Hi,

I don't see any good reason to rename any of those files.

Changing them though may involve changes to the code recompiling, etc etc... it is not something I support.

I've encountered another problem.  When i edit the link for existing banners and save it, the banner reverts to the old link instead of the new one.

The directory where the the database is located to rwed so the permissions is not a problem.

Any advice?

Thanks

check the action for the button in the code... its probably not posting back the the right page which should the same page it is...

I bet ya it is posting to guestbook2 which is the wrong directory... an old mistake I forgot to correct...

The way the application ships there are no password confirmation areas anywhere ? Please be more specific as to what you have done and if any mods are involved ?

If you are talking about one of the MODS please realize they are not supported. http://support.cjwsoft.com/code/moreinfo459-1.htm

Even though they are not supported I look them over pretty closely and I know of no issue like you mentioned so I would suggest re-downloading the MOD. Perhaps you got a corrupt download or file.

as I look at your installation more I notice that you are using MSSQl as the database type.

chances are that is the source of these problems. Fields in the sql database are most likely not all set correctly

it is very important that the sql tables and fields are set up exactly as described and that the sql script we provide runs without error

http://support.cjwsoft.com/code/moreinfo160-1.htm

if you create the sql database other than the way we tell you to or the sql script doesn't do its job setting all the field types/constraints/primary keys/etc..... for some reason .. then weird things like this can happen

at this time this is my best guess as to what is going on

I would examing the sql script we provide and compare the information set in it for each field and table to your existing SQL database to see if everything got set correctly.. I would start by checking these fields 1st of all as they are very important.... (username,password,expiration_date,admin,active)

in the meantime testing the ASPProtect system with an Access database will prove that all the ASP code is working as it is supposed to if you are interested in doing that

Ok, if the link to the import/export screen does not show up its probably because you never put the import/export path in the admin settings?

go check that for me.

cause running that page without a path for the files could cause a timeout.. thats why the link doesn't show if the path is not entered (so people won't run it)

it looks sorta like this (there will be a field to fill in which wont show here)

Settings below specify the physical directory path of the export directory. This is used by the system when using the import/export feature. The export directory needs modify permissions for the anonymous webserver account.
ExportDirectory

I'll try to help when I get back tues night,, see the contact page for info on where I am
http://www.cjwsoft.com/contact/default.asp?Subject=CJWSoft+G eneral+Inquiry

Hi Chris

I've just recently purchased ASPBanner and have been testing out serving multiple Tradedoubler code using the IFRAME method. I have four types of banner on the same page refreshing every 15 seconds. (this will change on the live site) 

I've been leaving the IE page up for x hours and coming back to find between 1-3 of the banners has stopped and in place is an "internal error".

BannerZone=3&Refresh=15|40|800a0046|Permission_denied 80

I thought it may have been the SQL permissions from one of your other messages so I gave the banner user the DataReader and DataWriter permissions.

Its still happening and around the same time in the logs theres a couple of file not found errors.

BannerZone=2&Refresh=15|23|800a0035|File_not_found 80 - 80.65.240.159

BannerZone=4&Refresh=15|25|800a0035|File_not_found 80 - 80.65.240.159

BannerZone=1&Refresh=15|25|800a0035|File_not_found 80 - 80.65.240.159

Any ideas? I'm hoping its not the server as there is currently only 2 sites on it and this is pretty much the only traffic.

Thanks

Colin

The main root of your web site needs a "aspnet_client" folder for .NET apps like ASPProtect.NET to run.

If this isnt quite right one of two things can happen.

1.) You'll get a pop-up error like this.
'Unable to find script library WebUIValidation.js'

2.) The ASPProtect login screen will come up but just not let you log in.

This folder only goes in the root. Not in subfolders and subwebs.

If you dont have this folder in the root of your web.

Read this article to learn how to properly create the folder.
http://msdn.microsoft.com/library/default.asp?url=/library/e n-us/cpguide/html/cpconconfiguringaspnetapplicationforaspnet version.asp

If the app is installed on a hosted server you'll need to ask them to do that for you.

You can also try copying a the folder from your own machine after creating it the way the article above says.

or

here is a copy of my "aspnet_client" folder created under the latest framework at the time of this writing. v 1_1_4322

2004-11-03_134912_aspnet_client.zip

I am not sure if copying it in is as good as having created by the server as I haven't had time to really test all of that but it should work. Ultimately all this does is put some files .net needs in the web.

Sorry, you cannot, that is how it works and that is how it has to work for reasons I am not going to try to explain as it is pretty technical. (it works the same way even when not using paypal and using email authentication... nearly every registration system out there does it that way under an email authentication scenario or a PayPal IPN thing.)

Basically, if you are concerned about it you need to periodically manually check for accounts that were never activated and delete them. Maybe when I get some time some day I will make a little interface to help find those and clean them up at once.

I wonder if this could this be a FrontPage problem. I deleted the skins folder and re-ftp'd the original one that only contains default and Solid Black. I logged in and tried to change it back to default but it won't. I'm going to try making this folder a Frontpage subweb to see if that makes a difference.

Al

it's ok

one step at a time and at each step testing things.. then when you mess something up you can figure it out a lot easier

Upgrade from V6 to v7.x with an MSSQL SERVER DATABASE

1st of all, backup your existing ASPProtect files and database before performing this upgrade. Please be really careful while performing this upgrade. Version 7.x  is a highly advanced application compared to any previous versions. CJWSoft under no circumstances is responsible if you lose information or have website downtime.

BOTTOM LINE: (PERFORM THIS UPGRADE AT YOUR OWN RISK)

To do this upgrade you're going to need to have SQL Enterprise Manager and SQL Query Analyzer

That being said, on with the upgrade..

Open your SQL database in SQL Enterprise Manager

Regarding the following Tables

Rename "Users" to "ASPP_Users"
Rename "Groups" to "ASPP_Groups"

If you do not have a "Groups" table do not worry about it right now.

Now right click and DELETE the Config Table.
Yes, delete it..

Now, go into Design View for the "ASPP_Users" Table.

Rename the "Password" field to "Old_Password"
Be sure to spell it perfectly using the Underscore

If you have a "Groups" Field... leave it alone
If you do not have a "Groups" Field add one and make it a "nvarchar" field with a lengh of 255.

Now, we are going to add a few more new fields.

Add a field called "Redirection_URL" make it a "nvarchar" field with a lengh of 150.
Add a field called "PayPal_Subscriber_ID" make it a "nvarchar" field with a lengh of 100.
Add a field called "Newsletter" and make it a "bit" field
Add a field called "Password" and make it a "nvarchar" field with a lengh of 100.

Now close that window and save the changes..

Download these scripts.
2005-02-23_171110_aspprotect_v7_sql_upgrade_scripts.zip

Now open up SQL Query Analyzer
Connect to your SQL server.

Then load the script  "aspprotect_v7_config_table.sql" into the Query Analyzer.  Click the green play button at the top. If everything goes well the response should read something like this.

******************************************************
(1 row(s) affected)
******************************************************

Now, if you had a Groups Table your done with the database changes.

If you didnt have a groups table.

Then load the script  "aspprotect_v7_groups_table.sql" into the Query Analyzer.  Click the green play button at the top.

Now, go back to your database in Enterprise Manager and make sure all 3 tables are there and look ok. You might need to do a refresh or two to see them.

Now make sure an existing or new SQL user has (public / datareader / datawriter) permissions for all three tables. You reference this user in the asp code connection string so this user must be set up correctly. You may need your SQL server admins or hosting company to help you on this step as you may not have access to do this. You may not need to create a user and set permissions as the sql user you were logged in as to use query analyzer may by default get the correct permissions on anything you create.

Regardless, as you can see from this screenshot I have a SQL user called "aspprotectuser" and proceeded to set the permissions for that user. Under database access giving him (public,datareader, and datewriter permissions).


Now, you are done upgrading your SQL Server Database.

The existing passwords still have to be encrytped and moved from the "Old_Password" to the "Password" field

To that we have a special page we run in the application that will take care of that.

So, for now... go install the application, but using the database we just created.
Follow these instructions for the most part...
http://support.cjwsoft.com/forum/forum_posts.asp?TID=181& ; ;PN=1

When you get to the part where you finally get into the admin area and need to make an admin account you will notice that your existing user database is there but none of the users have passwords if you look at them in the edit screen.

That is normal. Simply do what the instructions say and create and admin account using a username that does not exist..

Then log off... then back in as that new admin account. If that works you are ready to convert the passwords.

This part is very easy.

You want to run a special page via the browser.

http://www.mysite.com/password_admin/convert_to_encrypted.asp

Replacing the part in blue with your website info.

Once you get the page running you will see a login prompt and one form field just like before with the "get_me_in.asp" page

You will need to paste the "PasswordEncryptionKey" value that you used in the "config_inc.asp" file in the form field and hit enter.

If all goes well you will see a page telling you to click here to encrypt the passwords and copy them over.

So do what it says... dont click more than once and wait.

Eventually it should say it is finished. So go log in to the admin area of the system using the new admin account.

Now edit some users but dont save... you want to see if the passwords are showing up. If they are the conversion worked. If you see nothing or a garbled mess it did not work and you made a mistake during this whole process.

If things went well backup and delete the conversion file below.

http://www.mysite.com/password_admin/convert_to_encrypted.asp

You do not need it anymore.

Once you are positive every thing is running smoothly and everyone's passwords are ok you can go in and delete the "Old_Password" field as well.



If things didnt go well.. try again from scratch and go slowly.
If they still dont go well get ahold of us for help.

We are here to help, but if you really want us to we can be hired to do the conversion.

Thanks!  Will try both.

Appreciate the support.

Using "Email Authentication" as a registration option you cannot do that. There is no possible way I know of to have a delay on the authentication email like that. Also that method is not intended to involve any sort of manual registration like what you are doing.

Because you want to review people manually you need to change to registration process to "manual" and then send the email out manually from the users screen after making a user active.

We want to insert a hyperlink i the mesage area when we e-mail users from the Password Admin area.  Is ther an easy way to insert the hyperlink so when the user gets the e-mail, they can just click on it and go the the page we want them to?

Thanks,

Andy

Chris.

After I had you install ASPProtect I added the ASP protecting code to the top of my home page:

<%@ LANGUAGE="VBSCRIPT" %>

<% CHECKFOR = "1" %>
<!--#INCLUDE FILE="../../check_user_inc.asp"-->

Then I made my index.html page my login page buy using the script "Login form on a non protected page" on that I changed <form method="POST" action="memberarea.asp"> to <form method="POST" action="home.html">. 

When I try to log on to that page I get en error page HTTP Error 405 - The HTTP verb used to access this page is not allowed. Internet Information Services (IIS). I checked with my hosting company GoDaddy.com and they informed me that due to the fact that they do not have ASPProtect instaled on there systems they can not support it.  In recent conversations you told me that you have customers that do use godaddy and you products. 

Can you please tell me what I can do to get this working?

Thank you for your time and help.

yeah.. thats an old graphic probably only seen in a few places.

it is not on the main site
http://www.cjwsoft.com/
or here
http://www.aspprotect.com/
or here
http://www.aspbanner.com/
or here
http://www.aspclassifieds.com/
or here
http://www.aspphotogallery.com/

but I am sure there are a couple of pages left over still using it like the aspvendor and asplistings pages.. etc    I am aware of it, just been too busy to go change them and I didn't consider it a big deal

2003 servers are NT based anyway

Access to some sections of the forums must be requested.
Please Click on the following link and read all of it carefully.

http://support.cjwsoft.com/

I am also getting the "Unspecified Error" message.  I just transferred my site to IIS 5.0 and I get that error now.  However it does not happen everytime.  I can click on a page and it opens fine and then I hit refresh in the browser and I get the "Unspecified Error" message.  What could be causing this?

I log all 404 errors on my site and since installing ASPBanner, I get a lot of the following error:

/aspbanner/edit_banner.asp?Banner_ID=11&User_ID=1 contains a broken link:

/aspbanner/right1.gif

ID changes and there are various missing links.  Some missing links include:

/aspbanner/drop2.gif
/aspbanner/left1.gif
/aspbanner/right2.gif
etc.

While not critical, these are filling up my error logs and it takes time for me to sort through them.

This has not been officially released yet, but it is ready.
Here is the overview...
http://www.aspprotect.com/demo3/paypal_signup2/overview.asp

And the Code for the IPN Subscription Pack is 30.00.
http://www.aspprotect.com/ipn_subscription_support_pack.asp

A few people are using it and say it works very well.

Like the IPN Single Purchase System it is a separate directory you copy into the web site. One change must be made to your database so it’s pretty easy to get working. 

Though I am not guaranteeing this you should be able to accept Single IPN payments and IPN Subscriptions at the same time without the two bothering each other. I haven’t tested it but one customer is doing it and said it is working fine. It just involves manually specifying the IPN URL for one of the systems so it overrides the default IPN URL on your paypal settings. (As each system needs its own IPN URL) Its easy to do… just a form field you would add to the subscription form. I already looked it up. See below. 

Specifying Your Notification URL

If you only need to receive your IPNs at a single URL, you can enter that URL in the Preferences section of your Profile. If you would like to receive payment notifications for different payments at different URLs (i.e. if you need to separate payments made to different websites you run), you can manually pass the IPN URL with each payment by including it in that payment’s HTML code. Use the notify_url field to pass this information. The notify_url for a specific payment will be saved, and any subsequent updates to that payment (e.g. cleared eCheck) will be sent to that notify_url. When you pass a notify_url in your HTML code, it will override any preferences you set in your Profile. 

Anyway.. the Code for the IPN Subscription Pack is 30.00.
http://www.aspprotect.com/ipn_subscription_support_pack.asp

yea.. it sounds like aspimage is not working right.

You wont get any errors..

I would suggest using some of aspimage's sample asp pages in your web and see if they do their thing. You need to be sure aspimage is working correctly under the ,ost simple of circumstances

Though ASPImage is the standard in ASP image resizing and has been around forever and it works very well. Their support is almost non-existant.. in 6 years they have never answered any email I have sent them. I have sent them 6 or so over the years and then just stopped trying. I bought a server bundle too way back then for like 300.00 or so when we had a company called gisco. You would think they could answer my emails. I think that guy just made a ton of asp components back in the day and then just took a seriously long vacation. Updated them a few times in between when he felt like it and making good money the whole time.. More power too him I guess. I'd love to be in his shoes when he sells an enterprise license for 3000.00. Maybe he isn't even around anymore and the someone he knows just kept the sales going. Who knows..

Anyway... it does a great job when ya get it working.

Personally this is how I install it and it works every time.
I like to put their dll in the system32 folder.
Register it.
Run their licensing prog to make it a full version if you paid for it yet.
Right click on the dll and give the "everyone" account modify permissions
Right click on the "windows/temp" folder and give it the same permissions

actually  I just went to it again and it was somewhat slow coming up this time..

perhaps you have some issues with the sql database.

it should be instant.. like this one I run on my server
http://banserver.powerasp.com/aspbanner/

I suppose it could also have something to do with sql server resources but its hard to say..

Well. fontpage publishing is evil. That you have found out.

Do not use it. It usually wont work right when running asp code locally and also at the server because of differences with the paths and virtual directory structure. etc etc etc

You can definetly use frontpage to connect to the web site live and drag and drop files into it/edit them... but the sooner you stop using the publishing feature the better off you will be.

Is there a simple way to upgrade from 7.x Lite to 7.x Full?  I was testing out the software and I just purchased it.  I have made some look and feel changes to the lite version (ie: login page), but no look and feel changes to the admin section.  Is there certian files that I can add to have the full version without shorting myself features or functionalbity? 

Thanks

Hi-

Thanks for the quick response to my previous posts.

This is my issue:

I have read over all the docs and installation instructions and can't find a way to do this:

my default page in my root dir will be a log in page which will take the user once his level is validated to a "home page". Is there a page in your examples that will perform the function of this log in page? or should I rename check_user_inc.asp as the default and change it's html output to make it look like my log in page?

I also looked within the code for check_user_inc.asp and did not see where to specify where the user will go once he signs in.

Your help is appreciated

Okay,  I deleted out the aspprotect folder and started over.  I also took out the dsn connection to the ecommerce database and deleted out the subweb that had it, I decided to use another provided where the database is resident on thier servers not mine.

I broke my txt file into groups and it's loading sort of.  The first 1000 users uploaded fine...the second said it timed out, but when I looked at the access database it showed 2000 people.   The login still times out and every page seems to load incredibly slow still.

I purchased 6.0 in Feb 05.  Is there an upgrade price to 7.0

I spent considerable time setting up 6.0 to work with my web site. From what I read in the forum, it sounds like I have to start over again to integrate the new version into our web site. I do not relish the thought of that, but I have to move to an email system with a valid MX record.

Will I be starting over from scratch with this upgrade?

Hello,

1.)

I dont really have any ideas about the japanese characters. I also don't have any ideas about changing settings in the database. Your going to have to do some research on all of that.

Perhaps try pasting the text into a text document 1st.. then copy/paste them into the application. Perhaps that will eliminate any unseen weird characters. I do it sometimes when pasting things from word to my html editors and it works great.


2.)

I dont/cant support custimization to the code but here are some tips to get you started.

edit "items_inc.asp" carefully with a text editor
(back it up before you begin so you can revert back)

change this anywhere you see it

?SORTBY=Name

to

?SORTBY=Name+Asc

or

?SORTBY=Name+Desc

Expiriment to see which gives you the desired sorting.
Do the same process for the price.
The + Sign just passes a "space" back to the page in the proper format if you are wondering.

3.)

The items for page setting is easy. Just go to the settings page when logged in as the admin. Edit this field.   "ResultPageSize"

ok, PM me some additional info so I can go look around.

I dont quite understand everything going on.

Let me know what to do exactly to be successful logging in and also...

Let me know what to do exactly to reproduce the issue and I will tell you what I think.

SQL Server Datareader Datawriter Permissions..

here is a screenshot that shows how to set datareader and datawriter permissions on a database using "SQL Enterprise Manager"

In this example we are making sure the aspbanneruser has those permissions on the aspbanner database in the SQL Server