Hi there,

Well, that is why we added the PayPal subscription pack where all of that is taken care of and customers get put under a recurring billing cycle.
The more people you get to pay that way the less you have to do.

We also have routines for the two other supported payment methods so people can look up their account and add time to it whether it is active/expired or not.

Other than that, yes it is something you need to sort out on your own based on how you want to run your system. You have the source code and the sky is the limit on how you want handle all of that.  You send out an email to users about to expire. Whether they come back to the site/look up their account and add more time to it is up to them. I really just do not see any way ASPProtect could handle that whole process automatically.

As for batch changing to users in the database. We give you the source code and we also use an open database structure. You can run any query you want on the database whether with ASP code or directly in your database using the tools that come with it, You can write any code you like to do whatever you like to the database. You can even tie other systems and code into the database via OBDC and manipulate data. The sky is the limit like I said. I also don't really see how batch changes to the database relates to individual users paying again for access or not especially since we include payment  pages were a users can look up their accounts and pay for and add more time to it automatically ? At least not regarding the payment routine we provide support for.

ASPProtect can not handle everything every person would need to do. It is meant as a solid starting point for any project, but there are going to be times when more functionality will need to be added by the customer based on their specific needs.

ok,

IE and firefox do some things differently.

It could very well have to do with MIME types set on the server for your website. pdf probably isnt set as a mime type which can cause issues with file streaming situations.

Mime types are either set in the IIS console for your web site under the http headers tab or you can try setting the content-type header to 'application/pdf' right on the asp page the does the streaming

see this article which shows how to do that
http://psacake.com/web/gj.asp

'Specify a MIME type such as "text/html", "image/gif" or "application/pdf"
Response.contenttype = "application/pdf"
'Useful in cases for unknown file types

You would want to put the code that sets the contentype as close to the top of the asp page doing the streaming as possible.

http://support.cjwsoft.com/code/code_info.asp?TID=319&KW =paypal

>>I should also mention that the paypals scenarios used in ASPProtect can not be tested using PayPal's sandbox.

>>Also test using two real PayPal accounts and on a live setup. (You'll allowed two paypal accounts) then you can log into the other and refund the transctions and of course it makes sense to use low amount like 1 cent and what not.

Yeah, been messing around with that.  Got everything going except the return page which I can't do until the site is live. 

>>Also, I'd love to see what you came up with with the integration. I have been working on it here as well and took it in a different direction as I plan to sell directions for it as an add-on for aspprotect.

Ok.  Will email you with a username and password for access to the site once it's live. 

Sounds like a great add-on for ASPProtect!

import/export feature WARNING !!

I just want to warn everyone that the built in import/export feature can be a little dangerous.
The reason being is when you import users they get new "Users_ID"s in the database.

The "User_ID" field is an autonumber field and that is why and there is nothing you can do about it.

So, if you are using a user's current "User_ID" to keep track up something important NEVER export the users and re-import them. Because their "User_ID" will change and you will be in trouble.

The PayPal signup features of ASPProtect actually use the "User_ID" like this and that is the main reason this warning is here.

now, that being said

If you are importing new users into ASPProtect

or

simply exporting existing users to another system

then this is nothing to worry about.


Basically, the moral of this story is dont think of the built in Import/Export feature as backup system because it is not. It is not a substistute for backing up your database.

It is a just a tool that can come in handy for various things.

Hello,

1.)

I dont really have any ideas about the japanese characters. I also don't have any ideas about changing settings in the database. Your going to have to do some research on all of that.

Perhaps try pasting the text into a text document 1st.. then copy/paste them into the application. Perhaps that will eliminate any unseen weird characters. I do it sometimes when pasting things from word to my html editors and it works great.


2.)

I dont/cant support custimization to the code but here are some tips to get you started.

edit "items_inc.asp" carefully with a text editor
(back it up before you begin so you can revert back)

change this anywhere you see it

?SORTBY=Name

to

?SORTBY=Name+Asc

or

?SORTBY=Name+Desc

Expiriment to see which gives you the desired sorting.
Do the same process for the price.
The + Sign just passes a "space" back to the page in the proper format if you are wondering.

3.)

The items for page setting is easy. Just go to the settings page when logged in as the admin. Edit this field.   "ResultPageSize"

But can you guess as to why the following might be happening:

1) The password is still "temp", and we verified that by checking dataconn_inc.asp ; 2) People are able to place new ads, etc. ; 3) We then download the DB.  Sometimes we are able to open up the DB just downloaded with the password "temp", but only see the USERS table.  At other times, we cannot open the same DB with any password, and get a "password not valid" message even when using the password "temp".

So what can the problem be?

Just an update,,,

the permission were all correct.... i left it and tried from my pc at work and it works fine... so i dont know what hahhpened.... thansk for your quick response

regards

Domenic

Sydney, Australia

I got ya. Well hey, that's what's great about the iframe right?

I have set up a user to be redirected to a different page when logging in for the first time.

I assumed this function would count the number of times a user has logged in. When the login count was greater than 1, the user would be taken to the default.asp 

This isn't happening. The user is always redirected.  The user login count in the database is now 9.

What am I missing?

I am having problems with a password a user wants to use.  He wants HANNAH.  When he (or I) try to log in with his username and password, I get a syntax error  -

Syntax error in string in query expression '(Username = 'changedforsecurity') AND (Password = ' éG'.
pathOnComputer../1protect/check_user_inc.asp, line 114

I've obviously changed the username and the server path in the info above for security. 

I have not messed with the encryption.   

What is it that the system doesn't like in the word HANNAH as a password?  I would just change his password for him but this guy has enough trouble just turning the computer on!  Confusing him with a new password would take weeks to set him straight. 

Thanks,
Mick

Hi Chris,

When I run the physical map test this is what I get:

The Physical path to this virtual website is: \\NAWINFS04\home\users\web\b2623\rh.vickery2004

Will that work correctly without a drive letter specified?

Thanks

Rhona

I would look on the pictures folder on the server and see what is there for pictures. Also, when you see a broken X on the site right click and see where it is trying to get the picture from and what the pictures name should be.

I would also be sure to clear out your temporary internet files in IE. clost and restart all browsers..

maybe show me the site ? so I can see this happening ?

One is for paypal subscriptions (recurring billing) and the other is for single payments

http://support.cjwsoft.com/forum/forum_posts.asp?TID=185& ; ; ;PN=1

http://support.cjwsoft.com/forum/forum_posts.asp?TID=186& ; ; ;PN=1

You can delete any of the 3rd party payment directories you are not using including the the 2checkout one... (all those folders really are is a copy of the users folder specially modified to handle a certain payment processor)

Just Don't delete the "users" folder though as there are things you do there that you can not do anywhere else..  quite a few things..  editing existing account info, looking up passwords... etc etc

I think I've found the problem..

The password "abcdefgh" works

The password "abcdefghi" does not

(username "ace45")

Passwords can obviously only contain up to and including 8 characters... By some coincidence I only used short passwords with MS Access.

ASPProtect v7.x runs on Microsoft IIS servers only.
That means Windows XP Pro, Windows 2000 server and Windows 2003 server. The web server must have ASP support enabled and support Data Connections. 99% of them do as it's a pretty normal thing, but you should ask and make sure your hosting plan supports it.


Before you even start please read this thread and do what it says.
If any errors show up it is important you see the real error instead of a useless HTTP 500 internal server error.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=11& PN=1

Once doing that make sure to use Internet Explorer as you follow along with these directions.

Now, unzip your installation zip file that you downloaded from CJWSoft.
Use a program like winzip and be sure you have it set up to unzip the directories as well. You can also use windows xp's built in folder compression tools to unzip the archive.

When you unzip the application you should have all of the following folders and files. (more or less, it depends on the version)

Now, you can copy all of these files into the root of your website or if you like you can make a folder called "aspprotect" and put all of these folders and files in that folder. Either way it really does not matter.

Now, contact your web hosting company and instruct them that you need permissions set on the data folder that you copied into your website. This folder and all of its child folders need modify permissions set on it for the anonymous webserver account. It is very important that they set the permissions correctly and on all the child folders as well.

Here are some threads on exactly how these permissions are set.
If you run your own server or are developing locally you can do this yourself. If not most likely you need to put in a request to your hosting company as you CAN NOT set these permissions via Frontpage or FTP.

Windows 2003 Server and permissions
http://support.cjwsoft.com/forum/forum_posts.asp?TID=136& ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ;PN=1

Windows XP Pro and permissions
http://support.cjwsoft.com/forum/forum_posts.asp?TID=56& PN=1

Once permissions are set.. run this page via your web browser

http://www.mysite.com/data/setup_info.asp

Replacing the part in blue with your website info.

When this page is run it will report back a screen like so:



Now, take the connection string info it shows you.
Edit the "dataconn_inc.asp" file in the root of the ASPProtect system and use that data connection information. It should be valid for the server.

If you are using MSSQL server instead of Access please see the SQL database creation directions as you will need to create the MSSQL database and use a special connection string for that.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=160& ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ;PN=1

Now, take the CookieEncryptionKey and PasswordEncryptionKey info that it gives you and enter it into the "config_inc.asp" file in the root of the ASPProtect system. These will be the unique keys that your encryption will be based off of.

Ok...

The files have been copied to your website, the permissions are set on the data folder, and the database connection is ready.

Now.. run this page

http://www.mysite.com/password_admin/get_me_in.asp

Replacing the part in blue with your website info.

This is a special page we use to get into the system for the 1st time.

If you get a nasty error when you run that page similar to this.

Error Type:
Active Server Pages, ASP 0131 (0x80004005)
The Include file '../dataconn_inc.asp' cannot contain '..' to indicate the parent directory.

Then parent paths are disabled on the webserver and you need to do an extra step to deal with that. Follow this link.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=162& ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ;PN=1&TPN=1

If you get any other variery of "80004005" error then there is a problem with your data connection.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=27& PN=1

Those errors are usualy related to database folder permissions or an imcorrect physical path to the database file specified though they can mean a lot of things.


Once you get the page running you will see a login prompt and one form field

You will need to paste the "PasswordEncryptionKey" value that you used in the "config_inc.asp" file in the form field and hit enter.

If all goes well you will see the admin area of ASPProtect.

Now that you are in the system you need to create an admin account.

Click on "ADD NEW USER".. fill out the info and add a user.
You really only need to fill out (first name,last name,email,username,and password)

Now save that user.

You should see a new user listed in the admin area. Click on Edit user to the left of the new account. On the edit screen check the "admin" checkbox and save the user.

You just created an Admin account.

Now click on the "log off" button on the top menu and click yes to log off.

Now close the browser. Then run this URL

http://www.mysite.com/password_admin/default.asp

Replacing the part in blue with your website info.

You should now be able to in to the admin area of the system using the new admin account you created.

You are now ready to go to the settings page so click on the settings tab in the menu. There are a lot of options and paths that need to be set on this page. Every setting is described in detail on this page. You need to go through the page and set things up properly. Anytime the page asks for a path to a url or file the page will auto generate what should be the path to use. (expected path) If your server has parent paths disabled a few of those auto generated paths will not show up. If that is the case run this url from your server and it should tell you the paths to use for those settings.

http://www.mysite.com/data/expected_paths.asp

Replacing the part in blue with your website info.

Once your all done and the system seems to be running fine you should go back and delete the following pages as they are no longer needed and pose a potential security risk.

http://www.mysite.com/data/setup_info.asp
http://www.mysite.com/data/expected_paths.asp
http://www.mysite.com/password_admin/get_me_in.asp

You should back up the original zip archive you got from CJWSoft in case you ever need those files again.

VERY IMPORTANT: The user passwords from now on will be encrypted using the "PasswordEncryptionKey" you specified in the "config_inc.asp" file.

If you ever change that key all of your passwords will be invalid and you can not get them back unless you know the key and put it back, so plan on never changing that key unless you really know what your doing and know how to decrypt/re-encrypt the passwords using a new key. (something we do not cover at the moment but probably will when we have time to make a tutorial) 

I have written asp.net application pages- obviously i knew what viewstate was, or else when they made a mistake on that page it would not have saved their filled in info. Same thing for after they submitted, when they hit the back button their info would be gone.

For someone who wrote this software it seems you are not able to do simple things. Im begining to think you didn't write it. The only reason no one else asked this many questions is possibly because they didnt NEED the functions i am TRYING to do.

I know how the log boxes work. Esp. reg ASP... they all allow you to enter your username and password and then when you hit submit it gets verified and transfers you to your destination. ASP.NET has that capability also.. i didn't purchase a program to go and have to re-write it in visual studio. It would take me longer to re-write YOUR code than it would to have LEARNED ASP.NET and made MY OWN.

The program seems to have some great complex features, however, your not able to incorporate this easy login from a diff. page function... fishy

Hi,

Its just not enough information to go on. I need more details on what is going on. There are a lot of configuration settings in these applications. I really do not know what to make of that screen shot.

My 1st guess is that if you cannot delete a picture that the picture folder does not have delete permissions ??

I also need to mention that I am not sure what this has to do with ASPImage ?

I'm using the groups protect feature on my pages. None of them seem to close the session after clicking 'logoff'. I can tell because if I hit the back button and return to the group-protected page, hit 'refresh', the page refreshes, I'm not asked to log in again.

On the other hand, when I open a page that's protected by an access level and click 'logoff' (uses same logoff asp file to logoff), it seems to work fine - if I go back a page and refresh, it asks me to log in.

Just wondering - is anybody else having problems like this? Maybe I screwed something up in the few adjustments I made a while back. Any idea what it might be?

It's probably something I could do for you as a custom project if you are interesting in paying to have that work done, but it is probably not something that will be added to this version of aspbanner as it is in my opinion a feature more suited for a more expensive software package.

It is also difficult to get ASP code to do things on it's own. Scheduling something to run on the server or some other clever scenario is necessary and that usually means it would be unique to each persons setup.

http://www.cjwsoft.com/custom_work.asp

Using "Email Authentication" as a registration option you cannot do that. There is no possible way I know of to have a delay on the authentication email like that. Also that method is not intended to involve any sort of manual registration like what you are doing.

Because you want to review people manually you need to change to registration process to "manual" and then send the email out manually from the users screen after making a user active.

I'll try to help when I get back tues night,, see the contact page for info on where I am .
http://www.cjwsoft.com/contact/default.asp?Subject=CJWSoft+G eneral+Inquiry

Whein I went by the numbers off of your directions, which work well up to that point, the import would time out.

At that point I tried to import directly into access...and then it hung trying to login.

okay so I've put in a clean database and created a new record for me as admin.

far as I can tell it does... that session abandon thing called in the logoff page should be enough to cover everything

once thing to be careful about

If you log in.. then log off... then go back to a page and do a refresh... you  may in fact be reposting the username and password from before.. thus logging yourself right back in

Perhaps not.. all depends on what your doing... but it is something to be careful of when testing 

it's ok

one step at a time and at each step testing things.. then when you mess something up you can figure it out a lot easier

Actually it would because you would just count records for that user that are also active

and yes, users cant delete albums.. they can only turn them off which really means the albums lose their active status

only the admin can truly delete an album the way the code is
(that's just the way I did it for some reason.. I don't remember why)

Christopher

Found this but I dont really know what to do with it or even if its the right thing.

<%
'=========================================================== ==================='

' Application:     Utiity Function
' Author:          ; John Gardner
' Date:         & nbsp;  20th December 2004
' Description:     Used to check the validity of a postcode
' QueryString:     None
' Version:         V1.0

' Required routines:        &nb sp; None
                    
'----------------------------------------------------------- -------------------'

function Check_Postcode (byRef strPostcode)

' This routine checks the value of the form element specified by the parameter
' for a valid postcode.

' The definition of a valid postcode has been taken from:
' http:'www.royalmail.com/docContent/other/Downloadable_Files/ PAF_Digest_Issue_5_0.pdf

' If the element is a valid postcode, the function value is returned as TRUE
' and the postcode is returned in uppercase with the separating space in the
' right place.

  Dim strPostcodeRegExp(2)   ' holds the regular expressions for valid postcodes
  Dim intCount        &nbs p;      ' For loop counter
  Dim strPostcodeCopy        ' Copy of postcode
 
  ' Variables used to hold regular expression object  
  Dim objRegExp, objMatches, objMatch
 
  ' Expression for postcodes: AN NAA, ANN NAA, AAN NAA, and AANN NAA
  strPostcodeRegExp(0) = "^([a-z]{1,2}[0-9]{1,2})([0-9]{1}[abdefghjlnpqrstuwxyz]{2})$"

  ' Expression for postcodes: ANA NAA, and AANA  NAA
  strPostcodeRegExp(1) = "^([a-z]{1,2}[0-9]{1}[a-z]{1})([0-9]{1}[abdefghjlnpqrstuwxyz]{2})$"
 
  ' Exception for the special postcode GIR 0AA
  strPostcodeRegExp(2) = "^(gir)(0aa)$"

  ' Copy the parameter and convert into lowercase
  strPostcodeCopy = Lcase(strPostCode)
 
  ' Assume we're not going to find a valid postcode
  Check_Postcode = false
 
  ' Strip out spaces
  strPostcodeCopy = Replace (strPostcodeCopy, " ", "")
  Check_Postcode = False
 
  Set objRegExp = New RegExp
 
  ' Check the string against valid types of post codes
  For intCount = 0 to Ubound(strPostCodeRegExp)
 
    ' Check next pattern in list
    objRegExp.Pattern =  strPostcodeRegExp(intCount)
    If objRegExp.Test (strPostcodeCopy) Then
   
      ' Post code found. Ensure input parameter is in correct format.
      Set objMatches = objRegExp.Execute (strPostcodeCopy)
      Set objMatch = objMatches(0)
      strPostcodeCopy = Ucase (objMatch.subMatches (0)) & " " &  Ucase (objMatch.subMatches (1))
     
      ' Show that we have found the postcode
      Check_Postcode = True
    End if
  Next
 
  ' Ensure that the uppercase postcode gets returned if valid
  If Check_Postcode Then strPostcode = strPostcodeCopy
 
End Function
%>

regards

John

If you want to have a login form on a non protected page that posts
to a protected ".asp" page use code like this.

Change the action of the form to the page you want them to log into.
Make sure to page you send them to is protected by the "check_user_inc.asp" file.

<center>
  <table border="0" width="400" height="200" bgcolor="#000000">
    <tr>
      <td bgcolor="#F4F4F4">
        <form method="POST" action="memberarea.asp">
          <input type="hidden" name="Status" value="Checkem">
          <p align="center"><font face="Arial">ASPProtect Login</font></p>
          <div align="center">
             <center>
             <table border="0" bgcolor="#C0C0C0">
               <tr>
                 <td bgcolor="#EBEBEB"><strong><small><font face="Arial">Username</font></small></stro ng></td>
                 <td><input type="text" name="Username" size="10"></td>
               </tr>
               <tr>
                 <td bgcolor="#EBEBEB"><strong><small><font face="Arial">Password</font></small></stro ng></td>
                 <td><input type="Password" name="Password" size="10"></td>
               </tr>
               <tr>
                 <td bgcolor="#EBEBEB" colspan="2"><font face="Verdana, Arial, Helvetica" size="-1"><input type="checkbox" name="KEEPMESIGNEDIN" value="True">Keep
                   me signed in on this computer unless I log off.</font></td>
               </tr>
             </table>
             </center>
          </div>
          <div align="center">
             <center>
             <p>&nbsp;<input type="submit" value="Login"></p>
             </center>
          </div>
       
        </form>
      </td>
    </tr>
  </table>
  </center>

BTW.. I dont know what is going on But I keep getting all these returned emails. My forum is sending you emails and they are coming back as undeliverable saying your storage space is exceeded on your server.

I just upgraded from 6.0 to 7.0 primarily because we were limited in the choices of email systems we could use to send an email validation message.

Previously, with 6.0, we were using CDONTS to send an email validation message to new registrants. Unfortunately, AOL email addressee's were not receiving the vaildation email from us. I received a reply to another post I made on this forum that the problem was due to the fact that aCDONTS generated email has no MX record and AOL blocks non-MX record containing emails.

Well, I upgraded to 7.0, switched to CDOSYS (Using SMTP Virtual Server) with SMTP Authentication and it appears that AOL is still blocking the validation email.

Any suggestions, comments?

It's real easy actually if ya sniff around the source code.
ASP is so easy to (work with/edit) even if you dont know any code.


edit   "save.asp" with a text editor

change

If Request("First_Name") = "" Then
  ErrorMessage = ErrorMessage & Server.URLEncode("You must enter a First Name.\n\n")
End If

to

If Request("Company_Name") = "" Then
  ErrorMessage = ErrorMessage & Server.URLEncode("You must enter a Company Name.\n\n")
End If


From looking at that save code I dont see where Last_Name was required. The only name I saw required was a 1st name.

Also.. making the First_Name not required may break something somwhere else. I dont think it will but it might. You are warned.

I'm trying to use CDOSYS.

It seems to work fine on the web page, however the mail never gets
delivered.

I can see my messages sitting in c:\inetpub\mailroot\pickup but they never leave it.

I found another folder after doing a search for "pickup".... it is:
d:\program files\Exchsrvr\Mailroot\vsi 1\PickUp     If I paste the files
into there, they get delivered.

How can I get the email to be delivered without doing the cut and paste?

I've tried it both with and without authorization.

I am running a Windows 2000 server with Exchange 2000.

Thanks.

(FREE) Nov 23 2005 Update Files

If you purchased ASPProtect Version 7.x before Nov 23 2005 then you can download these Update Files.

(These are non-critical updates.. only update if you want the described changes below)

These updates do the following..

• Make the Tabs in the Admin area move up and down as you navigate around so they look more like tabs used in a file cabinet.
  
• Updates the import/export process so the tab delimited text files created now store the passwords in plain text instead of encrypted. I have been thinking about this one for a while now and I think it is better this way as it was confusing a lot of people. If can also kill the whole process if by chance the encrypted output of a password contains a line break of sorts. There is no way to deal with that scenario so this is way the import/export process is going to work from now on. This also means you should be VERY carfeful about leaving export files lying around as they will have the passwords in them.
  
• Updates the "expected_paths.asp" in the data folder because the paths it was generating had an extra "data/" in it.
  
• Updates the users page so it will not show the import/export link if you have not entered a path for the export files in the settings.
  
• Adds an Activity Tab if using the Activity Tracking features instead of the links it used to put on the users page that most people didn't see.

To install these just copy them in over the old files.

Now of course back up your existing files so can revert back if there is a problem or you do not like the changes. If you made any custom changes to any of your pages use your head and realize that copying these in over your existing files will overide any custom changes you made. (that is your business, I am just warning you)

2005-11-23_163025_ASPProtect_v7_11-23-2005_update.zip

I'll try to help when I get back tues night,, see the contact page for info on where I am
http://www.cjwsoft.com/contact/default.asp?Subject=CJWSoft+G eneral+Inquiry

no, you cannot unless you plan to write a lot of custom code.

That is why the option pack has groups which eliminate the need to use access levels because groups can do everything access levels can and more.

There is an article here regarding that.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=32& PN=1