You are right, there are NO entries in the "PayPal_Subscriber_ID" field at all. Any way of fixing this?

the reason being is because when I do installs I do not touch any of your existing content. I only install the base application and make sure everything in it working correctly and also that the example protected pages are working. I do not integrate it with your existing site or edit any of your existing web content. That is up to you

sorry about that, but it would be way too time consuming and editing people's existing pages is a good way to cause a lot of headaches for me and the customer if something goes wrong. Not only that but everyone uses the system differently and it wouldnt make sense for me to be the one doing that based on access levels, groups.. etc etc  which will all be custom to how you want things set up.

more on installation policies here.
http://www.cjwsoft.com/installation_service.asp

User Information

After a user logs in there are variables that you can always access.
They can be used to check various things or to display information
dynamically based on who has logged into the system.

   Session("PasswordAccess")
   Session("Access_Level")
   Session("Admin")
   Session("Active")
   Session("Expiration_Date")
   Session("User_ID")
   Session("Groups")
   Session("Redirection_URL")
   Session("Password")
   Session("Username")
   Session("First_Name")
   Session("Last_Name")
   Session("Company_Name")
   Session("Email")
   Session("Address")
   Session("City")
   Session("State_Province")
   Session("Zipcode_Postal_Code")
   Session("Phone")
   Session("Custom1")
   Session("Custom2")
   Session("Custom3")
   Session("Custom4")
   Session("Custom5")
   Session("Custom6")

You can display them on a page at any time using Response.Write like so

<% Response.Write(Session("FIRST_NAME")) %>

or like this

<% = Session("LAST_NAME") %>

Chris -

Sorry, I am looking at your code on view_item.asp and I have noticed that you are calling 3 variable; start_date, end_date, and image_url that do not exist in the databases that you provided.  Do I have the updated package for ASPVendor?

The main users screen... the 1st screen you see when you go to the admin area..  where you email an individual user..

The settings I am referring to being the various emailing settings on the settings screen, The settings you showed me.

As for emailing via a remote server over dsl. It may not be working because the ISP's block the port (25) to stop people from running email servers over their dsl.

Your POP3 works because POP3 uses port 110.

If you want to send emails from your local server on your dsl you should probably install the SMTP service of IIS if you have not and send emails using that with CDOSYS. Either that or get a commerical DSL account with a static IP that allows for running email servers.

Christopher,

Thanks for the reply. I think I've found my problem, but can't test until later in the evening as it is on a live site.

Darrell

Is there a way to set various members to upload a limit of photos. So, one member can only upload 5 photos in 1 album and another can upload 30 photos in 2 albums. Even if you just set a permission for the number of uploads for each member.

Thank you

Glad it is working.. for anyone reading this the customer bascially did this
http://support.cjwsoft.com/forum/forum_posts.asp?TID=36& PN=1

That being said asp photo gallery actually has a few more places that send email that you going to need to modify as well. Off hand the reply to album, admin massemail, admin send email,and postcard features come to mind possibly as 3 of them.

using a multiple file search and replace utility like ReplaceEm would be the easy way to do all of this in one step and find all the instances

http://www.orbit.org/replace/

Disallowed Parent Path

The Include file '../dataconn_inc.asp' cannot contain '..' to indicate the parent directory. 

When you get an error like this it is because parent paths are disabled on the web server. This is a setting in the IIS console for your website.

If it is not enabled on you server you will have to ask your host to enable parent paths for your website.

This is what the settings screen looks like on an XP Machine

Additional Information:

It is enabled by default on IIS4-IIS5 but in IIS6 it is disabled by default.
It is a minor security risk to have enabled and some hosts can be difficult about setting it.

Truth is, if your hosting ASP for customers you need to enable this setting if the customer requests it. Especially since 90% of the ASP applications out there require the setting.

Hosting companies should if they are serious about hosting ASP.


If they won't your only option is to go through all the code and convert the file includes to virtual includes.

http://www.powerasp.com/content/code-snippets/includes.asp

The trouble with virtual includes is they are different depending on the layout of your website. (that's why web application developers generally don't use them)

Basically if you are in a sub domain the path for the virtual include is going to be different then if you were in the root.. etc etc

Also.. someone developing on a local machine would need totally different virtual includes on the development server than they would on the live server. Server Side includes are processed before ASP so there is no way to make them SMART, so to speak. Server Side includes are hardcoded and that's that.

In my opinion virtual includes are pretty useless for commercial web based applications...  Since you don't know where the customers plan to install the apps.
And YES there are some tricks when designing the applications that make it less of an issue but they are not perfect solutions.

For example...

The virtual include below would work if the application or code was installed in the root
<!--#include virtual = /somefile.asp"-->

But if the application or code was installed in a directory called "somedirectory" the virtual include directive would need to look like this

<!--#include virtual = "/somedirectory/somefile.asp"-->

[QUOTE=spider]At the bottom of my "users" list page, it asks the question "number of users displayed per page"?  After hitting a larger number than the default of 1-25, it increases the number of users per page to that number.  But as soon as I leave that page, it goes back to the default.  Any thoughts?[/QUOTE]

That is how it is supposed to work. It is not supposed to remember that info after you leave. If you want it to always start at some default number simply copy the URL info after picking a number. You'll see the querystrings that tell the page what to do in the address field of your browser. Take that entire URL and  edit the button in the admin area to link to that. The links for the buttons are in the "header_inc.asp" file and you should edit that file with a text editor.

That's the easy non technical way to set a default on the users page and that applies to anything including doing a sort or whatever.

example...

you might change this

<a href="default.asp"><img src="../images/users.gif" border="0" alt="Users"></a>

to something like this

<a href="http://www.yoursite.com /aspprotect/password_admin/default.asp?SORTBY=Email+DESC& ;MyPageSize=500="><img src="../images/users.gif" border="0" alt="Users"></a>

Hi,

You see, an include file is no different then a link to an image or graphic. The path to the include file must of course be valid. That file isn't in the same directory as that page so you get an error.

You simply need to make the call to the include file valid.

See my article on server side includes.
http://www.powerasp.com/content/code-snippets/includes.asp

You should also look at some of the provided example pages and see how the paths to the include files are done.

You can also use a virtual include if you figure out the page for that. See my article for the difference between a file include and a virtual include.

The code generator in the admin area shows examples of both but depending on your site structure the paths may need to be slightly edited.

Server Side Includes are a fundamental part of using ASP and they are used a lot. Once you understand how include files are used you will think it is the simplest thing.


More articles on server side includes

http://www.w3schools.com/asp/asp_incfiles.asp

http://www.4guysfromrolla.com/webtech/faq/Beginner/faq6.shtm l

http://www.minwar.com/24

Hi,

That is not enough to go on. I need details in order to help.

when I go to that url is seems fairly fast and somewhat normal.. even when I try to log in it pops right back up asking for login info again..

I would check to make sure you are not running anything that might be effecting your web browsing.. software firewalls.. ad blockers.. script blockers... norton internet security.. zone alarm... anything like that

they can all effect a lot of things regarding how web browsers act.

sure (XP PRO), see my article on that

http://www.powerasp.com/content/new/windows_xp_pro_and_permi ssions.asp

Okay Chris, I wold like to get rid of the encryption then if it's not too much trouble.

I have no option of running the production server against an ms access db, since the db needs to be online and accessible from another system.

Please be aware folks..

This file is not provided by CJWSoft. Though this may work very well use of it is not supported in any way. We have not tested it.

This user is not using the option pack so this file will not be compatible with anyone using that because it does not have support for groups and some of the other new features.

Regardless..we appretiate users sharing ideas and solutions that they have come up with.

Ok, so I checked to see if ASP is running on the server and it is.  then I added code to the top of a page and this is what i can see when 'view Source' on the web browser:

<%@ LANGUAGE="VBSCRIPT" %>

<!-- Begin ASPProtect Code -->
<!-- Groups with access to this page. ( * Admins * ) -->
<% GROUPACCESS = "4" %>
<! #INCLUDE FILE="check_user_inc.asp">
<!-- End ASPProtect Code -->

<html>
<head>
<title>TeamManagers</title>

Yet I get no challenage for a password and no error message!

i downloaded the latest version. i also downloaded the sql script provided and ran in sql query analyser to create the tables.

After that i ran a special page to intially get into the system,

then setup a new user, then make them an admin,

and after that i logged out and again when i try to login iam not able to login.  When i check the ASpp_User table I noticed that the values in the fields "Login_limit" and "Active" in the ASPP_Users table in the SQL changed to NULL and 0. But if the value are Nulls or 0 it means it's not active and it's not allowing me to login.

Pls advice

I made the changes like you suggested, but now the page just times out before even loading. 

<%
ConnectionString = "DBQ=D:\clients\rklarman\DrWeisbergUsers.mdb;Driver={Microso ft Access Driver (*.mdb)}"
DatabaseType = "MSACCESS"
%>

That bit about zones makes perfect sense and seems surpassingly simple for me to integrate due to our categories and page contents being based on the same if/then functionality.

Regarding the user, I guess you mean that I could simply recreate a limited admin interface for users based on the interface you have included for me, is that correct? I realize how subjective the question is, but do you think that this would be a bad idea?

I'm leaning toward your software here. I have a budget that could easily cover a variety of programs, but the UI for advertisers at banmanpro, for example, seems far too complicated for my users. Also, banmanpro doesn't have supporting compatible softare I am interested in, such as your classifieds software.

I guess I am trying to buy a good shell from which I can do my own customization and coding, and into which I can integrate future additions such as your classified ads. Does this seem like the right place to be?

Thanks much for your time!

you dont want to use the virtual smtp virtual server method... you want to use a real remote email server with valid MX records..

ultimately though after all that is going is it is out of the hands of the asp code and it becomes issues other then the code sending the email... regarding to whether or not emails get blocked by certain organizations

For example:
I have many aol users sign up for various systems I have running without issue. I use CDOSYS with my own server mail.cjwsoft.com which has proper MX records set up.

I would also try to determine the difference between blocking and spam/junk email filtering. It is impoirtant to truly know what is going on.
Sometimes adding more information to the body of the emails going out will eliminate the junk mail filters from gettings the emails.

Then you have the various open relay lists that places like AOL use. If your email server or IP sending the email is on those lists for spamming you do not stand a chance. That is all out of the hands of the ASP code.

I'll send you something..

You can also try setting asphttp's user agent property to some browser version like in this example. It might stop that info from showing up when it fetches a page from the server.

<%
Dim BanObj1Http
Set BanObj1Http = Server.CreateObject("AspHTTP.Conn")
BanObj1Http.UserAgent = "Mozilla Compatible (MS IE 3.01 WinNT)"
BanObj1Http.Url = " http://banserver.powerasp.com/aspbanner/aspbanner_inc.asp?Ba nnerZone=1"
Response.Write BanObj1Http.GetURL
set BanObj1Http = nothing
%>

Also... I dont know if these values below will work but I got them from looking at my nt logs.

Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1)

Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0)

And here is more info on the asphttp component and it's settings.
http://www.serverobjects.com/comp/asphttp3.htm

Chris,

I've given the IUSR account modify access for the aspprotect folder.

In the ODBC manager module on the webserver I've taken out the aspprotect access driver option.

The dataconn_inc.asp line reads as

ConnectionString = "DBQ=D:\missourirealtor.org\members\aspprotect\data\database \ASPProtect_access2002.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp"

Now this should make it DNS-less correct? with the permissions set properly?

I've also taken out the password on the access database.

The original database of users I had was an access database from a different program called spooky login.  I exported them into a tab delimited file and changed the column headings to match those in aspprotect exactly.  Actually access would not let me import them in the databases without them being exact.

I imported that information directly using access's import options.  I tried the import/export manager in aspprotect but kept timing out as well.

IMPORTANT UPDATE - READ THIS
http://support.cjwsoft.com/forum/forum_posts.asp?TID=205& ;PN=1

The IPN Support Pack which is built in to ASPProtect 7 contains all the pre-built scripts you need to implement PayPal IPN with ASPProtect. IPN stands for (Instant Payment Notification). It allows you to set up scripts on your server so whenever a PayPal web accept order is processed the PayPal server sends info to your server regarding the transaction and vice versa. This is a fully automated process and allows you to charge users for access by the month or however long you like.

This Support Pack basically gives you an additional signup and registration directory "paypal_signup" and it should not interfere with any changes or customizations you have made to your ASPProtect setup in general. New users can register in this directory and pay for membership at the same time. Existing users whether active or expired can be sent to this directory where they can lookup their account and buy additional membership time online. You can also assign various Access and Group Levels during signup and you can set up various prices for various amounts of time as well. This is a real-time setup for the most part. As soon as a user pays via PayPal your system is updated and they will have access.

To use this all you need to do in ASPProtect 7 is enter your PayPal account name into the settings screen. It will be an email address. You'll need a business or premier account with PayPal and you will need log into your PayPal account and turn on IPN in you profile. They make you enter a default IPN URL. We do not use that so if you already have something there leave it there. If you dont have something there you can type in any the full url to any page on your server. It's probably best to send it to an empty ".asp" page or something.

The 1st value is the amount of days.
The 2nd value is the price for the amount of days.
The 3rd value is the access level you want to user assigned to.
The 4th option is the groups you want the user assigned to. (see PayPal subscription thread for examples of specifying group info)

Now, the label for the option in (blue) can say whatever you like.

Hi,

1. Two months ago, we have set up to use the Subscription services exclusively for all new members and renews. and removed the regular payment service, a carry-over from v6.
2. Many from the "pre-subscription" service have yet to expire, thus have a populated expiry field.
3. With a 10 month bridge before we get all the members onto the Subscription service the "Send email to users that are soon to expire."
is used to remind these.
3. When members RENEW using the subscription service, the Expiry Field is not Nulled and they become targets for future reminders although they have renewed as Subscribers.

XYZ signed up on Nov. 05 2004, we send him a reminder in Oct 2005 and he renews as a SUBSCRIBER. His expiry date field is not nulled and he will keep getting notices although he has paid for another year.

Hope this is clearer... Thanks

Hello,

I have ASPprotect 7 installed on my remote server.  I am able to go to the examples/default.asp page and login in without any difficulties.  If I copy the code from that page and paste it in a new page called the same thing but in a different folder, I get this error;  (Keep in mind that this is essentially the same exact page in a different location of the website)

Error Type:
Active Server Pages, ASP 0126 (0x80004005)
The include file '../../check_user_inc.asp' was not found.
/aspprotect/Pages/default.asp, line 3

I get the same error if I paste the "protection code" I have generated into the top of a current (.asp) page in my site.

Basically, the only pages that work are the ones that came with the program as examples.  Thats great, but now I need to make it work for my pages.  Any thoughts?

SQL Database Creation (NEW INSTALL)

If you are creating a new database do so using SQL enterprise manager.
Create a new database called whatever you like and keep all the default settings. If using an existing sql database skip that step.

Now open up SQL Query Analyzer

unzip the following sql script and open it in query analyser.
2005-02-20_132116_aspprotect_v7_sql_script.zip

VERY IMPORTANT
On the drop down box at the top right make sure your intended database is selected. Otherwise your changes may effect the wrong database in your SQL server.

Then load the script  into the Query Analyzer.  Click the green play button at the top. If everything goes well the response should read something like this.

******************************************************
(1 row(s) affected)
******************************************************

If so the tables have been created in your existing database.

Now make sure an existing or new SQL user has (public / datareader / datawriter) permissions for the new tables. You will be referencing this user in the asp code connection string so this user must be set up correctly. You may need your SQL server admins or hosting company to help you on this step as you may not have access to do this. You may not need to create a user and set permissions as the sql user you were logged in as to use query analyzer may by default get the correct permissions on anything you create.

Regardless, as you can see from this screenshot I made a SQL user called "aspprotectuser" and proceeded to set the permissions for that user. Under database access giving him (public,datareader, and datewriter permissions).


Now, in the ASP files provided with ASPProtect edit "dataconn_inc.asp" with a text editor and modify the connection string info. Be sure to change the info to match your server,username, and password.

Below is an example of valid connection string.

ConnectionString = "Provider=sqloledb;Data Source=poseidon;Initial Catalog=aspprotect;User Id=aspprotectuser;Password=temp;"

The  "Data Source" setting is either the Network Name for the SQL Server or the IP Address. For local servers you can sometimes use an IP of "127.0.0.1" or the name of the local server.

"Initial Catalog" is the name of your database.

Now, in the ASP files provided with ASPProtect edit "dataconn_inc.asp" with a text editor and set the DatabaseType variable to SQL like so.

DatabaseType = "SQL"

really all depends on the sql connection string you are using and the names of your sql user you are using...

you really havent described very much..

I'd double check all of it.. something is wrong

sure, there are reasons AOL would block the email.. it might think it is spam or it might not like the fact that fact that a cdonts generated email has no MX records because it can not..

for more on MX records read my CDOSYS article
http://www.powerasp.com/content/new/sending_email_cdosys.asp


as far as the emails not being sent because notifications are off. I was not aware of that and will try to look into it.. Version 6 is no longer worked on but if I can find the time I will check that out