hello,

There is no built in option. You would have to add code to do that.
Its not difficult but custimization like that is not something I support.

[QUOTE=cwilliams]Humm, Did you make any changes to the code ?
Solid Black is not the default so it must have changed at least once.[/quote]

I did change the top_logo.gif and the associated link. That was on the default page not the Solid Black skin which is unchanged. After downloading/uploading the skins I tried changing it to one of the Beach skins and that's when it changed to Solid Black and has been stuck there ever since.

[quote]Otherwise it might be some sort of application variable problem.
I would make sure the web is and "application" in the IIS console.[/quote]I don't have access to the Microsoft IIS console as this is a host site. I can access the site's "control panel" but it does allow for those type of settings. Mostly just permissions, DSN entries, etc.

Thanks.
Al

Hope the wedding went well.  I have one this weekend.

I was successful at performing an upload.  The free upload software was either not configure properly (probably) or not working.  I downloaded the trial version of softartisan's upload (which is like over $300) and it started working. 

Can more than one photo be uploaded at one time (like a whole folder full of photos) or does each have to be done individually?

The company that hosts our business web site has been impossible to deal with in assisting me in getting asp protect to work. Getting the rights set correctly took 6 days and then getting parent paths enabled has been impossible. There last response was simply this:

The includes were changed so that if your server does not support "parent paths"
' and the "../" that you could easily change a few files like this and make the
' includes virtual includes instead of file includes. We didnt make them virtual
' includes by default because depending on where in your site you put the application
' the virtual include path would be different. They are also much different on a local
' development server than they would be on your real server
'
' Here are some examples of what you might change these includes to
'
' If you put the aspprotect folder in the root of your domain at your server
' example: www.mydomain.com/aspprotect
' then you would probably use
'
' #INCLUDE VIRTUAL="/aspprotect/dataconn_inc.asp"
' #INCLUDE VIRTUAL="/aspprotect/config_inc.asp"
' #INCLUDE VIRTUAL="/aspprotect/scripts/emailing_subs_inc.asp"
'
' Or if you didnt use the aspprotect folder and just put the contents of it in the root
' of your domain
' then you would probably use
'
' #INCLUDE VIRTUAL="/dataconn_inc.asp"
' #INCLUDE VIRTUAL="/config_inc.asp"
' #INCLUDE VIRTUAL="/scripts/emailing_subs_inc.asp"
'
' It really all depends on what works for your situation
' If you want more information on server side includes read this article at PowerASP
'
' http://www.powerasp.com/content/code-snippets/includes.asp

I am assuming that they will not enable parent paths and I need to modify some code. I do not know asp. WHere do I modify the code for a server that will not enable parent paths?

Thanks,

D

ok, well if you want to test on your own....  in the ipn.asp file for the subscription folder you will see this area of code used for testing

' Un-comment this section and give this directory proper permissions to enable logging to a text file
' Very helpful for troubleshooting
'   Set ObjMyFile = CreateObject("Scripting.FileSystemObject")
'   LogFileName = ("paypal.txt")
'   'Open Text File.. If doesn't exist create it and append to it .. If exists just append to it
'   Set WriteMyData = ObjMyFile.OpenTextFile(Server.MapPath("paypal.txt"),8,True)
'   RowHeaderString =  ""
'   RowHeaderString =  RowHeaderString & OrderID & vbTab
'   RowHeaderString =  RowHeaderString & Custom & vbTab
'   RowHeaderString =  RowHeaderString & User_ID & vbTab
'   RowHeaderString =  RowHeaderString & subscr_id & vbTab
'   RowHeaderString =  RowHeaderString & txn_type & vbTab
'   RowHeaderString =  RowHeaderString & subscr_date & vbTab
'   RowHeaderString =  RowHeaderString & Access_level & vbTab
'   RowHeaderString =  RowHeaderString & Groups
'   WriteMyData.WriteLine(RowHeaderString)
'   WriteMyData.Close

now that folder will need modify permissions for the text file to be written to but this is a good way to test if the ipn.asp page ever gets hit by paypal.

ITS REAL IMPORTANT THAT THE TEST FILE CAN BE WRITTEN TO OR DOING THIS WILL JUST CAUSE MORE ISSUES

To ensure the text file can be written to and permissions are correct for that folder you can make a new .asp in there and run this to see if the text file writing works

   Set ObjMyFile = CreateObject("Scripting.FileSystemObject")
   LogFileName = ("paypal.txt")
   'Open Text File.. If doesn't exist create it and append to it .. If exists just append to it
   Set WriteMyData = ObjMyFile.OpenTextFile(Server.MapPath("paypal.txt"),8,True)
   WriteMyData.WriteLine("the file was written to")
   WriteMyData.Close

Now, you can even change the location of the text file to place that does have permissions if you like.

This is what I would do if I was in there... then I would make some test payments using 1 cent and another paypal account (your allowed 2)

and see what happens

it is always possible the subscription code may have a bug in it. The last time I tested I only tested the single payment folder which worked perfectly. If I have time in the next couple days I am going to test the subscription stuff again. If there is something wrong I can cure it quickly.

The two routines share a lot of code in common.

If they changed the paths they moved the site.

That means permissions for the database folder must be set again.

If permissions are not set and you are not using the correct new path info then you will still get errors.

Those errors the server reports back and quite generic and do no mean exactly what they say. They just mean everything is not perfect.

And everything just has to be perfect..

I am running .asp pages and using the longer code method to display flash banners on my site.

I have noticed a considerable decrease in the loading of my index page when I have a banner called.  When I remove the banner, all is fine.

Any suggestions?

Dave

Not a problem.  Have a good time at your wedding.

thanks!

If you run asplistings auto in its own folder with its own application in IIS. Connected to its own database.

And you run your other version of ASPListiings in its own folder with its own application in IIS. Connected to its own database.

You will have zero major changes to make to anything... other than what you did above..

But remember theyare the same app and share a lot of thing including sessions and application variables.. that is why if they are installed in the same domain each one needs its own application set in the IIS console so they run seperately of one another.

5300 users honetly wouldn't even phase the database or the code... even with MSAccess...you got other problems and I can say that with 150% certainty

my guess is permissions on the database folder are not quite right or the odbc drivers have issues.. something along those lines..

access databases act up when full modify permissions are not given to the folder they are in.... they can also act up if the odbc drivers are very new and you are not using a newer version of the access database such as 2002 version as opposed to a 97 or 2000 version

using a system dsn as opposed to a dsn-less connection can also cause BIG issues. always use a DSN-LESS connection

you can also have big problems if just the database file is given permissions instead of the whole directory it is in

also, the script timeout has nothing to do with it.. if that is happening something is wrong with the data connection like I said... no amount of changing timeouts is going to cure it...

how permissions are correctly set
http://www.powerasp.com/content/new/windows_2003_server_and_ permissions.asp

why system dsn's with access databases are bad news
http://support.cjwsoft.com/code/moreinfo9-1.htm

I know it worked at 1st but it can still be related to all of this because when permissions are not perfect databases will work ok for a while and then act up. it all has to do with the temporay lock files that access creates and deletes on a regualr basis

Hello-

I'd like to set up the system to redirect to a landing page (say home1) after the user logs in.

I have looked at all the documentation and can't find something that explains how to do this. I am thinking that I can set up a log in as the default in my root directory that will have a form with an action=check_user_inc.asp. I have looked at the code there but cannot find a place where I would place a redirect to home1.

Help please

Thanks

Hi-

Thanks for the quick response to my previous posts.

This is my issue:

I have read over all the docs and installation instructions and can't find a way to do this:

my default page in my root dir will be a log in page which will take the user once his level is validated to a "home page". Is there a page in your examples that will perform the function of this log in page? or should I rename check_user_inc.asp as the default and change it's html output to make it look like my log in page?

I also looked within the code for check_user_inc.asp and did not see where to specify where the user will go once he signs in.

Your help is appreciated

Hi

I would like to ensure the the user uses a UK style postcode not a clue how to ensure this as I am new to asp. Any ideas?

regards

John

I am trying to protect and ASP page written in Javascript.  The first part of the page goes:

<%@LANGUAGE="JAVASCRIPT"%>
<!--#include file="../Connections/connWINGAP.asp" -->

When I insert the aspprotect code it looks like this:

<%@LANGUAGE="JAVASCRIPT"%>
<!--#INCLUDE VIRTUAL="/GIS/WCGIS/GISProtect/check_user_inc.asp"-->
<!--#include file="../Connections/connWINGAP.asp" -->

and I get this error: 

Microsoft JScript compilation error '800a03f7'

Unterminated string constant

/GIS/WCGIS/GISProtect/check_user_inc.asp, line 2

I think I understand that your code is written in VBscript and that is why it is not working.  If this is the case, how can I switch to VB to execute your stuff then switch back?

Thanks,

Jess

New question...

When someone edits their personal information, such as address, is there any way to set it so that someone in the office can receive an e-mail noting the changes?

Thanks.

Hi - I am a recent user of your software. I administer it for the owner. I probably missed something in your forums somewhere - but I'd like to know how to stop the software from sending an "accept registration" e-mail (after they fill out the registration page) from going out so fast - usually within minutes.  I'd like to know how to defer the message for 24 hours, more or less, so that our company can go over the registration details and decide whether to allow the person registering to actually have access to our protected website pages.  The program is working very well and we are excited about it.  So far, no problems (knock on wood!).

Thanks so much for your help!

when I go to that url is seems fairly fast and somewhat normal.. even when I try to log in it pops right back up asking for login info again..

I would check to make sure you are not running anything that might be effecting your web browsing.. software firewalls.. ad blockers.. script blockers... norton internet security.. zone alarm... anything like that

they can all effect a lot of things regarding how web browsers act.

Hello,

Again, enspecified error are not very helpful.
An error usually tells you at least a line number and page or something.

Please read this as it might help do tell me more.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=11& PN=1

As for only happening once in a while. It could be a lot of things.

Version being used (when did you purchase.. what name/email was it under and I can look) ?
What banner method being used?
Access or MSSQL ?
How busy the site is ?
Server Resources ?

Hi Chris,

Thanks for the answer. No, I am not using Paypal since these are employees and sales reps. I guess i'm on my own on this one. :)

Thanks
Sylvain

Well Chris:

I logged off too soon after your last response. Your last idea was the answer. I am running McAfee as my virus-scanner on the mail server I am running. There was a script inhibitor enabled as a worm detection function. When I disabled it, your software responded correctly. I guess I can do without that, although with everything thrown at the net these days, it makes me a little nervous.

Thanks

Alternate Method to call banners from non ".asp" pages.

<iframe src ="http://localhost/aspbanner/aspbanner/aspbanner_inc.asp?Ban nerZone=4" width="468" height="60" frameborder="0" marginwidth="0" marginheight="0" scrolling="no"></iframe>

Be sure to delete the space in the BannerZone variable above. I am not sure why it is doing that in this post.

You can try calling the banners in an simple iframe like so.
This method should work much better than the javascript method because users with javascript turned off will still see the banners. You also will not have any of the limitations the javascript method has. Iframe is now supported by most recent browsers so it is now a good solution. Here is a chart that shows which browser versions support iframe.

Be sure however to edit the height and width values accordingly as that is very important.

How to set a new users expiration date.

You'll need to edit the "users/add_new_account.asp" with a text editor.

Find this section..

<%
CmdAddUser.Fields("ValidateEmailCode") = ValidateEmailCode
CmdAddUser.Fields("Access_Level") = ""
' PUT YOUR CODE HERE
CmdAdduser.Update
ID = CmdAdduser("ID")
CmdAdduser.Close
Set CmdAdduser = Nothing
ConnPasswords.Close
Set ConnPasswords = Nothing
%>

You'll want to add code like this right between the Acccess_Level  and Updates section

CmdAddUser.Fields("Expiration_Date") = Date + 60

That will give take todays date and add 60 days to it.
You can of course do whatever you want here.

Actually, any database value for the user can be set during registration.

You can also change the default Access_Level to whatever you like.

Something very strange is happening.  Some users can't see the classified ads in their browser.  This is specific to the user's computer, and they can check other computers and see it fine.

In each case, the user is using windows explorer 6.0 browser with windows xp.

they can't see the ads listed on the ads page, but they can see the categories.

also, they can't see the place ad link on some pages.

Do you think that their browser is blocking the javascript for the mouseover message?

thanks.

Umm, if your using MSACCESS your using MSACCESS

SQL server has nothing to do with it.

It's probably something I could do for you as a custom project if you are interesting in paying to have that work done, but it is probably not something that will be added to this version of aspbanner as it is in my opinion a feature more suited for a more expensive software package.

It is also difficult to get ASP code to do things on it's own. Scheduling something to run on the server or some other clever scenario is necessary and that usually means it would be unique to each persons setup.

http://www.cjwsoft.com/custom_work.asp

(User Search & Contact Mod) for ASPProtect Version 7.x

This will allow an individual user to search for other users as well as email or call them.

Notes: This is a down and dirty mod. The users page from the admin area was used as a starting point. I then edited it up real quick to be used as a user search. The way it is it shows the user email as a regular email link. If you want to set it up so emailing is done from the application and emails are not actually shown you will have to do some extra work. If you don't want phone numbers shown you will have to remove that column which is not very difficult.

Directions:
Back up your existing ASPProtect installation.

copy "search.asp" into your "users" folder

2006-03-10_143253_User_Search_Contact_Mod.zip

Direct your users there. They will have to be logged in to view the page.

WARNING: This has not been extensively tested for SQL Injection attacks.
I think it is perfectly fine the way it is by looking it over quickly, but use it at your own risk.

If you are using an ACCESS Database try to avoid using a system DSN. They are much slower because they go through ODBC which then uses the Jet Drivers to access the database. They also have to do a registry lookup.

ttp://www.4guysfromrolla.com/webtech/070399-1.shtml

http://www.powerasp.com/content/database/dsn_vs_dnsless.asp



It's funny because in the 4guys article they ask the question..

"Hmmmm... so who was right, Microsoft or Wrox?"

I'll tell you who was right and who said it 1st.  It was me and I said it on my old powerasp.com site before anyone else ever did.

I found it out on my own by experimenting when I was the Systems Analyst for an large ISP. We we had web servers that were not running well. I didn't read about this solution anywhere because no one was talking about it at the time. Microsoft said use System DSN's so everyone just took their word for it.

I took a lot of heat for saying that back in the day but over time everyone started saying it.

again.. more custom code work would be required to handle it

It is refered to as the internet guest account but that isn't the actual username. The username is different for every machine. It usually starts off with "IUSR_" and then your machine name. "Internet Guest Account" is always the account's full name as labeled by IIS when it is installed.

Regardless,

If an account isn't listed you have to add it.

Click (add-advanced-find now) and it will list off all the user accounts on the machine

You can also click (add-advanced) and simply type in the account name or part of it.

Some more tips:

If on a local machine you always just give the "everyone" account full control which is pretty much going to make anything work.

You can also go to computer management in your server's administrative tools and view all of the accounts  and groups there under "Local Users and Groups".

You are not supposed to use "../" with a virtual include

Thats goes against what a virtual include is and makes no sense.
When using a virtual include you give the path as if accessing from the root of the main web / virtual directory

I find it very hard to believe it ever worked like that and if it ever did it was wrong.

(FREE) Nov 23 2005 Update Files

If you purchased ASPProtect Version 7.x before Nov 23 2005 then you can download these Update Files.

(These are non-critical updates.. only update if you want the described changes below)

These updates do the following..

• Make the Tabs in the Admin area move up and down as you navigate around so they look more like tabs used in a file cabinet.
  
• Updates the import/export process so the tab delimited text files created now store the passwords in plain text instead of encrypted. I have been thinking about this one for a while now and I think it is better this way as it was confusing a lot of people. If can also kill the whole process if by chance the encrypted output of a password contains a line break of sorts. There is no way to deal with that scenario so this is way the import/export process is going to work from now on. This also means you should be VERY carfeful about leaving export files lying around as they will have the passwords in them.
  
• Updates the "expected_paths.asp" in the data folder because the paths it was generating had an extra "data/" in it.
  
• Updates the users page so it will not show the import/export link if you have not entered a path for the export files in the settings.
  
• Adds an Activity Tab if using the Activity Tracking features instead of the links it used to put on the users page that most people didn't see.

To install these just copy them in over the old files.

Now of course back up your existing files so can revert back if there is a problem or you do not like the changes. If you made any custom changes to any of your pages use your head and realize that copying these in over your existing files will overide any custom changes you made. (that is your business, I am just warning you)

2005-11-23_163025_ASPProtect_v7_11-23-2005_update.zip

The file check_user_inc.asp as the lines: (which include Session("groups")

 Here we set some valus about the user into session variables
   Session("PasswordAccess") = "Yes"
   Session("Access_Level") = CmdCheckUser("Access_Level")
   Session("Admin") = CmdCheckUser("Admin")
   Session("Active") = CmdCheckUser("Active")
   Session("Expiration_Date") = Expiration_Date
   Session("User_ID") = CmdCheckUser("User_ID")
   Session("Groups") = CmdCheckUser("Groups")
   Session("Redirection_URL") = CmdCheckUser("Redirection_URL")
   Session("Password") = RC4(CmdCheckUser("Password"), PasswordEncryptionKey)
   Session("Username") = CmdCheckUser("Username")