I did a sign up.. your verify URL is not saved/set in the application variables.

try saving the admin settings page again.. or reboot the server so the settings get reloaded

if you can make sure the web is it's own application in IIS

if it is your server do and "iisreset" from the command prompt

if all else fails you got iis application issues with the site... wait till tommoro to see if the setting gets loaded

When that link is clicked on it will then track the click and redirect the user to the “link url” specified for that banner. 

The system actually generates the necessary ASPBanner URL for you. That link is shown on the banner edit screen.(you must save the banner at least once and come back to that screen to see the link though) 

Really the best way to show it is with an example as seen below.

Basically the flash banner file "powerasp.swf" highlighted in green needs to be edited to link to the banner redirect url which is highlighted in red.... the banner redirect url will then track the click and ultimately send the user to the Link_URL highligthed in blue.

All banners systems work this way when it comes to flash files.
It’s the nature of flash and the web browser, 

The flash source code must be edited to link to the redirect url in the ASPBanner system. There is no possible way any banner system can track a flash click unless the flash file links to the banner system 1st.... because that click is handled by Flash and the web browser. 

In some cases if you do have the original source file for the flash banner then you are out of luck as far as tracking clicks goes.



On a side note... if you create flash banners the way this article says you can actually feed a .swf flash file a link for it to click to. Instead of it being hardcoded.

http://www.macromedia.com/resources/richmedia/tracking/desig ners_guide/index.html

This is really the way everyone should design their flash banners from now on because the url it links to can be easily changed at any time without editing the flash file source code. 

Not a problem.  Have a good time at your wedding.

thanks!

Hello,

It is very possible, however there may be some issues such as the session variables specific to a particular user would not be able to be created because there would not be a specific user.

I can't tell you exactly how to do it as it would probably take a few hours of messing around with the code to sort it out. Bascially, it's not something I could tell you how to do real quick and I do not support custimizations to the code.

But, it is very possible. You want to check the server variable for the IP address. The tricky part would be where and how this all just integrated into the "check_user_inc.asp" file

Okay Chris, I wold like to get rid of the encryption then if it's not too much trouble.

I have no option of running the production server against an ms access db, since the db needs to be online and accessible from another system.

Yeah, its working great witht he Access database. Now I just need to get it all set up. I like how the config file is set up with all the comments, it really helped allieviate the 40k thumbnails, .

I hear ya.. problem is it just does not fit into the banner rotation logic.

I know it sounds like a simple thing, but it is not because ASPBanner does it's rotation logic in a totolly unique way that no other system I know of does. It basically does everything in memory.

I just don't see anyway to do add what you are asking about without totolly re-writing how it works. The system would have to rely totally on complex (SQL queries / stored procedures) to do the banner rotation like every other poorly performing system out there.

It's really hard to explain, but I just no way I see to add it to the high performance application variable banner logic.  If I changed the system to not use those application variables there would be a tremendous performance loss because the database would be doing about 90% more work than it currently does.

As I have said before sacrificing performance is just not something I am willing to do.
http://support.cjwsoft.com/code/moreinfo144-1.htm

I built ASPBanner for performance and speed and that has always been it's main intention.

I leave the bloated features to the competition. If I lose sales because of it that is just unfortunate. I want the best performing system. The system I can be proud of. The system that can handle millions of impressions per day under a MSSQL or MYSQL installation and not even flinch. That is what ASPBanner is all about.

The other thing is pricing. The price is kept low partically because the feature set is low.

Maybe someday there will be a version with more features and less performace. I really do not know. Right now it's just not something I plan on doing.

Dear Christofer

I already have send you the details you asked me for. Please let me know if you have received

far as I can tell it does... that session abandon thing called in the logoff page should be enough to cover everything

once thing to be careful about

If you log in.. then log off... then go back to a page and do a refresh... you  may in fact be reposting the username and password from before.. thus logging yourself right back in

Perhaps not.. all depends on what your doing... but it is something to be careful of when testing 

Dear Support Team

I have read and Installed your v8 banner software

exactly as explained on XP pro which contains other asp working app.

I have problems with the " Application " and " Session" in your scripts

things that make the iis fall dead.

also in the file asp _unlimited_config.asp

you have exlained that every thing must be kept without the "" marks.

well i get http 500 error cause of it.

Please advise

Thanks

Ran

Please Note : Users with the option pack a new feature called groups that is much more powerful than access levels.


More On Access Levels

Again, Examples of managing Access Levels are provided in the "multiple_access_levels" folder included in the root of the Password System. Look at the source code of the ASP pages in that folder with a text editor to see the working code.

Access Levels and how they work can be re-coded to work in many different ways. However, you have to be a good ASP developer to make changes to it. Here is some information on how they work by default and also info on an alternate scenario we have provided.

In the "check_user_inc.asp" that comes in the root of this system Access Levels works as follows.

Level 1 has Access to - Level 1
Level 2 has Access to - Level 1,2
Level 3 has Access to - Level 1,2,3
Level 4 has Access to - Level 1,2,3,4
Level 5 has Access to - Level 1,2,3,4,5
Level 6 has Access to - Level 1,2,3,4,5,6
Level 7 has Access to - Level 1,2,3,4,5,6,7
Level 8 has Access to - Level 1,2,3,4,5,6,7,8
ADMIN has Access to - Level 1,2,3,4,5,6,7,8,ADMIN

The "check_user_inc.asp" included in the "extras" directory is an example of changing the access level checking code
to work differently. In that "check_user_inc.asp" Access Levels works as follows.

Level 1 has Access to - Level 1
Level 2 has Access to - Level 2
Level 3 has Access to - Level 3
Level 4 has Access to - Level 4
Level 5 has Access to - Level 5
Level 6 has Access to - Level 6
Level 7 has Access to - Level 7
Level 8 has Access to - Level 8
ADMIN has Access to - Level 1,2,3,4,5,6,7,8,ADMIN

If you get creative you can create some interesting access level checking scenarios.

Here is some additional info..

If the access levels are too restrictive you can ignore them all together and create your own totally custom solutions.
Here is a quick rundown of some of the things you can do.

Ok... so if you want to be really specific about what each user can see and
can't .. here's an example of what you can do

Don't use the access levels before the include file..
Don't worry about what you set a user to in the admin area since the access levels won't be used.

Do something like this..

Every time a user logs in session variables are set that you can access at
any time.. thus allowing you to know who they are.

So you could do something like this...


<%@ LANGUAGE="VBSCRIPT" %>

<!--#INCLUDE FILE="check_user_inc.asp"-->

<%
If Session("USERNAME") = "bob1267" or Session("USERNAME") = "carl45" or Session("ADMIN") = "True" Then
Session("PASSWORDACCESS") = "Yes"
Else
Session("PASSWORDACCESS") = "No"
Response.Redirect(Request.ServerVariables("script_name"))
End If
%>

The following URL explains what Redirects are.
http://www.powerasp.com/content/code-snippets/redirects.asp

That would in effect create totally custom access levels.. but you would
have to do it manually for each user.

You can also do things like this after a person logs in

Show custom html to any specific user based on either their username or
access level ... like so

say there was a menu and a certain link should only show up to username
"paully67"

you could do something like this


<HTML>
<HEAD>
<TITLE></TITLE>
</HEAD>
<BODY>


<br>
<a href="main.asp">Home Page</a>
<%
If Session("USERNAME") = "paully67" Then
%>
<br>
<a href="paullys_page.asp">Pauls Stats Page</a>
<%
End If
%>
<br>
<a href="links.asp">Links Page</a>

</BODY>
</HTML>

Or you can show custom HTML or links based on Access Levels or any other info.

You can do just about anything with if-then statements and
using the built in vbscript functions..

Hopefully this info will help to give you some ideas...

Bottom line is you have to do some work within your site to make the Access Level system really come alive.

Making progress. I have made the appropriate settings and now I have the option to upload.  When I upload, I get the following message:

 "Your upload did not succeed, most likely because your browser does not support Upload via this mechanism.

Your browser must support a standard called RFC 1867. Please check with your browser vendor for support of this standard"

I am using IE6 XP SP2.  I also am using DUNDAS UPLOAD, ASPIMAGE.

I think I set permissions correctly bot not positive.  I have given all auth to everyone for the database etc.

Hi,

I need to be able to add about 9 checkboxes to the register.asp. would I be able to use one of the custom fields?

The other thing is once I add the checkboxes the value must be written to the DB and later read when displaying the person's Album.

Any idea on how I can do this.

Thanks

Thought that was already done....

Back to the drawing board...

People who have the option pack have a new feature called groups.

Groups are meant as a replacement for using the access levels as they are much more powerful. Support for pages protected using access levels is left in tact for backward compatiability for a customers older protection code.

A customer recently told me groups could not be used like access levels and that 8 access levels was not enough. This is how I explained that groups can do everything access levels can do.



Groups can honestly do everything access levels can do if you really think about it.
Using groups and protecting pages accordingly you could actually create a system that basically worked identically to the way the access levels works.

For example..

You make 8 groups and assign users to them accordingly

Protection code on page allows access to groups 1-8
The aspprotect system generates this code for you…

<% GROUPACCESS = "1,2,3,4,5,6,7,8" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

In this case a user assigned to any one of those groups would have access..

Protection code on page allows access to groups 2-8
The aspprotect system generates this code for you…

<% GROUPACCESS = "2,3,4,5,6,7,8" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

In this case a user assigned to any group between  2-8 would have access..

Protection code on page allows access to groups 3-8
The aspprotect system generates this code for you…

<% GROUPACCESS = "3,4,5,6,7,8" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

In this case a user assigned to any group between  3-8 would have access..

Suprising I started this tread off on ASPImage, but I resolved my issue and forgot to change the thread topic.  I will try your suggestion.

I am brought to a logon page in which I cannot access the page.  This must be due to the check_user_inc.asp include.  Without the include I get a blank page.

We want to insert a hyperlink i the mesage area when we e-mail users from the Password Admin area.  Is ther an easy way to insert the hyperlink so when the user gets the e-mail, they can just click on it and go the the page we want them to?

Thanks,

Andy

Hi, I haven't heard anything from you.

Has this issue been resolved ?

Thanks

... in addition it is a virtual include not a file.  I just tried to use file instead of virtual and then the ../ includes worked on the asp pages.

This is strange because they used to work like that on the 2000 server I had these sites running on.

You can't do that. ASPProtect 7 does not work with ASP.NET.

It is a classic ASP application. As the web site states it can only be used to protect ".asp" pages written using vbscript.

ASP and ASP.net are completely different animals.

Thats why we have a .NET version.
http://www.aspprotect.com/more_info_net.asp

I believe I'm having trouble with Domain masking in that it appears to affect the ASP Photo Gallery login screen.

My address is forwarded and masked by my domain "company" (in this case: Godaddy.com). It is forwarded to a Win2000 Server running at my static home IP.

From outside of my network, the website appears to work fine...even the default.asp page works to the point of the login page. After entering a login and password - you hit the login button and the page simply reloads only with all of the header and footer information removed.

I found that by eliminating the domain masking feature at the domain company, the problem gets eliminated and the entrie site works fine.

Has anyone else run into this problem? I'm guessing it's the way the domain name is held in the browser cache but I'm not sure how to resolve it so that the ASPPhotoGallery scripts and pointers work correctly.

Eric

Not sure because of the nature of the javascript method

for starters tighten up the html around the banner call

change

<tr>
<td width="460" height="60" align="center" valign="middle" class="imagead">
<!------- ASPBanner Ad code ------------->
<script language="JavaScript">
var code = '';
var now = new Date();
var nIndex = now.getTime();
document.write('<s' + 'cript src=" http://www.nababaseball.com/aspbannernet/aspbanner/injectban ner.aspx?BannerZone=1&nocache=' + nIndex + '">');
document.write('</' + 's' + 'cript>');
</script>
<script language="JavaScript">document.write(jscode);</script >

</td>

to

<tr>
<td width="460" height="60" align="center" valign="middle" class="imagead">
<script language="JavaScript">
var code = '';
var now = new Date();
var nIndex = now.getTime();
document.write('<s' + 'cript src=" http://www.nababaseball.com/aspbannernet/aspbanner/injectban ner.aspx?BannerZone=1&nocache=' + nIndex + '">');
document.write('</' + 's' + 'cript>');
</script>
<script language="JavaScript">document.write(jscode);</script >
</td>

If that doesn't help I would suggest using the ASP 3.0 version of ASPBanner. It can serve banners to a any type of page extension and it runs just as well as the .NET version. There is a new iframe method for calling banners that you can try instead of the javascript. The iframe method is explained in the ASPBanner Unlimited section of the forum.

can add photo album but after i upload a pic, nothing shows.

where do i look to research why pics aren't showing in the albums

Hello cwilliams, and thank you for the fast reply.

Well, i have tryed with the ASPImage enabled and disabled, with the same results. I have used gifs and jpgs in the tests.
I have made some different test. Some with uploading the picture over an excisting picture and some as the first picture. Same results.
Everytime, it´s the 2nd thumbnail that won´t show itself, but the large picture will show, if you press the thumbnail.

I have tryed to look in the code (view_ad.asp), but as far as i can see, everything seems just fine ?!

I know, it wasn´t much help i could give you, but i think i have tryed all the possibilities.

Best regards, Erling

I have just purchased ASP v7 and loaded.  Followed instructions.  Obtained codes not prob.  Get to single field login screen, enter password and following page appears:

Method Not Allowed

The requested method POST is not allowed for the URL /temp/aspprotect/password_admin/get_me_in.asp.

Added folder aspprotect under (temp web) folder - temp, but also tried under root folder of web site.

Still no luck.

Hi,

Could you please advise what may be causing this error:

Microsoft OLE DB Provider for ODBC Drivers error '80004005'

[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x57a4 Thread 0x5474 DBC 0xf03a704 Jet'.

/ASPProtect/check_user_inc.asp, line 292

Funny thing is that if I refesh the page with the above error it gives me the following eror:

/ASPProtect/check_user_inc.asp, line 292

and after few times of refreshing the page it shows me the page I am after.

Is this my promlem or ISP's.

Thank you