I really do not know for sure, but I imagine there are customers using their windows hosting. Usually I do not know what hosting company a customer uses and I am usualy the only one that responds to forum questions.

Why not download the current Free lite version and try it out ?

CJW

yes, How can I have fixed size height and width image without distortion. Is there a component that I can use or how can I change the existing code.

yes, unless its ratio matches

how could it not be ?

Please keep questions like this in the forums... thx.
there is no need for this to be a private message

-- Previous Private Message --
Sent by : eeye
Sent : April/29/2005 at 2:19pm


If I choose fixed width and height is the thumbnail image going to be distorted?

-- Previous Private Message --
Sent by : cwilliams
Sent : April/29/2005 at 1:17pm

that is not possible unless you rewrite the code.

You onlyahve the two options we give in the config file for thumbnails

fixed width and height all the time

or

fixed width / dynamic height



-- Previous Private Message --
Sent by : eeye
Sent : April/29/2005 at 1:07pm

Hi William

One more questions for you. is there a way to make sure that all the thumbnails are the same size without distorting the images (in the thumbnails). Or if a picture's height is bigger than its width is there to create the thumbnail such that the height of the orginal becomes the width of the thumbnails and vice versa.

Basically I just want the thumbnail pictures to be in a perfect row with all the picture heights the same and all the pic width the same.

Thanks

Sean

one thing to note... the time period we are talking about is going to to be whatever you have the session timeout set at in the settings.

perhaps making that value lower like 10 minutes is an option for you.. and might help to deal with situation

No can do.  In both cases there is an icon that says "Not uploaded".  I click in it and nothing happens.  There is no link to upload.  Am I missing something?

By the way, I appreciate and am impressed with your rapid response. Thanks.

Upgrade from V6 to v7.x with an MSACCESS DATABASE

1st of all, backup your existing ASPProtect files and database before performing this upgrade. Please be really careful while performing this upgrade. Version 7.x  is a highly advanced application compared to any previous versions. CJWSoft under no circumstances is responsible if you lose information or have website downtime.

BOTTOM LINE: (PERFORM THIS UPGRADE AT YOUR OWN RISK)

To do this upgrade you're going to need to have the Microsoft Access Application.
To work with an Access .mdb file it can not be newer than the version of Microsoft Access you are running.

That being said, on with the upgrade..

Open you're existing Acccess Database up in Microsoft Access..
You should see this something like this.



By right clicking on then choosing rename
Rename "Users" to "ASPP_Users"
Rename "Groups" to "ASPP_Groups"

If you do not have a "Groups" table do not worry about it right now.

Now right click and DELETE the Config Table.
Yes, delete it..

You should now see this. (with or without the "Groups" table)



Now, right click on "ASPP_Users" and go into design view.
It should look like this.


Rename the "Password" field to "Old_Password"
Be sure to spell it perfectly using the Underscore
It will look like this.


Now scroll down to the bottom a bit It should look like this.



Now..

If you have a "Groups" Field... leave it alone
If you do not have a "Groups" Field add one and make it a memo field.

Now, we are going to add a few more new fields.

Add a field called "Redirection_URL" make it a "text" field with 150 field size
Add a field called "PayPal_Subscriber_ID" make it a "text" field with 100 field size
Add a field called "Newsletter" and make it a yes/no field
Add a field called "Password" and make it a "text" field with 100 field size

It should now look like this.
(you do not need to worry about the field descriptions.. that part is optional and only seen when working on the database)



Now close that window and save the changes..

Your now going to open up another Access Database while still leaving the one you have on your screen open. You going to open up one of the new databases that came with v7.x. This database has some info we are simply going to copy and paste.

You'll want to open it and put it side by side on your desktop like so.
(the old database is on the left.. the new one is on the right)



Now, for the fun part.

On the new database to the right.. right click on the "ASPP_Config" table and pick "Copy"

Then move your mouse over to the old database on the left. Right click in the open white area and click "paste"

It will ask you for a database name. Type in "ASPP_Config"
Leave "Structure and Data" checked and hit OK

Your old database on the left should now have a nice new "ASPP_Config" table.

OK, now for the "ASPP_Groups" table

If you already have a "ASPP_Groups" table in your old database you are done.

If you do not have one your going to copy and paste the table from the New Database to your old database just like we just did with the "ASPP_config" table.

Your old database should now look like this.



Now, you are done upgrading your database from within Microsoft Access.

The existing passwords still have to be encrytped and moved from the "Old_Password" to the "Password" field

To that we have a special page we run in the application that will take care of that.

So, for now... go install the application, but using the database we just created.
Follow these instructions for the most part...
http://support.cjwsoft.com/forum/forum_posts.asp?TID=181& ; ;PN=1

When you get to the part where you finally get into the admin area and need to make an admin account you will notice that your existing user database is there but none of the users have passwords if you look at them in the edit screen.

That is normal. Simply do what the instructions say and create and admin account using a username that does not exist..

Then log off... then back in as that new admin account. If that works you are ready to convert the passwords.

This part is very easy.

You want to run a special page via the browser.

http://www.mysite.com/password_admin/convert_to_encrypted.asp

Replacing the part in blue with your website info.

Once you get the page running you will see a login prompt and one form field just like before with the "get_me_in.asp" page

You will need to paste the "PasswordEncryptionKey" value that you used in the "config_inc.asp" file in the form field and hit enter.

If all goes well you will see a page telling you to click here to encrypt the passwords and copy them over.

So do what it says... dont click more than once and wait.

Eventually it should say it is finished. So go log in to the admin area of the system using the new admin account.

Now edit some users but dont save... you want to see if the passwords are showing up. If they are the conversion worked. If you see nothing or a garbled mess it did not work and you made a mistake during this whole process.

If things went well backup and delete the conversion file below.

http://www.mysite.com/password_admin/convert_to_encrypted.asp

You do not need it anymore.

Once you are positive every thing is running smoothly and everyone's passwords are ok you can go in and delete the "Old_Password" field as well.



If things didnt go well.. try again from scratch and go slowly.
If they still dont go well get ahold of us for help.

We are here to help, but if you really want us to we can be hired to do the conversion.

Different Versions of the Access Database

Below is a zip file with many alternate versions of the Access Database provided to help with installation and general usage.

2005-02-20_155310_ASPProtect_Database_Versions.zip

ASPProtect.mdb is saved as an Access97 database (password "temp")
ASPProtect_access2000.mdb is saved as and Access 2000 database (password "temp")
ASPProtect_access2000.mdb is saved as and Access 2002-2003 database (password "temp")
ASPProtect_access2002_no_password.mdb is saved as and Access 2002-2003 database with no password set on it

Try to use the newest version as server odbc drivers sometimes have to use the newest version for everything to work correctly. No password version is provided because sometimes there are issues connecting to a database with a password set on it.

Default username for access databases is of course "admin" but you really dont use that except in the data connection information.

OK, well, that error is pretty self explanatory really. There isn't anything else it could mean.

What you showed me in that screen shot all looked correct, but still permissions to that file just can't be correct. The paths are correct. The path to the file looks correct. The ASPNET (ASP.NET) account looks correct.

I would try settings permissions directly on that XML file. Perhaps child permissions did not go through the way you intended. (the advanced tab must be used for that) If that doesn't work try giving ASPNET and Everyone full permissions on the file directly.

Possibly check the paths in the web.config file just for the heck of it.

Last case scenario, you can edit that XML file directly instead of using the screens in the application. Of course if that file does not have correct permission chances are other things like log files will give you issues as well.

That is all I can think of right now.

It's not working because i guess im copying the viewstate also...and it comes up

Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster.

The problem was that I did not have

ConnectionString = "Driver={Microsoft Access Driver (*.mdb)}.... in the connection string.

Thank You.

SQL Server Datareader Datawriter Permissions..

here is a screenshot that shows how to set datareader and datawriter permissions on an aspbanner database using "SQL Enterprise Manager"

In this example we are making sure the aspbanneruser has those permissions on the aspbanner table in the database

Our knowledge base which is hosted at a remote location is protected by ASPProtect Full Version 6. I would like to allow our employee to access the knowledge base from within our internal network unchallenged. Is there a way which I can modify the code "check_user_inc.asp" to allow any one coming from say 10.1.X.X to access the site unchallenged?

Thanks,

Mo

If the physical path isnt right and the permissions are not right it just plain will not work. You will not get an error.

If the filesystem object is disabled on the webserver it will not work either.
Something has to be wrong.

Please start a new thread when the topic changes.. thanks

It helps to keep the forums organized for other users in the future.

Is there a way to set various members to upload a limit of photos. So, one member can only upload 5 photos in 1 album and another can upload 30 photos in 2 albums. Even if you just set a permission for the number of uploads for each member.

Thank you

how you connecting... lets see the connection string...

could be permissions related too.. if they are not set correctly
(always give them to the folder, never just the mdb file)

Some of this might help...

http://support.cjwsoft.com/code/moreinfo11-1.htm

http://support.cjwsoft.com/code/moreinfo136-1.htm

http://support.cjwsoft.com/code/moreinfo56-1.htm

you may want to download some of the different versions of the access database from the support area and try connecting to them as you may have older odbc drivers on the server

You may also want to try to get ASPTest from our website working before you go any further

been working on this for about 5 hours today.. I think I found the problem and it involves a vbNullChar that the encryption process is creating only during login attempts

it then messes up during ASPProtect authentication because it blows up the SQL Statement to the database

like I mentioned before the chances off this happening are slim but possible as two people so far have been able to create the situation

I seem to have the HANNAH password working now using your encrption key

I need a little bit more time to clean up the files I have been working on. Then I will give you new "check_user_inc.asp" and "check_admin_inc.asp" files to try out

noted.

1.) this has been explored and because of the way groups works is not feasable. Because us this I wrote code to allow you to view and sort all users for any group on the actual groups page. You pick a groups and then click the "Show Users" button

2.) noted

New question...

When someone edits their personal information, such as address, is there any way to set it so that someone in the office can receive an e-mail noting the changes?

Thanks.

Does ASPprotect support Paypal's Website Payments Pro option, where a user can use a credit card directly on a web site, without passing to paypal.com?

Nick

How to bring up the Code Generators

Simply go to the zones screen.
Select a Zone from the list.
Check the "Show Banner Code" option.

Click on "Display Banners in Selected Zone"

I just purchased the software and it looks great however, I have been fighting for 4 hours trying to get a protected page to do what it is supposed to.

I was trying the examples you provided and they worked fine, then I would use the code at the top of my pages with no luck.

When I installed the software, I used an FTP package as I have found lately that anything with a database gets all messed up when I publish with FP.

On a whim, I took the page I was publishing in FP and published the same page with my FTP program.  It worked!  What I can't figure out is what FP does to the files to screw them up so they won't function.  Is there a setting in FP that I have to change to get it to work?  The files look the same, but they are different sizes when I overwrite them with FTP.

Any ideas?  I don't want to have to publish my entire site with FTP as it is a FP template site.

Thanks,

Dave

  Hi, we purched ASP Protect a few months back and had it installed on our hosting company under a "temporary" domain name -- cidrasensors.com

We are now about ready to switch this development site over to production and I need to change the domain from cidrasensors.com to cidra.com

My hosting company wants us to create a new accounting and re-set everyting up.

So...based on this, I have a few questions for you:

1. Do I need to re-install the software? or can I copy from one account to the other?

2. Assuming I can copy the software to the new account - are there changes that will need to be made to point to the new domain?

3. If I decide I wanted to keep the first account alive for development purposes (never turn on the website domain to the public) - would I need to have a seperate ASP Protect license? 

4. If I decided to ask you to do the transfer for us - is that covered in the $20 Installation fee I saw on the web?  

OK, thanks.

Nick

Hello,

no default setting for something like that... what your thinking about doing is on the right track I'd say

Larry,

I have a new computer up and running and am back on the Internet full time. I am here to help when you are ready to continue with this.

I went to your site to look around and "try it" like you mentioned but I can not really try anything as the admin username/password seems to be something other than the default

I am still a little confused... one thing I would like to mention is that the passwords in the aspprotect database are encrypted... meaning you cant just add a password to the user database by hand because it wont be the encrypted value and wont work.

It is something the application takes care of when you add a user via the web based interface.

You can however still add users manaully or with careful import/exporting... but you will have to use the existing password conversion technique which is covered at the end of our upgrade instructions in these forums.
http://support.cjwsoft.com/code/moreinfo174-1.htm

Basically you want to add a field to the "ASPP_Users" table called "Old_Password" and that is where you enter the password in plain text. Then after you are finished adding users to the database manually you do this.

You want to run a special page via the browser.

http://www.mysite.com/password_admin/convert_to_encrypted.asp

Which will convert the passwords to the encrypted value for you.
See the bottom of this thread for all the info on that.
http://support.cjwsoft.com/code/moreinfo174-1.htm

My hosting company uses ASPEMAIL - and I am trying to setup the mailing settings on ASPPROTECT - but cant seem to get it to work.   I've tried many different options - here are two that are the closest - but have issues:

1. If I use the settings:

email component: aspemail

Mail remote server: my internal server name

*no smtp authentication

email mail notification - my email address on my internal server

***I get the following results:

       I can get get notified when a new user logs in, email a user from aspprotect user screen if they are in my company and have a valid email -- but I can not send to the outside world - I get an relay prohibited error.

2. If i try to change the setting to use the Hosting Website email server - I get the following results:  I dont get notified when a new user registers, I cant send to internal company people - but I can send to the outside world.

**any suggestions on what to do? I'm trying to work with the people who manage the mail servers - but since I dont know anything about them - its a bit difficult.

[/QUOTE]

The relay error is because when you send emails outside your email domain smtp authentication is required.

I suggest trying to use CDOSYS with the smtp authentication option. CDOSYS is on all servers by default and is really the way to go. Use a real email account and password to send the emails through the server.  Be sure to check smtp authentication for cdosys and to specify all that info for your email account and password in the settings screen.

If you want to know about CDOSYS read my article.
http://www.powerasp.com/content/new/sending_email_cdosys.asp

Christopher

Found this but I dont really know what to do with it or even if its the right thing.

<%
'=========================================================== ==================='

' Application:     Utiity Function
' Author:          ; John Gardner
' Date:         & nbsp;  20th December 2004
' Description:     Used to check the validity of a postcode
' QueryString:     None
' Version:         V1.0

' Required routines:        &nb sp; None
                    
'----------------------------------------------------------- -------------------'

function Check_Postcode (byRef strPostcode)

' This routine checks the value of the form element specified by the parameter
' for a valid postcode.

' The definition of a valid postcode has been taken from:
' http:'www.royalmail.com/docContent/other/Downloadable_Files/ PAF_Digest_Issue_5_0.pdf

' If the element is a valid postcode, the function value is returned as TRUE
' and the postcode is returned in uppercase with the separating space in the
' right place.

  Dim strPostcodeRegExp(2)   ' holds the regular expressions for valid postcodes
  Dim intCount        &nbs p;      ' For loop counter
  Dim strPostcodeCopy        ' Copy of postcode
 
  ' Variables used to hold regular expression object  
  Dim objRegExp, objMatches, objMatch
 
  ' Expression for postcodes: AN NAA, ANN NAA, AAN NAA, and AANN NAA
  strPostcodeRegExp(0) = "^([a-z]{1,2}[0-9]{1,2})([0-9]{1}[abdefghjlnpqrstuwxyz]{2})$"

  ' Expression for postcodes: ANA NAA, and AANA  NAA
  strPostcodeRegExp(1) = "^([a-z]{1,2}[0-9]{1}[a-z]{1})([0-9]{1}[abdefghjlnpqrstuwxyz]{2})$"
 
  ' Exception for the special postcode GIR 0AA
  strPostcodeRegExp(2) = "^(gir)(0aa)$"

  ' Copy the parameter and convert into lowercase
  strPostcodeCopy = Lcase(strPostCode)
 
  ' Assume we're not going to find a valid postcode
  Check_Postcode = false
 
  ' Strip out spaces
  strPostcodeCopy = Replace (strPostcodeCopy, " ", "")
  Check_Postcode = False
 
  Set objRegExp = New RegExp
 
  ' Check the string against valid types of post codes
  For intCount = 0 to Ubound(strPostCodeRegExp)
 
    ' Check next pattern in list
    objRegExp.Pattern =  strPostcodeRegExp(intCount)
    If objRegExp.Test (strPostcodeCopy) Then
   
      ' Post code found. Ensure input parameter is in correct format.
      Set objMatches = objRegExp.Execute (strPostcodeCopy)
      Set objMatch = objMatches(0)
      strPostcodeCopy = Ucase (objMatch.subMatches (0)) & " " &  Ucase (objMatch.subMatches (1))
     
      ' Show that we have found the postcode
      Check_Postcode = True
    End if
  Next
 
  ' Ensure that the uppercase postcode gets returned if valid
  If Check_Postcode Then strPostcode = strPostcodeCopy
 
End Function
%>

regards

John

Really, only you or your hosting company would know that information...

It is usally installed in the "_database" folder but the physical path including the drive letter  to that can only be known by asking your hosting company or by using server mappath to learn the path on you own.
http://www.powerasp.com/content/hintstips/physical-path.asp

That folder also needs special permissions. The permissions it needs are covered in the documentation for the software and generally only your hosting compnay can set those permissions.

The online support forums here are full of information and resources on correctly setting up data connections. It is ASP 101 and something you really need to have an understanding of.

I am happy to answer questions and try to help, but if you dont want to deal with it or can't we do offer installation services.

http://www.cjwsoft.com/installation_service.asp