again how are you setting permissions on the database folders?

It really means just what it says. Your connection string is just not valid and the sql server speicifed can not be reached. The username and password could also be invalid. Since you already had a database set up you should use the same username and password you have always been using. You also need to use the same database name you have always been using. Without actually knowing more and seeing what you are doing it is pretty hard to tell you anymore than that.

The directions and sql scripts given are for setting up a new sql database. Applying them to an existing sql database requires a slightly different approach. Modificiations to the SQL scripts elimintating references to the usernames/password/database we suggest in the scripts is also a good idea.

A data connection is a low level as it gets. Until you get that working you are really not even touching any of the code in the ASPListings application.

If you want I have no problem going into your sql server and web and setting up for you correctly.

A correctly configured Microsoft SQL Database is critical to the correct operation of the ASPBanner system.

Table & Field settings must be exactly the way we set them in the database creation scripts provided with the ASPBanner system.

Below are screenshots of the design view settings for all the tables used in the ASPBanner system in case you want to double check them

In addition to the settings above each table has one field that is a primary key with an auto increment of one

In the screenshots above each of those fields has a yellow key next to it.
If the field does not have yellow primary key icon on you just right click and the option to make it one appears.

The SQL column settings for each one of the primary key fields must be set as follows




In addition to these settings the SQL scripts provided with the system auto populate the Banner_Users table with two users. This is very important because without the Admin user the scripts add you wont be able to log in to the ASPBanner system as an admin.

Is there a limit to how many access levels the program has?  We were thinking of having a different access level for each client that logs on our site so we can customize their web experience.  We see 6 in one place of the program, 8 in another, but is there any reason why we couldn't make 100 more?

Thanks again for the help!

It's just a generic error that means one of 1000 different things is wrong.. there is a lot of information on in in these forums as well as links to articles about it.

http://support.cjwsoft.com/forum/forum_posts.asp?TID=27& PN=1

usually it means permissions to the database folder are incorrect or the physical path you are specifying for your dsn-less connection is invalid..

everything has to be perfect

The version of aspbanner you have should not matter.

What you are doing here is wrong.

<PARAM NAME=movie VALUE=" http://www.innovationtools.com/aspbanner/aspbanner/banner_re direct.asp?Banner_ID=25">

PARAM NAME=movie is supposed to link to your ".swf" file.
And thats why all you see is black.

I don't think you quite understood all of that information fully.

Your ".swf" files needs to be coded in FLASH to link to the aspbanner redirect url. You don't change that flash calling code like that.

The ".swf" file links to the aspbanner redirect url which tracks the click and then redirects the user to the Link URL

You basically need to code your ".swf" flash file to go to that aspbanner URL or code your flash file so it can take a parameter for the url it clicks to (like the macromedia article talks about. This has to be done when editing the flash file in the flash editor before the file is saved.

If you dont have access to the original ".swf" to edit it and re-save it.. your out of luck as far as tracking clicks goes

http://gibsoncity.info/guestbook/default.asp

Reports 65-messages, however after the first 10 are displayed and you click on the More Messages button, I get the Page cannot be found error.

as far as sql goes if you follow the instructions with give for setting up a new database you shouldnt have any issues and permissions should be already set. because we handle that in the sql script we give you.. "its a good thing to look at and it is pretty easy to understand what is going on""

however using another account could cause permissions issues.."yes, even sa"     basically the username your using needs datareader and datawriter permissions to all tables used by the photo gallery system and you probably have to go specifically set them usin ght e security tab for your database in enterprise manager. This is more of SQL server 101 than anything to do with the Photo Gallery Code so I am not going to get into it too deeply, but that is definetly the issue.  Permissions...