ahhh ok.. I was going to wait till morning to answer this one..

glad ya figured it out

Chris, that fixed it.  Found 2-references to guestbook2 in the file show_messages_inc.asp located in the \guestbook\ directory.

Suggestion for future release.  Create an option to email the admin when a message is posted.  If this code already exists please advise.

Thanks, Lance

These are 4 valid examples of calling a flash movie.

The more simple examples may cause problems for people that don't have the flash plugin installed. I really do not know as I am no flash expert. All these work fine for me. Of course I have the latest flash plugin installed. Perhaps some of you can shed some light in this. The 3rd and 4rth examples are obviously only slightly different and mention different versions of flash as far as downloading the plugin goes.

<EMBED src=" http://www.aspbanner.com/test/aspbanner/images/banners/power asp.swf" WIDTH="468" HEIGHT="60">

<object width="120" height="22">
<param name="movie" value=" http://www.aspbanner.com/test/aspbanner/images/banners/power asp.swf">
<embed src=" http://www.aspbanner.com/test/aspbanner/images/banners/power asp.swf" width="468" height="60">
</embed>
</object>

<OBJECT classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase=" http://download.macromedia.com/pub/shockwave/cabs/flash/swfl ash.cab#version=6,0,40,0"WIDTH="468 " HEIGHT="60" id="myMovieName">
<PARAM NAME=movie VALUE=" http://www.aspbanner.com/test/aspbanner/images/banners/power asp.swf">
<PARAM NAME=quality VALUE=high>
<PARAM NAME=bgcolor VALUE=#FFFFFF>
<EMBED src=" http://www.aspbanner.com/test/aspbanner/images/banners/power asp.swf" quality=high bgcolor=#FFFFFF WIDTH="468" HEIGHT="60" NAME="mybannername" ALIGN="" TYPE="application/x-shockwave-flash" PLUGINSPAGE="http://www.macromedia.com/go/getflashplayer">
</EMBED>
</OBJECT>

<OBJECT classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase=" http://active.macromedia.com/flash2/cabs/swflash.cab#version =4,0,0,0" ID=banner WIDTH="468" HEIGHT="60">
 <PARAM NAME=movie VALUE=" http://www.aspbanner.com/test/aspbanner/images/banners/power asp.swf">
 <PARAM NAME=quality VALUE=high>
 <PARAM NAME=bgcolor VALUE=#FFFFFF>
 <embed src=" http://www.aspbanner.com/test/aspbanner/images/banners/power asp.swf" quality="high" bgcolor="#3CBDCD" WIDTH="468" HEIGHT="60" TYPE="application/x-shockwave-flash" PLUGINSPAGE=" http://www.macromedia.com/shockwave/download/index.cgi?P1_Pr od_Version=ShockwaveFlash">
</OBJECT>

This article from my old powerasp.com site explains what Server.MapPath is and also why you can't use it to specify the data connection in any of the CJWSoft applications.

Use ASP to determine the Physical Path Of Your Virtual Website

As this article mentions you can still use it to determine the path, but you can't use it in our data connection strings because the data connection page is an include file and server.mappath will report back different paths for the different directories....... meaning it will work in one directory level but not another as the path will be different.

After understanding how the count works i checked the IP in the db.  They are all set to the same IP (my web server) no matter what ip is doing the viewing.  This is probably due to my ISA2004 firewall that is posting the ip address of the web server with each log on.  So, can you help me with where the code would be to modify so the db does not get updated?  I risk the refresh problem, don't think it is an issue with me.

Thanks,

If logfiles do not get created it is most likely one of 3 things

1. invalid physical path specified
2. permisssions
3. filesystem object is disabled on the server

that path doesn't look correct to me for a live professionally set up server but only you or your server admins can know that for sure

you will not get any errors when things arent perfect.. just no physical logs

RecentActiveUsers and RecentPageRequrests are not related to the stored logfile feature.. Recent Activity is a different thing

My ISP uses ASPSmartMail. The email confirmation works except when I try to register an AOL user the server returns an error 500.

I am using v7 with other software written in ASP.NET. When I include the the "checkfor" and include file, I'm receiving a compliation error.

Here is the include I have on the .aspx file:
<% CHECKFOR = "4" %>
<!--#INCLUDE FILE="../../ASPProtect/check_user_inc.asp"-->

Here is the error:

nope ,sql server has nothing to do with this

I am talking about the folder pictures are stored in.. it needs modify permissions set for the internet guest account like those articles talk about

Hello- I am trying to install the ASPPROTECT product and tried to read all the docs but still am getting the following error:

[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x1980 Thread 0x1458 DBC 0x223c374 Jet'.

I understand about the physical path for the DSN-less connection and followed the example given. I got in touch with tech support for the host of my site and the give me the following as a physical path:

c:\sites\Single20\laptv1\database

Some observations:

1.- The database directory is outside the root dir but I think I am accounting for it with the path

2.- The permissions are ok

Any ideas?

Thanks

FP

ok,

when you say "we have set up to use the Subscription services exclusively for all new members "

I am sorry to have to ask this again but what does that mean exactly ?

how was that accomplished ?

The reason I say this is because when a subscription is created by a user through the normal channels.. meaning they went to the paypal subscription directory and either started a new account or found their old one to start a subscription with.. either way the PayPal Subscripber ID that paypal assigns is added to the database for that user and the expiration date is set to null.

Now, that being said the function that sends expiration emails to users will NEVER send an expiration to a user that has info in their PayPal Subscriber Field in the database. I just double checked that.

So that is where I am confused ? How did all these users get set up to use subscriptions and not have the PayPal Subscriber ID field popluated in the database ?

Seems to me the only way this could happen is if you set some stuff up manually and the PayPal Subscriber ID for each user never got put in the database. That and the expiration date didnt get set to null.

Again, I am sorry to keep asking this but it just seems to me that something else must be going on that I am not clear on regarding how you upgraded these people to use subscriptions.

In the end I think the answer may be to manually make sure each old user now using subscriptions has their PayPal Subscription ID set in the database as well as their expiration date from before set to null.

thats not good.. its a web server configuration issue of some sorts ?

post is a common method for forms.. if it is not supported it is something you should ask the server admins about.

Is this a windows based web server running true microsoft ASP because that error is usally associated with non windows IIS based web servers from what I can see by doing a google search ?

ASPProtect only runs on windows servers running IIS and True Microsoft ASP.
http://support.cjwsoft.com/code/moreinfo165-1.htm

My guess is your web server is running Apache Unix or something like that.

I am trying to find out where I can enter the ttle for the application.

There is a variableor field called App_Name into which it would be good to insert a generic name. Can this be edited?

I have searched high and low but cannot find anything to do with it.

The only major usability issue I've found to date is multi-zone banners. Cloning is helpful to a point, but then if you have a change to that banner, you have to make the change 6 times or what have you. I think, even at the expense of speed, multi-zone capability for a single banner would be excellent addition. Of course, that supposes I haven't just missed it and it's already there.

See, and that's what I thought.  What's interesting is that if I call either an aspx page or an asp page in the iframe tag, it asks me if I want to open the page, it doesn't display it.  I'm using IE6 so there's not problem with the support for the tag.

I'll keep looking to find out what's going on. I think the iframe method might work best.

JDooley

Hi -

We are trying to set up ASPProtect 7 so that the user is redirected to a specific web page based on their group membership.

For example, immediately upon successful login:

Group 1 members are directed to page A
Group 2 members are directed to page B
Group 3 members are directed to page C

Users will only ever belong to one group.

We tried to use the Redirect_URL feature but it causes the browser to loop.

Could you let us know exactly how to do this.  We are not ASP programmers and need to work from an example.

Thanks!

humm, I dont know.

If you want me too I would be glad to go into your web site and troubleshoot. If so PM me the info I need and I will take a look and see if I can figure it out.

CJW

Thanks.

Nick

Thanks Chris.

Your solution worked!

Christopher,

Thank you again Sir. Your quick responses and helpful demeanor add greatly to the value of your software.

While attempting the database connection test, I receive the following error:

Server Error in '/' Application.

---

Security Exception

Description: The application attempted to perform an operation not allowed by the security policy. To grant this application the required permission please contact your system administrator or change the application's trust level in the configuration file.

Exception Details: System.Security.SecurityException: Security error.

Source Error:

An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.

Stack Trace:

[SecurityException: Security error.] aspprotectnet.DBConnectTest.Page_Load(Object sender, EventArgs e) +0 System.Web.UI.Control.OnLoad(EventArgs e) +67 System.Web.UI.Control.LoadRecursive() +35 System.Web.UI.Page.ProcessRequestMain() +2112 System.Web.UI.Page.ProcessRequest() +218 System.Web.UI.Page.ProcessRequest(HttpContext context) +18 System.Web.CallHandlerExecutionStep.System.Web.HttpApplicati on+IExecutionStep.Execute() +179 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +87

no, that system only works with ASP.NET code.

Currently it can not possibly work with classic asp.
PayPal made it a nightmare to use and work with.

Special things regarding the signing of digital certificates also need to be installed on the web server so if it isn't your server your also out of luck.

you actually dont touch any of those
UploadDirectory = CmdGetConfiguration("UploadDirectory")
They get set from the config table in the database which gets edited in the admin area.

so...

I am talking about the settings area in the admin area of the applicaton.
Every setting there is descibed in detail. You get there and change serttings there via the web browser and by logging in as the admin.

Log in to the online demo as admin and check out the settings area if you are confused.
http://www.aspphotogallery.com/demo_pro.asp

I am testing this now and there is something wrong.

PayPal is hitting the ipn.asp but the database is not being updated.

I will figure it out shortly though and post the anwer here.

When a new user adds themselves to the db thru the registration page, no user id is assigned in the User_id field.  I can't access the page on-line due to an user_id related error on the page.  I must use access itself and add the user id.  After that, everything works as expected.

What have I done?

I'm using the groups protect feature on my pages. None of them seem to close the session after clicking 'logoff'. I can tell because if I hit the back button and return to the group-protected page, hit 'refresh', the page refreshes, I'm not asked to log in again.

On the other hand, when I open a page that's protected by an access level and click 'logoff' (uses same logoff asp file to logoff), it seems to work fine - if I go back a page and refresh, it asks me to log in.

Just wondering - is anybody else having problems like this? Maybe I screwed something up in the few adjustments I made a while back. Any idea what it might be?

in the version you have changing it is not something we covered

I believe you will find it the "config_inc.asp" file in the root though... be careful with naming it though because if you use any spaces or weird characters it might cause issues with various functions in the application like emailing.. I recommend just using letter, numbers, and maybe dashes

Session.LCID = 2057

(User Search & Contact Mod) for ASPProtect Version 7.x

This will allow an individual user to search for other users as well as email or call them.

Notes: This is a down and dirty mod. The users page from the admin area was used as a starting point. I then edited it up real quick to be used as a user search. The way it is it shows the user email as a regular email link. If you want to set it up so emailing is done from the application and emails are not actually shown you will have to do some extra work. If you don't want phone numbers shown you will have to remove that column which is not very difficult.

Directions:
Back up your existing ASPProtect installation.

copy "search.asp" into your "users" folder

2006-03-10_143253_User_Search_Contact_Mod.zip

Direct your users there. They will have to be logged in to view the page.

WARNING: This has not been extensively tested for SQL Injection attacks.
I think it is perfectly fine the way it is by looking it over quickly, but use it at your own risk.