Yup everything looks ok - but why no error?

This just gets better - now the email a friend link says sent successfully and doesn't send out - what the heck...

What would cause it to 'think' it is doing the task yet still fail?

I am attempting to have the page dedirect from the group, as some of my users are part of different and multiple groups (they are not structured in access levels, b/c they cannot be part of multiple levels(?)).  So I think I need to redirect by group.  I am having trouble having this work correctly.

-j

I just did a quick google search... found a ton of info on how to find the setting. Here is one...

These are directions for IIS6 but the process is similar for IIS4-5

1. Click Start, click Administrative Tools, and then click Internet Information Services (IIS) Manager.
2. Double-click your computer name in the left pane, and then double-click Web Sites.
3. Locate the Web site and directory that houses the ASP application.
4. Right-click the application site or directory, and then click Properties.
5. Select Home Directory, and then click Configuration.
6. Click Options, and then click to select the Enable Parent Paths check box.
7. Click OK two times.

I am successfully using ASP protect on our site. I have one question:

The file Check_user_inc.asp looks a bit bland as I can't seem to use the sites Dreamweaver template. If I apply a template to this page, it is duplicated on other pages with this template.

How can I apply a template to this page?

Thanks

Clark

I recently upgraded my ASPclassifieds from MS Access to SQL.  The application launches, I can browse existing catagories, etc. but when I try clicking on the login, guestbook, register or accessing the classifieds_admin,  I get the HTTP 500 - Internal server error.  Guessing this must be a folder or file permission issue?  Have tried changing IUSR permissions but nothing helps.

Please advise.
Thanks, lancem

I have imported like 50,000 users into an access database when testing... it took like 4-5 minutes but worked..

course it really all depends on the setup how many you can get away with

something must still be wrong

have you tried just importing 1 or 2 users for troubleshooting sake ?

I would also recommend that after any timeout you reboot the server or at the very least do an "iisreset" to get things back to normal

I cleaned up the code as you suggested, and I still can't get the images to display without the whitespace around it.

How do I download the ASP version?  I'll give it a try.

Thanks for your help,
JDooley

I used Dreamweaver4 to make my site is there anything I can do to make it work?

I just took a look and that is definetly what happened.
It has nothing to do with the registration process as far as I can see.

Just running this page triggers it and I know it does not do that the way it comes.
http://www.myvirtualtutor.com/aspprotect/users/user_area.asp

Please back up what you changed and put the user area back the way it came..

If error still happens then I can help you.. It it works fine with the default files from the zip archive then you messed something up in the code.

You have to be really careful when working with ASP code.

Also: just in case you did this. " you should not be password protecting any files in the users area that are already there " the users area does it's own thing and there is no reason to be doing anything like that to the files that are already there. You can do whatever you like to files you add on your own.

not really, aside from looking in paypal and manually adding each one for each user...

how many users are we talking about anyway ?

and were any of the users new sign ups from scratch because if they were and that field didnt get populated that is weird?

ultimately aspprotect does not use that field. I was just storing it for the sake of storing it... so its not a big deal but I would still like to figure out what is going on

removing the expiration dates from paypal subscripbers will be enough to fix the issue your having about them getting the expiration notifications

MySQL Database Setup

Use of MySQL is 100% unsupported as you can see from the site.
http://www.aspbanner.com/mysql.htm

Even still I recently had an encouter with an extremely Jerky person (read the thread above for more on that) and because of him I am adding this tutorial showing one way to set things up on a windows server using the official MySQL tools available.

Let me just say as well that there are 100's of 3rd party tools to work with MySQL databases and many ways to create the database and apply the database creation script. In the past it had to be done via the command line, but now there are a lot of visual tools you can do it with. Furthermore all hosting companies set MySQL up differently and give you access to varius interfaces to manage it which are all different, and that is primarily why I do not support it. How the hell could I support all those different interfaces many of which are totally custom?

The fact is 99% of the people that purchased ASPBanner to use with MySQL have done so without issue and love how it runs. Regardless here is how I set up a working MySQL database on a windows server proving it does indeed run with a MySQL database.

1st of all if you are setting up the server you need to download some things from http://www.mysql.com/ 
(btw: you local developers can install this on XP Pro as well if you like.)

For this article we are going to download the current non beta windows version of MySQL which is 5.0. ALso known as the Windows Essentials (x86) download. It's about 17 meg.

Because ASPBanner uses the MyODBC drivers (now called Connector/ODBC) to connect to the MySQL database you need to download those as well. (Our site flat out says this is required for MySQL use)

So I download those from here. http://dev.mysql.com/downloads/connector/odbc/3.51.html
Version 3.51 has been the current version for a couple years now.
You want the windows driver install which is about 2 meg.

The two downloads should look like this.



Now, on the webserver you run the version 5 setup (mysql-essential-5.0.19-win32.msi) I will guide you through it step by setp.



Hit Next



I am going to choose typical for the sake of this article.

Hit Next



Hit Next



Wait for a bit



I skipped this part.



Choose to configure the MySQL Now

Hit Finish

Hit Next

I am going to choose Detailed Configuration



Since I am on a development machine for this install I am going to choose Developer Machine. For a Real Server choose one of the server options.



For this article I am going to choose Multifunctional Database: You may want to pick one of the other options. That is up to you. ASPBanner will work under any of the scenarios.



I am going to leave the location at its default

Hit Next



Since this is a development machine these options are fine.

Hit Next



These options are fine as well.

Hit Next



Standard is fine for my development machine.

Hit Next



I am going to choose both of these options. The 1st one is Important and should be enabled on a real server so MySQL always runs. The 2nd is not so important.

Hit Next



Set the "root" password and do not forget it. You will need it to manage your MySQL server. I do not advise creating an anonymous account unless it is a development server and you just do not care. Whether you enable root access from remote machines or not is up to you so do some research on that. For this articles needs I am not choosing it.

Hit Next



Hit Execute and wait



If all goes well you will see this. (I actually got an error message about not being able to connect... I went to to Administrative tools/services and restarted the MySQL service and hit retry which cured that... it probably only did this to me since I have installed this before.. new installs probably will not have any trouble)

Hit Finish

Your done.. You just installed the MySQL Server (TIP: its usally a good idea to reboot and make sure the MySQL servce is running by default)

Now, moving on..

Lets install the MyODBC drivers.. (now called Connector/ODBC)

This one is a bit of a no-brainer so I am not going to go into detail.
Just run (mysql-connector-odbc-3.51.12-win32.msi) and run through all the defaults until it is done.. Choose typical when that comes up.

Your done setting up MyODBC on the server. If its not your server I guess you don't need to worry about installing all of this as its your hosts job to do that.

Hi Chris,

I tried changing using Notepad in the config_inc.asp

from:

If  Application("SERVER_SOFTWARE") = "" Then
 Application("SERVER_SOFTWARE") = Request.ServerVariables("SERVER_SOFTWARE")
End If

To

Application("SERVER_SOFTWARE") = "iis/6"

and the albums still do not show up under the categories

Rhona (rookie)

the following error message appears, but only when attempting to log off. all other parts of the program seem to be working.

[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0xa04 Thread 0xa38 DBC 0x21ff024 Jet'.

ok, here is what is going on

you are password protecting an ".asp" page that requires querystring info to run correctly   (example - "somepage.asp?ID=3"")

that is something I never intended anyone to do.. while it does handle and repass the querystring info along during successful login it does not re-pass that info during a failed login as you have found out

this is all by design.. the only reason the system re-passes the querystring info at all is because I wanted to make it smart for the sake of the remember me/cookie feature.. so if someone was using that and bookmarked a page deep in your site with querstring info...then when they went back to that bookmark they would get authenticated and still see the page as intended with the querystring info in tact

it was a nice feature never intended to handle any situations other than what I just described...

now...
notice the url in the browser after failing a login.. then logging in successfully.. it is missing the querystring info

that more than anything is what is going on..  browser caching can cause some confusion when dealing with this because the browser likes to return you to the page minus the querstring info... when that happens a simple browser refresh at that time may very well solve the problem and then you see the page you are supposed to see...

To avoid all of this...

One solution to this is to always start people logging in to an ".asp" page that has no querystring info. That way this won't happen. Once they are logged in you can then offer them links to the pages they need to go to. (you of course still want to password protect those pages)

Another solution is to log them into a page with no querystring info and then do a response.redirect to the page with quersytring info.. thus accomplishing the same thing but without the possibility of the issue because of a failed login.

Another solutions is to do checks in your asp page for missing querstring info.. and if it isn't there do something about it like send them somewhere else.. or display a message about there being an error... etc etc

So,basically you don't want to tell people to login into such and such page with querstring info... and providing a username and password..... You can do it but like you found out it can cause an error if they mess up logging in the 1st time. The system just was not designed to handle that. There are complex reasons for that involving security that would just take me too long to explain.

I hope this makes some sense to you.. it is very hard to try and explain

I downloaded v7 3/7/2005

I entered a password that was supposed to be all caps with only first letter caps. 

it is odd, if I go to other user and enter wrong password that does not come up.  it apprpriately goes to a screen that says Access Denied.

thx

No luck...this is the message

Return To Import / Export Screen.

Active Server Pages error 'ASP 0113'

Script timed out

/members/aspprotect/password_admin/upload_post.asp

The maximum amount of time for a script to execute was exceeded. You can change this limit by specifying a new value for the property Server.ScriptTimeout or by changing the value in the IIS administration tools.

Christopher,

I can empathize. It can be a real pain to stablize a server and fend off hack attacks.

As for beta testing, I was referring to once you get to the point where you're ready to release it to the public whether it's this month, next month, etc.

Good Luck!

Al

- I am using the original files that came with the software.
- The software ads items to the database flawlessly.
- ASPImage works great.

- When I try to remove an ad or an image it says it's been removed.
- The ad does not show up on the site anymore.
- BUT, when looking at the sql database the ad is still listed there.

Why is the software not deleting the columns from the database and the images from folder?

Note: My other tables for other projects, in the database, allow me to delete them.

Hello,

Unfortuantely I can not help you much regarding the javascript because I am a server side code kinda guy. Client side javascript just isn't my thing. That was free javascript code that I used for that function. I really do not know enough about editing client javascript. Sounds like you might though.

Style 1 is really a relic left over from the standard version. I just left it in in case someone wanted to use it. Like I said because it is javascript making it do more than it does is tricky (at least for me)

Now,, for actually getting description code. The thing to do is check out how that all works in the pic_window.asp file which is what style 2 two uses. Bascially descriptions for an particular album get stored in one text file. We read that test file. Put the lines into an array. Then display the info which gets run through a functions to convert some special characters used when saving back to normal.

I tried to look at your site but it woulnt load for some reason.

If you can would you do it for a price as a mod or will this be added to the new version.

Hello -

Believe it or not I finally can access the photogallery. You were right Chris regarding the unzipping of the files.

Now onto the next challenge! I have set up three categories and proceeded to create a test album. I uploaded a couple of pictures (yeah that worked!!!) but the album does not show up on the default.asp page under the category.

Please advise -
Rhona (rookie)

There was nothing wrong with the server configuration. It turned out that the problem was that I disabled the email notification of new user registrations that I continually receive. That appears to disable the authorization email to new users as well.

One other issue. It appears that AOL email addressee's are not getting the authorization email. Does AOL have any blocks to CDONT generated emails?

Sounds cool.. post info when you get it sorted out

thx

hopefully someday I'll get the new version finished.. I just never seem to have time. Lately ASPProtect takes up all my time and now aspclassifieds seems to be in need of a new version more so than asp photo gallery

Hi Chris

I've just recently purchased ASPBanner and have been testing out serving multiple Tradedoubler code using the IFRAME method. I have four types of banner on the same page refreshing every 15 seconds. (this will change on the live site) 

I've been leaving the IE page up for x hours and coming back to find between 1-3 of the banners has stopped and in place is an "internal error".

BannerZone=3&Refresh=15|40|800a0046|Permission_denied 80

I thought it may have been the SQL permissions from one of your other messages so I gave the banner user the DataReader and DataWriter permissions.

Its still happening and around the same time in the logs theres a couple of file not found errors.

BannerZone=2&Refresh=15|23|800a0035|File_not_found 80 - 80.65.240.159

BannerZone=4&Refresh=15|25|800a0035|File_not_found 80 - 80.65.240.159

BannerZone=1&Refresh=15|25|800a0035|File_not_found 80 - 80.65.240.159

Any ideas? I'm hoping its not the server as there is currently only 2 sites on it and this is pretty much the only traffic.

Thanks

Colin

I would look on the pictures folder on the server and see what is there for pictures. Also, when you see a broken X on the site right click and see where it is trying to get the picture from and what the pictures name should be.

I would also be sure to clear out your temporary internet files in IE. clost and restart all browsers..

maybe show me the site ? so I can see this happening ?

OK.. I went with using ASPEMAIL.  The above did not seem to work.  No worries though, where there is a will (with options) there is a way.

The count is in the album area where the small pictures and description of album.   Viewed 1 time(s)  This count never changes.

Thanks

 John