Hello,

for an admin..
you view albums for a user.. make a new album... then click manage pictures

for a regular user you log in.. go to user user area.. create an album..then click on manage your albums

ya,

any variation of a site url is going to have its own set of application and session variables.. soy you have to be consistant with your navigation links

example (for anyone that comes across this thread)

http://www.examplesite.com/somepage.asp

is going to have a different set of application and session variables then

http://examplesite.com/somepage.asp

even though they are basically the same page

It should be released sometime late May 2004 or early June 2004 but no gurantees as I am pretty busy right now with some projects.

There will be upgrade instructions and it should be a fairly easy upgrade.

[/QUOTE]

Like I said no guarantee... I have a lot of things going on... it might not even be finished till the end of July... customers will always be able to get it for the difference in price

You have the version listed on the site when you purchassed it.
Version 3.0

I think you may be using old code where that was an issue... I am going to PM you the latest version..

to be safe upgrade all the ASP files except the dataconn_inc.asp files and your config_inc.asp files

"be real careful not to lose your current encryption keys in the "config_inc.asp" file or you will be in real trouble

You can use your existing database

First pass through, I don't see anything changed in the groups section of the check_user asp file. the logoff asp wasn't touched.

I noticed the demo online (on this site) only has pages protected with access levels; you say it works fine with groups also?

Humm, Did you change something in a bad way? Thats my guess.

I need more information on what is going on because by default it does not do that ?

The only possible way I can think of that could cause that is if you changed things around too much and the config_inc.asp file is getting run/included twice on that page your logging in to.

Also, when you sign in "where" ? What page ?

I believe what happened is we received the older copy of ASP Banner iwht our purchase of ASP Protect and were notified of a free update to download aspbanner_unlimited_v8.2_feb_26_2005.zip which we did, and that's the one i recently put on our site.

  Sounds from your reply that something technical is going on to the point where I will have to hire one of our Web consutants to dissect for us.  We'll try again and track our issues and send another request for information when we can show you a specific example of what is happening.  I'll be in touch.

I had both ASP Listings & Classified on the same website.  The categories seem to be getting mixed up. I removed ASP Classified but classfieds categories is still appearing in the student of ASP Listing.

How do I fix this?

Thanks

Hi,

Its just not enough information to go on. I need more details on what is going on. There are a lot of configuration settings in these applications. I really do not know what to make of that screen shot.

My 1st guess is that if you cannot delete a picture that the picture folder does not have delete permissions ??

I also need to mention that I am not sure what this has to do with ASPImage ?

Please Note : ASPProtect v7.x has a new feature called groups that is much more powerful than access levels. Access Levels were left in the product primarily for existing customers that upgrade to the new version so they do not need to make a lot of changes to their site if they were using Access Levels.


More On Access Levels

Again, Examples of managing Access Levels are provided in the "multiple_access_levels" folder included in the root of the Password System. Look at the source code of the ASP pages in that folder with a text editor to see the working code.

Access Levels and how they work can be re-coded to work in many different ways. However, you have to be a good ASP developer to make changes to it. Here is some information on how they work by default.

In the "check_user_inc.asp" that comes in the root of this system Access Levels work as follows.

Level 1 has Access to - Level 1
Level 2 has Access to - Level 1,2
Level 3 has Access to - Level 1,2,3
Level 4 has Access to - Level 1,2,3,4
Level 5 has Access to - Level 1,2,3,4,5
Level 6 has Access to - Level 1,2,3,4,5,6
Level 7 has Access to - Level 1,2,3,4,5,6,7
Level 8 has Access to - Level 1,2,3,4,5,6,7,8
ADMIN has Access to - Level 1,2,3,4,5,6,7,8,ADMIN

Here is some additional info..

If the access levels are too restrictive you can ignore them all together and create your own totally custom solutions.
Here is a quick rundown of some of the things you can do.

Ok... so if you want to be really specific about what each user can see and
can't .. here's an example of what you can do

Don't use the access levels before the include file..
Don't worry about what you set a user to in the admin area since the access levels won't be used.

Do something like this..

Every time a user logs in session variables are set that you can access at
any time.. thus allowing you to know who they are.

So you could do something like this...


<%@ LANGUAGE="VBSCRIPT" %>

<!--#INCLUDE FILE="check_user_inc.asp"-->

<%
If Session("USERNAME") = "bob1267" or Session("USERNAME") = "carl45" or Session("ADMIN") = "True" Then
Session("PASSWORDACCESS") = "Yes"
Else
Session("PASSWORDACCESS") = "No"
Response.Redirect(Request.ServerVariables("script_name"))
End If
%>

The following URL explains what Redirects are.
http://www.powerasp.com/content/code-snippets/redirects.asp

That would in effect create totally custom access levels.. but you would
have to do it manually for each user.

You can also do things like this after a person logs in

Show custom html to any specific user based on either their username or
access level ... like so

say there was a menu and a certain link should only show up to username
"paully67"

you could do something like this


<HTML>
<HEAD>
<TITLE></TITLE>
</HEAD>
<BODY>


<br>
<a href="main.asp">Home Page</a>
<%
If Session("USERNAME") = "paully67" Then
%>
<br>
<a href="paullys_page.asp">Pauls Stats Page</a>
<%
End If
%>
<br>
<a href="links.asp">Links Page</a>

</BODY>
</HTML>

Or you can show custom HTML or links based on Access Levels or any other info.

You can do just about anything with if-then statements and
using the built in vbscript functions..

Hopefully this info will help to give you some ideas...

Bottom line is you have to do some work within your site to make the Access Level system really come alive.

(Password_Email_Confirmation_Mod) for ASPProtect Version 7.x

This will change the basic registration pages so that the email address and password entered must be confirmed when signing up. This eliminates the auto generated password during signup.

Some may prefer it working this way.

Directions:
Back up your existing ASPProtect installation.

Copy the two new files into your "users" folder

"register.asp"
"add_new_account.asp"

2005-12-01_182201_Password_Email_Confirmation_Mod.zip

I am using ASPProtect's password program, which has been very successful, for managing over 1,500 military veterans' memberships at http://www.vspa.com.  What I am trying to do now is utilize the "Groups" code, as generated by the Admin page, to prevent members with expired accounts (and non-members) from accessing restricted "members only" .ASP pages they may have bookmarked, or found via web search. The code generated and used is as follows:

<%@ LANGUAGE="VBSCRIPT" %>
<!-- Begin ASPProtect Code -->
<!-- Groups with access to this page. ( * ADMIN * Member Current * Member Life * Officer/Staff * ) -->
<% GROUPACCESS = "10,12,14,19" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->
<!-- End ASPProtect Code -->

The above is placed over the <html><head> statements on the page.

When I am logged in the code works perfectly! When I log off and try the URL again, the page appears in its entirety but with a Login box for Username and Login Password at the top of the page. You may view the problem at: http://www.vspa.com/aspprotect/vspa-password-enter.asp .

What I would like to have happen is expired members and non-members would be sent (or Redirected) to a Login page. I do not want the Login password box to merely be inserted above the page that I am trying to keep them from visiting.

Don Poss,
VSPA Webmaster

Christopher,

Thanks for the reply. I think I've found my problem, but can't test until later in the evening as it is on a live site.

Darrell

in Control_pic.asp is there way to wrap the description field so that it doesn't go outside the table.

Thanks

Hello -

Believe it or not I finally can access the photogallery. You were right Chris regarding the unzipping of the files.

Now onto the next challenge! I have set up three categories and proceeded to create a test album. I uploaded a couple of pictures (yeah that worked!!!) but the album does not show up on the default.asp page under the category.

Please advise -
Rhona (rookie)

Honestly cannot comment much about v7 since it was just installed on a new server.  We have been running 5.03 for years so I'm looking forward to the new features in v7.

Lance

Okay,  I deleted out the aspprotect folder and started over.  I also took out the dsn connection to the ecommerce database and deleted out the subweb that had it, I decided to use another provided where the database is resident on thier servers not mine.

I broke my txt file into groups and it's loading sort of.  The first 1000 users uploaded fine...the second said it timed out, but when I looked at the access database it showed 2000 people.   The login still times out and every page seems to load incredibly slow still.

I purchased the ASPGallery Pro last week and still cannot get it running. When I enter www.vickerylightning.com/aspgallery/dataconn_inc.asp on the screen it says "Not a valid bookmark"

Below is the connection string. My hosting company uses server map paths:

'Create database connection

'Create a connection odject
Set adoCon = Server.CreateObject("ADODB.Connection")

'Database connection info and driver
'strCon = "DRIVER={Microsoft Access Driver (*.mdb)}; DBQ=" & Server.MapPath("aspgallery_access2002.mdb")

'Alternative drivers faster than the generic access one above
'strCon = "Provider=Microsoft.Jet.OLEDB.3.51; Data Source=" & Server.MapPath("aspgallery_access97.mdb") 'This one is if you use Access 97
'strCon = "Provider=Microsoft.Jet.OLEDB.4.0; Data Source=" & Server.MapPath("aspgallery_access2000.mdb") 'This one is for Access 2000/2002
GalleryConnectionString = "Provider=Microsoft.Jet.OLEDB.4.0; Jet OLEDB:Database Password=temp; Data Source=\\NAWINFS04\home\users\web\b2623\rh.vickery2004\aspga llery\aspgallery_access2002.mdb; "
GalleryDatabaseType = "MSACCESS"

adoCon.ConnectionString = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source="&Server.MapPath ("\aspgallery\aspgallery_access2002.mdb") & ";"

Definitely need some assistance!

Rhona (rookie asp) -

The album ID thing is completely normal and by design. Once an ID in the database is used it can not be used again. That is how autonumber fields in a database work.

As far as not being able to delete images... Are you by chance using ASP.NET to show dynamic thumbnails... Because if you are you must turn that feature off and wait 20 minutes or so (maybe more) before you will be able to delete any of the images. It is because the current version of the ASP.NET script used to make the thumbnails locks the images on the server temporarily anytime it creates a thumbnail.

It is a known issue... and there is no fix at the moment other than what I told you above.

               Also, I’ve been trying to modify the code to adapt it for our application -- by removing fields that we do not need such as address, city, state, phone, but I am having trouble getting visual studio to compile.  It could be due to the fact that the rest of the project is in C#.  Or it could be due to some other factor in ASP Protect.

pretty clever...

If anyone is interested in what the Mod function actually does this article explains it nicely. They even use it for the same purpose in the examples.

http://www.asp101.com/articles/steven/mod/default.asp

yes, PM me the encryption and cookie keys if you don't mind.
I can add it to my combinations that cause trouble.

it might help me to figure this problem out.

More Info on Simple File Sharing

http://www.practicallynetworked.com/sharing/xp/filesharing.h tm

http://www.theeldergeek.com/quick_guide_to_simple_file_shari ng.htm

http://support.microsoft.com/default.aspx?scid=kb;en-us;3040 40

Don't want to install the application ? Having trouble doing it ? Don't think you can ? No problem, have us install it for you. PLEASE READ ALL OF THIS Installation service is generally available Mon - Fri during the hours of 10 am - 7 pm EST. We may very well be around to do installs at other times but we do not guarantee that. To do an install we generally need FrontPage Explorer or FTP access to your site. We also need a way to set permissions on any necessary directories, etc etc. To do a SQL Server install we need to access your SQL server via Enterprise Manager. Some installs may require access to other things not mentioned. The server must be a properly set up NT/2000/2003 server running IIS 4-6 for ASP 3.0 applications. (with support for ASP scripts and database connectivity.) Parent Paths must be enabled on the server. Please Note: These ASP scripts do not run under Chillisoft ASP. That means they do not run under Unix, Linux, Apache, etc etc. We do not install our applications on free ASP Hosting solutions. Why, because they are more trouble than they are worth. Free hosts like that are usually zero help if we need something changed. There is a reason they are free. We install the software in it's base configuration. We make sure it is running correctly. If you break the installation you will have to pay to have it fixed. We do not integrate it with your existing site or edit any of your existing web content. That is up to you. Installation fees are non refundable as is the digital source code we sell. When you purchase anything from us you agree to this. We do not do installs for IPNFulfill and Color Sequence Protection as they are simple scripts and do not even use a database.. We also do not install the IPN Support Pack as it is just a folder you copy into your web and some configuration files that you must decide how to configure based on your needs and your PayPal account info.

Any CJWSoft ASP 3.0 application (Access Database Installation)	25.00
Any CJWSoft ASP 3.0 application (SQL Database Installation)	40.00

Contact us if you have any questions.

If you are using version 6 CDOSYS is not supported. That is one reason why version 7 came out. If you want to rewrite the code to work with CDOSYS in version 6 that is something you need to sort out on your own as I do not support custimization to the code.

Hi Chris,

Alright.  We figured out how to work with both C# and VB, by creating a separate VB web project in VStudio, and then passing the aspprotectnet.dll to the C# project.

Ok.  I have another question:

How can our code determine the identity and user_id of the currently logged in user:

Is it Session["User_ID"].ToString() and Session["Username"].ToString()?

thank you

yes. what you are talking about has to do with norton ad blocking software.. it blocks images or paths that have the word "ad" in them.. and you see red x's where images should be on web sites.. usually

it is different then what this thread initially mentions which has to do with a code/server issue with the application variables.