Hi, I have not gotten anything from you about it.

click on the PM button below and send it that way through the forums.

Thanks

yes, PM me the encryption and cookie keys if you don't mind.
I can add it to my combinations that cause trouble.

it might help me to figure this problem out.

I checked with our web hosting company and CDOSYS is installed and properly registered on the Windows 2003 Server our site resides on.

How do I go about changing the ASPProtect code to use CDOSYS?

Please advise.

5 Computers in an office, random hardware and operating systems.  Some wireless some wired - all the same ISP connection.

Some users do not see the PLACE A NEW AD hyperlink.  How can this be hidden?  There is no conditional statement yet some see it and others don't.

To make this problem even more confusing if I take an image and put the place_new_ad.asp hyperlink on that image the users don't even see that image any longer.

How can this be resolved?

Hello

I have a strange problem with the thumbnails in the ASPClassifieds.
If i upload some pictures in an ad, the 2nd picture always shows with an x, as the picture doesn´t exists. But if i click on the 2nd thumbnail, the picture shows okay. I haven´t changed enything from the original code.
Does anyone have any idea, where it goes wrong ?

With best regards, Erling Larsen

at this point I would say install a fresh untouched copy in the web in a different directory and lets see if it acts weird from scratch.. the we can go from there.. I dont know what is going on

The pages in the ASProtect Full version that have emailing code in them are as follows.

password_admin/email_user.asp

password_admin/send_mass_email.asp

users/add_new_account.asp

users/email_password.asp

how about translating the error to english..

Looks to me off hand that it would have something to do with the SQL server itself not being run in an english lcid/format and causing some sort of date issue.

I would also suggest you start off with a brand new blank SQL ASPBanner database and make sure that works before you attemp t to import any data into it.

All this being said installing the desktop version of SQL may be a little tricky as it may complain that your SA account needs a strict password.

The solution is to run the SQL Desktop setup.exe with some parameters specifying a password for the SA account.

So you go to the command prompt or make a shortcut to the setup file and run something like this

setup.exe SAPWD="YourPassword"

minus the quotes...

I got that info from this article and it worked fine
http://www.experts-exchange.com/Databases/Q_21036508.html

The other thing to remember is it might take a reboot to actually see the SQL server icon running in the taskbar. You may also need to go into the administrative services and enable the "SQLSERVERAGENT" as well as set its startup type to "automatic"

And a reboot here and there..

Whammo... your in business...

Hi there,

Well, that is why we added the PayPal subscription pack where all of that is taken care of and customers get put under a recurring billing cycle.
The more people you get to pay that way the less you have to do.

We also have routines for the two other supported payment methods so people can look up their account and add time to it whether it is active/expired or not.

Other than that, yes it is something you need to sort out on your own based on how you want to run your system. You have the source code and the sky is the limit on how you want handle all of that.  You send out an email to users about to expire. Whether they come back to the site/look up their account and add more time to it is up to them. I really just do not see any way ASPProtect could handle that whole process automatically.

As for batch changing to users in the database. We give you the source code and we also use an open database structure. You can run any query you want on the database whether with ASP code or directly in your database using the tools that come with it, You can write any code you like to do whatever you like to the database. You can even tie other systems and code into the database via OBDC and manipulate data. The sky is the limit like I said. I also don't really see how batch changes to the database relates to individual users paying again for access or not especially since we include payment  pages were a users can look up their accounts and pay for and add more time to it automatically ? At least not regarding the payment routine we provide support for.

ASPProtect can not handle everything every person would need to do. It is meant as a solid starting point for any project, but there are going to be times when more functionality will need to be added by the customer based on their specific needs.

ConnectionString = "DBQ=C:\TradersReportsCom\aspprotect\data\database\ASPProtec t_access2002.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp"

I have already set the folder permissions as indicated in the documentation.

and the permissions, how exactly were they set ?
I find a lot of customers think they are setting permissions correctly when they really are not. That's why I wrote that long article on the subject.

As you probably know a data connection is a very low level thing. It is the foundation of any ASP application that communicates with a database. Unfortunatly it sometimes takes a while to get the hang of setting them up without issue.

Everything must be perfect.. the ODBC drivers must be up to date, folder permission are critical, sometimes you must use a new version of the access database.. etc etc etc  The errors and things that happen when all these things are not perfect and not helpful as you have found out.

I would suggest you download and get ASPTest from CJWSoft running before you go any further. It is designed to be as simple as possible and helps get a hang of the database setup process.

I noticed that is grabbing the wrong URL for some reason. Even when i mouse over the URL its somehow getting the users sub directory. How.. i dont know... when i erase that users in the url it works perfectly.

I am looking at the code in the .vb file and i dont see anything that could be causing it to do that... but then again i am no programmer LOL

Its obviously kicking in that users subdirectory somehow... what are your thoughts?

Anyone have any experience configuring PhotoGallery to use a backend mySQL database?

The application connects successfully for Read operations, but no amount of troubleshooting can get it to Write records to the tables.

http://www.marc-lisa.com/photos/default.asp

[QUOTE=cwilliams]actually, passwords can be up to 75 characters long in ASPProtect.
the only requirement when entered from a non admin user is that they are at least 4 characters long.

what does MSAccess have to do with this ? Are you trying to convert and old system or something? I noticed you created and "old password" field in there ? Is there something I do not know about as far as what you are trying to do?

Passwords in version 7 are encrypted so I hope you understand all of that and realize you can not enter or change passwords right from SQL server. Also if you import info you must handle that accordingly and convert the passwords to encrypted format. [/QUOTE]

First off, I haven't imported anything from MS Access.. The only reason I mentioned it is cuz I thought initially it worked with Access and not SQL server.

I am not converting nor entering any data manually into the db, nor have I changed anything in the way the registration is made (don't know where the "Old password" has come from? thought it was a function you made?)

Yup, it probably means the virtual directory is not configured as an Application in IIS.

You did put this in a plain folder in your web, correcct ?
Not a subweb

Regarding the application settings for the virtual directory.. if it is your server you set that stuff up in the IIS console.

If hosted somewhere it is there responsibility to have that set up correctly for you and you need to contact them and ask them what the deal is.

I have been using this solution for over a year now and think its great, however I recently logged on to add a banner and when I clciked on the link that opens a window, displaying all the gifs in the directory../images/banners/, now images showed up, however they do exist in that directory.

I recently upgraded my computer and am now using windows XP...could that be the problem?

Thanks

Hi,

The source code comes with it.
They are the.vb files.

I don't give out any project files for reasons stated in the article below.

Please read this in full if you want to edit the application in Visual Studio.NET

http://support.cjwsoft.com/code/moreinfo85-1.htm

The sql script creates aspgalleryuser

dataconn_inc.asp out of the box indicates aspgallery as the user.

GalleryConnectionString = "Provider=sqloledb;Data Source=127.0.0.1;Initial Catalog=aspgallery;User Id=aspgallery;Password=temp;"

I purchased the ASPGallery Pro last week and still cannot get it running. When I enter www.vickerylightning.com/aspgallery/dataconn_inc.asp on the screen it says "Not a valid bookmark"

Below is the connection string. My hosting company uses server map paths:

'Create database connection

'Create a connection odject
Set adoCon = Server.CreateObject("ADODB.Connection")

'Database connection info and driver
'strCon = "DRIVER={Microsoft Access Driver (*.mdb)}; DBQ=" & Server.MapPath("aspgallery_access2002.mdb")

'Alternative drivers faster than the generic access one above
'strCon = "Provider=Microsoft.Jet.OLEDB.3.51; Data Source=" & Server.MapPath("aspgallery_access97.mdb") 'This one is if you use Access 97
'strCon = "Provider=Microsoft.Jet.OLEDB.4.0; Data Source=" & Server.MapPath("aspgallery_access2000.mdb") 'This one is for Access 2000/2002
GalleryConnectionString = "Provider=Microsoft.Jet.OLEDB.4.0; Jet OLEDB:Database Password=temp; Data Source=\\NAWINFS04\home\users\web\b2623\rh.vickery2004\aspga llery\aspgallery_access2002.mdb; "
GalleryDatabaseType = "MSACCESS"

adoCon.ConnectionString = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source="&Server.MapPath ("\aspgallery\aspgallery_access2002.mdb") & ";"

Definitely need some assistance!

Rhona (rookie asp) -

It probably is. You would have to look at the paypal documentation for IPN and see what needs to be changed in the form code.

You can get all that info from PayPal's website.

There are tons of variables and options you can use with all of their code.
They have detailed PDF files full of information on all of them.

We have been using ASP Protect for a while now and are big fans of the program.  We received ASP Banner 8.2 with our puchase which we now have a need for.  I went to put the files on our webpage, and doing nothing else other than locating the directory there, I noticed differences with how ASP Protect operates.  We have customized it a bit and want to keep the 2 programs separate.  the login screen for one showed up on the other, and some ASP Protect pages appeared altered so i immediately deleted ASP Banner.  did I do something wrong, and how can i ensure the 2 programs work completely independant of each other?  We can't risk braking what we're now using but would really like to add banner functionality to some of our pages.  maybe an update to the program before we install?  puchase new software?  Thanks for your help-

Hallo,

Can I change the number of the access levels?

I want to have about 20 levels...

Our knowledge base which is hosted at a remote location is protected by ASPProtect Full Version 6. I would like to allow our employee to access the knowledge base from within our internal network unchallenged. Is there a way which I can modify the code "check_user_inc.asp" to allow any one coming from say 10.1.X.X to access the site unchallenged?

Thanks,

Mo

lets get back to using the forum and not the pm's  please only use the PM's for sensative information. its too hard for me to keep track of all of this as well as help everything else when I got an inbox full of pm's

Ok, so you say no paypal subscription info is being put in the database at all.

I know we have a bunch of people using the paypal subscription code with no issues so I know it works but obviously you got something wrong.

It could be a few things.

Did you enable IPN in the paypal system and put in a postback url like my directions say ?

Are you sure you are not getting paypal single payments and paypal subscriptions mixed up ?

Are the paypal links you made for paypal subscriptions in the correct format like are directions state ? That is critical and another example of something important that you have not shown me.

Did you populate all settings correctly for our paypal subscription code ?
This includes a correct and valid postback url because if that is not right paypal cant communicate with the aspprotect system and no info will get posted back from them at all.

You say your upgrade went well but if you did all all field names perfectly there could be issues with that.

There is just way too much for me to figure out under free support with the info you keep providing me.

I dont think we are going to get anywhere unless I go into your system and spend a considerable amount of time checking everything out. That is not something I do under normal support so if you are interested it is going to involve a fee paid via paypal. It's probably going to take me a while to check everything out and I need you to be 100% sure IPM is enabled in your PayPal account. If you are not sure how to turn it on search their help system as they have plenty of documentation on the process.

(Password Expiration Mod) for ASPProtect Version 7.x

This Advanced Mod requires decent knowledge of Databases and working with ASP. I originally wrote something like this for a customer on a custom project. I then took the time to re-write all the code from scratch so it could easily be plugged in to the current version of ASPProtect as an option. All in all this mod took me over 15 hours of time to develop and will save you a ton of time & money if you were planning on writing something like this on your own. Some parts of this were so difficult to get working that I would never have written this code if I was not paid to do so. (The encrypted array that rotates through the last 12 passwords was quite frustrating to get working)


 
The price on this is 19.95. I am not incorporating this into the base product because it makes things more complicated and isn't for everyone.

Purchase Page

Security is a big concern and making your users change their password every so often is a good idea. Keeping track of previous passwords they used and making them choose something they haven't used before takes the concept even further.

This Mod will add a password expiration date to the application. When the password expiration date is hit the user must confirm their old password as well as pick a new one before they can log in again.

There is a new password expiration directory where they must choose a new password that has not been used before. The new password must be confirmed during this process. (It remembers 12 old passwords the way it is coded) The old passwords are stored in the database in an encrypted array.


Directions:
Back up your existing ASPProtect installation.

Add two new fields to the "ASPP_Users" table in your database.

For an MSAccess Database

Password_Expiration_Date (Date_Time Field)
PreviousPasswords (Memo Field)

For a MSSQL Database

Password_Expiration_Date (smalldatetime)
PreviousPasswords (nvarchar 160 characters)

once that is done

Copy all the new ".asp" pages into your site.


Edit the "PasswordExpirationURL" variable in the "check_user_inc.asp" file

It needs to be the full URL to to the "change_password/default.asp" file


Now edit the "change_password/processchange.asp" file

There are 3 variables you can edit.

PageSentToAfter = "http://localhost/aspprotectmods/password_admin/default.asp"
PassMinLength = 4
PassMaxLength = 8

The "PageSentToAfter" is where you want them sent to after they change the password. It can be whatever you like.
If it is a protected page they should automatically get logged in with the new password they just changed to which is nice.

The other two values should be obvious.

That's it...

Just remember the password change thing is not used in the admin area...
You could easily add code for that on your own though by looking at the the password expiration code I added to the publics "check_user_inc.asp" file

Also:
You will see a new field to edit on the user edit screen for the Password Expiration of course. 

At one point I was using CDONTS_Installed but since I moved to a new Windows 2003 server I was told by my ISP that either one of these will work

I am using cdont to send email. what do i have to do send email to other display my full name instead  of email address. In other word I want to see first name last name  in their email client instead of email address.

thanks for your help

Now that I really think about it.. instead of logging that info to a text file and worrying about folder permissions you could probably just save the post info into an application variable during the paypal ipn.asp post like so

For Each Item In Request.Form
formdata = formdata & vbCrLf & Item & "=" & Request.Form(Item) & vbCrLf
Next

Application("PayPalPost") = formdata & " - " & NOW


then anytime you wanted to see if that info was there or when it happened you could make a simple asp page in your site to display the results like so

<%
Response.Write "(" & Application("PayPalPost") & ")"
%>

thats a new one... I need some sort of error to go on..

No error ever ? It must eventually show something ?