Banners no longer show up on my site ?

If banners were working fine and now they are just not showing up.
1st check to see that you are calling a valid zone with live banners in it.
If you are then most likely this it what hapened.

The web server must have crashed or lost power and now the application variables are in limbo/not working.

I have seen this happen a few times.

Basically the application variable system gets messed up because it was not shut down properly.

The way to cure it is as follows.

Edit and save a banner in the system. Hopefully that gets things going again.

If this happens a lot it is a server issue, not ASPBanner's fault.

far as I can tell it does... that session abandon thing called in the logoff page should be enough to cover everything

once thing to be careful about

If you log in.. then log off... then go back to a page and do a refresh... you  may in fact be reposting the username and password from before.. thus logging yourself right back in

Perhaps not.. all depends on what your doing... but it is something to be careful of when testing 

ok, that probably means the physical path you have set for the logfile directory (in the admin settings area) is not correc t

the error pretty much means just what it says

Javascript Popup/Pop Under Generator

Until I have time to make one I suggest using the one on the banmanpro support site as it is pretty nice.

Just dont use option 2 on that page as that is specific to banmanpro

http://www.banmanpro.com/support/popupgenerator.asp

Is there a way to set various members to upload a limit of photos. So, one member can only upload 5 photos in 1 album and another can upload 30 photos in 2 albums. Even if you just set a permission for the number of uploads for each member.

Thank you

Looks great. I can't wait until this will be released. Will there also be an easy way to migrate my current version ?

Hans

it has been 3 days since I logged myself in under Admin, and all the user information on the User Activiy screen seemed to be gone.

is there any specific length of period it refreshes its user information??

sometimes those emails take a bit... all depend on wht you are using to send them and whether a pickup directory is involved

as for the other I do not know.. PM me the site details I can look

if it is a 2003 server parent paths must of course be enabled.. its a requirement of aspclassifieds

The way the application ships there are no password confirmation areas anywhere ? Please be more specific as to what you have done and if any mods are involved ?

If you are talking about one of the MODS please realize they are not supported. http://support.cjwsoft.com/code/moreinfo459-1.htm

Even though they are not supported I look them over pretty closely and I know of no issue like you mentioned so I would suggest re-downloading the MOD. Perhaps you got a corrupt download or file.

Hi,

Its just not enough information to go on. I need more details on what is going on. There are a lot of configuration settings in these applications. I really do not know what to make of that screen shot.

My 1st guess is that if you cannot delete a picture that the picture folder does not have delete permissions ??

I also need to mention that I am not sure what this has to do with ASPImage ?

               Also, I’ve been trying to modify the code to adapt it for our application -- by removing fields that we do not need such as address, city, state, phone, but I am having trouble getting visual studio to compile.  It could be due to the fact that the rest of the project is in C#.  Or it could be due to some other factor in ASP Protect.

The code is ok..

Your getting an error because no banners are showing up in that zones rotation.

run this directly in the browser and you will see that there are no banners being generated for that zone ID
http://www.poconocommuter.com/aspbanner/aspbanner_inc.asp?Ba nnerZone=6

As a matter of fact I dont see any banners showing up for any zones previous to 6 which tells me either you dont have valid banners in there or the application variable info got corrupted do to a server crash / power off or something.

http://support.cjwsoft.com/code/moreinfo95-1.htm

1st off.. you appear to have some strange things going on with that domain. Looks like you have a frameset and are loading another domain in it which is always confuding especially if you are running the site off your home computer or something... I am not sure

That aside..

If I go to

http://www.bones.myftpsite.net/rfamilystuff/default.asp

and click on the "familiy" category

then right click on a broken image.. look at properties

Your linking the image to your localhost

see

http://localhost/rfamilystuff/pictures/Pic_3_1_thumb.jpg

and that is wrong, just like I said above

Nobody running the site off any computer but your development machine is going to see those pictures because the url isnt valid for them

My guess is in the settings you have the "PictureURL" set to

http://localhost/rfamilystuff/pictures

when it should be

http://www.bones.myftpsite.net/rfamilystuff/pictures


Good luck with this.. I am going to the bar.
If you need more help I probably will not be available until Monday.

Not sure because of the nature of the javascript method

for starters tighten up the html around the banner call

change

<tr>
<td width="460" height="60" align="center" valign="middle" class="imagead">
<!------- ASPBanner Ad code ------------->
<script language="JavaScript">
var code = '';
var now = new Date();
var nIndex = now.getTime();
document.write('<s' + 'cript src=" http://www.nababaseball.com/aspbannernet/aspbanner/injectban ner.aspx?BannerZone=1&nocache=' + nIndex + '">');
document.write('</' + 's' + 'cript>');
</script>
<script language="JavaScript">document.write(jscode);</script >

</td>

to

<tr>
<td width="460" height="60" align="center" valign="middle" class="imagead">
<script language="JavaScript">
var code = '';
var now = new Date();
var nIndex = now.getTime();
document.write('<s' + 'cript src=" http://www.nababaseball.com/aspbannernet/aspbanner/injectban ner.aspx?BannerZone=1&nocache=' + nIndex + '">');
document.write('</' + 's' + 'cript>');
</script>
<script language="JavaScript">document.write(jscode);</script >
</td>

If that doesn't help I would suggest using the ASP 3.0 version of ASPBanner. It can serve banners to a any type of page extension and it runs just as well as the .NET version. There is a new iframe method for calling banners that you can try instead of the javascript. The iframe method is explained in the ASPBanner Unlimited section of the forum.

Your probably talking about "Session.Timeout" which is a feature of the IIS webserver. Please do a google search on it for more information.

In the meatime if you look at the top of the "check_user_inc.asp" file you should see a section like this where you can try to change the value.

' Minutes you want before the session times out.
' This is set on the server to be default to 15 or 20 minutes depending on the server version
' You can change it there or override it here.
Session.Timeout = 30

Specifying it like that is supposed to overwrite the value for your web in the IIS console which is usualy 20 minutes.

Some of our users complained that their users id and passwords are sent in the clear. So we decided to invest in an SSL certificate from Verisign. It has been tested fine with all forms and pages in ASPProtect version 6. The only remaining page which I am not sure how to protect is the home page. Let's say my home page is http://www.MyDomain.com/index.asp. When the user goes to this link he/she will be presented with the check_user_inc.asp page so he/she can enter their ID and PW. So how to make the login information send from this page thru HTTPS?

in Control_pic.asp is there way to wrap the description field so that it doesn't go outside the table.

Thanks

Hello -

Believe it or not I finally can access the photogallery. You were right Chris regarding the unzipping of the files.

Now onto the next challenge! I have set up three categories and proceeded to create a test album. I uploaded a couple of pictures (yeah that worked!!!) but the album does not show up on the default.asp page under the category.

Please advise -
Rhona (rookie)

Hi Chris,

Our company has a big dilemma on how to manage the database for accounts that are expiring/expired.

We saw the function to email a batch of users who are expiring soon but this doesn't help us to complete the renewal process.

Once the email is sent, what happens afterwards? how can we setup the system so that we can renew their expiry dates or accounts without too much hassle?

The system currently doesn't have any renewal functions or to allow batch changes on multiple accounts at the same time so we have to manually edit one account at a time. This is extremely tedious if we have over 1000 accounts to manage (and we will).

If you have anything to suggest on all this I would appreciate it :)

Thanks alot
Sylvain

ahhh ok.. I was going to wait till morning to answer this one..

glad ya figured it out

humm, I dont know then..

If you want PM me your site info and I will go in and troubleshoot.

Frontpage or frontpage access, either way

and also the site URL

Terribly sorry, but we are not software-technical.  So can you please tell us exactly which folder the database would be in.

Thanks in advance.

The random password is generated during signup and the function that creates it is located on this page of code.

users/register.asp

it looks like this

Function RndStr(Length, UseChrs)
 If IsNull(UseChrs) OR (UseChrs = "") Then UseChrs = "0123456789abcdefghijklmnopqrstuvwxyz!@#$%^&*()_+=-"
 NewStr = ""
 Randomize(CByte(Left(Right(Time(),5),2)))
 For gpIndex = 1 To Length
  NewStr = NewStr & Mid(UseChrs, Int((Len(UseChrs)) * Rnd + 1), 1)
 Next
 RndStr = NewStr
End Function

For example go to this page and hit refresh and watch the password change.

http://www.aspprotect.com/demo2/users/register.asp

Yes, sometimes if you hit refresh quickly over and over you'll get the same password, but not generally. Also that is not something that would happen normally as a user isnt going to sit at that screen and hit refresh over and over.

Anyway... when signing up the new user of course has the option to change that password to something they would like better...

As far as... "selecting the same user name and password every time"

I need more information. That does not make sense for a lot of reasons.

Most importantly because usernames are not generated. The are inputed by the user during signup. They are then checked to ensure they do not already exist before the user is allowed to complete their signup.

So under normal circumstances there can never be duplicate usernames in the system or even users with duplicate emails as that is checked as well.

Now of course if you edited the code in any way it is possible all this is not working correctly ?

Protecting ASP Pages

To protect a page without using the Access_Level or Groups feature simply add this code to the top of that page.

Put this under the <%@ LANGUAGE="VBSCRIPT" %>

<!--#INCLUDE FILE="check_user_inc.asp"-->

This is an example of a File Server Side Include. You could also use a Virtual Server Side Include.

The following URL explains what Server Side Includes are.
http://www.powerasp.com/content/code-snippets/includes.asp

Now when someone runs that page they will prompted to login. They will not be allowed access to that page until they successfully logged in.

An example of doing this is provided in the "default.asp" file included in the root of the Password System.
Look at the source code with a text editor to see the working code. It is quite simple.

 Protecting ASP Pages Using Access Levels

To protect a page using the Access Level feature simply add this code to the top of that page.
You simply specify the Access Level before the include file is called. In this example we are protecting the page with Access Level 4.

Put this under the <%@ LANGUAGE="VBSCRIPT" %>

<% CHECKFOR = "4" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

This is an example of a File Server Side Include. You could also use a Virtual Server Side Include.

The following URL explains what Server Side Includes are.
http://www.powerasp.com/content/code-snippets/includes.asp

Now when someone runs that page they will prompted to login. They will not be allowed access to that page until they successfully logged in as a Level 4 user.

Examples of managing Access Levels are provided in the "multiple_access_levels" folder included in the root of the Password System.
Look at the source code of the ASP pages in that folder with a text editor to see the working code. Again, It is quite simple to follow.

Protecting ASP Pages Using Groups

Please see the code generators in the admin are for the code to do that.

This article from my old powerasp.com site explains what Server.MapPath is and also why you can't use it to specify the data connection in any of the CJWSoft applications.

Use ASP to determine the Physical Path Of Your Virtual Website

As this article mentions you can still use it to determine the path, but you can't use it in our data connection strings because the data connection page is an include file and server.mappath will report back different paths for the different directories....... meaning it will work in one directory level but not another as the path will be different.

That’s about all I can tell you. It's just not something I support.

Hello,

I need to see if this is possible. I want to create a browsing system such that, the user selects a Province from a drop down list on the main page. Based the selection, the username of all the users in that province will be shown. Then the user can click on a specific username and his/her portfolio (photo album) will be displayed.

is this possible? If so, How can I do this, please help.

Thanks

Sean

(Password_Email_Confirmation_Mod) for ASPProtect Version 7.x

This will change the basic registration pages so that the email address and password entered must be confirmed when signing up. This eliminates the auto generated password during signup.

Some may prefer it working this way.

Directions:
Back up your existing ASPProtect installation.

Copy the two new files into your "users" folder

"register.asp"
"add_new_account.asp"

2005-12-01_182201_Password_Email_Confirmation_Mod.zip