When adding a new user I am taken to a form.

There are several "required fields".

First and last names are 2 of them.

This is not needed by me and I need the company name as a required field instead. I work and deal with company names, not individuals.

So, i am unable to add any users due to this.

How can I either do away with the names as a required field or swap the individual names with the company name as a required field?

I have customers wanting to be able to view their own stats, but I need to do away with the required fields to work with my customer base.

-john

I have noticed that during the file import, that some of the pictures get messed up.  I can import aroun 150 pictures into different albums, say 3 albums with 50 each.

I have noticed however that some of the get messed up.  What is happening is...the thumbnail will be correct, but after you click it the picture that shows up is one form a different album.

Any cure for this?

Good Evening,

I have been trying to log into my site using the protected pages comments you have in support. I have copied the code in the ASPprotect 7 guide.

<%@ LANGUAGE="VBSCRIPT" %>

<!--#INCLUDE FILE="check_user_inc.asp"-->

and pasted it in my page, set the the IIS to open this page and the page will not open it and the page will not open and the error is

Error Type:
Active Server Pages, ASP 0126 (0x80004005)
The include file 'check_user_inc.asp' was not found.
/olem/reldt/introduction.asp, line 3

When I remove the two lines of code everything goes normally.

I have aspprotect in its own directory in the website. I have read the installation several times and I am afraid I am missing something blatently obvious so I really appreciate you thoughts.

I am presently using redirects. I like not haveing to use them as your comments have suggested. I have pulled all that code from the pages I desire to protect during this test.

I have three test users in my database - 1 administrator

Any suggestions?

Thanks and best regards

All fixed and working

Thanks

Hello,

My guess your having trouble setting up a system dsn because the database has a password set on it. Your hosting company most likely sets up DSNs without using the advanced tab which is where the authentication information goes. Or they have some sort of web interface for the customers to use that doesn’t allow setting up that information.System DSN’s are actually difficult to set up correctly when the database has a password on it. There is of course a password on the database for security reasons so if someone ever downloads it somehow they will not get your information.

System DSN’s are not the way to go regardless as you will see mentioned at our support site.

http://support.cjwsoft.com/forum/forum_posts.asp?TID=9&P N=1

You really should try setting up a DSN-less connection. It is the best way to go. They are easier to set up, perform better, and are less load on the server. Any host that wants it customers to use system dsn’s is not on the ball as far as server performance and server resource conservation goes. They are really asking for trouble down the road.

All you need to do to make dsn-less connection is the following.

Get permissions set for the folder the database is in (by your host)… then figure out the physical path on the server to the database by using server.mappath or you simply ask your host for the info.

An article I wrote on using server.mappath

http://www.powerasp.com/content/hintstips/physical-path.asp

Then your connection string will look something like this.. (of course you edit the path to match what server.mappath tells you. And you make sure the database name is correct)

ListingsConnectionString = "DBQ=C:\Inetpub\wwwroot\asplistings\_database\asplistings_ac cess2000.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp"

Another option would be to simply remove the password from the database using MSACCESS.. then try to connect to it using a System DSN without the password. If your host is storing the databases outside of your web in the root of the server then removing the password on the database is not that bad of a thing to do as there is no way anyone will be able to dload it from your site. Of course there is a still a performace loss when using a system dsn with an Access Database

check permissions for the user you are connecting to the SQL database.
http://support.cjwsoft.com/code/moreinfo122-1.htm

That user may not have permission to make new data

Also,  check all field and table settings manually by comparing them to the SQL creation script we provide. You may very well be missing auto increment and primary keys which would make adding new data not work.

It is most likely one of those two things.

you password protect an asp page in your site "where that is is up to you"

http://support.cjwsoft.com/code/moreinfo171-1.htm

then you link them there from your own pages

thats all there is to it

is that what you are asking?

Additionally...any page you password protect automatically becomes a login page... where you want to start and where you send them after or before login is something you have to handle on your own

Any pages you pasword protect will prompt the user for login info if they are not yet logged in that is.

Then once logged in it returns them to the same page they are showing the page content as it would normally appear.

thx, thats a known error I forgot about.

I just updated the zip archive so the error is gone but if you bought ASPBanner Unlimited Version 7.3 Before April/06/2004 you can optionally apply the fix.


To fix it (only if you want to use the option explicit method of calling banners and not even a really necessary fix as this is just an error in the generated code your supposed to use)

Just edit aspbanner/zones.asp with a text editor.

Where you see the double dim carefully remove one of the "dim" s and save the file.

cool.. let see if that works.  This was the command line that I had to enter in order for it to register.  Chris, as you stated before, you can try one of the other emailers, but you need a email server to tie to. 

"regsvr32 cdonts.dll"

pretty clever...

If anyone is interested in what the Mod function actually does this article explains it nicely. They even use it for the same purpose in the examples.

http://www.asp101.com/articles/steven/mod/default.asp

Noted:
I actually did not think you did.

As far as debugging goes.. thats all built into visual studio.net.
There is a tag you edit in the web.config file to enable project debugging
http://support.cjwsoft.com/code/moreinfo251-1.htm

Like I said though for changes to ASPProtect.NET I'd start off from scratch and stick with vb.net... using the visual.studio.net interface is not really vary hard to remove and change things you dont' need even if you are a C# coder. Especially simple stuff like you mentioned.

i will probably end up doing this myself, but dropping all the log data in a sql table would be nice as it offers much more flexibility on how an admin can keep track and use the data. Browsing through each log file is very inconvenient. I can search for text in the files (server-side, others with a shared server would probably have to separately download all log files first), but with the current method I don't have the following important options:

• cannot sort by any criteria
• quickly see a list of all login attempts by a specific user (i need to search each log file individually for this info)

if you had an option during setup perhaps (or elsewhere) in a future version that allowed an admin to specify the preferred logging method (separate files or a table in sql) i'm sure many admins would find it very useful to have a database alternative of keeping track of users becuase it would offer the two benefits listed above, plus more.

Humm, I dont see how moving to a new server could have anything to do with that.

What method of displaying the banners are you using. Perhaps try some of the other ones.

Don't use the javascript method with a javascript based ad like google.. that's for sure.

Is there any way to make the ads in ASPClassifieds end on a day of the week. I would like all of my ads to end on Sunday night and was wondering if there was a way to automatically do that in the database??

Thanks

Dave

the menu file.. "menu.asp" or something... just follow the logic of the code to find things like that. Look for server side include files and what not in the source code.

This is a good article on figuring out what pages to edit as well as other things.
http://www.powerasp.com/content/hintstips/common_sense.asp

If it was working and you changed code you could have possible messed up how all of that works... you may need to revert back and be really careful as you make changes testing every step of the way.

You would set the groups during users signup the same way you would do the expiration in the following example.

http://support.cjwsoft.com/code/moreinfo170-1.htm

The groups field need to be set the exact same way it would look like in the database of course

So, if a user was part of groups 1, and 2

You would look in the database and see this in the groups fields for that user

*1*,*2*

so in the signup code you set that like so

CmdAddUser.Fields("Groups") = "*1*,*2*"

This info only applies to resgitrations and signups using the "users" folder.
if you wanted to make different sceanrios you would need to carefully make a copy of the users folder and adjust it accordingly

umm.. rename the pages to ".asp"

After all these are ASP scripts we are dealing with and the product is called ASPProtect.

The web site says it is used to protect ".asp" pages

And the directions tell you to put the protection code on ".asp" pages.

ASP can not run in ".html" pages

If you do not know basic things like this you should really learn the basics of ASP before you try to use the application. I would suggest a good book or two. ASPProtect is for people that have at least some experience with Active Server Pages.

IT worked just as cwilliams said. I did see the IP address being stored in the table but it didn't dawn on me that it was tied in to the view count, I tried it from a different IP address and it worked great .

Good coding Christopher

Thanks

John

You would carefully use the built in features of access to import/export data.

The password for our databases is noted in the documentation. It's pretty hard to miss really. You can also see the database password by looking at the connection string info.

different versions may be different but it is usually "temp" minus the quotes

Yup everything looks ok - but why no error?

This just gets better - now the email a friend link says sent successfully and doesn't send out - what the heck...

What would cause it to 'think' it is doing the task yet still fail?

Hi Chris,

Our company has a big dilemma on how to manage the database for accounts that are expiring/expired.

We saw the function to email a batch of users who are expiring soon but this doesn't help us to complete the renewal process.

Once the email is sent, what happens afterwards? how can we setup the system so that we can renew their expiry dates or accounts without too much hassle?

The system currently doesn't have any renewal functions or to allow batch changes on multiple accounts at the same time so we have to manually edit one account at a time. This is extremely tedious if we have over 1000 accounts to manage (and we will).

If you have anything to suggest on all this I would appreciate it :)

Thanks alot
Sylvain

Hi Chris,

Alright.  We figured out how to work with both C# and VB, by creating a separate VB web project in VStudio, and then passing the aspprotectnet.dll to the C# project.

Ok.  I have another question:

How can our code determine the identity and user_id of the currently logged in user:

Is it Session["User_ID"].ToString() and Session["Username"].ToString()?

thank you

We have been using ASP Protect for a while now and are big fans of the program.  We received ASP Banner 8.2 with our puchase which we now have a need for.  I went to put the files on our webpage, and doing nothing else other than locating the directory there, I noticed differences with how ASP Protect operates.  We have customized it a bit and want to keep the 2 programs separate.  the login screen for one showed up on the other, and some ASP Protect pages appeared altered so i immediately deleted ASP Banner.  did I do something wrong, and how can i ensure the 2 programs work completely independant of each other?  We can't risk braking what we're now using but would really like to add banner functionality to some of our pages.  maybe an update to the program before we install?  puchase new software?  Thanks for your help-

that really does not make any sense...

I dont know what else to tell you as this really shouldn't be anything too difficult to sort out...

redirection based on criteria is not something aspprotect does by default... I try to help a bit... I've shown everyone how to do it in this thread...I know plenty of people doing it... I've done it myself... I know it works

let me ask you this... are you using ASPProtect 6 with the Option Pack ?
I assume you must be or you would not have the Groups feature ?
And you asked this question in the ASPProtect 6 section.

but then maybe your using 7.. I do not know

this should all work the same either way

I'm using Aspimage and SQL. Photos are 2464 x 1632 px, tried the upload and import directory methods, same results: thumbnails ok, full images 0 bytes.

ServerSoftware Microsoft-IIS/6.0
ServerName www.larrysampas.com
ServerProtocol HTTP/1.1
PathInfo /gallery2/extras
PathTranslated d:\Customers\user1095000\www\gallery2\extras
 
FILE SYSTEM OBJECT Installed
ADODB (ActiveX Data Object) Version: 1.2 Installed  
CDONTS Version: 2.80 Installed  
SMTPMail Version: SMTPMail Retail Version V2, 2, 1, 0 Installed  
JMail Version: 4.1.2 Installed  
AspEmail Installed
AspMail Installed
SAFILEUP Installed
Dundas Upload Not Installed  
ASPImage Version: 2.31 Installed  
AspJpeg Not Installed  
ImgWriter Not Installed  
 
Script Engine 
Type VBScript
Version 5.6
Build 8515

This is a great article from my old powerasp.com site.
Connections And Server Database Permissions

I think I've got it to work somewhat.  I modified the 2checkout1 & 2 asp file to use and pass Product_id.  It now identifies the product correctly.  I'm good fo now. Thanks for the info though.

-Jason

False alarm. Dumb user alert (both the classifieds customer and me).

When I test fixes, I need to be looking at the right Ad_ID to get correct results

((TITLE EDITED BY ADMIN))


it would be nice if there was an option for login abuse, where a login account would be flagged if it logged in from x number of different IPs over a period of time. I know many have dynamic IPs, but there's got to be a balance between legitimate logins and logins that are 'shared' for the sake of saving money (I sell subscriptions), in the end costing me.

Maybe searching the first two number groups in the IP (example, 209.168.*.*), and if finding more than an admin specified number of logins per week from IPs with different first two groups, the record would be flagged or locked...

One last thing..

This is bad

http://www.bones.myftpsite.net/rfamilystuff/pictures/

there are .asp files in there people can run that you dont want people running..

u should delete the asp files in there or turn off directory listing...

take care,

CJW