upgrade pricing is here
http://www.aspbanner.com/purchase_unlimited_v8.1_classic_upg rade.asp

what is different
http://www.aspbanner.com/v8_notes.asp

the changes to make it work with MySQL were vast to say the least
more on that from an old thread
http://support.cjwsoft.com/code/code_info.asp?TID=37&PN= 1&TPN=1

just please remember use of MySQL is just not supported
http://www.aspbanner.com/mysql.htm

I can assure you it works well as I have people using it

http://gibsoncity.info/guestbook/default.asp

Reports 65-messages, however after the first 10 are displayed and you click on the More Messages button, I get the Page cannot be found error.

The parent paths things really should not be an issue.

This is an article from the troubleshooting section of the documentation that takes care of it all very easily.

http://support.cjwsoft.com/code/moreinfo162-1.htm


As for a good host that knows ASP and does not mess around when you ask for something. I always recommened www.alentus.com

Hi,

The source code comes with it.
They are the.vb files.

I don't give out any project files for reasons stated in the article below.

Please read this in full if you want to edit the application in Visual Studio.NET

http://support.cjwsoft.com/code/moreinfo85-1.htm

The album ID thing is completely normal and by design. Once an ID in the database is used it can not be used again. That is how autonumber fields in a database work.

As far as not being able to delete images... Are you by chance using ASP.NET to show dynamic thumbnails... Because if you are you must turn that feature off and wait 20 minutes or so (maybe more) before you will be able to delete any of the images. It is because the current version of the ASP.NET script used to make the thumbnails locks the images on the server temporarily anytime it creates a thumbnail.

It is a known issue... and there is no fix at the moment other than what I told you above.

I have sent an registration email (as test) to both a yahoo account and also my own email server and in both cases I get the same issue, all else is working great. I am sure its somthing simple, perhaps I am over looking somthing else. the site url is www.rochestertek.us/asp/users/register.asp if this helps

Again thanks.

ok, 1st we need to rule out the #1 reason people sometimes think that is not working.

Is is set up never to allow the same IP to increment the count more than once in a row so when testing it is real easy to think the count isn't working because unless you can change your ip you can not increment the count more than once per album

It's a poor mans spam abuse type of deal..
For the most part it will keep some Joker from hitting refresh 100 times and inflating the count of an album.

Do you think that is possible what is happening ?

Also, here is an older thread about the same issue?
http://support.cjwsoft.com/code/moreinfo54-2.htm

ok, here's a test page:
http://www.galvinelectricity.org/download_link.asp

user: test
password: test

Our company just got new computers, so everyone here has the same set-up, all Dells, all about 3 weeks old, all Windows XP.

But I did realize after reading your post that I am using Firefox and everyone else was using IE. When I used IE, I was able to duplicate the error.

But, alas, I am unable to resolve it. Client will be using IE, no doubt.

Okay,  I deleted out the aspprotect folder and started over.  I also took out the dsn connection to the ecommerce database and deleted out the subweb that had it, I decided to use another provided where the database is resident on thier servers not mine.

I broke my txt file into groups and it's loading sort of.  The first 1000 users uploaded fine...the second said it timed out, but when I looked at the access database it showed 2000 people.   The login still times out and every page seems to load incredibly slow still.

1) Does everything, i.e. every user, every category, every product, etc., get stored in just one single database, or are there multiple databases at work and are linked to one another?  I am asking because there is only one table in the DB, and it is the "Users" table.  So I am presuming that there must be other databases that are linked to the DB.  Is this correct? 

2) Are user-level security permissions utilized in the sample Access DB that is shipped with the software?  I am asking because we cannot seem to remove the "temp" password no matter what we try, and this is the only reason I can think of. 

I know what is happening.. its the old single quote thing messing up the query string..
but it shouldnt be happening with the newer code as I fixed it.

If you like I can go in and reproduce/fix the issue. I can not think of any other way I can help you as other users have not reported the issue.

Chances are if it is happening in one situation it will happen again in the future.. it really all depends on the passwords being used and your encyrption key... other passwords may produce the issue even if the password is correct

basically once the password gets encrypted it by chance has a single quote in it... then it messes up the query

I take care of the situation by replacing the single quote with a double quote but it looks like you found a situation where that didn't work out

Chris -

Sorry, I am looking at your code on view_item.asp and I have noticed that you are calling 3 variable; start_date, end_date, and image_url that do not exist in the databases that you provided.  Do I have the updated package for ASPVendor?

The redirection feature isn't working as I exected.

If I clear a user's redirection_URL, they can navigate to any protected page on my website as expected.

However, if I set the user's redirection_URL to a protected page, they cannot login. More specifically, their browser just keeps displaying the login form while the browser's progress bar just increments ad infinitum.

If I set the user's redirection_URL to a NON-protected page, the user is directed to that non-protected page, but if they then try to navigate to a protected page, they are redirected back to the redirection_URL.

Is this the way the redirection feature is supposed to work?

My application requires that a user is directed to a protected page and from there, they can navigate to any page that they are allowed to go to.

What can I do?

Thanks very much for the tip. I'm a beginner with all this stuff so forgive me for the inate stupidity!

By the way, I think the system is great and I am very pleased my purchase.

Chris -

Long time no talk, which is a good thing.  I have purchased another product from you, ASPVendor.  I am running into an issues.

When I try and remove the image through the image manager, it does not remove it.  Screen shot attached.

2005-10-19_194248_image_upload.zip

Thanks

When I designed the system I never really intended people to type in long descriptions for pictures

and if they did I assumed they would use the enter key once in while..

but I guess people dont do that

This thread is along the same lines and shows what someone else did about this..

http://support.cjwsoft.com/code/moreinfo99-1.htm

though they are talking about a different page its the same issue

it is not uncommon for folder permissions to be lost or changed on a server.. a lot of things can cause it

if it was working and now you can not edit or write new data to the database it is most likely permissions

I would triple check permissions... see my articles if there is any doubt on how permissions are set

http://support.cjwsoft.com/code/moreinfo136-1.htm

http://support.cjwsoft.com/code/moreinfo56-1.htm

yes, usernames and passwords are both case sensitive. It increases security.

If you still cant see the upload buttons after checking the settings send me a PM with the info and I will take a look at your installation. It will have to be up on a live server of course.

Not really sure how to do this.... i think you know what i am looking to do.. is there anyway you can show me or create that solution for me? It would prob. take you minutes as its been taking me hours

actually  I just went to it again and it was somewhat slow coming up this time..

perhaps you have some issues with the sql database.

it should be instant.. like this one I run on my server
http://banserver.powerasp.com/aspbanner/

I suppose it could also have something to do with sql server resources but its hard to say..

I have one file called asplistings.sql but I have license for ASPListings_auto and ASPListings_real_estate.  I really want to use the SQL server for both.  Please advise how?

Thank you.
Lance

Hi all,

I have the photo gallery set up at www.kashabowieoutposts.com/gallery

It's great - love to work with it.

But I've never been able to get those with just User permissions to be able to upload... Only an administrator is successful in uploading.  This was no problem in the past, but now this client would like to give their guests a means to share their pictures on their site - so now I have to figure out the bug...

... this is the error I keep getting...

Your upload did not succeed, most likely because your browser does not support Upload via this mechanism.

Your browser must support a standard called RFC 1867. Please check with your browser vendor for support of this standard.

------- anyone else experienced this?

Many thanks all!!

Doug

Hello,

I need to see if this is possible. I want to create a browsing system such that, the user selects a Province from a drop down list on the main page. Based the selection, the username of all the users in that province will be shown. Then the user can click on a specific username and his/her portfolio (photo album) will be displayed.

is this possible? If so, How can I do this, please help.

Thanks

Sean

How to set a new users expiration date.

You'll need to edit the "users/add_new_account.asp" with a text editor.

Find this section..

<%
CmdAddUser.Fields("ValidateEmailCode") = ValidateEmailCode
CmdAddUser.Fields("Access_Level") = "4"
' PUT YOUR CODE HERE
CmdAdduser.Update
ID = CmdAdduser("ID")
CmdAdduser.Close
Set CmdAdduser = Nothing
ConnPasswords.Close
Set ConnPasswords = Nothing
%>

You'll want to add code like this right between the Acccess_Level  and Updates section

CmdAddUser.Fields("Expiration_Date") = Date + 60

That will give take todays date and add 60 days to it.
You can of course do whatever you want here.

Actually, any database value for the user can be set during registration.

You can also change the default Access_Level to whatever you like.

You have old code I think.

It's probably because his password used with your encryption key by chance creates a single quote and messes up the database query

A notice went out about this. I will PM you the latest download with the updated files.

We are emailing a weekly newsletter via the Newsletter feature.  Many clients complain that they are not receiving the newsletter.  The emails are not bouncing back indicating that they possibly are not being sent to begin with. 

Is there any way we can determine if ASP is making it through the entire database of subscribers?