Humm, Did you change something in a bad way? Thats my guess.

I need more information on what is going on because by default it does not do that ?

The only possible way I can think of that could cause that is if you changed things around too much and the config_inc.asp file is getting run/included twice on that page your logging in to.

Also, when you sign in "where" ? What page ?

Version 8.1 can work with MySQL
http://www.aspbanner.com/aspbanunlimited_v8.asp
It is just not supported at all.

The standard version can not work with MySQL.
There were a lot of changes to make the new version work with it and I really only did ift because I have a couple friends with busy sites that could only use MySQL.

It sounds like your site is way too busy for using an access database as you mentioned.

that's they way it should be done..

the only other thing would have been to test everything with sql before trying to import any data.. and make sure all was fine at that stage




more info on the errors would be helpful.

Id' also carefully visually compare the SQL tables and fields with the SQL scripts and make sure all field types and settings got set correctly.

Also, make sure the user accessign the database has datareader and datawriter permissions of course.

Hi,

First and foremost, a great product. I downloaded it last night and it took little effort to get it up and running

.....now a little question...

Has the software/code been tried out on a Mysql db and if so did it work?

The reason I ask is that my website is very busy (1.5million page views per month avg) and I'm considering converting the ASPBanner Access db to a Mysql one to help handle the traffic. For every page view one banner impression is being made which means that the Access db is under a bit of pressure

This afternoon there were 1012 simultanious users on the website and it froze with an error message displaying where the banner should have been (I didn't quite catch the message but something to do with the banner script timing out). I'm not sure if the Access db had something to do with it but it seemed too coincidental. Rebooting the server cured the problem but obviously kicked off the visistors as well
At present there's 668 online and no problems so I'll have to monitor it to see how it goes but if anyone can answer the Mysql question I'd be grateful

Thanks,

Dave

I made the changes like you suggested, but now the page just times out before even loading. 

<%
ConnectionString = "DBQ=D:\clients\rklarman\DrWeisbergUsers.mdb;Driver={Microso ft Access Driver (*.mdb)}"
DatabaseType = "MSACCESS"
%>

The count is in the album area where the small pictures and description of album.   Viewed 1 time(s)  This count never changes.

Thanks

 John

look in the "check_user_inc.asp" file

Thank you that did it !!

Hello- I am trying to install the ASPPROTECT product and tried to read all the docs but still am getting the following error:

[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x1980 Thread 0x1458 DBC 0x223c374 Jet'.

I understand about the physical path for the DSN-less connection and followed the example given. I got in touch with tech support for the host of my site and the give me the following as a physical path:

c:\sites\Single20\laptv1\database

Some observations:

1.- The database directory is outside the root dir but I think I am accounting for it with the path

2.- The permissions are ok

Any ideas?

Thanks

FP

IMPORTANT UPDATE - READ THIS
http://support.cjwsoft.com/forum/forum_posts.asp?TID=205& ; ; ; ; ; ; ; ; ; ; ;PN=1

The 2Checkout Support Pack which is built in to ASPProtect 7 contains all the pre-built scripts you need to implement 2Checkout Payments with ASPProtect. You must be using version 2 of the 2checkout system. They are phasing out version 1 regardless so everyone will be using version 2 very soon if they are not already.

THIS IS NOT INTENDED OR DESIGNED TO USE 2CHECKOUT SUBSCRIPTIONS. (see bottom of this thread for more info on that)

This Support Pack basically gives you an additional signup and registration directory "2checkout_signup" and it should not interfere with any changes or customizations you have made to your ASPProtect setup in general. New users can register in this directory and pay for membership at the same time. Existing users whether active or expired can be sent to this directory where they can lookup their account and buy additional membership time online. You can also assign various Access and Group Levels during signup and you can set up various prices for various amounts of time as well. This is a real-time setup for the most part. As soon as a user pays via 2Checkout your system is updated and they will have access.

The 2checkout pack is NEW.. and was released on March 19, 2005. If you don't have it and would like it please just ask.

To start using this edit the "2checkout_signup/2checkout_config_inc.asp" file

You will be entering your 2Checkout Account number in that file as well as the URL you want a user to go to after payment. It is all commented in that file. (There is also a testing variable you can set to True if you want to do testing without real charges being applied)

After editing that file run this page.

http://www.mysite.com/2checkout_signup/show_postback_path.asp

Replacing the part in blue with your website info.

It will report back that postback url you need to use in the 2checkout system.

Log into your 2checkout version 2 account and under the "look & feel section" enter that postback url for both the "Approved URL" and the  "Pending URL"

Trust me: You want the URL there for a pending URL because the 2Checkout system is quite random and 95% of the payments that come in go to the pending URL and end up being legitimate sales. (at least for me they do)

Now make sure the Direct Return option on that page is on as well. 

If set to Yes buyers will be immediately directed to your URLs below once they click the Complete Order button. If set to No the buyers will have to click a button to return to your URLs below.

Save that page... and leave 2checkout.

Now, delete this page from your ASPProtect setup.
http://www.mysite.com/2checkout_signup/show_postback_path.asp

It's a minor security risk and is no longer needed needed.

The basic setup is finished. All you have to now is set up payments options the way you want them.


Changing Payment Options

In the "2checkout1.asp" file there are form options set up.

They look like this and you can have as many as you like.

<option selected value="30,9.95,3,">30 Days, 9.95</option>

In this option... A user has the option to purchase 30 days for $9.95 and he will be set to Access Level 3 when payment in completed.

Here is how it works.

The value setting (red) is essentially and array that can be made up 4 elements separated by comma's
They must be separated by a comma and there can be no spaces. In this example the 4th value was not used but the last comma must still be there. If you didn't want to set an access level and left out the "3" there would 2 commas at the end.  etc etc
Basically there must always be 3 commas but you only have to set the 1st 2 values which are days and price.

days,price,access level,groups

The 1st value is the amount of days.
The 2nd value is the price for the amount of days.
The 3rd value is the access level you want to user assigned to.
The 4th option is the groups you want the user assigned to. (see PayPal subscription thread for examples of specifying group info)

Now, the label for the option in (blue) can say whatever you like.

Well Chris:

I logged off too soon after your last response. Your last idea was the answer. I am running McAfee as my virus-scanner on the mail server I am running. There was a script inhibitor enabled as a worm detection function. When I disabled it, your software responded correctly. I guess I can do without that, although with everything thrown at the net these days, it makes me a little nervous.

Thanks

humm, I dont know.

If you want me too I would be glad to go into your web site and troubleshoot. If so PM me the info I need and I will take a look and see if I can figure it out.

CJW

Below is the email I received when testing the self-registration. Does anyone know what setting I configured incorrectly?

I received the email to confirm the registration but the link to activate is invalied.

Thanks!

Your registration still has to be validated.
Go to
?u=bubbaj&v=4579
to verify your registration.

I did not make a mistake.. what I typed is what I meant to say. I think maybe you are taking it the opposite way as I explained it.

Regardless,

What you want to do... logging them in under https and then having them continue though the site under http is not possible.

It doesn't work that. way. As far as the webserver is concerned https is a totally different site than http and each have their own unique set of application and session variables.

In a sense no different than www.somesite.com is different then somesite.com (each has their own unique set of application and session variables as well).

Now, because of the nature of Forms Based Authentication session varibles created under one will not carry over to the over and thus no password access if you switch over from a secure url to a non secure url.

If you want them logging in under SSL you need to keep them under SSL.

That is not to say there is some ultra complex scenario to mimic the session variables on the non secure side of things (possible with a complex http post to a non secure page from the scure page telling it what variables to create and set), but doing so means a ton of work and also has security concerns of its own.

That would not happen unless you added a target to the login form or you're code had a base target set.

Like so..

<base target="_blank">

I would really need more detailed information. It's nothing the system does the way it ships under normal circumstances. For example you shouldn't see that behavior in any of the example protected ".asp" pages

that is unless you have something odd going on with your browser settings or you made changes to the login form or code around it causing it. (or you are using frames and dont have some of the targets and what not set correctly)

My guess is that it has to be something you added or did, but I really need to know more to offer more than that.

I have a solution for asp already but thanks anyway. Is there a good book or other learning tool I can purchase that you might know about? I would know where to start about how create a timed subscription in .NET.

I did the initial steps of downloading the sql scripts and running it in Query Analyser, tables created fine.

I can login for the first time. I exit from the browser and then I cannot login again. This happens for every user and admin.
I noticed that the values in the fields "Login_limit" and "Active" in the ASPP_Users table in the SQL changed to NULL and 0 when login and remained in those values after close the browser.

So iam just struck not able to log in. Pls advice.

I am getting the same error looking at the previous post, I looked in settings and my Registration-URL is pointing at the correct location.

Is there any other thoughts on this issue

Thank you!

Matt2112

Hi there,

Well, that is why we added the PayPal subscription pack where all of that is taken care of and customers get put under a recurring billing cycle.
The more people you get to pay that way the less you have to do.

We also have routines for the two other supported payment methods so people can look up their account and add time to it whether it is active/expired or not.

Other than that, yes it is something you need to sort out on your own based on how you want to run your system. You have the source code and the sky is the limit on how you want handle all of that.  You send out an email to users about to expire. Whether they come back to the site/look up their account and add more time to it is up to them. I really just do not see any way ASPProtect could handle that whole process automatically.

As for batch changing to users in the database. We give you the source code and we also use an open database structure. You can run any query you want on the database whether with ASP code or directly in your database using the tools that come with it, You can write any code you like to do whatever you like to the database. You can even tie other systems and code into the database via OBDC and manipulate data. The sky is the limit like I said. I also don't really see how batch changes to the database relates to individual users paying again for access or not especially since we include payment  pages were a users can look up their accounts and pay for and add more time to it automatically ? At least not regarding the payment routine we provide support for.

ASPProtect can not handle everything every person would need to do. It is meant as a solid starting point for any project, but there are going to be times when more functionality will need to be added by the customer based on their specific needs.

Thanks for that. The upload size is just as effective and possibly a better solution to maintain server space.

What about individual gallery permissions. So only 1 member can post in only 1 gallery. I have a forum of 500 plus members so if they want to add a gallery than setting a permission would be idea for each gallery.

I am also getting the "Unspecified Error" message.  I just transferred my site to IIS 5.0 and I get that error now.  However it does not happen everytime.  I can click on a page and it opens fine and then I hit refresh in the browser and I get the "Unspecified Error" message.  What could be causing this?

I wonder what that ENDSQLMail send failure is all about ?
I dont use anything regarding SQLMAIL in the ASPProtect code.

I think I might need to go in so I can debug a bit. Everything seems to work fine with a SQL installation here so I just don't know at the moment.

If that is ok with you I would need ftp access or something so I can trry a few things and hopefully figure it out. Admin access to the aspprotect admin area as well so I can see what you have set up in there.

PM me with that info if you want me to take a look.

If a picture does not show after uploading it is one of the following things.

The upload method chosen is not supported on the server
or
The physical path specified to the pictures folder is not correct.
or
The URL to the Pictures folder is not correct.
or
Permissions to the pictures folder have not been set properly


Here is more information on how permissions are set.

http://support.cjwsoft.com/code/moreinfo136-1.htm
http://support.cjwsoft.com/code/moreinfo56-1.htm

Without more information and the settings you have entered and chosen that is all I can offer for now.

Hi,

I am investigating the possibility of purchasing above script having spent some hours trying to integrate various free banner rotators into my Invision portal.

What attracts me to your script is that it has 6 ways to call banners. I am an inexperienced webmaster with only a smatterring of knowledge about ASP. Will ASP Banner be able to integrate with my portal?

Many thanks

David van der Want

Please be more specific. What hit count are we talking about ?

User Logging ? Albums ? Something else ?

Please descriube the situation in detail. There are really no settings for any sort of hit count.

That did the trick. Once again a quick very helpfull reply.

Thanks.

Protecting ASP Pages

To protect a page without using the Access_Level or Groups feature simply add this code to the top of that page.

Put this under the <%@ LANGUAGE="VBSCRIPT" %>

<!--#INCLUDE FILE="check_user_inc.asp"-->

This is an example of a File Server Side Include. You could also use a Virtual Server Side Include.

The following URL explains what Server Side Includes are.
http://www.powerasp.com/content/code-snippets/includes.asp

Now when someone runs that page they will prompted to login. They will not be allowed access to that page until they successfully logged in.

An example of doing this is provided in the "default.asp" file included in the root of the Password System.
Look at the source code with a text editor to see the working code. It is quite simple.

 Protecting ASP Pages Using Access Levels

To protect a page using the Access Level feature simply add this code to the top of that page.
You simply specify the Access Level before the include file is called. In this example we are protecting the page with Access Level 4.

Put this under the <%@ LANGUAGE="VBSCRIPT" %>

<% CHECKFOR = "4" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

This is an example of a File Server Side Include. You could also use a Virtual Server Side Include.

The following URL explains what Server Side Includes are.
http://www.powerasp.com/content/code-snippets/includes.asp

Now when someone runs that page they will prompted to login. They will not be allowed access to that page until they successfully logged in as a Level 4 user.

Examples of managing Access Levels are provided in the "multiple_access_levels" folder included in the root of the Password System.
Look at the source code of the ASP pages in that folder with a text editor to see the working code. Again, It is quite simple to follow.

Protecting ASP Pages Using Groups

Please see the code generators in the admin are for the code to do that.

it is by design actually and something that can be improved
(I just never thought of it when I 1st designed the system and it is actually planned to be added in Version 8)

The trick would be to reset those session variables anytime someone edits and saves their information... not very hard at all

you would do it on the save code page for when a user edits themself.
you want to grab the info posted from the form and  reset each session variable at the same time everything is re-saved to the database

example

Session("Company_Name") = Request("Company_Name")

Hi,

I can't seem to find the code where it limits the upload file size. I want to limit the upload size to 1.5 mg for all users. Also I've noticed that the 500 pix doesn't seem to work. As in if an image is bigger than 500 pix the script still uploads it. i am using Upload_post_VBSCRIPT.ASP.

Thanks

Is there any way to extend the limit multiple login feature to a certain number instead all or none?  In other words, i need to have a user be able to use the same login for x number of people.  My customers are institutions and want to be able to have a single login for however many users they purchase for.

Hi Chris,

Alright.  We figured out how to work with both C# and VB, by creating a separate VB web project in VStudio, and then passing the aspprotectnet.dll to the C# project.

Ok.  I have another question:

How can our code determine the identity and user_id of the currently logged in user:

Is it Session["User_ID"].ToString() and Session["Username"].ToString()?

thank you

FYI:

The articles you references were read over by me like 3 hours ago... way passed that and prob. in deeper sh*t than i was since im trying everything possible without knowing the true reason this is not working.