While attempting the database connection test, I receive the following error:

Server Error in '/' Application.

---

Security Exception

Description: The application attempted to perform an operation not allowed by the security policy. To grant this application the required permission please contact your system administrator or change the application's trust level in the configuration file.

Exception Details: System.Security.SecurityException: Security error.

Source Error:

An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.

Stack Trace:

[SecurityException: Security error.] aspprotectnet.DBConnectTest.Page_Load(Object sender, EventArgs e) +0 System.Web.UI.Control.OnLoad(EventArgs e) +67 System.Web.UI.Control.LoadRecursive() +35 System.Web.UI.Page.ProcessRequestMain() +2112 System.Web.UI.Page.ProcessRequest() +218 System.Web.UI.Page.ProcessRequest(HttpContext context) +18 System.Web.CallHandlerExecutionStep.System.Web.HttpApplicati on+IExecutionStep.Execute() +179 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +87

Hi there, I am not exactly what you mean when you say "moved some of the include files to user"

are you saying you are moving files around ? I am not sure what you mean there.

but.. the parent path issue is described in detail here

http://support.cjwsoft.com/code/moreinfo5-1.htm


Having is enabled is actually a requirment of the photo gallery application as stated on the web site
http://www.aspphotogallery.com/aspgallery_pro.asp

You can certainly still use the apllication but as that article says you will need to change any file includes to virtual includes so they will work with parent paths disabled

Banners no longer show up on my site ?

If banners were working fine and now they are just not showing up.
1st check to see that you are calling a valid zone with live banners in it.
If you are then most likely this it what hapened.

The web server must have crashed or lost power and now the application variables are in limbo/not working.

I have seen this happen a few times.

Basically the application variable system gets messed up because it was not shut down properly.

The way to cure it is as follows.

Edit and save a banner in the system. Hopefully that gets things going again.

If this happens a lot it is a server issue, not ASPBanner's fault.

... doesn't seem to be working on my site. I expect I did something wrong.

I've created some groups, "week", "month", and "year". Their IDS are 6, 5, and 4, respectivelty. When someone goes through the PayPal signup, he's assigned to one of those groups based on his subscription.

When I see a new subscriber and check the relevant group the person's supposed to be in, that person's not in that group. I'm adding them manually for now, but I'd sure like a solution for when I go to sleep...

My subscription code looks like this:

input type="hidden" name="custom" value="5,*4*,<% =User_ID %>

One-off code looks like this:

option selected value="7,4.95,1,*6*"

I've created the groups in my management console. Is there anywhere or anything else I'm missing?

Cool.

Well I'm in the middle of uploading the txt file and it's about half way done and sitting there...so I'm keeping my fingers crossed.

Well. fontpage publishing is evil. That you have found out.

Do not use it. It usually wont work right when running asp code locally and also at the server because of differences with the paths and virtual directory structure. etc etc etc

You can definetly use frontpage to connect to the web site live and drag and drop files into it/edit them... but the sooner you stop using the publishing feature the better off you will be.

maybe this is the issue...

do you realize that the descriptive name you give a group is not always going to be the same ID in the database ? The two are not related.

Perhaps what you named Group 1 is really group ID 3

You can tell for sure by generating protection code for group 1 and see what ID it tells you to use..



You also need to remember that you are testing this with different users and it is really easy to get confused so you need specifically log off using the log off page to ensure session info from the previous login doesn't show up and cause confusion when you log in with a different user... etc etc

in addition to logging off that way you may also want clear the session and application info via the code at the bottom of my article
http://www.powerasp.com/content/new/displaying-session-and-a pplication-variables.asp

and do that in between any user you log in as

1st off.. you appear to have some strange things going on with that domain. Looks like you have a frameset and are loading another domain in it which is always confuding especially if you are running the site off your home computer or something... I am not sure

That aside..

If I go to

http://www.bones.myftpsite.net/rfamilystuff/default.asp

and click on the "familiy" category

then right click on a broken image.. look at properties

Your linking the image to your localhost

see

http://localhost/rfamilystuff/pictures/Pic_3_1_thumb.jpg

and that is wrong, just like I said above

Nobody running the site off any computer but your development machine is going to see those pictures because the url isnt valid for them

My guess is in the settings you have the "PictureURL" set to

http://localhost/rfamilystuff/pictures

when it should be

http://www.bones.myftpsite.net/rfamilystuff/pictures


Good luck with this.. I am going to the bar.
If you need more help I probably will not be available until Monday.

It does not matter what directory name the ASPProtect files and folders are in but you cant go moving around critical file and folders like it appears you did nor is there any reason to.

All that is is saying is that the users folder, the password_admin folder, the scripts folder, the check_user_inc.asp file, and all the other files and folders that come with the system can be in any directory name as a whole.... but that doesn't mean you can go messing around with the files and folders in that directory.

I assure you 100's of users do not use "aspprotect" as the main folder name and they have no issues doing so.

Regardless, you need to explain in much clearer detail exactly what you did and what paths you used and what is where.  At this point I really do not know what is you did as your post was not clear to me.

You should also check that you have entered correct path info in the admin settings page area. The register page is one of the paths that geths set there.

humm

expiration dates in the aspprotect system are not used at all when using paypal subscriptions.. all date handling is done on their end actually

and they of course send notices from their system to the user regarding their subscription and when it renews,cancels, etc etc

so I am pretty sure any errors with that would have more to do with the info you used for the subscription setup and possibly any paypal settings associated with it

its hard to say at this point

The smart thing to do I think.. would be to sign up someone using another PayPal account (your allowed 2)... and while doing it be very careful about the subscription setup data.. and then as soon as the subscription is created review all the info in the paypal system and see if the length of the subscription / expiration.. etc etc in the paypal system info looks right..

at least then you can begin to troubleshoot what is going on...

Hi,

I only just purchased the product and I would be very keen to

a) is the upgrade available very soon as I don't want to spend the time developing one and than find the other released shortly & 

b) would I only need to pay the difference for the upgrade or have I already downloaded the upgrade already.

I cant see what version I current have.

I look forward to your response.

User Registration

The "users" folder allows users to sign themselves up and edit there accounts as well as retrieve lost passwords..

In the settings tab of the ASPProtect admin area there are options for which fields are used and which are mandatory when a user signs up. The only validation the system performs by default is checking for mandatory status. If you want to add more validation so reduce the chances of input errors that is up to you.

You can add additional server side validation by doing server side checks on the save pages... you can also make the field sizes larger in the database if you think you need to. You'll need to be good with ASP to do this.

Always backup your files before making changes to them so that you can revert back to a working copy if you mess something up.

Same here.  Thinking it might be server load or the bandwidth to the server.

Thanks for checking!
Lance

how di I change the currency dollar sign to gdp pound sign ?

I need all my tranactions in gdp puund sterling to use on paypal

regards

simon

again I will ask you what is the real error??

see the link above when I asked you the 1st time.
(I need the error details and line number.. etc etc)

and what kind of a server are you trying to run it on ?
you mention xp pro but in a confusing way ?

Is there a simple way to upgrade from 7.x Lite to 7.x Full?  I was testing out the software and I just purchased it.  I have made some look and feel changes to the lite version (ie: login page), but no look and feel changes to the admin section.  Is there certian files that I can add to have the full version without shorting myself features or functionalbity? 

Thanks

Is it actually possible, with your product, to password-protect the folder that has the actual database without having to require customers browsing the listings to enter a password, or will password-protecting the database folder prevent customers from browsing the classifeds listings?

I have narrowed it down.  The ../ for includes will not work with .asp files but will work in .shtml files.

any ideas?

I'll send you something..

It a generic error that means something is wrong with your data connection.

http://support.cjwsoft.com/code/moreinfo27-1.htm

http://support.cjwsoft.com/code/moreinfo136-1.htm

Okay, hopefully I'm posting in the correct area this time.

Currently we are utilizing ASPProtect 7.x

When using the Newsletter function, many members are indicating they are not receiving email.  No evidence of email in SPAM folders.  Also, when checking with email provider, they insist it is not being filtered prior to delivery to member's email address.

The following message does appear when a newsletter is sent.

error '8004020f'

/newsite/ASPprotect/scripts/emailing_subs_inc.asp, line 124

Line 124 is the line of code to 'send' the emails.  We have approx. 860 members who are on the list to receive the newsletter emails.  I have no way of knowing how many are not getting the email. Based on anecdotal evidence, I'm guessing it could be as high as 20%.

We are using CDOSYS / SMTP authentication with a real external email with MX records. Our website is hosted by Cbeyond.  They insist it isn't at their end. (for what it's worth)

Thanks for your assistance.

NPA

I've downloaded this neat little app, but I'm having troubles understanding what I should be using.  Cassinni or IIS, can you help?  I've tried to look at the help, but it is very vague on what to use in each situation. 

Any help is appreciated. 

Cheers

need more info..

are you using aspimage to resize images and make true thumbnails..
(because if you have it turned on and it isnt actually installed on the server you will get broken thumbnails.)

what kind of images are you using ? gif or jpegs

are you uploading images over existing images ?

really need to know exactly what to do to reproduce the situation from scratch and then I can give you a better answer ??

(FREE) Nov 23 2005 Update Files

If you purchased ASPProtect Version 7.x before Nov 23 2005 then you can download these Update Files.

(These are non-critical updates.. only update if you want the described changes below)

These updates do the following..

• Make the Tabs in the Admin area move up and down as you navigate around so they look more like tabs used in a file cabinet.
  
• Updates the import/export process so the tab delimited text files created now store the passwords in plain text instead of encrypted. I have been thinking about this one for a while now and I think it is better this way as it was confusing a lot of people. If can also kill the whole process if by chance the encrypted output of a password contains a line break of sorts. There is no way to deal with that scenario so this is way the import/export process is going to work from now on. This also means you should be VERY carfeful about leaving export files lying around as they will have the passwords in them.
  
• Updates the "expected_paths.asp" in the data folder because the paths it was generating had an extra "data/" in it.
  
• Updates the users page so it will not show the import/export link if you have not entered a path for the export files in the settings.
  
• Adds an Activity Tab if using the Activity Tracking features instead of the links it used to put on the users page that most people didn't see.

To install these just copy them in over the old files.

Now of course back up your existing files so can revert back if there is a problem or you do not like the changes. If you made any custom changes to any of your pages use your head and realize that copying these in over your existing files will overide any custom changes you made. (that is your business, I am just warning you)

2005-11-23_163025_ASPProtect_v7_11-23-2005_update.zip

Chris -

Sorry, I am looking at your code on view_item.asp and I have noticed that you are calling 3 variable; start_date, end_date, and image_url that do not exist in the databases that you provided.  Do I have the updated package for ASPVendor?

I assume you mean 500 pixels wide

no.. because you cant reliably tell a pictures image width without an image resizing component to look it up.. asp can not do things like that on its own

serverobjects has a free component called "imagesize" that can do it as well but you need access to the server to install the component
http://www.serverobjects.com/products.htm

so if you cant do that with regular asp code you definetly can not stop the upload proces because the picture is too wide..

heck, that would be nearly imposible to do regardless.. even with the best 3rd party components at your disposal

even with an image resizing component you would have to allow the upload.. then check the pixel width.. then delete it.. tell the user what is going on...etc etc  .. all a very complicated process

[QUOTE=cwilliams]I would like to delete the SQL tables and set them up from scratch using enterprise manager and sql query manager and see what happens

If that is ok with you let me know.

Something is wrong like I said...  almost seems like the database is caching old password info from the field.[/QUOTE]

Sure go ahead

... in addition it is a virtual include not a file.  I just tried to use file instead of virtual and then the ../ includes worked on the asp pages.

This is strange because they used to work like that on the 2000 server I had these sites running on.

IT worked just as cwilliams said. I did see the IP address being stored in the table but it didn't dawn on me that it was tied in to the view count, I tried it from a different IP address and it worked great .

Good coding Christopher

Thanks

John

Thanks for that. The upload size is just as effective and possibly a better solution to maintain server space.

What about individual gallery permissions. So only 1 member can post in only 1 gallery. I have a forum of 500 plus members so if they want to add a gallery than setting a permission would be idea for each gallery.